In this session you will learn - What are different PLANES in AutoCAD 3D - How to Change UCS in AutoCAD 3D - How to Set different View Styles in AutoCAD 3D
Жүктеу.....
Пікірлер: 89
@kurtcampbell2425 Жыл бұрын
Very simple and direct demonstration but you explained it much better than what I was able to obtain elsewhere or try to learn on my own. Than you!
@cyberCADsolutions
Жыл бұрын
Thank you. Please share with your colleagues and friends.
@charlestoneoyoo Жыл бұрын
Thank you very much for this explanation...I had several challenges in understanding planes in 3D. I'm now able to manoeuvre. Many thanks 👏🏾👏🏾🤝🏾
@cyberCADsolutions
Жыл бұрын
Thank you. Please share with your colleagues.
@dipankarroy95944 жыл бұрын
thank you so much for taking a part of your valuable time and made effort to put lessons for others...
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
@mikalshahi4861 Жыл бұрын
thank you so much ! I was stuck for like a good 15 minutes . Very useful and clear tutorial
@cyberCADsolutions
Жыл бұрын
Thank you. Please share.
@ukdave4724 жыл бұрын
Ekdam Guru vala kam kiya aapne. Thank You.
@andrei91152 жыл бұрын
You are such a genious and you explain so well ! God bless you!!
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share to your friends and colleagues.
@melgavin18275 жыл бұрын
Good work, thanks.
@charlestoneoyoo Жыл бұрын
Thank you very muchh....I had problems problems in this and now it's sorted. Be bless🙏🏾🙏🏾✨
@cyberCADsolutions
Жыл бұрын
Thank you. Please share.
@alit85284 жыл бұрын
Thank you. It was helpful
@shivamtalgaonkar71233 жыл бұрын
Cleared the concept of UCS👍
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
@muhammadatifsafdar2 жыл бұрын
Useful, indeed!
@venkireddy77185 жыл бұрын
it is most helpful for me tq
@shumailkhan60783 жыл бұрын
Very informative video with good English skill.
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
@Tamilsongs28135 жыл бұрын
fantastic for me your teaching tnx fr u
@cyberCADsolutions
5 жыл бұрын
kzread.info/dash/bejne/lHaZ0pNul9y6nJM.html
@loveNpeace693 жыл бұрын
Thank you :)
@mamonsin5 жыл бұрын
tenkiu mah gud sir
@kavitarawat62095 жыл бұрын
Thank you so much
@syafrizalamin5317 Жыл бұрын
Thank you very much !
@cyberCADsolutions
Жыл бұрын
Thank you . Please share
@farazhussein286 Жыл бұрын
hello very helpful, please make a video on how to work on the curved surface of a cylinder
@mageshsubbiah35082 жыл бұрын
Your coaching is super.
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share to your friends and colleagues.
@cyberCADsolutions
2 жыл бұрын
AutoLISP Programming in AutoCAD: kzread.info/head/PL-Uk9_AI5M32ZYUArh8ha9Dvujpn1WTUf
@sandeepsandy808003 жыл бұрын
Wow... Thanks.. It was so helpful 😍
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends and colleagues.
@24by793 жыл бұрын
Good And Simple...Thanks
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
@etcdiy42144 жыл бұрын
Thanks brother!!!
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
@parmishadiyani59974 жыл бұрын
very useful, thank you
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
@nelsonochola42903 жыл бұрын
Thank you....her helpful
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
@ramiayyash39044 жыл бұрын
Thank you mate
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
@ravikumarnl83414 жыл бұрын
Sir, make video on different commond uses
@magicalmegha2 жыл бұрын
thank you for the help
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
@itsthelepto2 жыл бұрын
Thank you my guy
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
@d.entertainment334 жыл бұрын
Thank you sir thank you very much
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
@umarumran91195 жыл бұрын
Thank u very much
@prabhudasbitra3697
4 жыл бұрын
Thank you, please share to your friends.
@shoukatali19075 жыл бұрын
thanks sir
@muhammadatifsafdar2 жыл бұрын
Thanks!
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
@EngineerToys4 жыл бұрын
hello sir. when i want to change the ucs direction according to the face,when i select the face it is show no 3d solid or mesh was detected. plz help me out!!
@cyberCADsolutions
4 жыл бұрын
Change view style to 2DWireFrame. Then try again.
@user-gd3tl8zn9g4 жыл бұрын
very good leasson
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
@engadelasssd69316 жыл бұрын
رائع
@abrahamrovansek73843 жыл бұрын
Thank you sir
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
@timed36184 жыл бұрын
Thank you
@cyberCADsolutions
4 жыл бұрын
Thank you, Please share to your friends.
@ghousulhassanbhatti5086 Жыл бұрын
❤
@cyberCADsolutions
Жыл бұрын
Please share
@teghbamm64033 жыл бұрын
amazing
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
@user-qu4mo9bw6d29 күн бұрын
Thanks
@cyberCADsolutions
29 күн бұрын
Thank you. Please subscribe and share.
@digitalcgfarm95696 жыл бұрын
thanks
@anilwaghmode763
6 жыл бұрын
Thank u very much
@cyberCADsolutions
5 жыл бұрын
AutoLisp Video Tutorial kzread.info/dash/bejne/lHaZ0pNul9y6nJM.html
@MRBOBBY87066 жыл бұрын
What if you don't have those red, yellow, and green faces to start with?
