As a pro shop owner who does hundreds of switchgrips, Jopo has definitely come out on top for me. I have switched 98% of customers to these over the last 2 years and not 1 failure yet of any kind. That makes life easier for me. And the feel is more secure as I use them myself.

@LuisNapoles

Жыл бұрын

NICE!!

Thanks for the recommendation! I had the Vice grips installed today and it makes a world of difference!!

@LuisNapoles

Жыл бұрын

Awesome! Hope you love them!

Love the angle and grip video. Thanks!!

About to add interchangeable thumbs, had my PSO who primarily installs vice get in touch w his supplier to grab some Jopo’s to install in my arsenal. As always appreciate the great content and you’ve saved me hours of research again haha.

@LuisNapoles

Жыл бұрын

Jopo is the best IMO

Great comparison and info. Thanks

@LuisNapoles

Жыл бұрын

I appreciate that!

My PSO both uses and installs the Jo-Po. I’ve only used them for a short time, but they’re rock solid! Big fan!

@LuisNapoles

Жыл бұрын

Yea same here!

Thanks for the info!

@LuisNapoles

Жыл бұрын

Any time!

Thank you for making this video from you friend

@LuisNapoles

Жыл бұрын

No problem 😊

I use the VISE system. I love it .. works absolutely perfectly! .. and in my view, interchangeable thumbs are a MUST. I can't do without them. I have a lot of trouble with my thumb changing size during an evening of bowling. I frequently have to adjust my thumb with tape, both on my thumb and in my ball during an evening of bowling. My thumb can change from game to game sometimes, and if I didn't have an interchangeable thumb system, so that I can use the same unit in each ball, I would be spending most of my time adjusting thumb holes. I can't do without an interchangeable thumb system. They are simply a must for any active bowler.

@LuisNapoles

Жыл бұрын

Oh I Agree they are 100000% mandatory for any serious bowler! haha

Awesome video thank you

@LuisNapoles

Жыл бұрын

Glad you enjoyed it

I currently use the Turbo Switch grip. Used for about 10 years now. Never had one break as of yet, only issue u do have is I have to drill several new ones due to the sides wearing down after constant thumb switching. But I do love using them. JOPO would consider using it if my shop operator decided to bring it in. It looks like the best design that I've seen so far. VISE I haven't used before. I have seen many people before with the thumb grip separating from the bottom anchor. And in the middle of a tournament. I know VISE did a modification on the anchor & haven't heard of many issues after the change.

@LuisNapoles

Жыл бұрын

My opinion is that every GOOD PSO should give customers options for all of them

Used Turbo for years starting back in 2005-2006 and I have never had one break. I think different bowlers experience will vary based on how they treat their equipment. Vise seems fiddly to me as I've seen many bowlers struggling with either spacer rings loosening up or impact with the pins and pit causes thumbs to jam or to go missing. I installed hundreds of Turbos when I had a proshop back in the day and while I trust them, I think they could use an update. Currently I'm not using interchangeable thumbs since I just came back to bowling but I'm curious to try the JoPo since it looks like a great compromise / adaptation of the older systems.

I know someone who uses the vise one, but personally I don't use an IT, but I have thought about doing so. Also liked the new camera angle

@LuisNapoles

Жыл бұрын

Def try it! I will def add this angle going forward!

My local PSO carries the Turbo Switch Grip. I've been using them for about a year. Ive had one inner give trouble. The tabs got wear on them, preventing it from clicking into place. However, a small piece of thin slick tape on the side of the inner, near the bottom, snugged it up. However, I will mention the JoPo to my local PSO, he may start carrying them.

@LuisNapoles

Жыл бұрын

Def try them!

I've been using JoPo for a month or so now and definitely the only one I will ever use. I have them fitted for 8 of my 12 balls and gonna get the other 4 done soon. I have 3 inner done each a lil bit different and that's the way to do it.

@LuisNapoles

Жыл бұрын

Good stuff!

@joethomas5922

Жыл бұрын

What would need to be done to switch my current vise one's out for jopo

Like that camera angle!! Can see release, ball angle, footwork.

@LuisNapoles

Жыл бұрын

Yea I wanna add this to videos going forward!

