I always add my liquid first, about 1/3 of the way up, then add glitter. Finish filling with liquid and wahlah! Less bubbles ☺️ beautiful cups hate you had to pitch a couple.

Thanks for the video 😊 Timestamps: 0:21 - eye contact solution 3:43 - baby oil 6:35 - Elmer’s glue 10:43 vegetable glycerin

@KristisCustomCreations

23 күн бұрын

@@Queenieb03 thank you for the time stamps!

I used the Elmer’s magical liquid mixed 2/1 with majority of it being distilled water. It lets the glitter stay suspended longer than 50/50 glycerin/distilled water mixture.

@KristisCustomCreations

Жыл бұрын

I had the Elmer's magical liquid too but I only had 4 glasses to play with 😂 I would like to give the magical liquid a try soon tho! 🥰 Thank you! ❤️

@kyleelind5969

Жыл бұрын

This is what I tried the first time too and liked it! Gonna try contact solution next

@andreadelcid6287

Жыл бұрын

So 2 parts distilled water 1 part magic liquid?

@jeangrandy8672

6 ай бұрын

What is Elmers magical liquid? What are the measurements for this mixture?

@amtodd85

5 ай бұрын

Thank you so much for this

This is the most helpful video everyone just mentioned the glycerin heh forget that!!! The contact solution is a perfect choice!! I'd love a video where you test coloring the solution with mica powder and also adding polymer bits to it. You helped me so so much with this thank you!

Out of all the videos ive watched on how to make these cups yours is my favorite, simple easy directions, great video

@KristisCustomCreations

10 ай бұрын

Aww! Thank you so much!!! 🥰

I've use glycerin with fine glitter in my snow globes and it worked beautiful Thank You for showing us.

I use 2 tbls for every 1 cup of water, have never used the contact solution but I will try after watching this video, thank you for this informative video I love it.

I just ordered the kit before I even saw your video … can’t wait to try to UV resin …. And molds … ❤

These are beautiful! I had struggled with filling the hole so I gave up lol. I’ll try again after I sublimate!

@KristisCustomCreations

Жыл бұрын

Thanks! I have a kit that I bought from resin rockers that I'm going to try next for plugging the hole.

Oh my goodness you never cease to amaze me!!!! I absolutely Love these Gorgeous tumbler’s! You always make everything look so easy your just so flipping talented!!! And the sticker’s for the bottom of your tumblers are Beautiful… soo classy! I always get so excited when you put up a new video, bc your Creation’s are Always Gorgeous! I hope you are doing good, and As Always Blessing’s to you my Beautiful friend!🥰💗🌸

@KristisCustomCreations

Жыл бұрын

Aww! Thank you so much! ❤️ I definitely can't take credit for the stickers on the bottom of the cups, that is all Kari with Critter Cup Customs.. she's so talented!!! Blessings as always Mimi! ❤️

Beautiful job I'm gonna try ur method thanks for the video 😊

@KristisCustomCreations

Жыл бұрын

Thank you and thanks for watching! 🥰

I like the eye solution! No mixing lol

I agree with the previous post "The Elmers Magic Slime" works the best for me.

@KristisCustomCreations

Жыл бұрын

Thanks! I have some, just haven't been able to make any with it yet. I'll try it next! 🥰

I have contact solution that expired and it’s brand new still sealed. I felt bad throwing it away, glad I now have a use for it 😁

I tried the Elmer’s “magical” stuff and distilled water. It did bubble badly also. It’s really thick. I let it sit and gas off overnight but the bubbles didn’t go anywhere. After watching a few more KZread videos that recommended spritzing the bubbles with 91% alcohol, I thought I give it a try. . It totally worked. It’s been about 2 weeks and you can shake it and the bubbles don’t come back. It is a very dense solution so it moves very slowly and the glitter stays suspended , which some people like because when you have your drink in your tumbler you can’t keep shaking it. I think there might be a correct proportion of water to glue that may make it work great. Just not sure what that is yet. Thanks for doing the video. I love these comparison videos. It give us options!

@manmeals441

6 ай бұрын

Sounds like 40/40 water/glue and 20 alcohol:)

Wow nice❤

Try putting some of your liquid in before glitter. Some have said it keeps glitter from clumping at the top.

How pretty! I cannot wait to make one. Please give me the link for the cute stickers!

