These directions were perfect! My magenta hadn't been working right for months and the cyan kept missing lines after performing the head cleaning and running a nozzle check. Using this product and following the directions in the video worked like a charm! Just make sure you do the power cleaning after cleaning the printer heads with the cleaning solution and run another nozzle check to ensure everything is printing properly.

@Jenn2004kuz

4 жыл бұрын

Im having the same problems with magenta and cyan! Im going to try this!

@BestPrinters

2 жыл бұрын

Awesome! Yes it is important after using the cleaning kit, geni.us/wArXsZT , too run a power cleaning so that the ink is pushed into the system.

@AgreeWeCanDisagree

Жыл бұрын

Mine just started with the magenta so I’m going to try this as well.

These directions are so clear and simple to follow. After: 3 nozzle checks, 2 print-head cleanings, and 1 power cleaning --- my printer works again. Thank you so much for filming such clear instructions and for selling a reliable cleaning kit product.

@BestPrinters

Жыл бұрын

Great to hear!

Thank you! This was very thorough and easy to watch. Others I’ve watched gave too much info. You were straight to the point. Ordering my kit today and I’m hoping this work.

@BestPrinters

2 жыл бұрын

Awesome and thanks for subscribing!

This worked perfectly! My printer was basically printing blank pages. After using the kit, then doing 2 nozzle cleanings, and 1 power cleaning it worked. I was going to give up after nozzle cleanings but the power cleaning made the big difference. Thank you.

I was getting white vertical lines through some of my text and followed Janice Carter's suggestion of a power cleaning. It worked! Thank you Janice. Good video.

@BestPrinters

2 жыл бұрын

Sorry I wasn’t able to get to you message. Please create a new comment with the same question if you still need a response. Thank you!

I followed your tutorial to the T. It was informative and precise. When I was finished, I ran a head cleaning and nozzle check and my magenta lines were still missing. I read the comments down below and learned about Power Cleaning. So I did that. I'm not sure if it was the Power Cleaning that brought back the magenta lines or a combination of both methods, but I got all my colors back.

@BestPrinters

Жыл бұрын

Great job!

Purchased your Cleaning Kit, it worked like a dream. Don't forget to do the power cleaning. Thanks

Thank-goodness for you and KZread!! I tried other suggestions prior to buying the Printhead Cleaning Kit and Power Cleaning (which many said not to do). NOTHING worked until I did BOTH the Printhead Cleaning AND the POWER CLEANING! Everything is back to normal!! THANK YOU SO MUCH for your video!!

@BestPrinters

Жыл бұрын

You are so welcome!!!!

@nblanchard1667

5 ай бұрын

Same here. I was hitting a brick wall until using both to clear a blockage in the Black nozzle and Power Cleaning my way back to clear print.

This worked for me and I was happy with the purchase rather than buying a new printer at $300. I put in some suggestions for some things I learned and put them in my Amazon review for the product.

@BestPrinters

2 жыл бұрын

Awesome, thank you!

Worked perfectly, this is the second time in about a year that I used your cleaning kit. Thanks!

@BestPrinters

3 жыл бұрын

Glad to hear it worked for you!

@duanewilson3390

3 жыл бұрын

I did this and I made 200 copies and my black ink isn't coming out

@ponymovie

3 жыл бұрын

@@duanewilson3390 There was another suggestion to turn the printer off when not using it. Helps to keep from drying the ink out. After I used the kit and started turning the printer off...have had the best results doing that.

@abianeconciertos2319

3 жыл бұрын

2nd time?! I hope this doesn’t become a regular occurrence.

Many many thanks for this excellent, clear and well filmed video.

@BestPrinters

2 жыл бұрын

Glad you enjoyed it! Consider subscribing to my channel

Great video. Can't wait to give it a try. I do have a question however. It is possible that the clog is at the supply tank into the vein as opposed to at the print head?

4 years later and this was still very helpful!! !Thank you!!!

@BestPrinters

5 ай бұрын

Great to hear!

Finally got around to using this product on the Cyan printhead. This did the trick. In my case the ink levels were still 2/3 full. I think it might be a good idea to print in full color periodically just to keep things moving.

@hurstma59

4 жыл бұрын

My color ink wells are over 1/2 full.

