Let me know if you want to see me make one with a mixture of clear glue & water. ✨

@123rororose

Жыл бұрын

Yes pls

@tiffanyrachowicz6426

Жыл бұрын

Yes!

@CubersGottaCube

Жыл бұрын

That would be great!

@katyhy

Жыл бұрын

I haven't tried it with glue yet - would love to see your version for sure!

@AnaTorres-ip4wr

4 ай бұрын

Yes please 😊

To get rid of air bubbles, overfill the top and then use a syringe with a niddle at the end and put it in the air bubble to suck up the air and the solution on the tip will go in 😊

I love the glitter choices - so pretty! I've been making a lot of these tumblers the past month - my favorite solution is a combination of distilled water, glycerin and magic solution. Adding the magic solution helps to suspend the glitter so you don't have to shake it so much. Also, plastic squeeze bottles to insert the solution is a must. You can pick up condiment bottles at DT. Lastly, I use a small funnel to insert my glitter - it's so much faster and less waste and yes, stay away from the fine glitter due to the clumping. I also mix the glitter with the resin before applying to the bottom. I feel that it helps to distribute the glitter better and only takes one coat. Hope this helps.

@KaylasCricutCreations

Жыл бұрын

Thank you so much for all the great tips!!! Is the magic solution the same thing as Elmer’s glue? I tried another tumbler after this video with Elmer’s glue and water and liked the result a lot better! It definitely flowed easier and I liked that it didn’t get all oily from the glycerin. What have you been using to seal the tumblers? I’ve been using vinyl sheets still because I can’t seem to find another way that works lol!

@katyhy

Жыл бұрын

@@KaylasCricutCreations I've been using the Gorilla Glue strips to seal mine and have not had any issues whatsoever. I go over them with the UV resin mixed with matching glitter. The Magic Liquid is different from the Elmer's Glue. It's also clear and a bit thicker than the glycerin but is a bit more pricier which is why I don't use it full strength or even 50/50 with the distilled water. My next attempt is to try the glycerin/baby oil method mixed with mica powder to create a lava lamp effect. I'm a huge True Crime fan so I want to try and imitate blood droplets. Those sell pretty quick at the market I participate in.

@CheleRocks

Жыл бұрын

I have a squeeze bottle and funnel. Neither of which fit in the hole of these tumblers.

@mikeblankenship8040

Жыл бұрын

I'm getting air bubbles 😢 tried glycerin w distelled water and another cup tried contact lense solution and another baby oil the last 2 straight no mixture so far baby oil has small.ait bubble the other a mess how do I elimate air bubbles

@smithmafia1999

6 ай бұрын

Thank you this is the information I need really want to make tumblers

Thank you so much Kayla. These options are so pretty and your patience and explanations are amazing.

@KaylasCricutCreations

Жыл бұрын

Thank you! That's so nice to hear! It definitely took me some trial and error to figure out what works but I just love how they turn out!

Great job explaining and sharing with us your journey ❤

Love the colors of glitter. I usually mix the uv resin with the glitter for the bottom because it gives better coverage

@KaylasCricutCreations

Жыл бұрын

Great tip! Thank you!!

I saw another video where they used clear Flex Seal tape before the UV resin. It's designed to stop liquid leaks, it's genius!

These are really beautiful! Now I want to try some… 😁 Thank you! 🌸

I use fine glitter on my cups all the time, what I do to avoid those clumps is to shake the glitter in the cup before you add the mixture and then again after the mixture.

The tumblers are so pretty 🥰

@KaylasCricutCreations

Жыл бұрын

Thank you! 💗💗

These are beautiful! I def woulda used a little funnel though 😂 I was try this out!! Thanks for showing us your trial and error 🫶🏼

Great video. One thing that may help and not hard to make. Have your husband make you a box out of plywood, Just 3 sided and no top. Where you can put your tumbler in it and set the UV light on top so you don’t have to hold the light.

My first time seeing this and live this thank you for sharing look forward to more

Me encanta Los ame a Los dos ❤👏🏼👏🏼👏🏼

Really nice

Pretty tumblers... you can use clear tape like packing tape to seal your hole also and it won't show up under your uv resin.

@KaylasCricutCreations

Жыл бұрын

Thank you so much!!

At the end with the hole and air bubbles. Poke a straw down in and tilt around:) kinda got to chase them but it works

It’s a static thing with the film on glitter I think but just a bit of Dawn with un clump it then finsh off with alcohol like you were doing.

Thank you so much for this video I am new to youre channel but this is super helpful 😊

I love these!!! They are so pretty! Can you use ice cube in the drinks without affecting the contents of the glitter mixture? Thanknyou!! 💖. P. S. About the air bubble…couldn’t you use the syringe to suck it out? Thanks!

Thanks for the video! You should be able to get the air bubble out by putting the syringe in the hole and pulling back on it to suck the air out. Easy peesie.

Ok so I found that if you take just a drop of dawn soap small amount in the liquid. Mix your fine glitter in the solution. It un clumps it and just spray the hole with alcohol and pop bubbles as it de gasses

I love your videos ma please I am a starter where can I get all these cups and the glitters and how do I start

Subscribe from watching this video, thank you so much for your video. This was very helpful and unique

Girl, invest in a little funnel for that glitter! Lol. Your tumblers are like all of your other projects, beautiful! Edit ~ you may be able to get rid of bubbles with a pin by directing the bubble to the hoke and poking it? Or use the syringe in reverse and draw the air back out?