I couldn't agree more with you on this Luis. Last fall I started swapping out my 16lb arsenal and downsizing to 15lb balls. At that time I let the pro shop owner know that I was going to be drilling 6 balls and was interested in the interchangeable thumb systems. He actually refused to put any of the systems in at the time. I was disappointed but went forward with building up my 15lb arsenal. This year (since March), I have lost a ton of weight and my fingers and thumb shrunk to the point where I couldn't keep a ball on my hand without squeezing the heck out of it. I found a new pro shop that was willing to put in whatever thumb system I wanted. I selected the JoPo and had sleeves put in on all 6 of my balls and had two thumb inserts created. One is just a touch larger than the other as we are coming into the warmer months and I expect my thumb to swell a little in the heat/humidity. I will have a third thumb drilled in the fall for the winter season that is a little smaller than the smallest that I have in preparation for the winter league and colder conditions. Overall I am really impressed with the system and I only wish that my local pro shop would have put them in from the start. I am glad I have them know (and that I found a new pro shop that will work with me) and will have an insert put in all of my new balls going forward.

@JMHuze

Жыл бұрын

Just for an idea of cost... To have 6 inserts put into my balls and two thumbs drilled, it was about the price of an average ball (about $180). It isn't "cheap" to switch an entire arsenal over, but it certainly is one of the biggest improvements you can invest in. I use the Michigan Marbles (Motiv) and have the Ambush, Sky Raptor, Mythic Jackal, Pride, Venom Shock, and Fatal Venom. The Pride currently bleeds over the Mythic and the Shock. The Sky Raptor requires too specific of a lane condition for me. I plan on adding a dry condition ball like the new Supra as well as a ball specifically for the cliff like a strong drilled Black Venom.

@LuisNapoles

Жыл бұрын

JoPo is just so good!

I like the idea of the same thumb feel for every ball but I love the way the inside a bowling ball feels compared to like plastic or even a plug

@LuisNapoles

Жыл бұрын

The problem is that ball to ball they will feel different

Camera angle is dope Luis! Ultimates are good. Kinda like Turbo but instead it locks into the outer sleeve on the sides with 4 points of contact.

@LuisNapoles

Жыл бұрын

I’ll have to look into them I just don’t know anyone that used them or even that installs them

@scott.church

Жыл бұрын

@@LuisNapoles yeah, they're pretty rare, and I'm not sure you could even use them since you're on staff. Big B owns them but doesn't push them.

Yes. I've been using the IT system for years. When you have your ball rejuvenated in the pro shop by heat, the plastic at the bottom becomes brittle. They also have a tendency to not feel perfectly secure. A friend and I both switched to the JoPo. It is great

@LuisNapoles

5 ай бұрын

I don’t have my balls rejuvenated and still had tones of issues! Glad I came to jopo

I used the IT grip, broke within the first month. Used the turbos and broke two within a month, but after a years use. Definitely going to try jopo next. Those look very secure and durable.

@LuisNapoles

Жыл бұрын

Yea I’ll never go back 😂😂

I have used the Turbo switch grips for 10 plus years bowling 2 or 3 nights a week and never had one break. The two tabs on the bottom do wear over time, but I am still using the first one I ever had. I have seen them break for other bowlers, but I have had good luck with them.

@LuisNapoles

Жыл бұрын

lucky you! I hope that trend continues for you 💯

I've only used the vise IT. Been using it for about 5 years and only had it break once, and had one get stuck due to the core expansion once. Overall very good

@LuisNapoles

Жыл бұрын

Yea they are great!

I've been using Turbo and Vice over the last 5yrs. Two of my balls still have Turbo, while Three have Vice. Had 3 failures with the Turbo and one with the Vice. Because I don't replace my bowling balls often, I would be reluctant to switch to another system. Maybe try the Jo Po with my next purchase!

@LuisNapoles

Жыл бұрын

its so good! You'll love it!

Good video I'm afraid to use them because I can't get my thumb out of the ball fast enough but awesome video bud

@LuisNapoles

Жыл бұрын

Well you’re gonna come outta the ball the same as when you drill into a slug or into the ball. Only difference is that you’ll be able to put that thumb into all the balls

100% agree, I switched to JoPo and they are stout as hell.

@LuisNapoles

Жыл бұрын

FACTS!

Good video. I have JoPo in a couple balls of mine. Just looking at the IT thumbs side by side it is obvious which is better. JoPo is just so much better engineered and manufactured, and looks it.

@LuisNapoles

Жыл бұрын

Agreed on that!

@HippieP629

5 ай бұрын

I'm just now getting back into bowling and just seeing the jopo "screw" design from this video makes so much more sense to me. It's like drilling in a long screw into a 2x6. That's universally going to be much more secure +shrugs+

I used to use the turbo switch grip but had 2 of them break so I stopped using them. About 4 years ago I started using the vise IT grip and haven’t had any issues.