@quatrax8691

3 жыл бұрын

You just need to do a Power clean. Hold the on/off button and the "?" Button. This guy is only trying to sell his stuff while it can easily be fixed

@BestPrinters

2 жыл бұрын

Absolutely, I am glad it worked for you!

@bowill2179

Жыл бұрын

@@quatrax8691 Did a power clean still doesn't work

@Sheltieshangrila

Жыл бұрын

@@quatrax8691 I did 2 power cleanings in addition to at least 5 print head cleanings and my black still wouldn't work until I used this product. While there's other cleaners on the market, his kit is set up for easy & immediate use. And with Amazon Prime, you can get it delivered same day. Your negative comment is completely undeserving b/c power cleanings don't work for everyone, as per lots of other comments on here.

THANK YOU! For me it was just about the first part of the video, with interrupting the nozzle check and then placing a paper towel to collect all the excess ink! Everything is clean now, and saved me a lot of frustration😌🙏🏻

@BestPrinters

5 ай бұрын

Glad it helped!

Oh thank you for the tip, so easy and much simpler!

@BestPrinters

2 жыл бұрын

You bet!

This worked for me. Thanks for the instruction video and kit links 💪🏾💪🏾

@BestPrinters

2 жыл бұрын

Great to hear!

Thank you sooo much! I was able to fix my printer thanks to you.

I had a black clip fall off when I was putting the paper towel on and was curious if you had a pic or video so I can put it back on thank you

You say the cause of clogged nozzle is usually due to running the ink tank too low. For me that's not the case and I suspect my issue is infrequent use with ink drying in the nozzle tips. Do you agree?

@JohnSmith-un9fy

4 жыл бұрын

This guy is just trying to sell ink and kits. Generally the head can dry out a bit or cheap ink can cause this issue as well.

@AKbushswatter

3 жыл бұрын

Yes, my infrequent use causes the ink head to dry out, power cleaning usually works, but this may work if it doesn't.

@jeremyp8501

3 жыл бұрын

@@JohnSmith-un9fy exactly lol 99 times out of 100 power cleaning works and even if it doesn't you can easily make your own fluid with a tiny bit of research.

@JackkBurtonn

3 жыл бұрын

@@jeremyp8501 so my et2750 doesnt have the power clean option so whats the way you guys power clean? Cause ill yake a tooth brush and some rubbing alcohol and scrub a dub lol

@veganriajones3812

3 жыл бұрын

@@JackkBurtonn press the question mark and power button until the power cleaning option comes on

Really appreciate this... well-done video that I could follow along with. My Cyan is totally clogged!

@BestPrinters

Жыл бұрын

Great to hear!

What if when you did your maintenance checks and literally no ink prints ? I was getting vertical lines prior and at times just blotches on the paper. Would I use the same method?

After using the cleaning solution. I ran through a "power cleaning". After the power cleaning everything works well. The cleaning solution worked well but I needed that final step.

@BestPrinters

4 жыл бұрын

Yes I just came to the same conclusion and added it to the description. Thank you for sharing.

Hi! Thanks for your video. I have a question; my 2760 doesn’t feed up the ink from the tank through the tube to the cartridge. I have full tank of ink but my cartridge is empty. How can I fix this issue?? Help me please

Thank you for the tip,. I have added it to my tool kit! Cheers

@BestPrinters

2 жыл бұрын

So happy to hear that! Consider subscribing to my channel and leaving a 5 star review in Amazon

Great instructions. Thank you.

@BestPrinters

2 жыл бұрын

Glad it was helpful!

Hi, great video! I bought the solution and follow what you have thought. The black ink went well however I face a lot of resistance with the color inks even after flushing it twice on the yellow one, don’t have enough solution to flush twice for the other 2 colors. Ithe colors still did not come out on after nozzle check Appreciate advise. Thanks

@BestPrinters

2 жыл бұрын

Hi, just run power cleaning until the color returns.

It worked for me too! Thank you so much!

@BestPrinters

2 жыл бұрын

You're welcome!

Perfect. Tried head cleaning and power cleaning but didn't work. My yellow was dead. Cleaned yellow, did test print and perfect. Blue had lines so did same to it....perfect. THANKS.

@BestPrinters

Жыл бұрын

Awesome!

