👉 Fasttech Pro Autokit: www.fasttechstore.com/tools/fasttech-pro-auto-kit 👉 Fasttech Pro Toolkit: www.fasttechstore.com/tools/fasttech-electronics-repair-toolkit 👉 Thermal Paste: www.fasttechstore.com/tools/thermal-grizzly-kryonaut-extreme-2g 👉 PS3 CECHAXX Mainboard + Logic Board: www.fasttechstore.com/playstation-3-parts/ps3-cechaxx-mainboard-disc-drive-logic-board-cok-001 👉 Hard Drive: www.fasttechstore.com/playstation-3-parts/1-tb-ssd-hybrid-25-hard-drive 👉 PS3 Casing: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-models-a-b-c-e-shell 👉 PS3 Casing Top Cover: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-models-a-e-cecha01-and-ceche01-top-cover 👉 Disc Drive: www.fasttechstore.com/playstation-3-parts/kes-400-blu-ray-disc-drive 👉 Disc Drive Data Cable: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-blu-ray-drive-data-cable 👉 Disc Drive Power Cable: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-blu-ray-drive-power-cable 👉 Disc Drive Logic Board (BMD-001): www.fasttechstore.com/playstation-3-parts/bmd-001-disc-drive-logic-board 👉 Memory Board: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-models-a-c-e-memory-board 👉 Power Supply: www.fasttechstore.com/playstation-3-parts/aps-226-power-supply 👉 Network Adapter: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-model-a-c-e-wireless-board-7dszb 👉 Antenna: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-wi-fi-antenna 👉 Power/Eject Board: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-models-a-b-c-e-control-board 👉 Fan & Heatsink Assembly: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-models-a-b-c-e-heat-sink 👉 Heatsink Clamps and Screws: www.fasttechstore.com/playstation-3-parts/sony-playstation-3-heat-sink-clamps 👉 Cooling Fan: www.fasttechstore.com/playstation-3-parts?category=Fan 👉 Thermal Paste (Large Quantity): www.fasttechstore.com/tools/thermal-grizzly-kryonaut-extreme-thermal-compound 👉 Compressed Air Can: www.fasttechstore.com/tools/disposable-compressed-air-duster-35-oz Other PS3 Videos: ▶PS3 CPU AND GPU DE-LID GUIDE: kzread.info/dash/bejne/ea6Bz8twdpmbp7Q.html&ab_channel=fasttech ▶PS3 CECHG Repair Guide: kzread.info/dash/bejne/eZuDu6iIabPKo9Y.html&ab_channel=fasttech ▶PS3 CECHH Repair Guide: kzread.info/dash/bejne/dHh3k7FxnbzAisY.html&ab_channel=fasttech ▶PS3 Slim 2000 Repair Guide: kzread.info/dash/bejne/hWGZ2dxsZcm1fLw.html&ab_channel=fasttech ▶PS3 Slim 3000 Repair Guide:kzread.info/dash/bejne/k61rqbuSfc3VlLQ.html&ab_channel=fasttech ▶PS3 Super Slim Repair Guide: kzread.info/dash/bejne/aJVtt6-Yg5S6Zpc.html ▶PS3 YLOD Repair Guide: kzread.info/dash/bejne/p3WL0tOQYaupndI.html&ab_channel=fasttech ▶PS3 Controller Ghosting Fix: kzread.info/dash/bejne/noGF0deHgrWWYZs.html&ab_channel=fasttech 👉Need Help? FaceTime/Zoom Video Call Me: www.fasttech.ca/online-consultation 👉GET REPAIR SERVICE FOR YOUR DEVICE: www.fasttech.ca/electronics-repair ▶ Want us to fix your device for you? Just order the Fasttech Repair Box to send us your device by using this link: www.fasttech.ca/repair/repair-box 👉Business Social Media: Twitter: twitter.com/FasttechCA Instagram: instagram.com/fasttech.store Facebook: facebook.com/fasttechy 👉Follow me on Social Media Instagram: instagram.com/youngtechg VLOG CHANNEL: kzread.info/dron/F2IPXKRX5ctN9td1rhkzHg.html Twitter: twitter.com/Shehroz

To prevent your GoPro from overheating I recommend the perfect amount of thermal paste.

