The best part of all of your videos are the content around what might go wrong and how to fix it. So helpful!

I can't believe this video only had 5 comments. It was such a cute ring. *Thanks for the instructions.*

It looked complicated, but it's fun.Very beautiful bracelet 😍

Thank you I am absolutely in love with this ring and cant wait to make it! I'll try to send you guys a Photo of the finished product. Thanks a million for making this available here, CJE

Try leaving one link open at each end, then interlace the links, then feed the end wires through, the two rows of links to close the loop. This would give the illusion of a seamless weave

Thanks so much. Very easy to follow. I can't wait to try.

That was a fantastic video, so easy to follow, can't wait to try it. Thank you.

What an awesome video! Thank you so much! Can't wait to try this chain ring. :)

I just want to thank you for this tutorial, I've been looking for ring tutorials and this one was THE one for me. You explain it so well, since I'm a beginner it helped. I've subscribed and hope you keep the videos coming ;) Thanks again.

HI CRISS, THANK YOU FOR SHARING THE VIDEO. ILOVED. VERY PRETTY.

I enjoyed this tutorial. Thanks for sharing.

que hermosura de 💍, prometo que ya mismo lo hago, gracias la enseñanza, saludos desde cali Colombia

Excellent instruction! Thank you

Me encantó, muchas gracias por compartir!

Really NICE! Thank-you!

Thank you!

awesome can't wait to make this and maybe a bracelet :)

Exelente maestea desde Ecuador

super cool!you are blessed :)

very nice thank you

muy bueno y didactico...

genial me ha encantado. beautiful

I loved I thank you!

A useful video

graciassssss

Norma Muñoz gracias por la enseñanza me gustaría que se pudiera traducir al castellano sería lo ideal ya que sus vídeos son hermosos

Thanks,best

Is there any way to wire wrap the bead from side to side instead of top to bottom?

This is fascinating!! It's beautiful!. However.... why not solder the two ends together?? I'm a manly man and don't like the stone. I would prefer a plain, smooth weave. Why can't the ends be soldered together??? Please advise. Thanks for sharing. Ax PS: Did you mention that this was or is available as a kit??

@beaducation

Жыл бұрын

Sorry for the late reply, your comment kinda slipped through the cracks! You absolutely could solder it. This video is just showing how to do it without the need for a whole soldering setup.

I'm having trouble sourcing the cable chain of that size. Can I ask either where you got it or what mm size it is. Thanks

@beaducation

10 жыл бұрын

Hi! You can find the chain on our website here: www.beaducation.com/shop/sterling-silver-drawn-cable-chain-35mm-x-25mm-by-the-inch-p-3801.html

Hi Kriss, great video!!! Thank you for taking the time to make it and share!!! I would like to know how to finish the ring if I don't want to place a bead on it.Is there a way to make that finish even? Thanks once again.

@beaducation

9 жыл бұрын

Adelia boop your only option would be to zip the ring together with wire as clean as possible, and maybe wear that "seam" in the inside.

@adeliaboop5126

9 жыл бұрын

Beaducation I will try as you suggest. Thanks again for taking the time to answer. Best regards from Argentina!!!! :-))

@christinagroves4088

8 жыл бұрын

+Adelia boop Leave the first and last link out until you finish, then string them on the same wire alternating each end. So you put your wire through one from the top, then one from bottom and so on, it will create a seamless join. Be careful to keep the links aligned properly as you go. Hope that helps you out. :)

@adeliaboop5126

8 жыл бұрын

Christina Groves thank you!!! :)))

Hi, Really want to make a few of these rings but don't want to do Sterling Silver. Any recommendations for a Stainless Steel version.

@beaducation

9 жыл бұрын

jellybear89 the key to this ring is the correct size chain, so if you could find this chain in Stainless, then yeah, go for it!

Is there a way to adapt this into a necklace instead of a bracelet? If so how much more wire would you think it would take to make an 18 inch length of woven chain at 8 chain length wide. How would you adapt a clasp.

@beaducation

6 жыл бұрын

I would figure out how much it took per inch and then multiply that out to how long you want the necklace. From there you would have to wrap on a a clasp, maybe a bar sliding clasp.

Hello! Thank you 😍😍 can I make this ring with a round links chain?

@beaducation

17 күн бұрын

It doesn't lay as well

Would love to try this, but finding the chain required seems to be impossible!

@beaducation

6 жыл бұрын

We carry it! There is a link right there in the description. The link takes you to the class on our site. Here ya go :) - beaducation.com/online_classes/18-woven-rings

I want my ring to look silver like the one on the right of the end of your video how do I do that

@beaducation

7 жыл бұрын

Hi April! If you would like your ring to be shiny with no patina, skip the patina step. Have fun!

Eso esta maravilloso I hope you understand me

@beaducation

9 жыл бұрын

Nivia Figueroa-Diaz ¡Por supuesto!

what do you do if the wire brakes. my wire broke about halfway through

@beaducation

7 жыл бұрын

Hi Jeramie, You can undo some of the weave until you have a good tail, then twist the new wire onto it. Trim with a flush cutter, leaving a few twists, then hide the twist in the chain. But, to be honest it may just be easier to start over :) Have fun!

i'm not understanding the preoxidized to oxidized part please help I want my ring to look like the oxidized one

@beaducation

7 жыл бұрын

Hi April! Kris using Liver of Sulfur to oxidize the chain before she starts her project. Once she's done she then buffs off the patina they is on the surface of the design. This way the top surface of the design is bright and shiny, and the recessed areas are dark. It gives great contrast! Have a great day!

Where i get this chain . ?

@beaducation

8 жыл бұрын

Hello! You can find it on our website: www.beaducation.com/zen_products/3905-sterling-silver-drawn-cable-chain-3-5mm-x-2-5mm-by-the-inch Sorry for our late response, your message was in our spam folder. Have a great day!

Where did you get that red ruler? Please

@beaducation

Жыл бұрын

We used to carry them but haven't had them in years. Sorry, I don't know where to get them now.

@MaryCochrane

Жыл бұрын

@@beaducation Thank you. ❤️

👍👍👍👍😂❤️❤️❤️❤️

cmo no lo explica en español