THE most thorough video i've seen on youtube yet. Very well done. the close ups and detailed explanations were very, very helpful. Excellent video. Many thanks.

Extremely good video. Clear, detailed and yet not excessive. I don't think I've seen anything as good as this for any repair video, not just washing machine repair. Thank you very much for your public service. Everyone please don't forget to like and subscribe; this is the least we can do as a thank you.

super awesome I did exactly as directed. 1st I checked the pump make sure no clogging. 2nd I twisted the bottom portion of the agitator in the washer and noticed a clicking... Then, I disassemble the outer cover, removed all the clips 5:42, and the motor coupler was completely cut in two. I had to grab it to make sure it was in two bc it's position looked fine until i grabbed it and it was completely in two. Thanks for saving us a trip to Hades!

You're a life saver. I'm about to get a new one until I saw your video. For $12 my washer came back to life. Thank you

Perfect video! I just finished this repair on my washer. Thank you so much for the clear, concise info!

@kaushalramani1601

Ай бұрын

Where did you order the parts from and what is it called? Mind sharing the link of the part?

Wonderful guide to fixing the NON-SPIN washer. Mine Whirlpool washer is almost 15 years old and I followed step by step to get the coupler in (got it for $3 on TEMU) and it took me almost 2 weeks now and then to get the motor back in place. But the rest of the taking apart and putting them back were breeze following your video instructions / demo. Great job. It saved me $700 + as I was ready to buy a new washer and get it installed. Thankyou... God bless you.

Thank you so much!!!! Best video ever!!!!!!! I had to replace both the agitator and motor coupler. This video was extremely helpful as we were taking our washer apart.

Very detailed instruction for troubleshooting! Thanks a lot Sam for your sharing!!!!!

Nice vid. Detailed accurate. No grey areas. Simply explained but expertly done

you're the man Sam! thanks for making this video. found my issue in 15 mins. i appreciate you.

Very nicely done and with a lot of patience. Thanks dude!

Very Helpful... it was exactly what happen to my washer today. By the way I had a Crossley Brand and the Whirlpool part worked perfectly.

Thanks a lot Sam for your sharing. 👍🙏

That's exactly what went wrong with mine, that + the agitator dogs. In an apartment, and maintenance has been a no show twice, and I just got in trouble for trying to work home yesterday and today, so I'm going to fix it myself. Same exact washer too.

Thank you for your explanation.

Dude you are the man.. 6 stars fantastic video

Extremely well done video. Thank you.

Wish i could send you more likes your videos was very helpful and self explanatory

Thanks! I got bent over for $30, but it's fixed. Was the plastic race type. New one was metal.

Fantastic video! Thank you so much!

Drink every time he says "nice and flush"! Thanks man, saved me money!!

THANKS!!! This helped me a lot.

Thats a Super clean Direct drive machine

Great fix!

Great explain detail.Thank you and keep up a good work bro'

🧐🤔😮😮😮😯 U Rock haven't made it passed the pumps yet but already excited and confident That this is the issue and first video THANKS AND HELL YA ILL SUBSCRIBE LOL 💯

Thanks sam i hope you best

Thanks a ton Sam

I have that problem now. I can hear the motor running, and there is no water in the tub so the pump is working. My question is should I just go ahead and order the coupling, or check for some other possible problem? Thanks for this great video.

Nice video! I did mine 4 years ago and its still alive. But I had to clean the pump out today.. Cat hair ...lots of cat hair..

thanks alot for this video

Thanks for the video

Thank you very much!

Is this a direct drive or VMW machine? I’m having issues with a VMW kenmore that isn’t agitating well and isn’t spinning out all the water. I have to put it on manually spin dry to get excess out.

Thanks bro!

Thank you brother…. Have u ever worked on the dryer … same brand?

Hi great Video, buy the way. My mini machine makes a grinding noise when its washing. Sounds like if you have 2 plastic circles with teeth. When they go around it makes that noise. Also it won't spin anymore.. Do you have a idea what is wrong? I checked the belt, but it ok. Thanks ❤❤❤ Just watched you remove those white things, could it be the same in my machine???