@fasttechvideo

Жыл бұрын

Hahahahha best comment so far.

@sonyx5332

Жыл бұрын

liquid metal all over the GoPro 😁

@an_ancient_gamer

10 ай бұрын

Lolol !

@abelgarza6433

Ай бұрын

Lol😂

greatest guide I’ve seen so far , in 2 days I’m going to replace my thermal paste hopefully every goes as planned 😅

@fasttechvideo

Жыл бұрын

Thank you. I really appreciate your comment. Please also like the video and subscribe for more tutorials like these. If you have any problems let us know.

@x-highrolla-x

Жыл бұрын

@@fasttechvideo my ps3 was running fine and i changed the thermal paste then it turned into the yellow light of death idk what to do :(

@fasttechvideo

Жыл бұрын

@@x-highrolla-x thats not good. I recommend using syscon to find what errors you are getting

@x-highrolla-x

Жыл бұрын

@@fasttechvideo could it have been that i didn’t put enough thermal paste ?

@fasttechvideo

Жыл бұрын

@@x-highrolla-x No. Most likely something is damaged on the board.

thanks. super helpful!

Appreciate the video. Gonna attempt this next week!

@fasttechvideo

2 ай бұрын

You are welcome. If it helps you like the video and subscribe

Mines a little different but I was still able to follow it. Thanks

@fasttechvideo

Жыл бұрын

You're very welcome. Please like the video and subscribe to help us back!

Thanks! Landed an awesome deal on an immaculate CECHC04 that was just running a little hot, and this got me and my partner through the rebuild and re-paste! So much cooler now, and I can actually watch shows without having the dialogue drowned out by the desperate cooler haha

@fasttechvideo

8 ай бұрын

Great to know 😊 Thanks for your comment Like, share and subscribe

Love the video, worked like a charm and easy to follow!

@fasttechvideo

21 күн бұрын

@@Quyix thank you now please make sure to like this video and follow the channel 😊

This is the most detailed video I have seen to date. Steps were explained that are normally glossed over. I’m not ready to do this type of thing to my own system but it looks like there are options. I’ve been avoiding using the system because it was in immaculate condition following a replacement from Sony.

@fasttechvideo

9 ай бұрын

Thanks for your comment 😊

Great video, ill attempt to do this myself one day. Thanks

@fasttechvideo

4 ай бұрын

Youre welcome. Please like the video subscribe.

26:24 is a very valid point. Subscription well earned, thank you for the awesome video!

@fasttechvideo

24 күн бұрын

@@BuggyGamesYT thank you so much for recognizing 😊

There has been a lot of new developements regarding the BC PS3 on psx-place that explains it all better than I can, but to delid the rsx isn't a good idea from what I've read.

@fasttechvideo

2 жыл бұрын

There is a risk of damaging the chips or other components while removing the IHS. What other dangers are there to doing this procedure?

Thanks a lot for this l’ve got a CHECHC03 (UK Launch model) on the way hopefully tomorrow and l’ll do this tomorrow to make it last as long as possible plus replacing the old thermal pads. (before anyone says, l’m aware it’ll inevitably fail on me but l’ll get someone else to do a Frankenstein mod on it since l’m horrible. This is so it lasts long enough that l can save up for that.)

@fasttechvideo

6 ай бұрын

You’re welcome 😊

i still have ps3 80-gb play can ps2 games it still work great no over heating yet I bought few years ago

@fasttechvideo

Ай бұрын

Nice

Thanks for a great video. What do you think about scalping the chips? Is it really necessary?

@fasttechvideo

Жыл бұрын

You're welcome. Please like the video and subscribe for more content like this. What do you mean by scalping the chips?

@Vandius24

Жыл бұрын

@@fasttechvideo Probably means deliding.

@fasttechvideo

Жыл бұрын

Since these systems are all now over 10 years old this is something that definitely has to be done eventually however it depends on the hours the system was used and the environment it was kept it. Regardless this is something that you will eventually have to do.