After following the first steps and taking the screw off, I then had to put it all back because it wasn't forewarned that we had to buy a kit to follow it. Might be helpful to have had this warning early on!

@BestPrinters

Жыл бұрын

Ok, thank you for your feedback.

Just purchased the cleaning kit. So thankful it's available for same day delivery via Prime. Hoping this works because my ET-2750 is only 4 years old and I've only printed 189 times with it according to the print counter. I've done a print head cleaning at least 5 times now along with 2 power cleanings but the black will still only print with a very faint outline of fonts. It won't print at all on a nozzle check or alignment. I've spent way too much time on it now so this is my final attempt at fixing it before I throw in the towel and buy a new printer, which won't be an Epson.

@BestPrinters

Жыл бұрын

Best of luck, please feel free to reach out via Amazon messaging if you have any questions or concerns.

@Sheltieshangrila

Жыл бұрын

@@BestPrinters I just finished and it worked like a charm! The only nit I have is the instructions could have been a little better... such as what all the accessories are for and the best way to heat & fill the syringe (ie: heat a mug of water in microwave for 1 minute then let bottle sit in mug for a few minutes & then to fill the syringe, feed plastic tubing into bottle to suck up fluid). Fortunately I rescue squirrels so am familiar with syringe feeding & food warming, but people who aren't might have issues, especially if they're elderly. I'm very happy with the results and your video gave excellent guidance. Just gave you a 5-star rating on Amazon. Thanks so much!

@BestPrinters

Жыл бұрын

Thank for that feedback! I am glad you were able to manage and get your printhead cleaned. Also thank you for the review, that really helps! Have a great day!

@Sheltieshangrila

Жыл бұрын

@@BestPrinters FYI that I just sent you a support question via Amazon regarding an issue that developed...

Worked like a charm! Thank you!

@BestPrinters

Жыл бұрын

Glad it helped!

When our ink supply on the ET 2750 is completely full we get an error message that warns "low ink please check ink levels." every time we print. test printing looks ok.

Hi… thanks for posting this. I followed your tutorial and it work great except now my prints and very feint/wishy washy… like the ink has been diluted… any advice please 🙏

@BestPrinters

Жыл бұрын

Repeat the process with the kit and also run a power cleaning.

It did work for me. It went from not printing at all to printing perfectly well, but I had to do a power clean.

@BestPrinters

Жыл бұрын

Glad to hear that!

Help please with my epson et-2750. My cayan is printing green. I've done head cleaning & power clean. What els can I do

Many ET-2750 has a software fault that prevent the operation of power cleaning ( and normal start) , I found that just tilting the printer in all directions , one after the other, up to about 60-70 degrees had an excellent cleaning effect. The printer became as good as new. Epson suggest to get the software fixed but it is too expensive my service center says.

I just ordered the cleaning kit because two of my colours are not coming out well and one not at all. I was just wondering should I fill my ink before cleaning? My ink levels are half full or more on all. I have done head cleaning and a power clean and left off for 24hrs then I did it again but still not working, hence why I ordered your cleaner. Please advise I just want to know if it would be best to fill ink first. Thanks

I followed all instructions as per video (twice) and it is still not printing correctly. I left it overnight and although it appears to be printing, it is extremely faint. The printer is only just over a year old but still now out of warranty, do you have any other suggestions?

I just used this after having dry printer heads and it worked perfectly.

@duanewilson3390

3 жыл бұрын

I did this and I so far printed 200 pieces of paper and I still don't have any black ink coming out

@magsmorgan2914

3 жыл бұрын

Well, most recently, I’ve had printer problems and tried to clean again but can’t get the colors to print. I’m buying a new printer and not the Epson

@BestPrinters

2 жыл бұрын

I am so glad to hear that!

Brandon I have this printer and i have a question when I print a photo when it comes out there are white lines in the photo is there a setting for this or should I clean the way you did with the cleaner...or should I get an extra lazer printer for photos...thanks

@BestPrinters

3 жыл бұрын

Hey Rick, yes so try going into your settings on your computer and make sure it is set to print on photo paper. If it already is then this kit will help with the problem.

That was a great video......explained well.....

@BestPrinters

3 жыл бұрын

Glad it helped!

@dereinezur1715

2 жыл бұрын

@@BestPrinters The person didnt say it worked.

