This is a 1 on the 1-10 scale for difficulty. Are you going to try this? Comment below:

@rkingy2766

2 жыл бұрын

Tried, can't seem to retrieve the removed pieces thou.

@chevrolet69

Жыл бұрын

have the Scout Rogue. Mine is 30cm inside. What I can do?

@RemboUSMC

Жыл бұрын

@@chevrolet69 I am not sure about the rogue

@chevrolet69

Жыл бұрын

@@RemboUSMC Okay thanks brother. I will look to do something handmade to that depth. example, 30cm drill bit of 6 and leave it as a strainer. The Few, The Proud 👍

@keithgillum3414

Жыл бұрын

Did this years ago on a Honda Shawdow - worked like a champ. Going to do it this weekend to my wife's Scout Sixty.

I can absolutely 100% tell you that this mod not only works but it makes the note perfect. Nice and thumpy at idle, just loud enough to hear the engine while riding, it's perfect. A+

@RemboUSMC

2 жыл бұрын

Good to hear. There have been a lot of whiners about this. mod.

@Twisted86

Жыл бұрын

@@RemboUSMC Curious if you made any videos of it on the road/high rev before you totaled it? I'm going to try this, have a set of slipon if I don't like it lol.

@RemboUSMC

Жыл бұрын

@@Twisted86 I did not unfortunately.

@Twisted86

Жыл бұрын

@@RemboUSMC No problem, I did it tonight on my scouty sixty and THANK YOU. Sounds like a motorcycle now and saved me $400. Downside is I have to wait before I hammer it in the mornings now, girlfriend is going to kill me if I do lol.

Killed me with the ...” hmmmmmmmmm” ! 😂 great vid!

@RemboUSMC

3 жыл бұрын

Thank you Sir.

@Mafresita

3 жыл бұрын

lmaoo me tooo lol

@carlosaldana4678

2 жыл бұрын

Hahahha same here

@Zetrokarev

2 жыл бұрын

Im dying lol

@Anonymous.soul.444

Жыл бұрын

Got funnier with each hmmmmmm?? 😂

Man thanks for the advise. I just got a 2022 scout rogue and I couldn’t hear my bike while riding with other people. It sounds great now!!

I did the same thing. This did not change the performance or gas mileage. This made it a tad louder but much deeper sound. Now you can hear the rumble when cruising. Very easy to do.

I chose to run shorty straight pipes. And I love it. No other bike sounds like these straight piped.

@electricuniverse5186

2 жыл бұрын

Does running on straight pipes change the back pressure on the engine?

Just did this to mine. Sounds much better and deeper. Thanks Rembo. FYI if the bike is 2020 model like mine, the diameter is 1 Inch (25 mm) , not 1 1/4 (32 mm) like Rembo's...

Thanks for this , I’m going to try it on my scout rogue tomorrow! Indian were trying to up sell me a Vance and Hines but I find them too loud but this has that perfect hum and rumble !!

I did the same to my 2021 Indian scout abs. Sounds great. Awesome thanks

@ejasonsims

2 жыл бұрын

Was it the 1 1/4 hole saw for your 2021

@RemboUSMC

2 жыл бұрын

Right on!

@RemboUSMC

2 жыл бұрын

2020

I had done this with my '21 scout..sounds great! Only issue i had was the hole saw came loose from the extension and got stuck in the pipe. After about 30 minutes of fishing for it with a flexible 24" mechanical pickup tool I finally pulled to saw out and then the cut baffle 🤣

@RemboUSMC

2 жыл бұрын

That’s some bad luck. Ouch!

that is a very pleasant / lumpy exhaust sound!

Hmmmm? I like the video your bike sounds perfect!!! Nice rumble deep tones but not driving neighbors insane! Exactly the sound I want on my Bobber ty sir!

@RemboUSMC

Жыл бұрын

Glad you enjoyed!