@fasttechvideo

9 ай бұрын

Heres a de-lid (scalping) video guide we did recently: m.kzread.info/dash/bejne/ea6Bz8twdpmbp7Q.html

Thanks!

@fasttechvideo

Ай бұрын

Thank you good sir. You are a gentleman and a scholar.

Thank you 😊

@fasttechvideo

Жыл бұрын

You’re welcome. Be sure to like the video and subscribe for more videos like these 😁

Did you do a vid where are you remove the IHS and replace the thermal paste underneath?

@fasttechvideo

Жыл бұрын

To be released soon.

@fasttechvideo

Жыл бұрын

The video is released now

Thanks a lot for this tutorial. It helped me sooooo much! Subscribed and video liked!

@fasttechvideo

2 ай бұрын

Thank you sir 😊

@fasttechvideo hello, I’ve been wanting to buy a part for my ps3 off the website provided but idk if the logic board (BD-400) will work on my KEM-410ACA disc drive p.s I have a CECHE01 MG PS3 but it came equip with that KEM-410A and I believe it was suppose to be a KES-400A

@fasttechvideo

11 ай бұрын

I believe this is the logic board you need: www.fasttech.ca/playstation-3-parts/bmd-006-disc-drive-logic-board-

@fasttechvideo

11 ай бұрын

Ceche01 MG (metal gear bundle) systems came with a double eye laser bd-410 drive.

I did this a couple years ago with the thermal paste and temps look good. I forgot to change the thermal pads. Is it worth the hassle/risk opening it up?

@fasttechvideo

Жыл бұрын

What would make more of a difference than thermal pad replacement is a IHS removal and replacing the paste on the processors. We did a video on this recently. While you’re in there you should also replace the pads as they usually have a life of about 5-10 years depending on the use.

@thefifthdoctor6780

Жыл бұрын

@@fasttechvideo thanks for getting back to me. I think I’m going to send it off for deliding as I’m scared of damaging.

@fasttechvideo

Жыл бұрын

@@thefifthdoctor6780 We do offer this service if you are interested. Please email us at service@fasttech.ca

I got a ps3 cecha12 and at times i get green lights and dots on my screen (known as the matrix screen problem) and it causes the screen to freeze. Would deliding the console solve this issue?

@davidosullivan9817

Жыл бұрын

You touched the gpu points to hard, you need to reball now unfortunately

@fasttechvideo

9 ай бұрын

You need a new GPU (RSX) chip

Great video! Unfortunately, mine is still flashing red after all of the cleaning with new thermal paste. Can't get the disc out either. Anything else I can do?

@fasttechvideo

Жыл бұрын

We are going to release a video fixing the red light issue. Already recorded. Waiting for the editor.

@michael9613

Жыл бұрын

Replace the NEC tokin capacitor with tantalum capacitor

@fasttechvideo

Жыл бұрын

@@michael9613 The NEC Tokin capacitors are usually never the issue. What happens is while replacing the capacitors the GPU and CPU gets heated up which is what fixes the problem, mostly temporarily.

@Mr.Breast

Жыл бұрын

could be a damaged RSX/GPU, the original 90nm RSX doesn't have infill on the chip causing the connection to break over time, recently it was discovered that the 65nm RSX from later fats and the 40nm RSX from slims will work as a reliable replacement for systems with the 90nm RSX because these chips have infill. very few repair shops will do this as it is a very difficult job. lookup the Frankenstein mod if you are interested.

@motodankz4838

Жыл бұрын

@@fasttechvideo Actually, most of the cases it is the NEC Tokin. Replaced multiple consoles that had red light and fixed the issue. Although I always delid the processors so heat issues are always solved. The NEC tokins go bad very easily, and when I replace them I usually find burned ones during the process of removal.

Excellent!

@fasttechvideo

2 ай бұрын

Thanks

I wanna know how thick the layer should be I recently did the thermal paste and im now wondering if i did enough. It does seem quieter and less hot tho. I made sure you couldn’t see the top of the cpu

@fasttechvideo

3 ай бұрын

Enough to cover the IHS surface

Thank you so much i am a 15 yo and i repaired my ps3 by watching this video

@fasttechvideo

2 ай бұрын

Very good. Thanks for your comment

Tried to replace thermal paste. Did that but now power doesn't turn on. Maybe the connections is not in properly, would that be the case?

