Indian Scout Mod 2 Vance and Hines Slip-ons Exhaust Mod 2 (Install)
Автокөліктер мен көлік құралдары
Finally got my Vance and Hines Twin Slash cut. This thing is loud. After replacing the stock exhaust, I am really excited and satisfied with this modification. The hardest or longest part was the removal on the old ones.
www.revzilla.com/motorcycle/v...
www.indianmotorcycle.com/en-u...
Пікірлер: 113
I just bought the same bike (mines a 2020) and it came with these pipes. When they started it up at the dealer. I fell in love. I’ve ridden a scout bobber before on a demo day. I remember how the stock sounded now that you showed us. It reminds me of my Victory when it was stock. The V&H sounds awesome in person. Video doesn’t do justice.
@apexofrandomvidz
Жыл бұрын
Its not factory like that is it? I believe they modified it and sold it like that. Either way, yes the original sounds like the Jetsons. Thanks for watching, ride safe.
@pepewujek4072
Жыл бұрын
@@apexofrandomvidz not factory. Kid put the V&H on. Only put 2k on the bike. I guess it wasn’t for him. Ride safe too brother!
Loud pipes are MUCH safer than quiet pipes.. If a car cannot see you, you can make them listen!
@apexofrandomvidz
2 жыл бұрын
Agreed! Thanks for watching.
@kevinberdine
Жыл бұрын
I agree 100%
They sound really good i have just ordered some thank you for a great video
@apexofrandomvidz
2 жыл бұрын
Thank You for watching, glad my video was of some help.
She sounds awesome. Ride safe but ride!!
very nice bike man, great sound and great install video, thankyou. I have a 100th Anniversary Scout with the Indian shortys and stage 1 kit, but even though they're an improvement on the sound and look from stock, i still want a better look and sound. I also have a loose inner pipe rattle on the bottom pipe that annoys the bejesus out of me and no idea how to fix, so my philosophy is to eradicate and replace the problem with a better look and sound..... as one does! The V&H slashcuts tick the boxes.
@apexofrandomvidz
2 жыл бұрын
Are you able to claim the Shortys on warranty? What aftermarket company is the air breather for the stage 1? That's my next project but obviously haven't gotten to it.
@darkcustomxxx7252
2 жыл бұрын
@@apexofrandomvidz It's a genuine Indian stage 1 kit airbox and filter. Ive fixed the rattling silencer with high heat JB weld chaulked into the face plate at the end of the pipe, It's cemented the silencer pipe and face plate into the silencer body solidly and no more rattle whatsoever. subsequent heat and carbon has now coloured the repair to be unnoticeable. The perfect crime!! Due to numerous covid border lockdowns in Australia and the fact i purchased the bike over the border in Queensland restricted me from taking it back to the dealer for most of the year. That's why i fixed it myself. I have also found out that the weird configuration anti tamper Torx screws on the silencers are Indian's own kind and are not serviceable. In other words, the solution is replacement silencers. So anyone out there trying to remove/modify baffles or fettling with Indian silencers, you can't! Pretty sneaky and I did let Indian know i wasn't happy about that. Cheers.
The Jetson’s, it does!
@apexofrandomvidz
3 жыл бұрын
It's a funny sound
@noahcooley69
Жыл бұрын
I said the same thing. Thought something was wrong with mine at first
Beatiful change....good sound.. tanks from mexico
@apexofrandomvidz
Жыл бұрын
Yes, to this day the sound is really good. Thanks for watching.
Sounds awsome!! Good job! The smoke is just burning out the coating..from the factory...its will go after a few rides...nothing to worry about.
@apexofrandomvidz
6 ай бұрын
Yeah, a few viewers told me that. It's still sounding amazing.
Nice man!!! love it!! sounds bad ass...
@apexofrandomvidz
2 жыл бұрын
Thanks for the feedback. LED headlight replacement coming soon
Great vidéo, have a safe ride
@apexofrandomvidz
2 жыл бұрын
Thanks, you too!
Ugh!! Gorgeous. I want to get one now.
@apexofrandomvidz
2 жыл бұрын
What are you waiting for!!! I new Chief bobber is an amazing machine. Thanks for watching.
@tun-tunninc.6492
2 жыл бұрын
@@apexofrandomvidz yeah, the length of the pipes and sound really compliments ur bike.
@tun-tunninc.6492
2 жыл бұрын
Update: I got my vance and hines!!! Install today. 😎🤓🧐
Great video
@apexofrandomvidz
2 жыл бұрын
Thanks for watching. I also have the third mod, which is a new LED headlight. Feel free to watch it.
Hey amazing video. I tried looking this up on and i have 2021 scout bobber sixty. The website asked me to put motorcycle details and then it said it won’t fit my bike. Can you tell me if it would fit on my bike or what’s the alternative in that case?
