Lovely job as always. 100k sub incoming. 💪💪💪

Love the latticrete system. Been using for over 5 years now. Best system overall in my opinion. Hard to beat a system that has you covered for everything from the wall board to the grout.

@LandbergTileTV

2 жыл бұрын

Plus preblended floor mud for our mortar beds, self leveling underlayment etc. Good system for sure.

@D2ka4

2 жыл бұрын

@@LandbergTileTV very true. Don’t do many mud beds in my area but when you do it’s a great system !!!

@laticrete

2 жыл бұрын

We appreciate you using our products!

Nice video, would have loved to see the curb install and waterproofing.

Very good video.

Tile Life💪🏼💯

We do makes a nice plastic corner trowel that is super useful

in a video you used a laser level with a wall mount that used pins to stick to the wall. looks like a dewalt level. where did you get that mount?

What is your curb made out of? Thanks

What is the curb made of? Hydroboard+2x4?

good job

@LandbergTileTV

2 жыл бұрын

Thanks! 👊

How close are you putting in screws on wall if installing large format 12x24 tile?

What did you put on the studs Which fasteners how long: type No tape on the joints Steel trowel ? Done.😢

Landberg, time for you to get on board with the flofx drains!! ;)

@LandbergTileTV

2 жыл бұрын

I have a drain body and a few grates already, I'll try them soon!

@davidherd3739

2 жыл бұрын

They’re the best!

I like it. SCHLUTER should add the caulk around the drain like you do, not just thin set to hold the water between the membrane and the drain

@LandbergTileTV

Жыл бұрын

I agree 👊

Great video. Landberg classic I would say. Out of your experience which band (schluter vs latecrete vs …) is the thinest one (most pliable) in regard to the corners and bands overlapping, hence creating small build up? Thanks in advance. 👊

@LandbergTileTV

2 жыл бұрын

Both membranes seem to be the same thickness and it seems like you will have a small amount of buildup regardless.

@laxathon

2 жыл бұрын

Sealant is the way to go

@laxathon

2 жыл бұрын

I’d suggest wedi over anything 100% waterproof through the whole thing

@KeePReeLing

Жыл бұрын

Kerdi banding and kerdi it def thinner. I like latty membranes better tho. they stay down flatter. Kerdi win on holding tight creases on corners since its thinner.

Your going to want to invest in the Milwaukee battery operated sausage gun.

It looks like you got thinset on the studs to get the foam board level/plumb, is this an approved step by Laticrete? I know Schluter allows that method for their foam board but I've been wondering specifically about this for the hydro ban board. I'm about dead set on using hydro ban and being able to float the walls with thinset would be by far the easiest solution for my out of plumb walls.

@LandbergTileTV

9 ай бұрын

Yes, this is definitely approved by Laticrete. I ran this by my rep

@jtoker9758

9 ай бұрын

@@LandbergTileTV Thanks.

How long do you let the dry pack set before using thinset over it?

@LandbergTileTV

2 жыл бұрын

24 hrs or more

Could you do a video using go board? Local box store is starting to stock it, I haven't seen many professional use it. What's your thoughts on it?

@matthewsaltzman5573

2 жыл бұрын

I'm a tile shower professional, just used goboard for the first time recently, fantastic product. Super lightweight, easy to cut. It's the same exact procedure as you just watched. There is an approved sealant list on their website. I used white quad max.

@mattjudy6780

2 жыл бұрын

He's used it before

@fartpooboxohyeah8611

2 жыл бұрын

I've used it for a long time, great product, all the tile backer foam boards are essentially the same. You install it the exact same way he's installing the board above. Thing is, Home Depot used to carry GoBoard around here, but they haven't had any of the 1/2" in stock for many months.

Why doesn’t the seam band go all the way into the corners? Wouldn’t that be a weak area where it butts?

@tommywalker5348

2 жыл бұрын

because he already has the corners in 1st then the rest around only has to over lap 2inch....he's doing it correct👍

Did I see that correctly, did you use sealant to wet shim?

@nailbndr9869

Жыл бұрын

Not sure about this video but in others he uses thinset

Are you not using Schluter anymore?

@LandbergTileTV

2 жыл бұрын

We really like Laticrete, so no.

Still personally prefer using a liner at the base.

Is that a fat max tape measurer?

@LandbergTileTV

Ай бұрын

Yes, 16' the best!

Asking if this will ever leak? I doubt it will leak, but only time will tell. I tend to use black paper, then backerboard and then paint it with redguard and tape all seams with mesh tape. 12 years later, still no cracking, separation or leaks. I will stick to what i know works 😅😅 Or go back to the good ol days of scratch and float! GG!

@tommywalker5348

2 жыл бұрын

I use goboard ALL the time! I carry about 6 peices at a time compares to 1 HEAVY peice of durock🤦‍♂️ not no more!!! been at 23yrs and this new and improved sealed systems is the way to go in MY opinion👍 but if u like that heavy nasty crumbly stuff🤷‍♂️ I mad at ya🤟

@leonardsmith82

2 жыл бұрын

@@tommywalker5348 I stay away from the heavy and nasty crumbling stuff 😅😅 I don't wish that material on anyone. I'll also take your advice on this product! I would just have to shadow a few people first to get the process down correctly.. Thanks for the response good sir 😎👍

@tommywalker5348

2 жыл бұрын

@@leonardsmith82 🤟I use to use the paintable membrane but honestly it's time consuming to wait between atleast 2 or 3 good coats. But seriously this foam board really is a nice lightweight material and to cut it with a razor knife is 🧈...100% waterproof!! hardi board is water resistant still will absorb water if not painted the correct mill thickness.....not saying I wouldn't do it that way again but I believe I'm sold on FOAM!!😁

👌🏾👊👌🏾

@LandbergTileTV

Жыл бұрын

👊👊👊

Great vid. The sealant vs sheet membrane debate. I dont think that sealant will outlast a whole wall covered with thinset and monolithic sheet membrane. Old songs please.

@mattjudy6780

2 жыл бұрын

This. Idc what sealant you have, it will degrade over time.

@MrTooTechnical

2 жыл бұрын

Next time just say u agree with me. It’s easier and more accurate to write.

@fartpooboxohyeah8611

2 жыл бұрын

@@MrTooTechnical What you think doesn't matter. What does is industry practice and results.

@MrTooTechnical

2 жыл бұрын

Pay attention, the sealant will never outlast monolithic sheet membranes! It can’t. It’s simple physics. However, the vid is still great and the shower is somewhat waterproof. Boom

Where’s the best place to buy these shower kits in town?

@fartpooboxohyeah8611

2 жыл бұрын

The Big Box store sells them.

@laticrete

2 жыл бұрын

You can use our where to buy locator (www.laticrete.com/wheretobuy) to find a LATICRETE distributor or send us a message at socialmedia@laticrete.com and we can help.

@laticrete

2 жыл бұрын

@@fartpooboxohyeah8611 our LATICRETE products are not sold in Lowes/Home Depot but can be found in Floor & Decor.

I've never even heard of a tile guy doing a flood test, finding a leak and then repairing it or ripping the whole pan out and rebuilding it. I don't even think it would be possible to find a tiny leak in order to repair it.

@amattson6578

2 жыл бұрын

in some areas flood tests are code.

Wrong screws

Made in USA 🇺🇸 One month later made in China 🇨🇳 🤣🤣