@LuisNapoles

Жыл бұрын

Yea Vice is way better than Turbo IMO

This video It's very useful

@LuisNapoles

Жыл бұрын

Glad you think so!

Only have used Vise ITs, 4 years now. Yes, I have broken the bottom of the same Slug-IT (the white piece on the end of the thumb slug) twice. Initial install and repair was done by a Turbo PSO who also does ITs. Second repair was by a Vise PSO, who told me mine was one of the old ITs; and, to use it as a backup. No problems with my other Slug-ITs. Only other issue is if the core swells; you may have trouble getting the slug in/out.

@LuisNapoles

Жыл бұрын

Try the JoPo!

Hey Luis, I see this is an old video, but I like how you are describing these products and differences between each. Based on that, I've used 2 out of the 3 (IT, Turbo). I wholeheartedly agree and having the same happen to me with both IT and Turbo. I've used Turbo for about a year and after it broke during bowling league one night and the PSO only sold those. I then switched to IT system. I went to a few other PSO that only sold IT and I have been using IT for the last 15 years. I have not heard of JO/PO but will look into them. Question for you, Is the texture of the grips different then what you would get from an IT grip? Or is it just the new technology on how it secures into the bowling ball. Is the cost of this system on par with what you would pay for the IT system? I do remember Turbo being more costly than the IT system. I also know that for Turbo the hole drilled into the ball is larger than one for IT. I wonder if the diameter of the JO/PO and IT are similar Great Job. PM

I use the interchangeable thumbs . I love the vise it so I have a oval shaped thumb with tape to kind of squeeze the ball feeling with me putting a little pressure with pad of the thumb and I have broke 2 , Same with the turbo switch grip just a hair bigger but broke a demo day one in the turbo switch grip fingers, and the ultimate thumb I love the most. It to me feels more secure then the other 2. P.S I didn't know your a former pro shop operator , my dream is to have my own pro shop so it is awesome to hear that you said your a former pro operator that is awesome.

@LuisNapoles

Жыл бұрын

I would LOVE to open one one day!

@traviskirk3834

Жыл бұрын

@@LuisNapoles that is my goal . Start with a personal one or work in one then save up for it.

Jopo is absolutely amazing can't say enough about this company I've been using them for about 8 months now with no issues and can't find anything wrong with them I was always told I hit it to hard at the bottom and they would break but not with jopo. And yes the camera angle shows better ball motion

@LuisNapoles

Жыл бұрын

Agreed! yea I wanna add this angle more!

After a little over a year using the Turbo switch grip had 2 thumbs crack around the bottom. I switched to JoPo a couple of weeks ago and I feel more comfortable.

@LuisNapoles

8 ай бұрын

Yea lll never go back to Turbo. I had a ton of bad luck! I love me the JoPo

@mpsgt2004

8 ай бұрын

@@LuisNapoles since switching I feel more comfortable and my bowling shows. Shot 659 Thursday in league

Jopo is goated. By far the best. Also as someone who drills my own equipment, ilike that I didn't need different bit in order to switch from switch grip to jopo.

@LuisNapoles

Жыл бұрын

Yea thats a huge part IMO

Good video. I currently use the Turbo system. I've been using it for about a year now. I never had a thumb break, but I have had to put a piece of black tape on the outside of the thumb to make it feel snug. I am in the process of trying out the JoPo system. I had to convince my PSO to get what he needed to put the JoPo system. I willl be getting it put in this next week. Good to see a comparison of the different systems.

@greenmachine6146

Жыл бұрын

I learned a better way to snug Turbo inserts: Take out your insert. Grab a 90 degree pick and scratch/make a line in the outer sleeve (in the ball) from bottom to top, this will take moderate force. Insert your thumb slug after each scratch until it is as snug as you like. If you go too far, pull out the insert and sand down the ridges you just made. I haven't had a Turbo fail in over a decade. Had a bunch of the first version break before that.

@LuisNapoles

Жыл бұрын

Oh nice! I hope you enjoy the switch as I have!

Really liked the camera angle

@LuisNapoles

Жыл бұрын

I’ll need to incorporate it then!