@fasttechvideo

Жыл бұрын

Check the ribbon cable at the front for the power and eject sensor. Also make sure the power supply cable is installed.

I can’t lift up the heatsink and fan there’s something else keeping it in place but can’t figure out what

@fasttechvideo

2 ай бұрын

Its dry paste thats holding it on

I did almost the exact steps like you. Had Totally dried out thermal paste on my CECHH04 and changed it with Arctic MX-4. It ylods now and i dont know why lol haha. Maybe too much thermal? Too little? How can i know even tho i tried to spread the thermal all over the IHS’s

@fasttechvideo

8 ай бұрын

No, too much thermal paste cannot cause YLOD

@lunarhail3559

3 күн бұрын

I think it's the brush method. I also had a working ps3 before I used this guide

Hey ive had my 80gb E01 modle for a while now i wa wondering what were the sizes of the thermal pads I heard that they were uaslly 1.5mm but im not sure can someone help me pls.

@fasttechvideo

2 ай бұрын

Not sure about the measurements at the moment but I will be doing a video on this in the future.

that PS3 is mint!

@fasttechvideo

Ай бұрын

Thank you 😊

Hey man! I picked up a 20$ backward compatible ps3 - its A01 - Its having issues. When I plugged it the light went Green - Yellow - Flash red. I replaced the thermal paste and put it together Green - Yellow - Green - Flashing red now. I have seen that there is a cpu UNDER those ones that can be pasted - I've also seen people remove those capacitors (couldnt find any easy online cheap) - I've also seen people heat the board with a hair dryer after pasting what i did! and it worked!.... Not sure what to do / try but would love input from someone with your experience. I don't have "syscon" but i do have common sense and a soldering iron. Thanks!

@fasttechvideo

Жыл бұрын

Watch our ylod video posted recently. If that fails replace the nec/tokin caps

What is the normal temperature for fat model? My ps3 fat have 80° in game and cooler is set to syscon, end set to auto at 68° is ok but fun make noise.

@fasttechvideo

Жыл бұрын

80c is high you should be around 60 Use this delid guide to lower your temps : kzread.info/dash/bejne/ea6Bz8twdpmbp7Q.html

@laurentiuilina4992

Жыл бұрын

@@fasttechvideo i try to remove ihs at my old ps3 fat but i scratched cpu, now i have another ps3 slim model and cpu is 53° and gpu 58° with syscon but i have another problem sometimes is shutting down it self randomly with no red light buton power, it happened when i try to open aplication multiman or file manager just turn of without any warnings,although before this happened I was playing on it all day.

@fasttechvideo

Жыл бұрын

@@laurentiuilina4992 Replace the power supply, if that fails check the power rails on the motherboard.

@laurentiuilina4992

Жыл бұрын

@@fasttechvideo to change the source is not worth it, it will cost me as much as I would buy another console second hand ,and maybe it's not from the source, maybe the motherboard, I think it's also from the software from HEN and why doesn't it stop when I play 3-4 hours, it only stops when I open applications.

i broked the little close thing on the CD thing nice.

@fasttechvideo

3 ай бұрын

You must be referring to the clip on the disc drive cable slot on the mainboard

@mArqSV

3 ай бұрын

@@fasttechvideo yes that clip, i spent 1 hour on it and watching this video just for it to broke at the end, i was so sad lol

@fasttechvideo

3 ай бұрын

@@mArqSV you can put it back in by putting the cable in first then sticking the clip in. Ill be doing a video on this soon.

@mArqSV

3 ай бұрын

@@fasttechvideo thank you so much! I will be active

Would liquid metal do just as good as thermal paste or better?

@fasttechvideo

8 ай бұрын

It will be better than paste but can only be used on top of the chip not the IHS. Watch our IHS delid video we explained this

do u know if the top cover of the ceche01 and a01 is interchangable?