Hello i wonder how it different it would be with the glue mix if you put some of the liquid in the cup before the glitter was added maybe can be your next video? 😉

So thankful I found this video! I just tried my first snow gloves with glue/water and had the same problems! I thought it was me! 10:13

@KristisCustomCreations

Жыл бұрын

It definitely wasn't you! Lol. Reference the glue / water, I've had a few suggestions saying to add some water before adding the glitter and that it helps. I found that I like glycerin/water and contact solution best So I probably won't be trying the glue again. Lol

@jamievanwagoner3754

Жыл бұрын

@@KristisCustomCreations I did that and still no luck. I think the mix is too thick and the glue binds the glitter and the glitter can’t break free.

@KristisCustomCreations

Жыл бұрын

@@jamievanwagoner3754 good to know, thank you! I'm definitely gonna stick with what works for me! 🥰

Love these!! new to your channel where do you get your tumblers from?

I'm getting ready to try my first snow globe tumbler. Do you recommend fine or chunky glitter?

If you mess the tumblers up you can shake the liquid and glitter out into the trash. Then keep rinsing until everything is gone. Then i do an alcohol rinse after dawn dish detergent

Wow! Thank you for doing all the testing! Much appreciated. 💐❣️. P. S. Doesn’t the contact solution make the glitter settle quicker than the glycerin or baby oil? Thanks again! 🌻

@KristisCustomCreations

Жыл бұрын

Yes, It settles and moves a lot faster with contact solution. The glycerin and baby oil is a much slower settle.

This video was so helpful! Thank you. Any chance youve successfully shipped a finished glass? Do they ship well?

@KristisCustomCreations

7 ай бұрын

I'm so glad you found it helpful! ❤️ I did ship one glass tumbler. I made sure to put lots of padding around the glass and it shipped just fine. 😊 I would recommend making sure that it has insurance on it though because USPS can be so rough with packages.

add your liquid first about a half to an inch.. also i use elmers clear glue and elmers magic

I use the Elmer’s glue…bubbles oh yes lol I watched lots of videos and they said to degass for about 24-48 hours. I love the way it flows. Fine glitter is the devil. It clumps really bad in the glue.

@manmeals441

6 ай бұрын

Just a thought...40% water, glitter, 40% glue, 20% alcohol. Shake!

I was wondering if you would know or anyone if lens cleaner would work?

You should add less glue. Try lower down your glue ratio and add more distilled water. Some people like slow effect.

Are you using the baby oil only or mixing with water?

Add alcohol to the glue distilled water mix. Cuts bubbles - use less glitter when you start

Use Elmer’s magical liquid. I like all them except the glue one. Where did you get all your decals?

@KristisCustomCreations

Жыл бұрын

Thank you... I actually had Elmer's magical liquid but I only had 4 tumblers so I didn't try that one. Lol. I got my images on Etsy.. they are digital files that I sublimated on to the glass. In my previous toutorial where I sublimated the tumblers, I have the links to the Etsy listings in the description.

Hello, can you share the best place to order the double glass libby cups?

@KristisCustomCreations

7 ай бұрын

Hello, I have recently bought some from Stainless Depot and they were great quality

For some reason I got a lot of bubbles at the top that moves depending on how my cup is sitting when I used the contact solution, any tips?

@KristisCustomCreations

6 ай бұрын

Try tilting the cup and fill in the bubbles with a syringe. You want as little air as possible in there before you seal it up. :)

Great video!!! Where did you get your tumblers from?

@KristisCustomCreations

Жыл бұрын

Thank you! The Tumblers in this video came from a random company I found online but I did not care for them because they were all different sizes from each other. I ended up buying more from the stainless steel depot and I was much happier with the ones that I bought there.

@AmysExquisiteGifts

Жыл бұрын

@@KristisCustomCreations thank you. I ended up going to the stainless steel depot. Thank you so much for commenting back and the video content.

@KristisCustomCreations

Жыл бұрын

@@AmysExquisiteGifts you're very welcome! 🥰

can you use fine glitter in these or is better to use a chunky glitter?

@pinkrain96

10 ай бұрын

Better with chunky. Fine glitter clumps.

How did you get the hole at the bottom? I'm new to all of this, and my family challenges me every time.

@KristisCustomCreations

5 ай бұрын

The cups actually already came with holes in them. 😊 Since making this video, I've been ordering my glass globe tumblers from Stainless Steel Depot and they are great.

how did u get the hole in the glasss with out breaking it

@KristisCustomCreations

Жыл бұрын

The tumbler came with the hole already in it.

Thank you I have been wanting to make some I now will I have everything I need would love to send you p pictures when I'm done

Good night do I have a link for the person that does your label they look very nice

@KristisCustomCreations

Жыл бұрын

Thank you! A company on Etsy called GiftmanUK created it for me but I don't think they are still selling them on there, I had it made a few years ago. There are plenty of companies on Etsy who can make awesome logos. 😊

@moniquemoss626

Жыл бұрын

@@KristisCustomCreations thank u for the reply

@KristisCustomCreations

Жыл бұрын

@@moniquemoss626 you're very welcome!