Worked well to me congrats 🎉

@BestPrinters

Жыл бұрын

Well done!

THANK YOU SO MUCH FOR YOUR HELP! I

@BestPrinters

2 жыл бұрын

You're welcome! Consider leaving a 5 star review on Amazon and subscribing to my channel.

Worked for all my colors except black. There was a lot of resistance and it would not let me flush the solution. Any tips?

Hi, what should I do if I have A LOT of resistance in the black color? I continued to run the fluid through the others just fine! Thank you for your help.

@coltonjohnson1681

Жыл бұрын

Also, my towel keeps collecting black ink? But lots of resistance from the top part where I put the fluid in

@BestPrinters

Жыл бұрын

Warm up the cleaning fluid before application.

So after cleaning my printer heads using your product I went to run a nozzle check and the printer shut off in the middle of the check. Now it won't turn on at all. Have you run into this issue and would you have a solution to this problem?

I ordered your kit flushed the tubes & it’s printing now with blank lines now. Some of the color is working, but not 100%. Any suggestions?

I ordered one of these kits from Amazon, but sadly FedEx lost it in transit (as usual). Hopefully they find it and send it to me for my older Brother printer.

@BestPrinters

2 жыл бұрын

Hey man message me directly, click on Best Printers on my listing page and I will get you a replacement.

This usually works and has already for CM&Y but not K. I've run a couple ounces at least of isopropyl alcohol through to some paper towel underneath and it's still not printing but showing full ink on a new cartridge. Sounds like the printhead dead no? Or do I just keep going a few more rounds?

@BestPrinters

Жыл бұрын

Keep on doing the cleaning a few more times and make sure you the power cleaning once you are done with the kit.

Can I use the cleaning kit for sublimation printing?

Great tutorial! my only question is- once you're finished, do you run a nozzle check or do you need to clean the printer head after? Like what's the follow up afterwards? TIA

@BestPrinters

2 жыл бұрын

Yes you will need to run a printhead cleaning until the color returns.

@grapes770

2 жыл бұрын

@@BestPrinters ok thanks so much! Im waiting for the kit. Fingers crossed it works! 🤞

Thanks for the video. I have a question a friend lent me this printer but I can't lower the upper door, where is the release button?

@BestPrinters

Жыл бұрын

You have to push it up before it unlocks and comes down.

How did you center the printhead? When you power off the printer, the print head automatically moves to the right hand side and the printer locks it there.

Hi! I did the steps from the video and also power-cleaned the printer. However, I noticed how all colors were used except for black while power cleaning. Does this mean there's an issue with my black ink in the ink tank? Also the inks have been there for at least 9 months, what should I do? THANK YOUU

@BestPrinters

2 жыл бұрын

Not necessarily, repeat the process until all the colors return though.

Do you know how to get all the ink out??

Right when I needed it.

@BestPrinters

Жыл бұрын

Cool!

Great Tips- easy

@BestPrinters

Жыл бұрын

Nice!

Cleaning went well. I cleaned all the four inks. Although it started to work with anemic results, as I printed, the ink almost completely disappeared. It seems that the ink is not coming to the print head. What can I do to fix this? Tks

@BestPrinters

2 жыл бұрын

Hermes, is correct.

Directions were great followed them to the T. But I am now having issues with the one that I cleaned. The cartridge will not refill again. Any tips on correcting that?

@BestPrinters

2 жыл бұрын

Yes run a power cleaning after using the kit.

worked thanks!

@BestPrinters

3 жыл бұрын

Glad it helped! Consider leaving a 5 star review on Amazon.

Looks good. Thanks.

@BestPrinters

2 жыл бұрын

You bet

I bought the cleaner solution and I followed all instructions, the cyan is not printing at all. Any help would be greatly appreciated.

Hi Best Printers, Have you ever used this product with an Epson ET-2550-? I am able to clean printer head but not the lines.. and I may need more color ink but I have black and only need black at this time. Can you help? Thank you... or should I just save time and buy an HP jet printer? TY

@BestPrinters

Жыл бұрын

SO the printhead is the only thing you really need to clean. After doing the cleaning run a power cleaning. You should have full quality once you complete those two things.