@apexofrandomvidz
3 жыл бұрын
Thank You for watching. I looked up on revzilla, and for a 2021 does fit. Hope the link takes you straight to the page. If not, got to parts, exhasut/slip ons. www.revzilla.com/parts/2021-indian-scout-bobber-sixty?view_all=&page=1&limit=96&facets%5B%5D=944&price_min=169&price_max=675&is_new=false&is_sale=false&is_made_in_usa=false&is_holiday=false&is_blemished=false&ships_two_day=false&sort=featured&fit=
@dariusprinceton5302
2 жыл бұрын
Instablaster.
awesome video, since putting it on, cause i know hearing it in person and hearing it over a video is different. have you received any noise complaints about it? noticed you were in a neighborhood, and i want to make mine louder. but hesitant cause of the type of neighborhood im in!
@apexofrandomvidz
2 жыл бұрын
I have not received any complaints. But of course I am not letting the bike sit for long or reving it just for the noise. My main road is close enough for me to make a turn out of my neighbors path. I believe this is loud enough, I've gotten positive feedback when I'm out and about cruising. Thanks for watching.
Which website did u order the exhaust from and the model please?thank U
@apexofrandomvidz
3 жыл бұрын
Thanks for watching, and what a coincidence, I was thinking about putting the link on the description after watching other videos. (Still new to this). Here is the link. However, the price did go up. www.revzilla.com/motorcycle/vance-hines-3-round-twin-slash-slip-on-mufflers-for-indian-scout-2015-2018?sku_id=1248613
Any problems with a leak using the Vance and Hines clamps?
@apexofrandomvidz
4 ай бұрын
Since the install, I haven't had a single issue. Thank you for watching.
I got mine off in 2 mins. Didn't separate them, took both out together. Took 5 mins to put the Hines on.
@apexofrandomvidz
6 ай бұрын
Show us the way, Grandmaster
Where did you get that tank bag from?
@apexofrandomvidz
3 жыл бұрын
Thanks for watching. It actually came with the bike. I bought the bike off a personal seller. However looking at the bag, I believe it is an Indian product. Here is a link but it's aftermarket. www.compacc.com/oemcatalogs/p/all/indian_accessories-bags_luggage_racks-bags_luggage/5714e79487a86611c08c94d3/genuine-leather-tank-pouch-with-clear-pocket
Best slip on exhaust for the Scout.
@apexofrandomvidz
3 жыл бұрын
I take it out periodically, it's sleeker than the stock and loud. But a good sounding loud if that makes any sense
Nice gen 1 Raptor!
@apexofrandomvidz
2 жыл бұрын
Thanks, it's a keeper until another V8 tank comes along.
@MrCsburns
2 жыл бұрын
I'm with ya on that, 2012 white Raptor here, and buying my first Indian scout this week
@apexofrandomvidz
2 жыл бұрын
Awesome. I have a few videos on my first Indian scout. I came from a Harley, and recommend the Indian most definitely
Torque clamps to 45in/lbs not ft/lbs. It’s a typo in the instructions.
@apexofrandomvidz
2 жыл бұрын
I'll insert that in the description. Indian sent me a new cam screw set, so I knew what NOT to do. Hand tight pretty much, it's been holding since I made the code.
Where do you buy you cell bike protector?
@apexofrandomvidz
2 жыл бұрын
Thanks for watching. The bag actually came with the bike from the person I purchased it from. I think he got it directly from the Indian website.
Did u do a tuning after the install of the slip on exhaust?
@apexofrandomvidz
3 жыл бұрын
Thanks for watching. No I did not, A tuning is not necessary for just slip ons. Once you start with slip on and air cleaner that's when you want to adjust the fuel management.
@R3RLEE
11 ай бұрын
No need...just let the bike running for about 15min after installing and the ecu will adjust itself and recognise them.
You forgot to mention you have to remove the 2 other bolts from the bracket.So a total of 5... not 3...just got done doin this myself.
@apexofrandomvidz
Жыл бұрын
Thanks for sharing and thanks for watching .
What tank bag you using?
@apexofrandomvidz
Жыл бұрын
The bag came with the bike from the previous owner but I believe it is the original Indian tank pouch. Thanks for watching www.indianmotorcycle.com/en-us/shop/accessories/luggage-racks/genuine-leather-tank-pouch-with-clear-pocket/?pfm=Browse
The smoke is the machining oil from the manufacturing process.
@apexofrandomvidz
Жыл бұрын
Yeah, at first I didn't know. But viewers like you told me, made me feel safer lol. Thanks for watching.
Did you have to re tune the bike or not necessary?
@apexofrandomvidz
3 жыл бұрын
Thanks for watching. On the packaging, it has a huge sticker that says "Get the FuelPak". 'm sure it is a marketing tactic, however, for just doing slips on most people do not retune the bike. When you do the air breather and the slip on that is when you start to retune.