I just started using turbo switch grips, and I love the thumb slug I have several bowling ball drilled with turbo switch grips, and thumb slugs and I won’t change too any other thumb slug because I like turbo that’s just my opinion

@LuisNapoles

9 ай бұрын

I loved them also till they started to pop out left and right 😂

I used to use the Vice IT and broke 2 mollies (piece at the bottom of the thumb hole. PSO said the only fix was to plug the thumb. Now I use the Jopo and love it. Just wish they had colors for the outside sleeve.

@LuisNapoles

Жыл бұрын

I just saw a post today that they added them!

I use the it's had them for four years only brokt an love them

@LuisNapoles

Жыл бұрын

Thanks!

Jopo is the closest feel to a glued in thumb slug. Extremely solid, never had any issue with it. The Switchgrip inners always felt loose after a few days. The worst thing is the feeling of a loose slug during your swing.

@LuisNapoles

Жыл бұрын

Agreed! 100%

I used to have Turbo Switch grips, however, being a lefty, I kept unlocking the thumb and having it come out. Switched to VISE I.T. and never had a problem since.

@kevtaz

4 ай бұрын

Same here. I’m lefty and was use turbo Switch. One time I wasn’t expecting when it turn loose after unlocked and got my thumb twist after bowling. Its hurt so badly. Decide to change to JoPo now and never had any issues since.

I’ve used vise for about 3 years, and just had my first one break. Big fluke of a hit broke the threading system in both the thumb and the ball

@LuisNapoles

Жыл бұрын

Oh no! That sucks though!

Great video Luis. Typically what is the additional cost for installation?

@LuisNapoles

Жыл бұрын

Up from there will be a cost for making the actual thumbs but after that its roughly $10 more per ball for the sleeve

#jopogrips for the win. We move so much jopo at our shop, it's actually unbelievable. I don't know how much I'm allowed to say, but jopo has big things coming soon 👀👀👀

@LuisNapoles

Жыл бұрын

I cant wait to see it!

Camera angle is nice. Can see the ball track better. How hard is it to change from one to the other?

@LuisNapoles

Жыл бұрын

very easy!

I used vise IT for about 7 years i think and then made the switch to turbo this year. I like that turbo is only half turn to twist in and out. never had any break 🤷

@LuisNapoles

Жыл бұрын

Fingers crossed they continue to not break!

Ive used Switch and IT grips. The tabs on the Switch grips can wear out but a nice band aid fix is a piece of tape in the liner. Another remedy is a very small rubber band wrapped around the tabs will make it more snug. Ive also used IT grips and I can feel them move slightly up and down on some shots. While it hasnt come out, that slight wiggle will mess with your head. Also had an IT grip break in the pit a couple of years ago. I would like to transition to Jopo but dont know of any PSO in the Milwaukee area installing them. If you're out there, give me a shout!

@LuisNapoles

8 ай бұрын

All that and JoPo has had zero issues for me

Even thought I have been bowling for almost 5 decades, I have avoided the Interchangeable thumb systems for quite a while. Because of my heavy wrist cup, my thumb only really kept the ball stable in my hand. However, since I can't get as deep a cup anymore (due to age), my thumb feel is starting to get more important, especially since I bowl a Sport Shot league over the summers. I just got the J-Pro installed on all my reserve balls, and had to tweak the fit of the slugs at practice this morning. NOW the feel is good. [I was not going to mess with my #1 ball until I knew the feel was good on the slug.] I love the way the thumb locks into the ball with a click. {Showing it to someone this morning, he was able to hear the thumb click in while standing 10 feet away in the parking lot.) You are also NOT going to accidentally unscrew the thumb, because it takes effort and some pressure to unscrew it. For reference, I am a former power bowler but age and injuries (in my mid-50's now) have forced me to change my approach, and that killed 6 mph from my ball speed, but I still have my full revs. Because of that, I have a large arsenal of plastic balls: Pyramid Pathogen Blue Dot, 2 Radical Spys (drilled different), T-Zone (Actually a strike ball for me), and Urethane Pyramid Plague X. My new #1 doesn't make sense, but it is the Clear Rose from KR Strikeforce. For me the ball turns hard in the back end and drives the pocket.

@LuisNapoles

Жыл бұрын

I’ll never go back!

I like the camera angle you had here at the end. I have used the Vise thumb for years. But I'm not afraid to change grips if it helps me improve my bowling. you said you have a shop here in LV that does them. Can you tell us who that is? I have not seen any of the local pro shops advertising them here in LV.

@LuisNapoles

Жыл бұрын

Yea I am def gonna add that angle! Check out any of the BowlersMart locations and let them know I sent you!

