Learn AutoCAD in a step-by-step way with more than 26 video lessons with quizzes and practice exercises for free here sourcecad.com/courses/autocad-essentials-course/

@jaydenlayton4577

2 жыл бұрын

instablaster...

Your accent is just fine, don't worry about the people who say otherwise. Keep up the good work.

@sourcecad

9 жыл бұрын

William Schlanger Thanks William for your appreciation :)

Great video!! Thanks

Thank you very much.Your expression is very good.l understood very good. Oktay Tekin in İstanbul

Nice explanation dear sir And also this is a good work to provide trainings to other whose not able to trainings centre and lack of time.

good explanation.. thanks a lot

that was genius way to draw that curve, as you have perfect controcl over geometry of the curve evnthough it takes little more time to draw. thanks for idea and uploading this nice video.

@sourcecad

9 жыл бұрын

123kkambiz Thanks again for your encouraging comment friend

Excellent video, thank you.

@sourcecad

9 жыл бұрын

Jake Collins Welcome Jake :)

thanks for the video,s ....

very helpful

Best for NEW USER

Whenever i try to draw it there's some space inbetween the fin & the cylinder when seen from behind how can i prevent it from happening

it was very useful for me. thanks

@sourcecad

9 жыл бұрын

Azam Bakhtiari I am glad it helped you, keep watching for more :)

nice job

JUST WANT TO KNOW.... STH. I USE AUTOCAD 2019 AND I CANT CREATE THE SURFACE NETWORK THING. ANY REASON WHY?

Thanks a lot .

@sourcecad

9 жыл бұрын

hany daoud Welcome hany :)

Very nice explan

Nice video

nice job i like it

@sourcecad

8 жыл бұрын

Thanks Farman

merci beaucoup

Great video! Thank you for making them, I'm learning a lot from your teaching! Do you make money off of CADD or do you work with it for fun?

@sourcecad

8 жыл бұрын

Thanks Justin

If it was even a chance to see the product in motion,how its behave and working with other components..

Nice explan

autocad 2007 not used networking command....how to use another command

There is no Surface tab in my version Autocad 2010,so I was unable to complete the surface part .where could I find it or any command for surfacing those kind of objects.

@sourcecad

8 жыл бұрын

+ABDUL JAFAR Are you using AutoCAD LT? AutoCAD LT has limited capabilities and its probably the reason you are unable to see 3D ribbon. Moreover if you have full version AutoCAD then you can turn on 3D tabs by right clicking in empty space of ribbon and selecting the required ribbon from contextual menu.

can i make small money with this basic methods that will be helpfull if there is any website tell me

muy buena el tutorial espero q lo hagas en espanish

@sourcecad

8 жыл бұрын

Gracias Angel

for this impeller the big plat eshould also be deleted .. the flow should be axial without any obstacle .. thank you

Once the fins have been turned into a polar array how do you get them to connect with the base and cylinder using the 'union' command. Mine wont work.

@sourcecad

9 жыл бұрын

klrhc2 It might be due to associative array, select fin after making an array and write X in command line and press enter. then try to make union let me know if you still have problems

@klrhc2

9 жыл бұрын

It worked!!!!! Thank you very much!!!!!!

@sourcecad

9 жыл бұрын

Welcome :)

@lucgondim

9 жыл бұрын

SourceCAD Thank you very much! I had the same problem, I couldn't union the array with the base and cylinder. Just selecting fins and them command x (explode), the union finally worked!

@sourcecad

9 жыл бұрын

I am glad it worked :)

thanks.

@sourcecad

9 жыл бұрын

nirav panchal Welcome Nirav

very will

When I try to do the lines at 5:15 , it forces me to connect the horizontal lines to the endpoint of the vertical line. How do I unlock it so I can put the lines wherever I want? I have Node 'on' in the OSNAP menu by the way.

@sourcecad

9 жыл бұрын

Lucas B you can turn off OSNAP temporarily by pressing f3 to avoid snapping at unwanted points moreover you can also select a command then press SHIFT+RIGHT CLICK a contextual menu will appear select point which you want to snap and only those points will be activated for snapping.