Hey I got a question…I accidentally set up my brand new ET2750 I load couple of the inks and I forgot to load up the black and the yellow… but I filled them afterwards, but it doesn’t give me an options to charge the black and the yellow… eventhough I reset the ink the black and the yellow still not printing or showing… what should I do ??

@BestPrinters

2 жыл бұрын

In the settings there should be an option to charge the ink after set up.

Awesome video. Purchased the cleaning kit just ran the nozzle check and flushed the heads out. The color segments are not printing still. Only the black color. Any other suggestions?

@BestPrinters

Жыл бұрын

You will need to run a power cleaning after running the kit.

@mariavarela1218

Жыл бұрын

:( I have an error message that I cannot bypass after I completed the cleaning kit instructions.

Hello, I've replaced the ink and cleaned the ink cartridges and printhead. I did the nozzle check, print head cleaning and power cleaning and nothing has worked. The horizontal printing isn't working well and when I print out the sheet all the segments are spaced apart none touch at all or overlap. Idk what else to try. If you can please put some input on what else i can do. Thank you.

@BestPrinters

4 ай бұрын

You will need to repeat the cleaning process again and you may need to also warm up the fluid over boiling water, and reapply warmed up solution.

I need this and a tutorial for the Epson WP-4025, please. Thank you so much! Greetings from Germany.

Will the cleaning kit work with an Epson 2720. Also my problem seems to have occurred when I overfilled the magneta and now I can only print back or pink. Any suggestions?

@BestPrinters

11 ай бұрын

The cleaner should help.

Hoping you get this and have an Idea...Bought your solution and flushed everything. Everything flowing well and even pulled ink back into the print head cartridges. All colors are not printing at all!! It's like its not pulling the ink out of the tanks. There is ink from tank to nozzle but not to paper.....any ideas?

@BestPrinters

Жыл бұрын

Now you will need to run a power cleaning. That will push the ink back into the system.

I have an issue in that my black ink will simply not go into the reservoir! It's been fine before, now I turn it upside down & it will not drip into the tank. I have the Epson ET-2750. Any help will be appreciated, thanks!!

@BestPrinters

2 жыл бұрын

Run a power cleaning.

Now that the cartridge is empty how long does it to draw ink from the reservoir? Right now my black and cyan are blank

@BestPrinters

2 ай бұрын

it may need to go through a few manual cleaning cycles through the system before it's back to normal

Hi, I just saw your video. A very good attempt to help people. I want to ask you if you could help me fix my printer problem please. It is printing haphazardly in portions of the page.

@BestPrinters

Жыл бұрын

Hi! Yes you will need to do this cleaning.

i have a epson et 2750 printer using the ink that came with the printer and epson ultra premium photo paper glossy new out of the box only been using it about a month or so every time i run a print of a picture i end up with a blue line at the bottom some times blue and purple line but if i copy a photo from the scanner no problems ive tried reinstall of the drivers and software still the same problem even tried using a different computer with just the drivers tried nozzle check head cleaning power cleaning any idea what is causing this and is the link you left for ink is it good as the original in printing photos

@jayt9665

3 жыл бұрын

turns out a bad wireless connection caused the problem after disconnecting the printer and reconnecting its printing pictures just right

Hazle una limpieza a fondo; desconecta la impresora, luego conectala otravez y al mismo tiempo oprime el boton de encendido y el del signo de interrogacion al mismo tiempo y espera unos segundos aparecera en la pantalla limpieza a fondo de los cabezales tardara 10 min, espera q lo haga por si sola camina por ahi y al terminar te dira va a funcionar despues de 12horas, pero mande imprimir una hoja de colores y funciono, haz lo mismo y que tengas buenas soluciones, bendiciones.

@BestPrinters

2 жыл бұрын

Gracias!

Where can I get the printer cleaning solition

i did used print head cleaning but needle still hard to press and not full yet. Looks like under hole blocks?

@BestPrinters

8 ай бұрын

If you remove the plastic cartridges you can clean the nozzles directly.

Thanks! I used your kit to clean all four colors. I thought the printer was toast. A little messy though, so be sure to use latex gloves. At first the printer wouldn't print at all, but after leaving it sitting for 24 hours, the printing miraculously started to work (faintly), but two print head cleaning cycles from the Epson printer interface cleared everything up and it's all good!