@davehansen2264

Жыл бұрын

👍 Thanks for that info and I will mention you to them.

I have vise. Never used turbo. But I want Jopo. I have had the bottom of the vise break.

@LuisNapoles

Жыл бұрын

Def give them a shot!

Haven’t had my thumb in ball since 1999 but I heard the Jo pro is awesome

@LuisNapoles

Жыл бұрын

NICE!!!

I have no major complaints with the VISE IT system in the last 2 1/2 years since I started using them. 2 minor issues, but I have no bad feelings towards the VISE IT. Unfortunately my curiosity got the better of me and I had my PSO replace the VISE IT to the JoPo TWIST in one of my older bowling balls. I feel the JoPo is a superior product and will over time have all my VISE ITs replaced with the JoPo TWIST. Unfortunately it will not be cheap😂

@LuisNapoles

Жыл бұрын

Oh I know this feeling ALL to well!

So I currently have the IT from vise. Would it be very hard to make the change to the JoPo? Thanks and love your videos.

@LuisNapoles

Жыл бұрын

Nope! It would be very easy because the drill bit for JoPo is bigger than the Vice one!

I have had several break. I have over 15 balls with the turbo insert’s. Would love to experiment

@LuisNapoles

Жыл бұрын

Time to make the switch then!

Camera angle is good. Can see everything well.

@LuisNapoles

Жыл бұрын

Yea I def wanna add it in going forward!

Can I install a jopo system into a ball that originally had a vise it system in it without plugging up the hole and redrilling?

Looking at the design, JoPo appears to be the most robust and durable designs of them all. Just the fact that the screw & lock portion is part of the slug's body eliminates the fragiler bottom locking mechanism of the other 2. They'd be #1 right now if they gave PSOs the install kit - like Vice & Turbo did.

@jeremiegrund

Жыл бұрын

They do offer kits to PSOs, they seem very interested in getting the word out

@LuisNapoles

Жыл бұрын

I don’t see why they wouldn’t do that?

I am new so please forgive my ignorance--do you have to install a separate sized thumb plug when you install these twist systems..i see they come with our without plugs from Jopo. thank you for your time

@LuisNapoles

Жыл бұрын

your pro shop will def help you with all that!

I have turbo thumbs and I have had multiple break, sometimes they get stuck in the ball and other issues to, but no pro shop around me uses vise stuff so I don’t really have a choice

@LuisNapoles

Жыл бұрын

You do have a choice! Find someone who will do the other brands! A real pro shop will give its customers options!

I've heard different preferences for the actual texture if the thumbhole is why people pick one over another. Any thoughts you have for the actual texture of all 3?

@Fluffyguy958

Жыл бұрын

Jopo sells an inner that doesn't have a thumb slug in it. I have one with a vise slug in it and one with a vinyl slug

@LuisNapoles

Жыл бұрын

They all make em with no slugs in them also and you can put your own thumb in there

The Vise It’s are by far the best. I bring six balls to the bowling alley, and I don’t know what I would do without them. A really good benefit to interchangeable thumbs are that if you use tape in the ball, it’s much better than just a regular thumb hole. The vise it’s never broke for me. I’ve had them for 3 years. I can tell you one thing, the turbos suck. I know MANY people that have it and they break All the time. If you are thinking about getting a thumb, get the vise it’s.

@LuisNapoles

Жыл бұрын

Vice is GREAT but have you ever tried or looked into JoPo?

Good camera angle. I just had a new ball drilled and I don’t know what happened the guy measured everything used the tool for finger size but the thumb hole is so big I can see at least 1/4 inch space. I’m sick. Will the Jo Pro fix this? I think it’s so big that tape won’t fix it.

@LuisNapoles

Жыл бұрын

I would go to a different pro shop and have them drill out that slug and start interchangeables with that ball and I would recommend JoPo 10000000%V

I have never used interchangeable thumbs or any kind of grips. I think it would help me tremendously, though. My biggest issue is that my thumb is so weirdly shaped and swells constantly, thus making my shots very inconsistent. I live in Southeast Ohio, so I would have to drive over an hour and a half to even find someone to install them. Otherwise, I am a 212 avg bowler, trying to get to 220 in the next year. Peace.

@LuisNapoles

Жыл бұрын

I highly recommend you try them

I use the IT but they keep breaking on me and I was thinking about getting rid of it until a friend told me about the JoPo so I want to switch

@LuisNapoles

8 ай бұрын

Jopo is the GOAT

Griploc was the first to make the interchangeable thumb but not many shops use this system.