I have a scout bobber too and next to my husbands dark horse mine sounds like a dang sewing machine 😂 lol I’ve been researching options to give it some edge since it looks so cool 😎 but sounds lame stock. 😅 I love it though, I’m a new rider and it’s my first bike so I’ll always love it. I did upgrade the seat right away. 😌 thanks for making the video, I’ll share the idea to see if it’s an option for me. 👍🏻

Ordered my Scout Bobber 20 a few weeks ago. Can’t wait to get it in. May have to try this since I live in California and none of the exhausts I want will ship here.

@RemboUSMC

3 жыл бұрын

You will love your new Indian.

@marshallr4013

3 жыл бұрын

Is Haul bikes shipping it?!?! My scouts coming from states away.. many sleepless nights waiting for it 😔 lol

man that sounds great only thing left to do is lower the idle about 100 rpm and you're solid

I bought the freedom 2-1 combat for my 2021.... but there are no tunes for it yet or at least that what dynojet told me so I can’t install them on yet. So this helps for now.

The main reason I changed to my Mavrick Crusher slip ons was to get rid of the long ugly stock mufflers. Making it loud as hell was a side benefit.

@RemboUSMC

3 жыл бұрын

The length is a serious downer. I don't know why they wanted such long slip-ons on this bike.

What happens if you take out both does it get even louder I would imagine so has anybody done it?

The newer or international models seems to have only one baffle and way futher in the exhaust (12 inches)

Yer mate just found your vid today.. i did the same thing 3 days ago and it sounds sweet.. I've got a brand spanky 2020 and my baffles were in 305mm. Its hard to tell but i think mine maybe a touch louder.. keep up the good work.. cheers Nick from oz land. 👍

@RemboUSMC

3 жыл бұрын

305mm? Did you drill 32mm?

@2601zpnh

3 жыл бұрын

@@RemboUSMC not sure exactly. Used the biggest that fitted.. should keep the roos away. 👍

@2601zpnh

3 жыл бұрын

@@RemboUSMC also Im running standard rear shocks and i 3 full turns down on the preload so im not picking up the rubber stopper with my spine any more and lowered tyre pressure to 38 psi to smooth the ride out.. works well...

Thanks. I'll do that once the manufacturer warranty ends.

Will that work on a 2022 Chief Bobber also?

Wondering if this works on the scout rogue sixty

Hey Rembo I was one of the Marine Corps few good men! A Navy Corpsman, haha! Just messing with ya! Anyhow I just bought a 2021 Indian Scout Bobber and Wish I would have seen this prior to giving up my 💰 for Reinhart Slip Ons!

@RemboUSMC

3 жыл бұрын

We always loved our Corpsmen and treated them like family.

Hello, what's the size of the tool socket? Scarwood's driving unit has too little engine sound, so my presence is up.

@RemboUSMC

Жыл бұрын

I don't remember. That was a long time ago. Measure it and buy what fits.

Thank you for a very entertaining and informative video. I called my Indian dealership. To ask them if removing the baffles off the exhaust pipes can void my warranty. The service manager said that it will void the warranty. So maybe I will wait.

@RemboUSMC

Жыл бұрын

I don't agree with the service manager.

How come I laughed my ass off with every "hmmmmmmm" ? 🤣🤣

Handmo Shorty GP Slip On Exhaust for 2015-2021 Indian Scout Sixty Bobber, Heat Resistant Black Finish do they have a baffle in them?

@RemboUSMC

2 жыл бұрын

I believe they all come with a baffle

Freedom performance combat 2 in 1 is the way to go. Loud pipes save lives!

@liljfunk21

10 ай бұрын

Got the 2 in 1 with the quiet baffle

@cautiontext

10 ай бұрын

@liljfunk21 how much of a difference does the baffling sound?

@liljfunk21

10 ай бұрын

@@cautiontext to me it’s not as throaty and less of a headache on longer rides

But they still look like massive potato cannons. I went with the V&H Slashcuts, and yes, they were harsh. I added the quiet baffles and I am very pleased.

@backwoodsfreak

2 жыл бұрын

And they weigh more than my ass does. Lol!

