막대기를 너무 오랜만에 잡아보는거라서 그런지 어색하네요. 부디 양해부탁드립니다. 형님들... ;) It's awkward because it's been a while since I've held a stick. Please understand brothers... ;)

@flatwater5

2 жыл бұрын

As always, very nice welding, Sir. Love your channel!

@atopep3772

2 жыл бұрын

Thanks for the video . It's very good vídeo congratuletions . Hi from valencia 🤪😝

@atopep3772

2 жыл бұрын

And tkankyou for you education

@user-hk8db6tb1g

2 жыл бұрын

무슨 차이인지 설명 좀 부탁드립니다

@WELDEROFMASTER

2 жыл бұрын

Thanks you infomation brother 👍

It reminds me of when I was learning to weld and my son,(who is a welder) would be over my shoulder saying do this or that and each time I would learn another trick to weld a bit better. Great video!

Excelente proyecto muy bien desarrollado y mejor ejecutado , unos cordónes de soldadura magníficos , con diferentes técnicas , a cada cual mejor , gracias por compartir tanta información y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜

Your videos are short, well made and they get to the point 👍🏼

this vid is super clear on how to practice the move. thanks!

OK as a novice starting off very late in life that is the best most informative video that I’ve been looking for dealing with weaving, Just subscribed, that’s what I’m talking about somebody who actually knows how to show techniques in an intricate way

@de0509

2 жыл бұрын

I started late too. What works for me personally is to focus only on two things when weaving, make sure theres enough metal to fill every crevice and to stick to the exact same motion and speed from start to finish

@dorianobruintjes1902

2 жыл бұрын

So what is the best technique? Straight forward, in circles or in diagnal lines? Cause i was thaught to do half moon shapes, but i dont see it here. So whats best?

@hnorrstrom

2 жыл бұрын

@@dorianobruintjes1902 I always do half-moons that's what I been thought here in Sweden. Never seen anyone doing these patterns

@endurojimmy3109

Жыл бұрын

​@@hnorrstrom Me too, I am returning to welding as a retirement hobby after 35 years. I was taught in the UK and we were taught half moons. Maybe it's a European technique.

I work on dock plates and all we do is stick welding in the field. This was nice.

Magnificent! Bravo! Awesome! Beautiful! THANK YOU!!!

안녕하십니까 지금은 방학중이지만 특성화고등학교에서 전기용접과 티그용접을 배우고 있는 학생입니다 처음에는 힘들었지만 유튜버님의 영상들이 많이 도움이 되었습니다 용접 영상 올려주셔서 정말 감사합니다 앞으로도 계속 힘내세요

@myungwol

2 жыл бұрын

혹시 실례가 안된다면 나중에 티그 연강파이프도 보여주실수 있으신가요? 학교에서 연습하는데 어려워서 영상을 보고 참고하려고 합니다 부탁드립니다

Habe ich vor 40 Jahren so ähnlich gelernt, das ist wie Fahrradfahren, einmal richtig gemacht und weiter so. Für einen Laien schwierig durchzuführen, weil dann die Materialkunde fehlt.

Weaving is important because construction plans may call for certain size fillets. Job lingo might be, “ Give me one in and one over. “ Then you’d know why weaving is important. Video is for novice welder. I still watch videos. Never too old to learn. 👍

Superbe video, sans commentaire, très explicite. J'ai beaucoup appris; MERCI!

thank you for showing your technics. very helpful.

Not that I use stick welding common but it Is always good to maintain the skills. When I was having a exam for stick welding in my school time, I had beautiful welding but failed the questions 😅 I was so devastated... but got my diploma next time🤭 next some pipe welding and explain what kind of rods to use?

@2035jim

Жыл бұрын

I use stick welding more often then mig and tig welding for sure it sure comes in handy to know a good technique

These are great welds, thank you for sharing. You make look so easy.

스틱 전기용접도 잘 보았습니다. 3가지 위빙방법을 한 플레이트에 모아서 보게되니 위빙에따른 비드결 차이를 확인하기 더 쉽고 보기가 좋네요 항상 좋은영상 감사 드립니다👍👍🔥🔥

Show, artista da solda, tô aprendendo muito, obrigado amigo.

perfect video with good examples of showing 👌🏻

I have just started learning to weld at a school ,but I’ve learned more with you than any of my instructors. Thank you so much, your welding is incredible sir ! I aspire to weld as great as you one day! Blessings my friend ! 🙏🏻

@jeepwk6.5L

2 жыл бұрын

Yikes 😳

@trueaussie9230

2 жыл бұрын

Precisely WHAT did you learn from this video!? Clearly I've missed something.

