I just got my new Joker levers for my 2021 Scout Sixty but haven't installed them yet. I've seen in other videos that for the brake lever, you need to manually remove the actuator from the stock brake lever and put it in the Joker lever. I didn't see you do that in this video. Did I miss something or has there been changes made to the bike's brake system or to the Joker levers as of late?

@TwoIndians

2 жыл бұрын

You are correct, I didn’t get that in the video and forgot to cover it in my voice over work.

The bobbers transformation is truly amazing dude!

That bobber is a show stopper! Love the grill hut!

Awesome! Cathy wants floorboards on her Scout too, thanks for this!

Great DIY How-To content, thanks!

Wow, looks great, can't wait to do my bobber

This is such a nice bike!

Thank you so much for sharing this video so helpful the music is so cool and the surprise at the end so awesome 👏🏾

Great video. Thanks!

Looking good !

Love the grill hut, I'm stealing that, so glad I found this channel, can't wait to comb through the rest of you vids. Keep up the great work

@TwoIndians

2 жыл бұрын

We have quite a bit of content so help yourself. Only been at it a couple years so less than 200 videos so far.

Looks great , enjoy 😊

Another great video

Nice upgrades!

Looks great

Love the video. Keep up the good work brother.

@TwoIndians

2 жыл бұрын

Trying to keep up is a daily challenge. I appreciate the kind words! Humbled.

Nice!

I need those master cylinder covers. The paint is peeling up off of my stock ones, looks terrible lol. Good to know you don't have to bleed the brakes. I think your backyard looks pretty cool and I dig the grill shed. You are a funny guy... lol.

Wow , Lucky Man~~

@TwoIndians

2 жыл бұрын

In what way am I lucky? And thanks for watching!

hehehe ii love the effects~

nice

Really like how the Bobber has turned out. It is looking Badass , great job and by the way the backyard and the chicken wings and a cold one looks like a nice place to just kick back

@TwoIndians

2 жыл бұрын

Thanks so much for the kind words, we’re really happy so far. A few more things and we are done! Hahaha.

There looked like a lot of free play on the clutch lever, did you adjust it after? fantastic how to.

Nice grill

Wow!! Great video Brian. Superb camera angles. The JM floorboards looks just Kuryakyn. The issue with these models are that they don't have the peg feelers, so if you lean too much to your right, the exhaust can get scraped. It would have been great if they had them...thoughts?

@TwoIndians

2 жыл бұрын

Thanks for the compliments! Yeah I didn’t much care for for those stoppers, when I’m dragging the floor boards on the springy I don’t have those to worry about. My opinion is they just get in the way. Drill a hole in the bottom and run a screw up in there if ya want. LOL

👍👍👍👍👍👍👍👍

Great video! Concise and precise. As I have also a passenger seat, I'm thinking to buy matching floorboards driver and passenger. Do you know if they are the same? Is it enough to take 2 pairs of the same floorboards? Thank you!

@TwoIndians

2 жыл бұрын

Joker machine also makes smaller pegs for the rears, I have seen them on their website. There is a link in the description which should take you there. Thanks for watching, I really appreciate it. Please check out our other videos!

Donde puedo comprar el sensor de oxigeno trasero para una indian scout bobber sixty 2021?

Couldn't find the Brake Reservoir Covers on thier website 🤨

Fantastic video. I can seem to find where to pick up the toe pegs. Any help?

@TwoIndians

2 жыл бұрын

The toe pegs are from Indian Motorcycle, they are called the Select toe pegs and you get one pair in the box so don’t order two. Hehe www.indianmotorcycle.com/en-us/shop/accessories/floorboards-pegs-foot-controls/select-toe-peg/?pfm=Browse

Love an indian but my price range (second hand) i can only afford the 1300cc where as if i buy the harley streetbob ill have the 17 to 1800 cc im used too, shame as i like the indian bikes, currently saving up for a cruiser and going to px my xjr1300 fingers crossed ill be sorted by christmas for my cruiser

What about replacing the actual rear break lever? (not the peg)

Hello, what letter font is your tank badge, it looks good. Is that a decal or custom painted on?

@TwoIndians

Жыл бұрын

Custom painted. It’s meant to resemble the font from the movie post Maleficent. That’s what my wife named the bike. I have a great video called the Art of custom Paint.

Donde puedo conseguir el sensor de oxigeno para una scout 2021 más economico?

Good vid, can this bike be retrofitted with wider rear tires ? Thanks

@TwoIndians

11 ай бұрын

Of course! Lots of guys putting fat tires on these. I wanted to do some bad ass wheels and tires on it but my wife said no LOL

🏍️💨💨💨💗💗💗 INDIAN 😊

DAMN that's one sexy ass bike!!! Subbed!!!

se servira colocar un alza volante

the Barefoot Mechanic!

@TwoIndians

2 жыл бұрын

Born n raised! 😂

I’m looking at changing out my shift and break peg on my Chief but something bent and broke my rear break peg so I need to figure out away of getting the portion that screws in out 🥴

@TwoIndians

7 ай бұрын

Check out Brandon Bicasso’s YT channel. He rebuilds damaged bikes and recently completed a Chief. I bet he’s got a video on it. Tell him I sent ya! Awesome dude

Have you changed the grips themselves? That's one of my next moves.