@fasttechvideo

8 ай бұрын

Yes it is interchangeable

@endlessgaminghorizons8467

8 ай бұрын

@@fasttechvideo you sure? cuz when i mean top cover i meant the entire top, disk tray, card readers, disc slot, etc. reason im asking is in case i wanna swap the entire top with a casing that looks nice

@fasttechvideo

8 ай бұрын

The entire case along with the top can be swapped between A, E and C models.@@endlessgaminghorizons8467

I recently tried turning on my PS3 (I believe it's the 80GB model, CECHE01), and it turns on with a green light and functional disc drive, but doesn't produce a video signal. I think it gets a little blip of some random visual pixels/static every few seconds. I am suspecting I need to replace the thermal paste. It hasn't been used in a few years but I do remember back in 2018 or so it did sound like a jet engine. Hopefully it's not dead completely. This is the first time I've had an issue. Is that also what you'd suggest?

@fasttechvideo

Жыл бұрын

Your gpu (rsx) is most likely on its way out.

@redKheld

Жыл бұрын

@@fasttechvideo Damn. That sounds hard to fix.

@fasttechvideo

Жыл бұрын

@@redKheld it is

@HardWhereHero

Жыл бұрын

Sounds like your RSX is fried my friend. I had a fat model do the same. The fan went into jet mode for about a week, started displaying green lines on the screen and then started doing exactly what you described. Only way to repair it is with a QUALITY heatgun and a pre-balled RSX from ebay. don't even bother with the ones you have to ball yourself, its nearly impossible unless you own a repair lab and every tool imaginable. This is not for the faint of heart though. I am in the IT field and work with PC hardware on a daily basis and I failed RSX replacement twice before finally getting it on the third time. Also, check your HDMI port and make sure you don't have any bent connectors. Check the HDMI cable you used with it or try another or see if you can get your hands on a pair of the Sony cables to check the component output. Lastly, you can search up how to put it into restore mode by holding the power button down and see if it will allow you to factory reset it. if you attempt a restore, make sure you have a WIRED controller that is a LEGIT sony brand controller. Most of the aftermarkets wont work for PS2 gameplay or in restore mode. I will attempt more in the future as long as it is not a BC model. I don't wanna be the guy responsible for goofing up another backwards compatible console. I have a bricked motherboard from a launch model and sometimes late at night when the kids are asleep, I will pull it out and look it over a bit while I cry inside like a big manchild.

@victorreznitsjenko7777

Жыл бұрын

Just hold the power button till the second beep it should do it

I’m going to be attempting this soon on my ps3.. it was given to me by a friend and he basically told me if I could find the problem I could have it lol. He said that he had tried to update the console and the fan started ramping up excessively and it YLOD on him. He changed the thermal paste, cut a hole on the bottom and tried again, it happened a second time and he quit. Any ideas? Thanks!

@fasttechvideo

Жыл бұрын

Must be your lucky day. My video on YLOD repair is coming out in a few days. :) Only replacing the thermal paste will not fix YLOD but the steps I will show you soon will in 90% of cases.

@TheInfamousIceman

Жыл бұрын

@@fasttechvideo awesome! I’ll sub to you and hopefully it fixed my problem! :) what are the chances it’ll STAY fixed though? 😂

my ps3 60gb has red light of death, how did you put new thermal replacement.

@fasttechvideo

5 ай бұрын

As shown in the video, sorry the beginning was lost because go pros are pieces of crap

@td64youtubechannel80

5 ай бұрын

Ok, did you clean a cpu and put new thermal paste on it.

@fasttechvideo

5 ай бұрын

@@td64youtubechannel80 yes as demonstrated in the video

Sorry for asking. But how do you fix the power button on the cecha01 ps3 console?

@fasttechvideo

Жыл бұрын

Depends on whats broken. I would recommend buying the replacement board with sensors from our site (links in the description box). They are not expensive.

@scratches12mevideos

Жыл бұрын

@@fasttechvideo I fixed it an day after my comment few weeks again. All it was, was the connector to the power was bent so I bent it right back in place what it was originally set. It works again

@fasttechvideo

Жыл бұрын

@@scratches12mevideos great! Please consider liking the video and subscribing if this video helped you out.