@mr.nobody68

2 жыл бұрын

If you're learning more from KZread than a school, then the school is ripping you off, and the instructors are either incompetent or don't give a fuck. Drop out and find a better school

@300-33

2 жыл бұрын

приборы

@CurbJesus

2 жыл бұрын

@@trueaussie9230 this video demonstrates proper pooling of the bead.

The truth is that it is great that you start uploading videos of coated electrode, I follow your video a lot, greetings from Argentina!

Al buen entendedor pocas palabras :) gracias por el video nunca pensé en disminuir o aumentar el amperaje al estar trabajando.

Richtig gut und wenn es Anfänger sind und nicht verstehen sollen sie auch so oft wie möglich Üben , du hast es auch gezeigt mit dem Strom Einstellungen für jedes Stil und am Ende auch die Unterschiede zum pendeln gezeigt warum es so aussieht wer das nicht begreift soll garnicht zum schweissen anfangen . Wer die grünt Kenntnisse hat der versteht es Danke für deine Mühen für das Video 👍🏽👍🏽👍🏽

И вот что это видео дало зрителю? Ничего Придет молодой, или не очень, человек за знаниями в области сварки, а все что получит - это какие-то жесты руками, ноль объяснений и три шва, которые на таком расстоянии от камеры выглядят одинаково. Если делаете подобный контент, то объясняйте суть ситуации. Расскажите о перемешивании металла сварочной ванны и для чего это нужно, объясняйте какие у вас электроды, почему такие и зачем вы выставили именно такой ток. Видео ни о чем. Больше вреда для новичков, чем пользы

@stuart207

2 жыл бұрын

Thank you for explaining this. I own a welder and have never used it so thought this video would be useful.

@PeocTaT1

2 жыл бұрын

Полностью согласен.

@mrrock131019

2 жыл бұрын

Согласен. Лично я вообще ничего не понял в этом видео.

@user-it4iw2ri2n

2 жыл бұрын

Logrem На сантиметровой толщине металла,плетение показать проще простого.даже молодой справится

@user-kr5rm2rw1x

2 жыл бұрын

Он показывает, то, чему учат в начале сварочной практики, да не объясняет, это минус. Но хитрый, варит дугой назад. А напроход, зигзагом, спиралькой, это показано во всех справочниках

이 분은 티그뿐만 아니라 막대기도 잘 하시네… 혹시 가능 하시다면 알루미늄 스풀건도 올려주세요 👍👍

Your welding is pretty good fella. What I am wondering is if you would explain which method used has what specific characteristics on depth and width of penetration. Thanks

Thanks man. Nice beads.

Love watching welding.

finally a stick a welding im waiting for this thanks bro

Excellente vidéo. Merci du partage

Excellente vidéo c'est claire et limpide

덮어놓고 위빙을 해선 안되고 모재와 용접봉이 녹으면서 용접부위에 용융된 쇳물이 제대로 용입이되는지 보면서 진행하는게 용접의 핵심입니다. 용접봉이 녹으면서 쇳물이 물결치며 나가는걸 볼수있으면 용접이 되는것이고 피복제가 녹으면서 부글거리는 용융액을 쇳물로 오인하면 용접이 안되는것이죠

Yeah, Electo Welding. love it

Ich bin selbst Schweißer und hab das über zwanzig Jahre gemacht. Es gibt immer Leute die ein großes Maul haben und meinen sie können alles besser. Ich sag's dir: nicht von denen entmutigen lassen, immer weitermachen. Auslernen tust du niemals dabei, hab Spaß beim Schweißen!

thanks bro the video is very helpful

GREAT STUFF

잘배우고 갑니다...

진짜 올려주셨네 잘 보겠습니다.

This taught me (and I’m assuming everyone else that wasted 7mins of their life) absolutely nothing. Why do i need to learn weaving in electric welding? You didn’t even answer your own question

@trueaussie9230

2 жыл бұрын

ABSOLUTELY nothing!!

@mikec.8556

2 жыл бұрын

weaving deposits more weld deposits but you're gonna need shit load of rods depending on the type of groove you're gonna fill

@trueaussie9230

2 жыл бұрын

@@mikec.8556 unless you're a fan of polished fancy bead patterns, you'll just have to grind it off anyhow. No?

@mikec.8556

2 жыл бұрын

@@trueaussie9230 depends on specs call for .

@trueaussie9230

2 жыл бұрын

@@mikec.8556 understood. If the specs call for more than just securely joining 2 pieces of steel - ie an excess of welding material - then weave-welding is the way to go. I'm only an amateur welder but, as with any / all work I undertake, I like the end result to be as neat as possible. As an amateur, my understanding is that once the valley between the pieces is filled the result is as strong as if it were originally 1 piece. So I'm still at a loss to understand why / under what circumstances I might need to weave-weld. What benefits does weave-welding offer that 'clean' welding does not?? Unfortunately I find 'professional' welders to be extremely reluctant to give up their 'secrets'. I'm coming to the conclusion they're afraid the world will discover that welding is not such a ''specialised skill' after all.