@LuisNapoles

Жыл бұрын

Never heard of them!

I've been thinking of switching to IT, currently I have a thumb mold I use which works very well, but its pricey. Can you talk a little bit about which one is best for small super flat thumb shapes for women. Or if that even matters.

@LuisNapoles

Жыл бұрын

Doesnt matter because once you get a thumb right you can put into all your bowling balls and then as your thumb shrinks or swells you can go to a bigger or smaller size

Nice video Lou. JoPo looks interesting for sure. I have never used an interchangeable thumb. For me the feel of the thumb is vital to a proper release. Only one thickness of thin black tape can throw off the whole release. I have m PSO drill my thumbslug to an exact "bit size" that is slightly larger front to back than my thumb, but smaller side to side than my thumb. By using a "bit size" I am assured of the identical hole size on every drilled ball. Then I use tools at home and "hand carve" the oval. I use a telescopic gauge to measure the width until it matches my other balls. Then I hand sand and smooth the hole removing all edges and creating a perfect smooth bevel. The final step is inserting white grip tape in the front and black tape in the back until the front to back size matches my other balls. This process takes about 3 hours per ball. It is a pain in the butt for sure, but to make all thumbholes identical by hand is not an easy process. Perhaps you can answer some of my fears of using an IT: -How do I hand carve it? -What if it screws in slightly more to the left or right from ball to ball making the oval not in the same orientation? -Will the need to drill a much bigger hole change the dynamics of the ball balance in a bad way for a Full Roller, taking out too much thumb weight? -I use 7/8" forward thumb pitch on a conventional grip, will the extra depth needed on an IT cause the drill hole to break through into the fingers?

@LuisNapoles

Жыл бұрын

Hand carve the same way you did before You have to make sure to install it correctly lined up tp your center of grip Wont be a noticeable difference because your thumb is already a large hole you know Will only reach there fingers if you have a TINY span which you dont LOL TINY like 2 inch span

@nordattack

Жыл бұрын

@@LuisNapoles Cool! Thank you. Will give it a try then!

Can a thumb mold be installed into the JOPO?

So I watched this vid a while back and thought to myself that I really like the JoPo thumb system. Unfortunately there were no PSO’s in my area that offered this system. I first had the Turbo system in all of my equipment and had 2 break on the same league night. I then switched to the Vise IT system and had fairly good luck for a couple of years until recently when both the thumb and the sleeve at the bottom of the ball broke. I recently started using a different PSO and asked if he could install a JoPo for me to test. He is ordering one and is going to install. I’m really looking forward to trying. Thanks Luis for this evaluation.

@LuisNapoles

Жыл бұрын

NICE! I hope it works out for you as it has for me!

I have Turbo Switch Grips right now, and I have the same problem: Every single one I've ever had has broken. The locking flanges at the bottom always break after a few dozen games, and I end up having to put electrician's tape on the outside of the barrel to ensure it doesn't fall out of the ball. I'm switching to JoPos this year when I update my arsenal.

@LuisNapoles

3 ай бұрын

cant go wrong!

I have used all 3 systems. I have had both Vise It and Turbo Switch Grip Fail. I have not had a jopo fail yet. JoPo is hands down the best of the 3 and in my shop we promote jopo more then the others. Its just a better system.

@LuisNapoles

Жыл бұрын

couldnt agree more!

Been using turbo switch grips for 12+ years and never had one break. The only reason I’m not using the thumbs from then is that we have changed my spans and pitches a few times over the years and I had to get new thumbs made. I have seen ITs break and also get so stuck they had to be drilled out. But I’m sure with any of these, you do need to take some care with them.

@LuisNapoles

Жыл бұрын

yes!

Recently I heard the jopo were becoming unable to go into balls. That’s what my PSO told me anyway. I was just about ready to try jopo

@LuisNapoles

Жыл бұрын

unable how? I just did a few balls with JoPo and did it just fine

@nickdallas8528

Жыл бұрын

@@LuisNapoles eubanks said it’s certain balls where the core is swelling and making it so you can’t get the thumb back in. My PSO has had some issues with it as well. He sells a lot of brands of Brunswick so I’m thinking it was those brands

Been really looking into these systems. Having trouble with the fit 90% of the time and hurting my thumb. My main question is, how is the insert measured? Does it have to be drilled as well? or are there many "sizes" and just taper it to my feel? Thanks!

