Excellent video, thank you very much. Made it all straightforward, using your kit to replace the pads. All great, thanks!

@octoinkjet

Жыл бұрын

Glad it helped

To confirm. It it possible to use the T04D1 maintenance box as a replacement waste pad unit even though it has a chip. The chip itself is unused and won't do anything in the ET-2750 (or the other printers listed in the description) but the box and pads themselves are still physically compatible and will fit the printer. This is a useful option if your need is time critical and delivery timeframes would take weeks+ for our pad kit to arrive. You would still need to reset the waste ink counter and for that you can purchase the reset key via www.octoink.co.uk/keys Hope that's a useful bit of info in case you were struggling to find the part quickly enough.

GREAT TUTORIAL 🙏🏼

The waste ink counter (WIC) reset utility works great too. With the new pads and WIC reset the ET-2750 is just as good as new. The free utility requires a code from Octo Inkjet. The code works one time and cost me about $9.00, a new code and payment will be needed for the next reset (which I might need for my Photo R220 or Photo 1400).

Will the same parts work with EPSON ET-2850?

@octoinkjet

Жыл бұрын

Yes. It’s the same part for both

I am just curious, you mention a key/reset. I assume this comes with the original Epson part you buy? Or is this something that shows up in settings once you place the part in?

@octoinkjet

Жыл бұрын

The reset process is needed to clear the waste counter but probably best way to get all the info’ is to watch this video: kzread.info/dash/bejne/n5h8r9GhYdOtepM.html

@keyfeathers

Жыл бұрын

@@octoinkjet Thanks for your speedy reply :)

How can I remove that ink with the tank

@octoinkjet

2 жыл бұрын

Not sure exactly what you’re asking so I’ll cover a couple of possibilities: 1. If you wanted the installation guide for fitting an external waste tank, there’s a separate video guide in this channel for that. 2. If you were wanting to drain the waste ink, that’s just handled by removing the pads as per the guide we’re commenting on now. If it’s something else though, please comment below to clarify and we’ll go from there.

Can anyone tell me how to remove the ink pads on my Epson SX515W. I can not find anywhere and underneath the printer no removable place to get to them. I want to order one of these ink collectors. Have reset the printer. Help!!

@octoinkjet

Жыл бұрын

Hi Bill, The SX515W is covered by this (very old) guide: support.printerpotty.com/2022/installation-b40w-nx510-sx510w-and-similar-models That's for an Printer Potty (Duo) external waste ink kit rather than replacing the pads because the printers of that era weren't designed with an easily replaceable waste pad holder. Instead the pads are located deep in the printer and a whole lot harder to access, let alone replace. Hope that helps.

@williamhogan1518

Жыл бұрын

Thank so much for helping me on this. I noticed that there are two tubes which I can see and would the kit cover this

@octoinkjet

Жыл бұрын

The Duo Printer Potty external waste ink kit would, yes. The Duo stands for two.. as in two waste tubes. www.octoink.co.uk/pid/343

What about the pads under the print head?

@octoinkjet

8 ай бұрын

Do you mean the platen pad that runs the width of the printer? If so it’s actually simpler to periodically mop up any excess with kitchen towel.. or avoid using the borderless printing function as much as possible.

Do you ship to Canada?

@octoinkjet

4 ай бұрын

We do. We also now offer a DDP shipping service which means we can pre-charge all import/PST/GST taxes, etc.. and that speeds up delivery speed.