Personally quite frankly I'll stick with my Crusher exhaust. And if anybody needs some stock exhaust pipes for an Indian Scout I have some

Would it be easier to remove the pipes and drill upside down so the piece can fall out if you do t have a magnet?

@RemboUSMC

Жыл бұрын

Not in my opinion but it is another method

Thanks for this. Could you maybe record a fly-by type of video ? To hear what it sounds like from a sidewalk. Cheers

@RemboUSMC

3 жыл бұрын

Too late, if you look at one of my videos, the bike was totalled on January 31st when I was hit head on by a car. It was their fault. I'm OK.

@shark2075

3 жыл бұрын

@@RemboUSMC oh crap.. I'm sorry for that mate, thanks for replying anyway. Hope you have a good one and stay safe

Isn't this basically the same mod as punching a hole with a rebar? One of the oldest exhaust modifications out there? The baffle itself is still in the bike but you just open a bigger hole for more bass.

@mattwuk

7 ай бұрын

Yes

Sir what do you mean by repeat? Do you mean the second baffle? Or repeat the same to the bottom pipe?

@RemboUSMC

Жыл бұрын

Each slip-on

Quality !!

What happens if you cut the 2nd set? Would it be too loud?

@bobbocee9139

Жыл бұрын

That is what I am trying to figure out. Let me know. I want it louder but no power loss.

Thanks for the info, too quite for me

@RemboUSMC

3 жыл бұрын

I understand

Great video. I have a ‘20 Bobber w the factory 2 into 1 w intake upgrade and tune. My nephew has a ‘21 Scoutw the OEM dual exhaust - stock. He is doing the baffle mod today. We are in Miami and have Cardo Packtalk slim comm systems. Let me know if you ever want to connect for a group ride down south. Richard H.

@RemboUSMC

Жыл бұрын

Sounds great!

What year is this Scout Bobber and what Bags do you have on it ? I've got a 2019 and finding it hard to find bags for the Short Fender. Thanks 👍

@RemboUSMC

2 жыл бұрын

It was a 2020 and the stock Indian bag.

@reyvalenzuela2479

4 ай бұрын

You can get one at Viking bags

hello this is an amazing idea. might i ask. would you be expecting any techincal issues with this method?

@RemboUSMC

Жыл бұрын

I had no problems. It is just a slipon, not a full exhaust.

@nicpap3664

Жыл бұрын

@@RemboUSMC excuse my ignorance but by slipon you mean just a kind of slight modification that would not be worth of doing anything else? thanks

What happens if you can’t get out one of the pieces that you drilled

@RemboUSMC

2 жыл бұрын

It will eventually blow out

Any chance you could grab a decibel reading on this mod? Sounds great on camera but hopefully not too loud!

@RemboUSMC

6 ай бұрын

Probably not. The bike was totaled when I was hit head on by a car.

@Booki89

6 ай бұрын

@@RemboUSMC Oh Shit!! Thats horrible! Glad you are still putting out videos though :)

@RemboUSMC

6 ай бұрын

Yes but with Ducati @@Booki89

Would this mess up anything on my bike? I just got it and haven’t given it’s first 500 mile service yet. Should I wait?

@RemboUSMC

2 жыл бұрын

Depends on your dealer. Wait until after the first service to do it

So how do u properly turn off a scout? My battery keeps clunking out.

@bentebbens

Жыл бұрын

I certainly don't mean to be smart but I'm guessing, to check the manual. If your doing as it states, then I'd think the "Stator," which charges the battery of possibly the rectifier is bad. Google how to check the stator, usually pretty easy on a Honda Shadow anyway. Hope you the best!

@tun-tunninc.6492

Жыл бұрын

@@bentebbens thanks. After a full year I figured out the gist of it. My first motorcycle. 🤘😎

Can you screw the inner baffle out then modify???

@RemboUSMC

Жыл бұрын

Not that I know

Love it, but how I can’t stand those Torpedo looking stock exhausts lol, and how they weigh about 13 pounds each from what I’m hearing. Waiting for my 2021 jade smoke scout bobber to come in, I ordered it a week ago. Already have my new exhaust sitting in a box. Cant wait!