I have the first model who supports ps2 games, but when I put a ps2 disc in, it shows up in the meny, but when I start the game, the screen just turn red-black forever.

@fasttechvideo

6 ай бұрын

Replace the laser. If that doesnt work you probably have a hardware issue on the board. Is it a A or E system?

@dngdnf4862

6 ай бұрын

it reads the ps3 games totally fine@@fasttechvideo I have the pal 60GB model (CECHC), Partially software-based PS2 emulation, just like Ntsc 80 gb[50]. not like the first 2006 20 and 60 gb ps3 that had Hardware-based PS2 Backward Compatibility

My 60gb it will play ps2 games but not ps3 games need the help on that and I also have a 20 gb ps3 I can’t figure out how to use the Ethernet cord to get internet access???? I just want to add my psn account to it I have a 500ssd on to 😅

@fasttechvideo

Жыл бұрын

Replace the blu ray drive. Check our site (links in the description box)

I think after 15 years of not touching my ps3, my thermal pads, and paste are gone. The system runs at 67C while idling, but i have yet to receive any warnings about excessive heating or needing to turn it off.

@fasttechvideo

9 ай бұрын

Time for a thermal paste replacement and maybe even a delid

is delidding necessary? can i get away with just cleaning and reapplying new thermal paste every 2-3 years? dont want to risk with delidding

@MarianMMN

Жыл бұрын

NO! DO NOT DO THA! I JUST DELIDDED IT AND I WISH I COULD EAT THAT THERMAL PASTE! I scratched the cpu.. and now it's not starting up....

@CalveZilla9

Жыл бұрын

@@MarianMMN yall are scaring me now 😅😭I guess I will top it off with thermal paste and hope its enough as its my first time applying and will only delid when im forced to. THANK U SIR

@fasttechvideo

9 ай бұрын

Depends on how hot the system is running after doing a thermal paste replacement.

im thinking about sending 3 of my ps3s of mine ! they dont have a video output !

@fasttechvideo

23 күн бұрын

Please email service@fasttechstore.com and we will provide you with the details you need to send it in.

i has ps3 80gt model what uptade some point 750gt model hd. i buy year 2010

@fasttechvideo

4 ай бұрын

👍🏽

I appreciate the thoroughness of this video, but Jesus man, if I could listen to this without someone proclaiming how great they are and then blaming everyone and everything else around them for why things suck - it would be 10 times better.

@fasttechvideo

8 ай бұрын

Hi, Could you give specific examples? I would appreciate it. Thanks for being a viewer and for your constructive criticism.

Well this help the ylod problem?

@fasttechvideo

7 ай бұрын

No If you have YLOD you have a serious hardware problem. Watch your ylod video but make sure to run syscon first to check why you are getting this error

@JudeIS

7 ай бұрын

@@fasttechvideo ok thanks

I sent you an email I want to send my PS3 to you so it’s good to run for the next couple of years.. currently getting the blinking red light after minutes of use

@fasttechvideo

4 ай бұрын

Okay thanks for your inquiry some one will get back to you shortly

One thing I am picking up, is do not fuck with the rsx or EE. Clean out the system. Just do not fuck with them. Too many cases of people popping off the plates and it breaks their console. Just go in and clean, do not disturb the original bins with the paste … my two cents.

@fasttechvideo

13 күн бұрын

@@TalonNismo sometimes you have to remove the IHS if the system is overheating even after a thermal paste replacement but you are correct it should be left alone if not required.

You need to remove the IHS plates to get access to the chip set .. this is the most important thing . . One thing is that they are a pain to remove ..

@fasttechvideo

Жыл бұрын

and they are dangerous to remove. We will be covering this in a later video.

@vinzetti21

Жыл бұрын

@@fasttechvideo when will that video be updated?

@fasttechvideo

Жыл бұрын

@@vinzetti21 1-2 months

@fasttechvideo

Жыл бұрын

@@vinzetti21 the IHS delid video is out now kzread.info/dash/bejne/ea6Bz8twdpmbp7Q.html

Put a 1tb Sata SSD into it! I did it on my console and it did wonders. It improved the load and download spreads a lot!!!! Improved my PS3 so much highly recommended!!

