THIS WAS SUCH AN EXCELLENT GUIDE

@CADCAMTutorials

Жыл бұрын

Thank you 😊❤️

English not being your primary language makes your explanations SUPER EASY to understand, English is also my secondary language and all your tutorials are excellent and simple! Thank you very much!

I want to thank you sir from bottom of my heart.... It's because of you today I'm working in design in a Defence Company....

@CADCAMTutorials

5 жыл бұрын

You are welcome

@yashgautam4874

5 жыл бұрын

Where are you working brother

@martinsomers8730

2 жыл бұрын

@@yashgautam4874 In a Defence Company....

@dhanalakshmiramamoorthy4824

Жыл бұрын

Tell name of the company

I have used AutoCAD for more than 2 decades. Nice to see it still going strong.

Explanation is very clearly thank you so much 😊

Such a great tutor 👍 Thank you so much broader 🙌

Good Example for using loft command in solidworks,Thank you

great teaching n skills of autocad ...😍

This is so amazing that how u teach these tutorials in an easy way. ❤️

@CADCAMTutorials

5 жыл бұрын

Thank you

You deserve a medal, thanks.

@CADCAMTutorials

5 жыл бұрын

You are welcome

Sir when i give path the line which is created by loft erases out. May I know why?

Thank you sir, your tutorials are easy and straight to the point! Now I'm a fan of this channel! =)

@CADCAMTutorials

Жыл бұрын

You're welcome 😊

Thank you very much sir, I'm from Indonesia

Great video! Explained really well.

nice explaining sir thanks for supporting poor people like me,. we don't have to pay more amounts for training - i can start learning from your videos

@CADCAMTutorials

3 жыл бұрын

You're welcome 😊

Good & amazing tutorial. Thank you so much!

@CADCAMTutorials

5 жыл бұрын

You are welcome

thank you for this video and its very appreciated to me for easy way

3D Loft command is explained in very simple method.👌👌👍

@CADCAMTutorials

3 жыл бұрын

Thank you 😊. Please subscribe to get new video notificatio.

Muito bom !Bem explicado, excelente exemplo de aplicação , ótima explanação e conclusão.Felicidades a todos .

جزاك الله خير ياخوي شرح سهل وسريع وسلس

How to control the surface density in LOFT command ?

Incredible! You may have saved a project of mine that was defeating me!

@CADCAMTutorials

Жыл бұрын

Glad I could help!

You are best my teacher!

@CADCAMTutorials

5 жыл бұрын

Thank you

Thanx. is there no Twist for Loft?

Thank you very much...

good one my friend

EXCELENT!!!! Thanks a lot.

@CADCAMTutorials

3 жыл бұрын

You're welcome 😊

Raj Sir it reminds me of your class in the very beginning

Perfect explanation and thank u

@CADCAMTutorials

2 жыл бұрын

You're welcome 😊

Very helpful 👍

Why mine doesn't have shadow when I used loft command

Thank you ❤❤❤

Please make more videos in solidworks and catia

can you tell me sir why, I cannot make object like you ,it is showing--" The selected entities are not valid, "

Muito boa aula continua assim Deus t abencoe

@CADCAMTutorials

2 жыл бұрын

Claro, obrigado

Thank you , sir

thanks for the tutorial!!

@CADCAMTutorials

2 жыл бұрын

You're welcome 😊

Pretty clever tool.

when is good, is good!! TK

Superb 👌👌👌

Thank you a lot !!!

@CADCAMTutorials

Жыл бұрын

You are welcome 😊

Bro please make videos about CNC simulation

Very well young man

@CADCAMTutorials

5 жыл бұрын

Thank you.