Thank you.MASTER

Название: Почему нужно учиться плетению в электросварке? Видео на этот вопрос не отвечает

한여름 더운데 고생하십니다.

that was a good ass weld, for the slag to come off that much is top tier

Ini baru ttrial yg plg jls.mks

Good lesson to be learn .

Fica uma solda perfeita e muito bonita gostei muito e também gostei muito do fundo musical instrumental muito agradável. Obrigado amigo pelo vídeo Waldemar Janhre Amazônia - Brazil.

Nice video. This is how it should be with electrode welding, the slag lifts and loosens by itself.

@kf8575

2 жыл бұрын

Depends what type of rod it is, and what you're doing with it. Fillets on steelwork with iron powder rods for example, dont always peel, the slag often pops off in one piece. Or a pipe open root with a 7016 dcen, it clinhs to the weld and the preps, but comes off with a hand wire brush

@uncleputes

2 жыл бұрын

Try low hydrogen rods 🤣

@jetamorsolovideos

2 жыл бұрын

It applies only on thick materials

@de0509

2 жыл бұрын

Unless its the stainless steel rods that Ive used tho. Those things are a safety hazard. The metal cools and shrinks and slowly small bits of slag gets shot off the weld, and into your eyes

@jamesordwayultralightpilot

2 жыл бұрын

@@de0509 lmao you know there's a smart-ass response to that one. "Where are your safety glasses?"

Спасибо за труды

Muito bom mesmo ,excelente cordão de solda .Parabéns

Хотелось бы всё это увидеть на деталях толщиной 1,5-2 мм.а 10мм сварить ума много не надо....

@Tolasik

2 жыл бұрын

Вот вот.я пробовал на метала мм 10.ванну видно шов супер.на тонком метале не видно ничего

@anp6989

2 жыл бұрын

Вот именно

@user-fj4hj8hl7w

2 жыл бұрын

Я не до*уя сварщик. А что собственно тут автор пытается рассказать?

@wagon_user

2 жыл бұрын

Что-то мне подсказывает, что тонкий металл так не варят)

@wagon_user

2 жыл бұрын

@@user-fj4hj8hl7w посмотри на ток и ореол вокруг шва. На первом максимальный ток и перегрев в зоне сварки. На втором и последнем соответственно меньше при большей ширине самого шва.

The reason he showed you this is for different fill and weld, vertical, T weld, angle plate or pipe. Seen first comment of watching for 7 minutes.

На толстом металле даже чайник сварит на отлично

@user-rt9gb7oq5q

2 жыл бұрын

ПОВЕРЬ НЕТ! на личном опыте знаю)

@rustamsabitov7622

2 жыл бұрын

Тут нужно руку набить а на видео у сварнова руки треслись как с большого бадуна 😀

@user-iy2iw9oo8b

2 жыл бұрын

@@rustamsabitov7622 знаю сварного у которого руки ходуном ходят ,а варит на отлично , так что это не показатель.

@user-bp3jo2ln8o

2 жыл бұрын

Нужно начинать учиться на тонком, гнилом металле?

@user-iy2iw9oo8b

2 жыл бұрын

@@user-bp3jo2ln8o нужно научиться прогревать ,проваривать ,а это шляпа на куске толщиной 20 мм

Nice!

O filé da goiaba! Parabéns!

beautiful no words nice work

OOOh! "Slag Peel"! We love that. I was very much wondering about the type of rod! People don't like 6013 here so much, but they aren't getting the beautiful bead and clean slag release that we see here. Are these Korean welding rods? ESAB? I got some from India online that behaved very well, and gave clean results, but not like this.

Great video

일반 막용접하면 6013(CR-13)쓰고 시험볼땐E4316(저수수계)이거 쓰면 됩니다 13용접봉 사용하기 쉽다. 16용접봉 잘 달라붙는다.

Top la vidéo 📼 du travail de pro sujet clair précis

Tehnik yang bagus. Tank you

Very good example 💯

Excellent

You're hand is superb,

Beautiful nice work no words

Great video , yes its all practice , like most things in life really. But arc length is the real secret to master , after that the rest seems to fall into place easily.

@therealspixycat

2 жыл бұрын

It would be very nice to see a video on just the arc length. People talk about it like Jody but never really explain it

@tomthompson7400

2 жыл бұрын

@@therealspixycat as a rule of thumb arc length wants to be the distance that the metal in the middle of the rod is ... adjust slightly to suit after that .. but that's my rough guide.