I have a question. My snow globes came with a sealer. I see that you used silicone did you do that for appearance purposes or is it best not use the seal that came with it.

@KristisCustomCreations

7 ай бұрын

You can use the seal that came with it. The ones I originally ordered did not come with seals, that's why I didn't use one. I have used some since making the video that came with seals and they worked perfectly.

@latresastateman985

7 ай бұрын

Okay Great thanks so much. Do you seal it with uv resin after you put it on?

@KristisCustomCreations

7 ай бұрын

@@latresastateman985 you're welcome! Yes, definitely seal it with UV resin after plugging it

No idea what you did with the glue mixture. You have to put a bit of straight distilled water in first, THEN the glitter, THEN the glue mixture.

@KristisCustomCreations

Жыл бұрын

Good to know! We mixed the glue with distilled water which is what we thought we were supposed to do. Then we put glitter in the tumbler and the mixture into the tumbler. That obviously didn't work so I definitely appreciate the advice!

@tracygee

Жыл бұрын

@@KristisCustomCreations Yeah, getting the glitter wet with distilled water before pouring in the glue/water mixture will keep it from sticking at the top of the glass.

@KristisCustomCreations

Жыл бұрын

@@tracygee thank you! 🥰

How do we make the hole on the cup

@KristisCustomCreations

8 ай бұрын

The snow globe glass tumblers come with a hole already in the cup

I used glycerin and water not sure it works well

Hi I like your videos but let me tell you about me My name is Sierraleona but for short it’s Sierra in the Covid I had a Stroke and I went blind in my left eye so know I want to work but I can’t right now however I started liking the Tumbler I’ve even ordered some and I tried to make one but now I like In your video I like the last one I just need to know what is it again.

Can anyone tell me where she got the cup from

@whipitmyway

11 күн бұрын

Amazon

What brand name for contact solution

@KristisCustomCreations

3 ай бұрын

It was just a cheap Walmart brand contact solution.. I think Equate

Are contact solution and saline solution the same for tumblers? I have been struggling HARD getting my glitter to flow. I’ve tried probably 4 different “recipes” and ruin all 4 tumblers 😢

@KristisCustomCreations

Жыл бұрын

I don't think it would be considered the same thing. I find that using the Walmart brand of contact solution, which is pretty an inexpensive, is what I like using best. Which recipes have you tried so far?

@mrsravenrose2u

Жыл бұрын

@@KristisCustomCreations the Elmer’s magic liquid, clear glue and water, water and glycerin (once equal parts and once 1 part water to 3 parts glycerin), and mineral oil.

@KristisCustomCreations

Жыл бұрын

@@mrsravenrose2u oh okay, probably give the contact solution a try. It has been my favorite out of all of them. I think you will probably find it works a lot better than some of the other alternatives.

@mrsravenrose2u

Жыл бұрын

@@KristisCustomCreations thank you. Walgreens has 24 Oz on sale buy one get one half off. I’ll get some tomorrow and let you know how it goes!

@KristisCustomCreations

Жыл бұрын

@@mrsravenrose2u Yes, please definitely let me know how it goes!

Why wouldn't the tumblers come with a plugs? That's weird.

@KristisCustomCreations

6 ай бұрын

I have no idea why that particular one did not come with plugs but I haven't bought with that company since then. I have ordered glass globe tumblers from stainless steel Depot since making this video and they all came with plugs.

@HAL-2023

6 ай бұрын

Thank you! I have been looking a long time for somebody to show me how to make the shimmery liquid process. Just got some contact solution and glitter today. Starting on some snow globes. I’ll have to show you picture when I’m done:)

@KristisCustomCreations

6 ай бұрын

@@HAL-2023 I would love to see how they turn out when you are done!!!

a spray of Alcohol will pop the bubbles.. when using the glue method poor some of the solution in the tumbler first.

@KristisCustomCreations

Жыл бұрын

Thank you 🥰

@lettsgav001

Жыл бұрын

Pour.. not poor.. LOL!! thats what happens when I don't have a light on when typing!

@KristisCustomCreations

Жыл бұрын

@@lettsgav001 🤣 I knew what you meant. Lol

'promo sm'

💡 @‌AlphaDTFPrint invites you to explore their latest post, diving into the creativity of DTF printing on military tees. Share your thoughts on using uniforms as a canvas for self-expression! 🎭 #DTFprinting #AlphaDTFPrint