@Henkibojj

Жыл бұрын

Most of the improvements are psychological though, since the infrastructure wasn't built with SSDs in mind and will therefore load almost as slowly as before, especially if the game depends on disc loading a lot. What could be improved is the XMB files loading faster and not show the spinning file symbol as long as before.

@DatGuyWithDaGlasses

Жыл бұрын

Idk what that other guy here is smoking but loading times and overall game performance is significantly improved with an SSD upgrade. Stuff like texture pop in and frame drops is also significantly decreased. Overall an incredible upgrade

@miqotelover

Жыл бұрын

Which drive did you get? Thinking of doing this for my ps3 too.

@fasttechvideo

6 ай бұрын

If anyone needs an SSD they can get it here: www.fasttech.ca/playstation-3-parts/ps3-1tb-ssd-solid-state-drive-tn3kn

Is it worth buying one of those or no thats questionable?

@fasttechvideo

6 ай бұрын

Buying what?

If you want even better cooling performance, he should’ve taken off the cpu and gpu heat shield and changed the thermal paste under the metal plates too.

@fasttechvideo

Ай бұрын

Yes I did this in a later video. Check out my DE-Lid video

No thermal pad replacement?😬

@fasttechvideo

2 ай бұрын

Nope will do that in a later video. Thanks for your comment.

My cover does not slide off

@fasttechvideo

Жыл бұрын

Probably because its stuck due to liquid or dirt.

@adamneverlack

Жыл бұрын

@@fasttechvideo Thanks my man, managed to get it off, there was a bunch of dirt right in there but once I saw how you slid it out and then pulled it I managed to get it! Cheers and thanks for the useful content

@fasttechvideo

Жыл бұрын

@@adamneverlack thank you for the comment sir. Please like the video and subscribe for more ps3 and ps5 videos.

Why two XS ????

@fasttechvideo

11 ай бұрын

I didn't understand your question

My little bro has that Xbox 360 halo edition but it has red ring of death

@fasttechvideo

8 ай бұрын

We are going to be doing a video on this soon

Welp, not sure what I did wrong but I got everything back together and now I’m getting nothing. No power. No red light.

@fasttechvideo

2 ай бұрын

Check the power supply connections and the ribbon cable connector for the power and eject sensor

@Nick.Pellerin

2 ай бұрын

@@fasttechvideo ok I double checked, and Everything is plugged in as it should be. For a back story, I got the YLOD and attempted to heat up the motherboard to try and “re flow” the solder. So I’m thinking I damaged the motherboard in some way. Not sure how, but I double checked the connections like you said and still no luck

@fasttechvideo

2 ай бұрын

@@Nick.Pellerin Can't diagnose from here. All I can say is check the power supply and the on/off sensor board at the front. Have you tried turning it on with a controller?

@Nick.Pellerin

2 ай бұрын

@@fasttechvideo I was unaware you could turn these consoles on by the controller

@fasttechvideo

2 ай бұрын

@@Nick.Pellerin yes you can but the controller has to be paired to the console already. Good luck

If you put some thermal pad on some of the chips the heat will drop a lot too.

@fasttechvideo

Жыл бұрын

Yes that is correct. Thanks for your comment and please subscribe :)

@darthsay1065

Жыл бұрын

which chips ?

@pocketreviewgaming

Жыл бұрын

@@darthsay1065cpu

@pocketreviewgaming

Жыл бұрын

@@darthsay1065put one on the back side of cpu were caps are will run better :)

You do know that the PS/3 is the only Play station that cleans itself, Right?

@fasttechvideo

7 ай бұрын

You are referring to holding the eject button down to blow out air?