@KaylasCricutCreations

Жыл бұрын

LOL! I'm not sure why I didn't think about that. It would have made it a lot easier. Glitter was everywhere 😂 Thank you!! 🥰

@KaylasCricutCreations

Жыл бұрын

Thank you!! I bought a couple more tumblers to test out. I bought a needle tip bottle and I think it'll help get rid of the bubbles. Trying to draw the air back out is a really good idea too! I'm hoping to post an updated video soon after I try out a few different things! :)

@lisamariedesignboutique

Жыл бұрын

@@KaylasCricutCreations funnel won’t help with chunky glitter since the space from the hole to the inside, it doesn’t allow for a smooth flowing process & you need to still bang the side to get the glitter to move off the inside landing. I also wouldn’t suggest the needle nose bottles as the needle opening is super small. You will drive yourself crazy trying to fill it that way. I would suggest getting some blunt syringes off Amazon, they work a lot faster and they are long enough you can get them in the hole and point them down the side somewhat! As far as the bottom glitter, I would suggest not using chunky next time and just try to find a fine glitter that’s relatively close to what you’ve put inside, as it has much better coverage and I would mix it together with your UV resin in a small medicine cup, and then kind of just pour it on so that way you’re not needing to put several layers of UV resin on the bottom. Also, you can put just a UV resin around & in the hole and curate that way as your barrier. Then you can do the glitter mix & UV resin over the top of that! I hope this helps.

@KaylasCricutCreations

Жыл бұрын

@@lisamariedesignboutiquewow!! Thank you so much for the helpful info!!!! I’m making some more out this weekend and can’t wait to try your tips.

How did you remove glitter from the glass tumblers? I have glitter shapes stuck in the top rim.

So the tumblers I got come with little rubber bumpers that fit directly in the hole. I just resin over those…I’ve personally never seen the tape thing

@Skyboo9

4 ай бұрын

Can you tell me where can I get cups like those ?

I use glycerin, water, and magic liquid. I wouldn’t fill them all the way and that air bubble helps if people take them out in the summer. They can actually crack/break if they’re too full then exposed to heat 😅

@KaylasCricutCreations

Жыл бұрын

Good to know!!! Thank you!!

I was watching your video while I was making my very first snow globe tumbler. The only real question I have is how do you know how much glitter to put in? How do you know if you have too much, or too little?

Reañly cool. Are they dishwasher safe?

Came to see why my glitter was so chunky 😩 it's fine. I have already dumped it once. Looks like I'm dumping it again. Tips on clearing it out? I didn't get it no where near as clear as you did.

An ink needle works very well getting those pesky bubbles out

Do you place a little layer of resin over the vinyl?

Would an ultrasonic cleaner seperate the clumps?

The uv gel stays on the bottom good ?

Hi! I am looking for a cricut and was wondering what you would recommend? I love this video and am looking forward to making these tumblers when I get my cricut!

@KaylasCricutCreations

Жыл бұрын

HI! It kind of depends on what type of projects you want to make. I usually recommend the Cricut Explore Air 2 or the Cricut Maker machine. The newest machines out there are the 3 they have a few added features but to me not worth the price. I have a video I put together showing what the different machine do. You can watch it here: kzread.info/dash/bejne/dHiYwaqGqZXHqJs.html Also Cricut has a chart on their website showing what each machine does: cricut.pxf.io/vNzjay Hopefully that helps! :)

@bakingrcc

Жыл бұрын

Thank you so much!

Can you use sublimation on these tumblers?

are these tumblers for hot and cold drinks or cold drinks only?

I just purchased 2 of these looking here on KZread contact solution would be best, since this will be my first time imma go to my local Michael's or Joanna's to get the other stuff I have a cricut I don't use

What mixture did you use?

Where did you get the cups from

Wjat kind of glue do you use

How much would you say it cost to buy all the materials? I want to make some for a birthday party

Yo kero 2 keder esta espectacular😮😮🎉

Where do you buy your glitter?

These are beautiful! You were very good about explaining all the steps and different ways to go about making it better. Can the tumblers go in the dishwasher? .

@KaylasCricutCreations

Жыл бұрын

Thank you so much!! They aren’t dishwasher safe. You’ll want to hand wash them.

What is the solution made out of?

What are the measurements for the glitter

So no epoxy finish on glass?

What size cups are those?

Bonjour ,ou trouvez ces verres svp?

Where do you get the glass cups from?

@lingli7759

Ай бұрын

hey friend we have the glass at us warehouse, wondering do u still need these cups?

Why is my glitter getting stuck at bottom of tumbler

Are you using a ballpoint pen to weed?

@KaylasCricutCreations

Жыл бұрын

It’s called a pin pen tool. It is so great for weeding! I bought it on Amazon. Here’s the link for it I’d you’re interested: amzn.to/3JaxSaL

@Ncolgrl

Жыл бұрын

@@KaylasCricutCreations thank you!

Subscribing bc we have the same name lol😅

Try glue sticks

🍕 pizza

Kayla, has your channel been hacked? A certain Doctor has commented on each and every comment under this video. Can this be avoided please? Thank you!

@KaylasCricutCreations

Жыл бұрын

Hi! It’s a KZread bot, sadly :( I have reported and removed every one from the comments. It’s frustrating when it’s replying back to people’s comments! Thank you letting me know!