@RemboUSMC

3 жыл бұрын

Congrats! Enjoy when you get it.

@crazyweirdperson

3 жыл бұрын

@@RemboUSMC thanks! Trying to wait Patiently.

I don't own an Indian, yet. Watched because it's funny.

@RemboUSMC

3 жыл бұрын

I hope you get one soon. They are awesome!

Hi.. Is this the stock wheel, if so what size tyre is on it? Thank you

@RemboUSMC

Жыл бұрын

I don't remember. I was hit head on and the bike was totaled about 2 years ago.

@1cavtat

Жыл бұрын

🥴 sorry to hear it

Will this work on the super chief?

@RemboUSMC

Жыл бұрын

I have no idea because I do not have the super chief.

What size rear tire you running? Looks chonky

@RemboUSMC

Жыл бұрын

I don’t remember. I was hit head on with that bike and it was totaled. I do know that I changed over to Michelin from the stock tires that didn’t last very long at all and I was very happy with the Michelin

Did you try to take those screws out and remove the whole entire baffle before you drilled it out.?

@RemboUSMC

3 жыл бұрын

That cap is for aesthetics only and does not open up the muffler. It is just a simple cap.

Can i have those VH slashcut's im broke!

@RemboUSMC

3 жыл бұрын

Sent back to Revzilla already.

Wow Did you do two pipes? As far as I know, each pipes have two BAFFLE Did you do total four BAFFLE?

@RemboUSMC

Жыл бұрын

One in both pipes

For some reason, I had to pause this and go make some coleslaw.

@RemboUSMC

Жыл бұрын

LOL

will this invalidate my warranty?

@RemboUSMC

3 жыл бұрын

My dealer told me no,

So, does it void warranty?

@RemboUSMC

Жыл бұрын

No

Damn your rear tire is getting a little bald there buddy😂

@RemboUSMC

3 жыл бұрын

Yep, already replaced with new Michelin Commander III's

@paint4850

3 жыл бұрын

@@RemboUSMC Good choice lol. Nice riding🤙🏼

This is now the hmm Channel to me

@RemboUSMC

Жыл бұрын

Intriguing

Why not remove the draws an pull out all the guts?

@RemboUSMC

Жыл бұрын

Tooooo loud

You said you were on hwy 95. Are you in florida?

@RemboUSMC

2 жыл бұрын

Yes

@ks-db5cm

2 жыл бұрын

Close to cocoa?

@ks-db5cm

2 жыл бұрын

I installed Vance and Hines slash yesterday. Sound very nice

Couldn't watch this after the 3rd "Hmmmm" fml

Did you lose any power?

@RemboUSMC

Жыл бұрын

Not at all

Did you just take out one

@RemboUSMC

2 жыл бұрын

Both mufflers were drilled out.

@BB-1990

2 жыл бұрын

@@RemboUSMC There is 2 baffles in each pipe. You can take out another in each, 4 total.

Hmmmm?

Hmmmmmm

Lolll just slap on gp shorties. Best imo 😊

@oyyrav

Жыл бұрын

Yea definitely 💯

hey man nice one but you forgot something really important: you drilled into an exhaust pipe which creates metal dust that can travel back to the engine and cause lots of problems for you and the people who are copying you. I know you made a disclaimer but you should at least disclaim that too, correct thing is to remove the whole thing and vacuum any residual metal.

@RemboUSMC

Жыл бұрын

Good point. The pipe blows out so when you start it, everything comes out. This is not an intake, at which point, would be critical to clean.

@nathanmiller344

5 ай бұрын

Wait, wait, wait, you got the rare reverse indian with the exhaust sucking and the intake blowing.😅 Tell me you think it's front wheel drive too.

@davidbrannan987

3 ай бұрын

@@nathanmiller344 this guy doesn’t know his ass from a hole in the ground

Coleslaw 😂

@RemboUSMC

Жыл бұрын

I actually had some excellent vinegar pepper coleslaw yesterday.

Imagine buying a motorcycle and its "too loud"

@RemboUSMC

3 ай бұрын

Yes, it happens. Sometimes it is just completely annoying to listen to.