@supafly208

9 жыл бұрын

SourceCAD great. Thanks!

@sourcecad

9 жыл бұрын

Welcome Supafly :)

Nice

thanks...

@sourcecad

9 жыл бұрын

you're welcome :)

I did all this steps but when I started to make union it doesn't work , how I fix this knowing that I turn on OSNAP !what's the problem

good

give me autocad suggestions

not able to create network. Can annybody help make me out of that?

good job , i guess now inventor is much better than autocad for mechanical drawings and much easier

@sourcecad

9 жыл бұрын

Ahmad Muammar yes inventor is definitely better at modelling mechanical designs but AutoCAD still holds its monopoly in 2d drafting :)

whats the difference between pull option and extrude option??

@sourcecad

9 жыл бұрын

prudhvi sriramula as far as AutoCAD is concerned there is no PULL option although PRESSPULL option is present and if you want to know difference between them I suggest you to go to this video kzread.info/dash/bejne/p52KuNqQo622hrA.html

@prudhu007

9 жыл бұрын

yeah, its presspull and thanks for the explanation in the video dat was so clear and easy to understand.. and all of your videos are very usefull and easy to pratice by own.. a suggection by my side is make sure there is no noise in your videos. thanks once again.

@sourcecad

9 жыл бұрын

prudhvi sriramula I am glad that it helped Prudhvi, And thanks for your suggestion my old videos are a bit noisy but all my new videos have clear voice quality.

for some reason I cant get my " union" to work

@sourcecad

9 жыл бұрын

***** for applying union you need to first use THICKEN command on fins and set some thickness to it and also make sure that central cylinder mates (intersects) with fins. If both the methods fail try this select array of fins and press X then enter then try to UNION (associative array objects cant union this might be the case)

how to make network in autocad 2008??? i'm stucked!

@sourcecad

9 жыл бұрын

Annisa Maharani I am really sorry Annisa but I never used AutoCAD 2008 my first software was 2010 I might not be able to answer this but you can always check AutoCAD forums for quick answers from users of older AutoCAD versions.

no puedo unir el impulsor con la base y me dice "hay que designar al menos 2 sólidos" help me!

@sourcecad

7 жыл бұрын

Explode the array which you have made by selecting all fins and then type X and press enter. Then try using Union command again.

@jtdangster

7 жыл бұрын

I had the same problem, Explode the array which you have made by selecting all fins and then type X and press enter. Erase all the base and create a new base ( same radius 20, extrude -2) then union command for all. I don't know why, but it works... =)

@SAEKI571

7 жыл бұрын

Rafael Dang i will try this men!

WHICH AUTO CAD VERSION ? 2014? OR WHAT

@sourcecad

9 жыл бұрын

hany daoud It is AutoCAD 2013

Dear sir thanks for this video .sir can tell me water pump impeller how to draw in 3d

@sourcecad

10 жыл бұрын

welcome Naveed, I will upload water pump impeller video in my coming tutorials... keep learning

@naveedakhtar6745

10 жыл бұрын

Thank you very much

@saphiagandarosa9523

10 жыл бұрын

SourceCAD

@sourcecad

10 жыл бұрын

naveed akhtar watch this video it is lot similar to water pump impeller Autocad tutorial CPU Fan complete 3D: Sourcecad hope it helps :)

@naveedakhtar6745

10 жыл бұрын

Thanks

Accent is fine. Sound volume is totally missing.

Hi. I need help. I am still learning autocad. I was hoping someone could help me about making a an object. The object is tube and around the tube there are small holes.. The diameter of the tube is atleast 25mm and the height is 65mm and the small wholes around it is 2.5mm.. The space of the whole is 4mm. Maybe anyone could make toturial video.. Thank you.

Very good. The noise is annoying, but otherwise, the content is good.

@sourcecad

9 жыл бұрын

thanks for your intrest, it is one of my oldest videos in all my new videos sound quality is crisp and clear.

@1495978707

9 жыл бұрын

Wonderful!

hi

@sourcecad

8 жыл бұрын

Yes irsnam, How can I help you?

English?

@sourcecad

9 жыл бұрын

Luciano Junqueira Sorry could not understand?

nice job