@TheAefril

2 жыл бұрын

@@tomthompson7400 Do you mean the welding stick core (just the metal instead of the metal with the flux coating) diameter?

@kf8575

2 жыл бұрын

@@TheAefril yeah just the diameter of the metal core of the rod. Although with low hy rods, you need a shorter arc than that, ideally as short as possible without stubbing it out👍

@user-sy6cq3un4f

7 ай бұрын

Спасибо всем сварщикам, делящимися своим мастерством. Больших разводов или стёжек, вчера сварил электродами "лб, японские и есаб,ок 46. Отлично заварил большими стёжками свою дышловку на прицеп. И всё благодаря мастерству здесь на видео. Спасибо добрым людям, здоровья Вам всем. Наконец то я освоил этот большой шов.😊😉🙃🙂 в свои 58лет😅😂🙋

Felicitaciones amigo .bien explicado . gracias . Desde Colombia

わかりやすいですね。

Lovely welding.. are you using 7018 rods 2.5mm? That’s what we use on our videos and the results come out lovely.

Great video thanks sir for that

Can you do a video on just one topic : reading the weld puddle when stick welding?

@jamesordwayultralightpilot

2 жыл бұрын

(SECOND COMMENT) ...one side to the other. Adjust heat so the weld is almost flat when the bead is done that's when you know you got good penetration. It's literally all about practice. I watch behind the arc at the dim area where the puddle cools. If it looks like both pieces are cooling evenly and not more on one piece than the other then I don't adjust my circles or stick angle. But when you just start out, pay attention to that area and slightly change your method and see how it affects the cooling puddle. Problem with welding is people think they can study it and ask a million questions and it will just suddenly become clear to them. When in reality you just need to practice all day everyday and by the end of the week, you'll probably understand how to do it right.

@jamesordwayultralightpilot

2 жыл бұрын

(FIRST COMMENT)Just practice. Don't get complacent and only try one method. Once you can build knowledge on what you were doing and how the weld turned out you can tweak your method. Just don't hold the rod too far from the material otherwise you get pinholes. Always lead the stuck across the joint, don't push the puddle. I've always had the best luck with small circles, just be consistent with them and the weld will be parallel from

티그뿐 아니라 다양한 분야에서 실력을 보여주시네요. 용접기술은 예술, 학문과 같아서 끝이 없어 보입니다. 용접자세와 전류,전압, 모재, 필러금속의 재질과 피복성분에 따라 다양한 변수가 있어니 위빙도 간단히 정의하기 힘들 겁니다.

@AloysiusOHare-fk4yq

5 ай бұрын

And let's not forget the placement of the grounding clamp!

Где на практике может пригодиться такая сварка? У нас в России не варят стерильные пластины в нижнем положении. Как правило из земли выкапывают две пластины толщиной 60-70 мм, макают в солидол, делают разделку кромок шириной 1/10 метра, находят максимально толстый электрод, (за не имением оного арматурину) и варят на максимально возможном токе обычно 300-500а( обязательно нужно приговаривать про себя " ток ураганный - шов монолитный")

Cool !!

Good vidio welding with electroda 6013 👍

Very cool

Profesional 👍

I would love to see a macro of those 3 and see what they look like inside.

Good videos tutorial brother

Great skills

I was in college I did welding I wish they would have taught me like this

Muito bom trabalho

It's the penetration that counts the flux capa a pretty pass is nice but theyre not always the strongest.

잘 보았습니다. 👍

슬래그 분리 너무 기분좋게 일어나는 군요ㅋㅋㅋㅋ

I wanna practice this!

Very nice video 😍👍

Tetap semangat, sangat luar biasa skilnya

Chào bạn video thật tuyệt vời hay lắm bạn

I like the tutorial 👍👍👍👍

Amazing

Кольцами варю обычно, когда надо заполнить большой вертикальный зазор

Good work bro

Thanks a lot brother

Weaving is useful when filling in gaps or buttering but results in excessive heat input. Navy code requires stringers so it is is imperative you learn stringers. I am still a novice so this is just an opinion.

Wonderful

Hola, consulta, tienes videos de esos mismo pero en diferentes posiciones que me dejes para verlo? Muy bueno tu contenido, saludos !

According to thickness, it needs to adjust amperes. When performing elec-welding, just do it. If you wanna make a clear line.

Asi se deve enseñar, e ejemplos y las escoria sola se levanto. Muy bien hecho.

아크로 배관파이프 빽넣는것좀 알려주세요.티그+아크이거나 티그 +co2로 배관 파이프 하는것도 올려주시거나 아크로 빽내고 아크로 돌리거나 co2로 빽내고 배관 니꾸채우는것도 올려주세요.궁금하네요.보고싶습니다.

Great

3th one is the most difficult one but looks veryy nice