@TwoIndians

Жыл бұрын

No, she likes the grips she has. I hate them hahahaha

Do you have a link for the floorboards?

@TwoIndians

Жыл бұрын

I beleive it’s in the description. Jokermachine.com

That little retention spring on the pin for the foot pegs has to be about the dumbest thing I've ever encountered on a bike. Hard as hell to get off.

@TwoIndians

Ай бұрын

It seems to get easier the more I’ve done them. The key is to have a very sharp or small pin point object to get under the pin.

Hehe the nuts could be 13mm… or, SAE 1/2” equivalent. The way to tell, is if the threads are metric, it’s technically 13mm… if threads are SAE, it’s 1/2” ;)

Is the saddlebag we see in this video a third party saddlebag or an official Indian one? If it's third party can you share the link of where you got it from please?

@TwoIndians

Жыл бұрын

That’s from Indian

I'm not sure I'd define 100 dollar clutch pegs a low cost big impact item. They look neat though.

@TwoIndians

Жыл бұрын

they were only $59 when I shot this LOL

We want wings!

@soganoflarider

2 жыл бұрын

Wassup B! Can’t forget the beer either..Also it was cool meeting you back in July. Maybe we can all meet up again soon.

Where do I find these parts

@TwoIndians

Жыл бұрын

Should be in the description but Joker Machine dot com is where I got most of that stuff

Hello, I am driving the same motorcycle Please give me a link to the replaced products

@TwoIndians

Жыл бұрын

Just go to JokerMachine.com and you can find all the parts there! Thanks for watching!

@tv-pt1hr

Жыл бұрын

@@TwoIndians Thank you ^^

So tell me is the Spyda afraid of Malificent?

@TwoIndians

2 жыл бұрын

No she’s much bigger and her name is Gamorrah from Guardians of the Galaxy. So she’s a bad ass too.

@ericsuperhawk

2 жыл бұрын

@@TwoIndians epic name

I was cringing every time you were working over top that brand new, expensive custom paint on the tank! Use a tank cover I screamed! That's one nice Indian!

@TwoIndians

2 жыл бұрын

LOL, you are not wrong!

"you could use a chisel but that'd be so barbaric" (viewer immediately clicks 'like').

@TwoIndians

2 жыл бұрын

LOL, that’s how we did it back in the day. “Whack”

No engine guards?

@TwoIndians

2 жыл бұрын

Not on this bike. Haven’t been able to find anything that would look good with the bike’s theme.

@rodolfosabater7781

2 жыл бұрын

Why?

Good evening my friend how are you brother I am following you and you encouraged me to buy an Indian motorbike. I live in Saudi Arabia in NEOM and I want to buy a 2021 classic bike, but my height is 174 and I see myself as big on the bike. What is your advice to me? And accept my regards

@TwoIndians

2 жыл бұрын

Good day sir! I am honored by your comments. In my opinion you are not too large for the Indian Scout but everyone is different I am 178 cm and feel like I am also too big but it is fun to ride. I am not comfortable on the Indian Springfield especially for long days of riding. The Scout Bobber is is not good for long distances, please stay in touch and let me know what decide.

@amon___1859

2 жыл бұрын

Thank you for your kindness and quick response, I will tell you everything new. Remember that your brother's house is in Neum and that you have been honored with your hospitality. We hope you and your family are in good health.

@TwoIndians

2 жыл бұрын

Sorry I meant to say I am more comfortable on the Springfield for longer rides

@TwoIndians

2 жыл бұрын

Neom looks like a beautiful place!

@amon___1859

2 жыл бұрын

You ordered SCOUT 1200 - WHITE SMOKE. Does it fit my height because I want to travel on it? Thank you@@TwoIndians

Oh my God I really like that Grill Hut! We like it when you do garage videos we always bet on whether you are going to show your bare feet or not. Becky says I will bet you in a big cry for attention he shows his bare feet. I'm like if he does I'm going to drink this whole bottle of water. Thanks a lot Remington now I have to pee. Oh before I forget make sure you tell Barbara her bobber is just looking hella cool Wicked. It looks absolutely Maleficent.

@TwoIndians

2 жыл бұрын

You’re too funny

I like your videos but I'm not sure why you would give us the finger???

@TwoIndians

4 ай бұрын

It’s a personal joke between me and a friend of mine. ✌️

Sorry , total waste of time and money, but it feeds your minuscule ego!

@TwoIndians

2 жыл бұрын

Actually my ego is HUGE, gargantuan! So big I needed a 116 BBK on my Springfield to carry it around. Thanks for watching and thanks for your insightful commentary. My work here is done...

@stephencummins7589

2 жыл бұрын

I own a Scout bobber 20, I live it just as is. I have installed for my convenience saddle bags,luggage rack crash bars and a windshield.

@TwoIndians

2 жыл бұрын

Awesome, set it up the way you like it and we'll set ours up the way we like it. Sound like a good deal?

Total waste of time and money