Yeah sure! It looks so easy when you master are doing it but in practice is much more difficult when it comes to spline! Loft command is maybe the easiest and most straightforward 3d command but when you have to extrude or loft on a path is very difficult when you have to change the XY plane in space. I found the easiest method to be the new ucs, then select x and y axis according to the plan you want to draw into because this way you will have only two axis to look after and dont have to pay attention to the z axis, using left, right, front, back...etc looks much more difficult to me! I am just a beginner in AUTOCAD btw and the extrude/sweep along a path seemed the most difficult thing to me so far! Nevertheless you are a genious! Can I email you a 2d plan building which made my Autocad crash in 2 versions (2017 and 2021) when I tried to press pull the windows? I've tried it on my desktop as well and autocad froze again, the drawing is pretty simple with only 4 rooms, I dont know why Autocad is acting like this. Maybe you can help me figure it out. Thanks alot in advance! Keep up with the good work!!

@haidartaher17

Жыл бұрын

May be it's too late as a response, but I think you to make sure that all the 2d drawing areas are fully closed using boundary command, then make sure that z axis is in extrude direction using ucs command.

good keep going

Thank you 🙏🙏

Good illustration

Excellent thanks 🙂

@CADCAMTutorials

3 жыл бұрын

You're welcome 😊

Perfect. Helpful

@CADCAMTutorials

2 жыл бұрын

Thank you 😊

Thanks to much

I cannot do command LOFT over a path. It appears "Selected entities are not valid." What is wrong?

@NicolaeComan

5 жыл бұрын

Oh, I see! I've forgotten to JOIN the portions of the path.

Bahut khub ❤️

@CADCAMTutorials

Жыл бұрын

Thank you 😊

Ty❤❤❤

Thanks

thank you so much

@CADCAMTutorials

2 жыл бұрын

You're welcome 😊

thanks

wow thank you great tutorial

@CADCAMTutorials

2 жыл бұрын

You're welcome 😊

Gooooood... From Italy

@CADCAMTutorials

3 жыл бұрын

Thank you 😊. Please subscribe to get new video notification.

Tanks

Thankyouuu 😊

@CADCAMTutorials

2 жыл бұрын

You're welcome 😊

Thanks sir 🙏

@CADCAMTutorials

2 жыл бұрын

You're welcome 😊

Good !!

@CADCAMTutorials

6 жыл бұрын

Thank you

5:00 after selecting path it say not valid.. What should i do now

@CADCAMTutorials

3 жыл бұрын

Don't use very complicated path

Good

great video

@CADCAMTutorials

2 жыл бұрын

Thank you 😊

I SOMEHOW FAILED ON THE SHELL COMMAND. BUT I HOPE FOR THE BEST AS I PRACTICE MORE

Ору с этого акцента. Индусы - топ!

Which windows version are you using?

@CADCAMTutorials

4 жыл бұрын

Windows 7

Hi, How do you join or unite 3D array with 3D solid object?

@CADCAMTutorials

4 жыл бұрын

Use UNION command

@habibacil7716

4 жыл бұрын

@@CADCAMTutorials does not work, I tried union, join but nothing. it says "at 2 solids, surfaces, coplanar regions must be selected"

@CADCAMTutorials

4 жыл бұрын

Explode 3D array and Union

@habibacil7716

4 жыл бұрын

@@CADCAMTutorials sorry to bother you but still it does not work. is there any other way?

How to Find These Volumes???

path and guides doesnt work for me. btw im using 2012 version

@CADCAMTutorials

2 жыл бұрын

Try to create less complicated path and smaller section.

eccellente

@CADCAMTutorials

6 жыл бұрын

+Squaletto blu Thank you

sir esme jo rectangular lofted part h uska devlopment kese bnega

@CADCAMTutorials

3 жыл бұрын

Uskeliye aap ko solidworks ya phir dusara 3D software use karna padega kzread.info/dash/bejne/c5qkuraNmZO4Z7g.html

@sahilchhapola1125

3 жыл бұрын

@@CADCAMTutorials sir two step lofted and only rectangular shape not circle

Wow

@CADCAMTutorials

6 жыл бұрын

Thank you

As the rest of the world is using parametric software

Can you l Teach me AutoCAD ?

ГОСПОДИ ХРАНИ ИНДУСОВ

CONTOLL

Thanks

Thanks

@CADCAMTutorials

6 жыл бұрын

You are welcome