@LuisNapoles

7 ай бұрын

Drilled as well

@derekrojoharrington9445

7 ай бұрын

Thanks @@LuisNapoles. BTW, does your shop ship to Mexico? All the best!

So i have a question, could 2 totally different use the same ball if both of the people have their own interchangeable thumb, havnt been bowling for a while was just curious

@LuisNapoles

7 ай бұрын

Would depend on the pitches and span

I wish our local PSO had JoPo interchangeable thumbs. I currently have Vise IT and like ok.

@LuisNapoles

Жыл бұрын

Makle them get them! haha

I currently have no thumb system inserted and feel like I'm trying to hold onto the ball or am squeezing so much.. Newer to bowling. Should I look into them?

@LuisNapoles

Жыл бұрын

100% yes

For me watching this video I look at the point of release and the turbo was iffy always thinking don't break , the vise it I think is good a little more secure then turbo and less thinking don't break , and the jopo twist is way more secure and looks ALOT better for you while I was watching your release with the jopo. But that is what I think .

@LuisNapoles

Жыл бұрын

I appreciate that!

Great vamera angle.

@LuisNapoles

Жыл бұрын

I'll need to add it in!

@dweb6916

Жыл бұрын

@LuisNapoles also, the Turbo switch grip is what i have used. I don't leave then in the balls. The come out after cleaning.

I am limited to what my pro shop operator will install. He uses Vice and I personally have not had any failures. My only issue with Vice is that sometimes you need a tool to get the thumbs in and out. JoPo does look more robust. Are they easier to insert and remove from the ball?

@scottaustin4015

Жыл бұрын

Jopo is so easy to install and remove I've never had to use a tool to put them in or out absolutely will never go to any other interchangeable again

@LuisNapoles

Жыл бұрын

All systems are limited to the core of the ball swelling but once that happens I have found that the tool for Jopo is really good !

Do you use blank inner sleeves and slugs with JoPo? If so, what slug? What is the material that comes in the filled inner sleeve?

@LuisNapoles

Жыл бұрын

I always use black on all of them

I have experience with turbo, ultimate, and Jo po. Here are my thoughts Turbo: not a fan. It’s a decent product, don’t get me wrong. But it relies solely on those two little tabs. They tend to break, and if they don’t break, they wear down over time causing the thumbs to not lock in. Ultimate: more like ultimate trash IMO. More reliable than turbo from my short experience over a few months. Two larger tabs built into the side of the sleeve. This appears to be more durable. BUT they system has more slop. I can feel the thumb inners wiggle up and down by a few millimeters when I throw the ball. This was with multiple inners and outers. Maybe I had different tolerances with different manufacturing forms. Idk. Not a fan. Jo po: best. Hands down. Super secure. Three locking tabs with a different type of locking mechanism at the bottom. They actually screw into the system creating much more surface area to reduce force on the tabs. Been using it 6 months and will not look into anything else because there isn’t anything better. No experience with vice

@LuisNapoles

Жыл бұрын

Agreed with this assessment 100%

Used the turbo switch for over 10 years, have only ever broke one thumb out of many drilled. I personally can't use the IT because my thumb is too long and hits the bottom of the slug, where as the turbo has the little opening at the bottom.

@LuisNapoles

Жыл бұрын

Yea that can be an issue with vice!

Please use this angle more. Very in seeing a different angle on the ball’s action. Thanks!

@LuisNapoles

Жыл бұрын

Yea I def will!

I have a ball with a thumb drilled at a zero pitch, which system would you recommend to get a forward pitch, I am dropping my ball on every release, I am a 60yr who listened to a local pro talk me into a lighter ball with a zero pitch for an easier release, I can't use the ball, my concern is plugging it and drilling the thumb in the same spot with the forward pitch will lead to problems down the road. Any advice?

@michaelgarten2188

4 ай бұрын

I had same issue. I went to a different Pro Shop after researching reviews of all in area I was willing to travel and chose well. Very happy as I had a bad time with thumb pitch/size on original drilling.

I like the JoPo's.

@LuisNapoles

8 ай бұрын

Same!

Hey, Luis! I live in Vegas and I'm going on my 2nd year of bowling. Looking to move to interchangeables and want to use JoPo. Can you vouch for any PSOs in this city that are good and can install these? I've been to quite a few and had some disappointing experiences so far. Getting pretty tired of every ball feeling different; it's always something...