@titoslounge1946
5 жыл бұрын
He uses those faces as a reference. If you want to change the ucs like he did, just go to primitives in the 3d modeling ribbon and place a cube. You can change your UCS off of those faces on the cube.
@cyberCADsolutions
5 жыл бұрын
AutoLisp Video Tutorial kzread.info/dash/bejne/lHaZ0pNul9y6nJM.html
@weindians18132 жыл бұрын
Super
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
@evertaxila53113 жыл бұрын
Good
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
@evertaxila5311
3 жыл бұрын
Ok
@user-io8cu9qw8s9 ай бұрын
3d drawing main extrude command use kar kay Jo bad main lines kasay remove kartay hain
@cyberCADsolutions
9 ай бұрын
Use filters
@john-paulcain37814 жыл бұрын
This is pretty useless teaching as we do not start with a 3D cube in order to pick a face, so how do you change the UCS without having a face to pick?
Пікірлер: 89
Very simple and direct demonstration but you explained it much better than what I was able to obtain elsewhere or try to learn on my own. Than you!
@cyberCADsolutions
Жыл бұрын
Thank you. Please share with your colleagues and friends.
Thank you very much for this explanation...I had several challenges in understanding planes in 3D. I'm now able to manoeuvre. Many thanks 👏🏾👏🏾🤝🏾
@cyberCADsolutions
Жыл бұрын
Thank you. Please share with your colleagues.
thank you so much for taking a part of your valuable time and made effort to put lessons for others...
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
thank you so much ! I was stuck for like a good 15 minutes . Very useful and clear tutorial
@cyberCADsolutions
Жыл бұрын
Thank you. Please share.
Ekdam Guru vala kam kiya aapne. Thank You.
You are such a genious and you explain so well ! God bless you!!
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share to your friends and colleagues.
Good work, thanks.
Thank you very muchh....I had problems problems in this and now it's sorted. Be bless🙏🏾🙏🏾✨
@cyberCADsolutions
Жыл бұрын
Thank you. Please share.
Thank you. It was helpful
Cleared the concept of UCS👍
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
Useful, indeed!
it is most helpful for me tq
Very informative video with good English skill.
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
fantastic for me your teaching tnx fr u
@cyberCADsolutions
5 жыл бұрын
kzread.info/dash/bejne/lHaZ0pNul9y6nJM.html
Thank you :)
tenkiu mah gud sir
Thank you so much
Thank you very much !
@cyberCADsolutions
Жыл бұрын
Thank you . Please share
hello very helpful, please make a video on how to work on the curved surface of a cylinder
Your coaching is super.
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share to your friends and colleagues.
@cyberCADsolutions
2 жыл бұрын
AutoLISP Programming in AutoCAD: kzread.info/head/PL-Uk9_AI5M32ZYUArh8ha9Dvujpn1WTUf
Wow... Thanks.. It was so helpful 😍
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends and colleagues.
Good And Simple...Thanks
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
Thanks brother!!!
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
very useful, thank you
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
Thank you....her helpful
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
Thank you mate
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
Sir, make video on different commond uses
thank you for the help
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
Thank you my guy
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
Thank you sir thank you very much
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
Thank u very much
@prabhudasbitra3697
4 жыл бұрын
Thank you, please share to your friends.
thanks sir
Thanks!
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
hello sir. when i want to change the ucs direction according to the face,when i select the face it is show no 3d solid or mesh was detected. plz help me out!!
@cyberCADsolutions
4 жыл бұрын
Change view style to 2DWireFrame. Then try again.
very good leasson
@cyberCADsolutions
4 жыл бұрын
Thank you. Please share to your friends.
رائع
Thank you sir
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
Thank you
@cyberCADsolutions
4 жыл бұрын
Thank you, Please share to your friends.
❤
@cyberCADsolutions
Жыл бұрын
Please share
amazing
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
Thanks
@cyberCADsolutions
29 күн бұрын
Thank you. Please subscribe and share.
thanks
@anilwaghmode763
6 жыл бұрын
Thank u very much
@cyberCADsolutions
5 жыл бұрын
AutoLisp Video Tutorial kzread.info/dash/bejne/lHaZ0pNul9y6nJM.html
What if you don't have those red, yellow, and green faces to start with?
@titoslounge1946
5 жыл бұрын
He uses those faces as a reference. If you want to change the ucs like he did, just go to primitives in the 3d modeling ribbon and place a cube. You can change your UCS off of those faces on the cube.
@cyberCADsolutions
5 жыл бұрын
AutoLisp Video Tutorial kzread.info/dash/bejne/lHaZ0pNul9y6nJM.html
Super
@cyberCADsolutions
2 жыл бұрын
Thank you. Please share.
Good
@cyberCADsolutions
3 жыл бұрын
Thank you. Please share to your friends.
@evertaxila5311
3 жыл бұрын
Ok
3d drawing main extrude command use kar kay Jo bad main lines kasay remove kartay hain
@cyberCADsolutions
9 ай бұрын
Use filters
This is pretty useless teaching as we do not start with a 3D cube in order to pick a face, so how do you change the UCS without having a face to pick?
not good video
@cyberCADsolutions
5 жыл бұрын
kzread.info/dash/bejne/lHaZ0pNul9y6nJM.html
Thanks
@cyberCADsolutions
10 күн бұрын
Thank you. Please subscribe and share