Hi great Video, buy the way. My mini machine makes a grinding noise when it washing. Sounds like if you have 2 plastic circles with teeth. When they go around it makes that noise. Also it won't spin anymore.. Do you have a idea what is wrong? I checked the belt, but it ok. Thanks ❤❤❤I am a woman, was forced to do everything, my x husband couldn't change a light bulb..

Thank u for sharing knolage sir

you did not show how to get the whole outer part of the washing machine off what good is this video

@Travt88

Ай бұрын

how many paint chips did you eat as a child? lol

My Amana is less than 2 years old. It's not agitating. I took agitator off. Dogs look good, but look good. What do I know? I'm taking agitator to appliance shop. See what he has to say. I've known him for 30 years. I could order dogs, but if he has a code machine maybe he can tell what's wrong. I can't tear it apart and buy parts. Finally, I'll bring the entire washing machine in to him. ITS NEARLY IMPOSSIBLE FOR IT TO BE RUINED LESS THAN TWO YEARS. THERE WAS A GRINDING NOISE LAST TIME. HECK!!!

how do you change the stadlelizer rod on the G E heavy duty 2 speed washer

Fantastic video my friend. Very informative and well explained. I learned something new 😀 Is there a similar part on a speed queen washer? Thanks for sharing and have a great weekend.

I have an Amana and the agitator moves just a little and makes a clicking noise. Is this the same problem?

If the screw pops out could water go in there and come out on the floor under machine?

Hi Sam & people! I have the Whirlpool LXR6232E Q0, It looks the same as this one. Everything is the same, motor sound, full of water. When I do the switch trick, I can see that it tries to turn as it does slightly, the barrel spins slightly too. What type of motor coupler is compatible with this washer exactly? Thank for help everyone!!!

My Whirlpool top loading, makes weird noises in the Spin Cycle. Can that be possible bad belt. Washer is over 10yrs old. Never replaced belt at all.

I was hoping this was my problem but it’s not must be the transmission

We will have you

AWESOME VIDEO MAN! OKAY WHAT DO YOU CALL THAT PIECES AND WHAT MODEL NUMBER TY 👌🤙👋👍

Lies! The hardest part was by far reinstalling the cabinet 🤣

the video very usefull ..but Could you please let me know the part number or the part name.its gonna help me easy to find or order the part....thanks alot

@tammybarnes6311

Жыл бұрын

Lowes has a number with the company. All they need when u call is your model number and serial number.

Thank you for this excellent video tutorial. I have an older model Inglis/Whirlpool and have this same problem. I took it apart like you did but not having experience working on those machines, I expected a broken belt. I will tear it down again but remove the motor next time to do a visual on the part you showed. My machine is pretty old but the motor assembly is exactly like the one in the video. I don't know the model number. Is that replacement part universal on those units? Thanks again for sharing your knowledge.

We have a new dry wash some time it work and some time I did not understanding wanted it is going on

Is it ok to leave the part that’s not broken on the shaft and just replace the broken part and the rubber part?

@timd1833

Жыл бұрын

While you have it apart, replace both parts. (I think it is sold with both parts only). Both old parts are the same age (brittle) and the "good" half may break in due time.

@susie510

Жыл бұрын

@@timd1833 Thank you for your reply. I went ahead and replaced both. Thanks so much for the great video! I was able to get my 21yo Kenmore series 90 machine going again.

please dont use the coupler with the metal on the inside . it will be the last one you ever replace on your machine . the metal coupler is stronger then the shaft of the gearcase and motor. it will wear out the gearcase shaft and motor shaft, use the all plastic coupler

My washer work, but started making noise when this spin

Please where can I buy it

What is the part called

@MoreThanMaintenance

Жыл бұрын

The part is called agitator dogs. No it’s not a joke. 😅 Thank you for watching.

Where hood switch

Mines a front load.

Water won't drain.. nevermind

We will have you