@LuisNapoles

Жыл бұрын

Where have you been so far? Send me a message on FB

@matthewstoker224

Жыл бұрын

@@LuisNapoles I don't have a FB, but I'll go ahead and message you from the girlfriend's profile in just a bit. Cheers and thanks. Hell, if you still drill I might even be willing to pay you lol.

I like the jopo thumbs, but mine are hard to twist out by hand which gets frustrating while bowling.

@LuisNapoles

Жыл бұрын

thats a installer issue not a Jopo issue!

@jeffthompson7976

Жыл бұрын

@@LuisNapoles yea.. got it taken care of.. They are great

I had ultimate for years until recently. I started to notice that the ultimates weren't being made the same with each outer sleeve. One would be to tight the next to loose. Inner sleeves would wiggle over time. I recently switched to jopo. I like jopo more. They don't come loose over time and each outer sleeve is the same. Jopo hands down

@LuisNapoles

Жыл бұрын

I never heard of them till this video

in the process of switching to the jopo, I've used the turbo for about five years, and have had six of them break and get lost in the machines. Tired of buying no switch grips. Plus after a short while the turbo begin to get loose and i can feel them move slightly in my swing.

@LuisNapoles

Жыл бұрын

thats why I will never go back!

I have had the Turbo and JoPo. Liked you several of the Turbos broke. The JoPo is the best

@LuisNapoles

Жыл бұрын

Terrible feeling also!

You should try custom thumb system. Pro shop has model of your thumb. The thumb is permanent in the ball

@LuisNapoles

Жыл бұрын

I have used molds in the past but then the problem is what happened when my thumb swells or shrinks and I need to change sizes?

Maybe it's just me, but it looked like you were coming through the Sun Storm with the JoPo the best. Maybe that's just me not paying attention much to how the thumb comes out, but the Sun did look the best

@LuisNapoles

Жыл бұрын

Yea it def felt the best from a FEEL stand point

I had a league team mate who used an interchangeable thumb slug and it always broke around it. He had to have his ball repaired many times

@LuisNapoles

Жыл бұрын

Which system did he use?

@SkateClipsAndTips

Жыл бұрын

@@LuisNapoles Our pro shop is mainly Vice stuff, so I guess it was that one

Theres also ultimate thumb interchangeable and it has nothing at the bottom to worry about

Cool tech bowling luis I might try the jo pro grips innerchangable thumb if my bowling alley village lanes superior carry jo pro grips interchangeable thumb Luis I might use jo pro grips interchangeable thumb on my 2 bowlling balls Brunswick igniter soild 14 pound bowling ball urathane reactive bowling ball and my radical the spy plastic 14 pound bowling ball with dynamic core technology in the bowling ball more strike and spare hitting power at time Luis so yeah

@LuisNapoles

Жыл бұрын

Agreed!

@scottythompson940

Жыл бұрын

@@LuisNapoles yeah

I used a switch grip when I went to a bad proshop. Once I found a good proshop, I haven't needed any grip. The pso said I have an easy thumb to drill.

@LuisNapoles

Жыл бұрын

not as easy as a interchangable thumb LOL

@umbra9273

Жыл бұрын

@LuisNapoles my thumb is just one drill instead of multiple for a consistent fit and it doesn't swell either. Also, since i have to drill my own equipment now, it's been easier to not install one. Saves me money.

All interchangeable slugs should be installed slightly below the surface of the ball. It does not matter what brand a bowler prefers, if the slug comes in contact with the lane, the pins, or the machines they will break. The one issue that is common among interchangeables, the locking mechanism wears out. If the slug does not "click" lock, it is time for new slug components.

@LuisNapoles

7 ай бұрын

Jopo is the way to go IMO

Personally I’ve used ITs and Turbo switch grips. I prefer the Turbos myself but because I live in SoCal now I had to switch from Turbos to ITs because none of the PSOs I frequent supply the Turbos. Please mention that it’s a regional thing. Midwest is heavy EBI and Turbo territory and the West coast is more SBI and Vise.

@sirhc3842

Жыл бұрын

Yes, it's a regional thing, somewhat. I'm in the central valley of NorCal (Vise country) yet there are lots of Turbo pro shops in town. I drive to a shop in Stockton, CA, where Vise is headquartered. The Center owner happens to own Vise. So, the PSO is very knowledgeable about all things Vise, especially ITs.

@LuisNapoles

Жыл бұрын

its not a regional thing I have tried all three of these and these are my results LOL