@justincolon8793

3 ай бұрын

@@RemboUSMC they'll you'll hate the 2025s boasting a 1250

Would do, if it wasn’t illegal in germany 🤷‍♂️

@marshallr4013

3 жыл бұрын

Think it’s illegal in the states. At least where I live from what I heard.. hopefully not 🙄

Nah I want even more permanent hearing damage so twin slash it is

If your slip-ons are too loud you're too old I love my Vance & Hines Mavericks on my Indian Scout

@RemboUSMC

2 жыл бұрын

Enjoy! This is the bad part about old age.. LOL.

@snowmanrainmaker

2 жыл бұрын

@@RemboUSMC I'm 60 now, around my neighborhood people are blind so I need them so they can hear me.

I don't understand why some people wants loud sounds on their bikes. I prefer a relaxing ride without exhaust noise

@Gambitleague

Жыл бұрын

It's a safety feature. You want people to hear you on the road.

@mikelmc2509

Жыл бұрын

@@Gambitleague not agree at all, seems like it's more to be a bad boy

@crossefire01

Жыл бұрын

@@mikelmc2509 It matters. You might not see me when you're looking down at your phone but you will hear me as long as you aren't deaf. It makes a difference fairly often. If I wanted to play the bad boy role, I'd use the V&H Slash Cuts. Those things are loud enough to sterilize your neighborhood.

Hmmm 😂

@RemboUSMC

3 жыл бұрын

Pretty sketchy huh? LOL

Complaining about too loud! Hmm🤔

If you just remove the end cap with a torx key then bore out a couple of the baffles. The end result improved the sound but it still handled like the p.o.s, it is. Back to the GS for me.

WHO GIVES a **** about the neighbors

@RemboUSMC

11 ай бұрын

I do.

The result was very underwhelming

@RemboUSMC

Жыл бұрын

You had to be there

Unkind! Always lube before insertion and drilling.

@RemboUSMC

2 жыл бұрын

Lol

@westerncivilization

2 жыл бұрын

@@RemboUSMC either way, she'll make noise something fierce

Too large pipes!!!! Just ugly

@RemboUSMC

3 жыл бұрын

I agree but now that the bike is totaled I can start fresh.

@Countolaf03

3 жыл бұрын

@@RemboUSMC what happened to it?

@Dooomsdaygaming

2 жыл бұрын

@@RemboUSMC glad you’re okay

@RemboUSMC

2 жыл бұрын

@@Dooomsdaygaming Thank you

Just buy rsd track slip ons. Best sound for this bike and screw the neighbors

@RemboUSMC

2 жыл бұрын

This bike since has been completely totaled after someone hit my head on

yes. sounds like shit....

@RemboUSMC

Жыл бұрын

And now it doesn’t sound like anything because I was hit head on in the bike was totaled

Nah, still don't like that sound. I mounted a Miller slip ons, I think is a good compromise between a good and not deafening sound. I'd really like mount the Bassani tho...but I think my ears won't handle them

Just take both end caps OFF pull both Baffles out Remove Fibreglass wrapping around both Baffles Re Install. Win / win

@RemboUSMC

3 жыл бұрын

The caps are for looks, the baffles are not accessible which is why people buy slip ons.

@omegachar4754

3 жыл бұрын

When you take the caps off you'll find out Indian has welded the whole thing shut. There is no way to access the inside of the stock mufflers short of cutting them open.

@karlmittmann6657

2 жыл бұрын

@@omegachar4754 Can’t agree, as I accessed my Stage 1 pipes and removed fibreglass wrapping as I explained. My Scout is a 2015 Build so maybe Indian welded at later productions ?

@omegachar4754

2 жыл бұрын

@@karlmittmann6657 I think you're confused. We're talking about the stock pipes being welded shut, not the stage 1 pipes which you're talking about. I also have a set of stage 1 pipes and they can have the caps and internals taken off and out by removing screws. Long story short: stock pipes are welded shut, stage 1 pipes are not.