Wire Ferrule and Crimper Basics - put a perfect end on stranded wire
Тәжірибелік нұсқаулар және стиль
The basics of ferrules and ferrule crimpers -- tidy up the ends of stranded wire and eliminate stray strands causing shorts!
These crimpers can also work for other type of full-surround wire terminals, though ferrules are the most common use.
Become a patron: / justtoolbasics
Affiliate product links:
Kit shown (ferrules and crimper): amzn.to/3pedZmV
Пікірлер: 3
Those square crimpers look nice. I usually just squeeze with pliers but need to look into getting those square ones now. Tinning wire ends with solder is generally frowned upon if the wire will be going into any pressure fitting as solder is soft and will allow the connection to work itself loose over time - tinning is only good for prepping the wire to be soldered to something else.
@JustToolBasics
3 жыл бұрын
In an application with vibration (like in a car or whatever), for sure -- tinned ends are definitely not appropriate. But tinning is reasonably common for speaker cables and other similar things, though, I've found. But, I agree, still not preferred/recommended.
@davidestes7266
2 жыл бұрын
IPC 620 certification says you should never tin or twist a wire that you will be crimping, as it will change the current that is flowing and could ruin the crimp of the wire to the terminal. I love how you show the tool and how they should be used, but is it possible to link, display, or cite the documentation to back up your awesome demonstrations? Other than that you are doing a great job! Keep up the wonderful work.