@johntsirakidis9544

7 ай бұрын

About a month ago was the last time my hard drive on my ps/3 worked. I don't know if this is from dust, power outages, everything else works fine. PS/3 did an upgrade on my console. So was it a bad update, I also noticed everything was wiped on my console, My Progress games, internet info, gone. I reset everything online, everything works fine, and recovered my online games. CD Rom reader,player or media will not work. I have never opened my gaming consoles up. ITTAKES THE DISC IT SPINS IT, BUT NO GAME PLAY sorry for caps. On screen you see no disc, and no eject through the cordless controllers. If you physically press eject the disc ejects. My hard drive is 64gig/74gig. Originally 80 Gig. My wife bought that console for me used from GameSpot with God of War Gold Edition, GTA-lV, and grand tourismo, for under 100 clams. It came with 2 controllers/ cords and a power plug. No books, no registration forms online or off. I keep me electronics in Prestige condition. I even have a PS/2- still works. And Nintendo 64 with all retro games- - in working order. I don't know if mine plays ps2 or ps1, never tried it.

@johntsirakidis9544

7 ай бұрын

@@fasttechvideo Yes Sir.

@johntsirakidis9544

7 ай бұрын

I have the CECHL01 is this part of the same group of ps/3's that you meticilously describe in detail? And Thanx for posting your hyperlinks, which i have used some already. checked out pricing on sending my machine to your establishment , I think I would rather fix on my own, So Thanx again for the Proffessional Video and all the contents you shared, You know your Business.

Arctic Silver 5 doesn't expire. It has silver in it that keeps it conductive even after many years of use. Your wasting your time and money replacing it.

@fasttechvideo

6 ай бұрын

The system did get much quieter after

@computernerd92

6 ай бұрын

Your employee must have applied too much, or applied it wrong. @@fasttechvideo

You can tell bro don't fucking play games when he busts out a bucket of thermal grizzly. Fix a few ps3's here and there. I bet you do.

@fasttechvideo

Жыл бұрын

Hahahah thats right :)

Just saying: All PlayStation 3's can run PS1 Discs, including slim and super slim

@fasttechvideo

6 ай бұрын

Correct

All PS3S can AT LEAST play ps1 games. By the time the PS3 came out, the PS1 was at least a decade old.

@fasttechvideo

10 ай бұрын

Yes that is correct. Thanks for your comment Ali.

Nice bot comments here lol

@fasttechvideo

8 ай бұрын

Can you explain?

Wow you talk alot

@fasttechvideo

7 ай бұрын

You can always watch a different video 😊 I speak a lot because I dont want to leave out any details, this is why I believe I have an audience but regardless thanks for your comment.

@aarondevola5433

7 ай бұрын

I did watch a different video. You were talking about yourself and trying to sell us stuff most of the video. If youre such a professional why cant you handle criticism? Lmao

@aarondevola5433

7 ай бұрын

You didnt even delid the cpu chip this a half assed job

@fasttechvideo

7 ай бұрын

@@aarondevola5433 covered de-lidding in a later video. Thanks for your comment

@dark_horizon706

6 ай бұрын

@@aarondevola5433oh l’d LOVE to see you try and delid a system without destroying it. There’s no point deliding it if it’s in working order. It’s a high risk to do.

this video was better once i muted it. you talk too much about irrelevant things, also the product plugs are annoying...dont plug a screw driver you cant even use without it being plugged in. smh.

@fasttechvideo

9 ай бұрын

Ill run my channel how I want to but regardless thanks for your comment.

The worst thermal paste change tutorial I have ever seen, expensive tools and supplies so that the IHS were not removed and the thermal pads remained the same, a shame and a waste, poor console.

@fasttechvideo

10 ай бұрын

The thermal pads almost never have to be replaced. Only if they break apart or are brittle. I also have done IHS removal in a later video. Thanks for your comment.

I broke the bd drive cable latch 🥲🥲🥲 It wouldn’t go in at all tried it both ways

@fasttechvideo

2 ай бұрын

Can be fixed by putting the clip back in after you insert the cable

@CaimAstraea

2 ай бұрын

@@fasttechvideo Thank you! I will try again tomorrow ... already spent a few hours trying to get it back in oh chipped a few microns off it also I might need a new cable also dunno why it's so hard to insert. The blue tape that was on the cable also fell off now it just bends weird . Guess it was very old. I'll try to bring it to a repair shop or buy a new one at this point .. kinda sad since it was the BC version also ..

Thanks!

@fasttechvideo

Жыл бұрын

Youre welcome. Please like the video and subscribe