@4pd759
3 жыл бұрын
Slip ons dont need a retune from what ive heard
@tonybrock1457
3 жыл бұрын
Indian dealer told me You dont have to if just slip ons
@davidgerlach1132
2 жыл бұрын
Think of them as "slip-on slippers". You simply slip them on and go.
same pipes on my bike amazing sound 😉🤙
@apexofrandomvidz
3 жыл бұрын
I was caught off guard as soon as I started the bike. Super Loud.
The smoke is the oil burning off the exhaust
@apexofrandomvidz
3 жыл бұрын
That's what I figured, wasn't really positive so I didn't want to say it on video. Thanks.
same pipes on my bike 🤙😉
@apexofrandomvidz
3 жыл бұрын
Awesome. Did you keep the stock exhaust or was able to sell them?
@wildindiano
3 жыл бұрын
@@apexofrandomvidz I have done also other customizations, I keep all the stock things replaced
You always want the screw head of the clamps facing down. That way you don't see them.
@apexofrandomvidz
5 ай бұрын
Thank you for the feedback.
Nice bike! Now you just need a real truck 😉 lol
@apexofrandomvidz
3 жыл бұрын
Thanks for watching. I don't know how much of a real truck you can get than a Gen 1 raptor with Roush Package. But if it leads to a f350 then I need this channel to blow up!!! And get paid....lol.
@traviskimbrell1209
3 жыл бұрын
@@apexofrandomvidz 🤣🤣🤣 I'm just messing with ya.
Polaris makes a good motorcycle and snowmobile. Indian closed their doors in the fifties.
@apexofrandomvidz
2 жыл бұрын
After being owned by Polaris, Indian is making some good stuff
@BB-1990
2 жыл бұрын
And Harley was bought out multiple times, and went bankrupt so stfu.
Nice tutorial but you didnt fix the bottom pipe. Still not straight
@apexofrandomvidz
2 жыл бұрын
There were a few adjustments I made off camera.
Wow that stock exhaust sucks! It always kind of baffles me that manufacturers more often than not put terrible sounding exhaust pipes standard on there bikes and basically leave it to aftermarket companies to come up with better designs.
@apexofrandomvidz
3 жыл бұрын
Yes, it really did. Also sounded like the Jetsons.
@Aglassact77
2 жыл бұрын
@@apexofrandomvidz it’s because they do make better pipes, it’s just that Indian wants you to pay an extra $1,000 for the stage 1 exhaust upgrade . Silly I know...
@davidgerlach1132
2 жыл бұрын
There's a method to the madness: You have answered your own question... "manufacturers more often than not put terrible sounding exhaust pipes standard on there bikes and basically leave it to aftermarket companies to come up with better designs." Welcome to the open competitive capitalist market system!
It's smoking cause the pipes are brand new
@apexofrandomvidz
Жыл бұрын
Yeah, I figured that was the reason. It went away after the next time it started. Thanks for watching.
Meowing like a kitten. Definitely not a Harley-Davidson.
@apexofrandomvidz
2 жыл бұрын
Growling like a lion now. Thanks for watching.
Hard to believe there are still guys trolling around out there using exhaust noise trying to get people to notice them.
@apexofrandomvidz
2 жыл бұрын
It is the best and on of the cheaper way to get attention.
@shawnfernandez1181
2 жыл бұрын
umm...Eve...wth you talking about? You want people to see you. Not sure I understand your point.
@eveihlone2192
2 жыл бұрын
@@shawnfernandez1181 You're proud of your vehicle -- great. Don't ruin it with the loud noise gimmick. You appear a fool.
@shawnfernandez1181
2 жыл бұрын
@@eveihlone2192 lol Eve...u humor me with your statement "you appear a fool" you have no idea who I am or my role in life. You are a fool stating that to me and lost all respect. Carry on
@eveihlone2192
2 жыл бұрын
@@shawnfernandez1181 I'm referring to the loud exhaust community at large.
thats terrible fit for V&H.. they need to be 1/2 inch longer to cover all the chrome.
@apexofrandomvidz
Жыл бұрын
I'm not a chrome person and prefer the all black,. But I'm sure that was their intentions, to have the chrome out the back portion. Overall, they are amazing and loud. Thanks for watching.
@Boobtube.
Жыл бұрын
@@apexofrandomvidz I'd paint the chrome with high temp black paint.
@apexofrandomvidz
Жыл бұрын
It's very minimal and honestly I don't even notice it anymore. I get many thumbs up just the way it is. Thanks for watching.
Great video
@apexofrandomvidz
Жыл бұрын
Did you plan on getting the same ones? Hopefully this helped, thanks for watching!
@kevinberdine
Жыл бұрын
Yes. You sold me!
@apexofrandomvidz
Жыл бұрын
Fantastic, ride safe.