@BestPrinters

Жыл бұрын

Great to hear!

Hi I have the same Model i did not use it for 4-5 Months and now it print white papers 😢 what should I do ?

do you have to do an ink charge again? thanks

@BestPrinters

2 жыл бұрын

Yes you do

So after the flushing, what about the left over cleaning solution? Will it containment the rest of the ink when it starts to fill the print head chamber?

@BestPrinters

2 жыл бұрын

No just run a power cleaning and it will be flushed out.

I am having issues with my et2800 printer. My black ink cartridge causing vertical stripes on the image.

UPDATE: I did a "power cleaning" and that fixed my problem. I probably didn't need to order and perform the cleaning with the Printhead Cleaning Kit. Followed directions after ordering the cleaner. It's the magenta that is causing my problems. Ran multiple head cleaning and nozzle check after cleaning, still no magenta showing up on the nozzle check printout. Any suggestions?

@BestPrinters

11 ай бұрын

Make sure Magenta is totally full and run another power cleaning.

Hey. So i did this now its not sucking any new ink from tank. What after the video how will the ink return in the cartridge head as its all flushed with clean solution

@BestPrinters

2 жыл бұрын

Use the power cleaning function.

I like this printer because it is economical. I don't like the fact that you have to set parameters every time you print for paper size, paper type. I am so used to that being automatic. But money savings takes precedent. :)

@BestPrinters

2 жыл бұрын

Thanks for sharing!

What is in the fluid, please? Is that something we can replace ourselves?

I cannot push the syringe down. The pressure build up in the ink tank is not allowing it. In other words I can't push any fluid through. What do I need to do l?

@BestPrinters

6 ай бұрын

Warm up the cleaning solution.

Where can I buy a extra empty cartridge for my ink. The pink cartridge nozzle broke right were the tube connects

@BestPrinters

Жыл бұрын

You will have to look up the replacement part. Maybe on eBay.

If everything is coming out just a blue color will I need 4 kits to clear out the each color.

@BestPrinters

20 күн бұрын

That's normal. You only need one kit maybe one additional if you need more solution.

My issue is with excess black ink printing on my paper. Nozzle check is good. I did a power clean and it's still has splotches of black ink. Any suggestions?

@BestPrinters

4 жыл бұрын

Keep running the power cleaning until it returns to normal.

I have the Epson ET-2720 and the top glass does not lift up so I can't get to the print nozzles. All the colors stopped working. Is there any way to fix this printer?

@BestPrinters

Жыл бұрын

Yes you will need to remove the screws around the glass scanner to reach the printhead.

Thanks!

@BestPrinters

8 ай бұрын

You bet!

How do I order the cleaning kit

I had filled the ink wells and then found that the colours were faint. By flushing/cleaning as per your video do i lose all the ink that was in the wells?

@BestPrinters

10 ай бұрын

Yes

Can I remove ink the same way in order to replace it with sublimation ink???

@BestPrinters

2 жыл бұрын

It is a little more complex than just doing this.

How do I keep the printer heads from getting clogged with ink on my ET2750 in the future?

@B.A.D._MX

4 жыл бұрын

Don't let your INK levels get too low.

@paulkahlert

4 жыл бұрын

@@B.A.D._MX And make a (small) colorprint at least every three days. Ink tank printers are supposed to print regularly

@BestPrinters

2 жыл бұрын

Dont run your ink too low, and print weekly even if its one page.

How did you get the top lid to flip all the way back for access?? Mine doesn't go back that far.

@dillorado

2 жыл бұрын

Keep pushing it back gently. It gets stuck a bit.

@medusa569

2 жыл бұрын

@@dillorado I\ll give it a try again...I would up just taking the top off from the left side

I was getting the colors but no black printing. I tried head cleaning and it didn't help. I tried using the kit to flush the black, and when pushing slowly on the syringe, the tube popped off and I got black ink everywhere. Any other suggestions?

@BestPrinters

4 ай бұрын

You will need to warm up the solution and reapply. Gently steady pressure will eventually allow for the blockage to break and you'll be able to clean the printhead.

I need help on how to clean because my ink spilled all in it and inside

Can I change the ink to sublimation ink on this epson

@BestPrinters

2 жыл бұрын

Yes, but you have to flush out the old ink.