I thank you !!!!! I found your other video and my pump is fine so here I go to do this Im a widow with three of my own under age and my oldest is home with her 4 so we have 7 kids in the house and no washer or money so thank you from this grandma

Tfs great job on showing how to take off the washing machine cabin.

@da-crusherrr5907

3 жыл бұрын

Mine is filling not agitating and drains only on the spin cycle which it does. Timer is advancing but motor not starting on wash or drain! Please help me if you can! I replaced the timer and coupling about a year ago and has been working fine ???

I'm going to take my washer apart and see what's up with it. I had a repairman out today who said the problem was some gear thing, even though it still agitates and drains and that it couldn't be fixed as the part is no longer made. Mine's a mid 90's Kenmore stacking washer.dryer. I still had to pay $99 for a service call. I would gladly pay $175 even 200, and get it fixed. Thank-you. All I can do is look at it and try.

Excellent video watched it with my dad. He said yeah it was good. Thanks

Thanks Reggie...I had the old coupler and was unsure if the new one was appropriate

My washer won't drainor spin. I checked the pump and its a bit stiff but spins .. When it gets to spin on any of the cycles there is no sound at all. Already have the switch taped down. I spin the coupler by the bushing and the motor axle moves. Amy thoughts on where to look?

Thanks 👌🏿 I'll be doing the same thing to my washer machine on Friday. It's not spinning. And my clothes still wet.

What is the part number of the old part that you replaced? My washer has a tick noise wondering if it is that part ? Runs great , but just a tick noise when washing??

I have a GE washer it come ms on goes thru cycle but when it gets to spin cycle it stops and the spin light starts blinking

Followed this video to fix my whirlpool estate washer and it was successful, however I noticed a smell coming from the machine during the spin. Any thoughts? Kinda smelled like a burning smell. Thanks!

@LeanOnYourRep

3 жыл бұрын

motor coupler may not be on completely and rubbing

I have a kenmore 90 series washer the water fills up and drains but it doesn't spin. What could be wrong with it? Trying to fix it myself I took it apart and checked the coupler but it's fine.

Why don’t vacuum the area, before reinstall, very messy

Great video! Will the washer agitate normally with a broken coupler? My washer is not spinning properly but agitates just fine. My pump is clear. Wondering if I might have a sock or something between the basket and tub. Any thoughts would be appreciated!

You said not to but the washer on its side .but is it ok to do it when I pick them up to put it in my truck it's only me I slide it in then pick them up straight up ?

@HostileGingerATL

2 жыл бұрын

New washers are fine. It’s used washers that still have small amounts of water in them that you shouldn’t turn on the side. Unless you have a shop vac near by. Because any water in it, will be on the floor shortly after tilting. Otherwise, yes it’s fine to put on its side.

Why this one going to the JY? Seems like it could make a good shop machine or something for somebody.....

@LeanOnYourRep

6 жыл бұрын

Just used this machine for the video. It has a bad timer which exceeds the value of the machine so I'll take off the parts I need and will recycle the rest

Great video, thank you

Reggie how much would you charge for that coupler part have problems with draining on ipso top load washer model number is BWNBC2PP112TW01

My lady washed a big load and drum has dropped. Wouldnt spin/drain. Could it be a spring or pump problem? Or both?

Do you see many motors fail?

@LeanOnYourRep

2 жыл бұрын

yes i seen some lock up, but mostly that black switch on the motor can go bad

I've been looking on your site for this part but can't find the right page. Could you put a link on here for it please?

@HostileGingerATL

2 жыл бұрын

He charges $10 anyway. That part cost less than $5. Just Google your washers model # then use that to Google the motor coupling. Worst case scenario use your model # and call manufacturer for part number then browse Google to find cheapest site with your product.

@LeanOnYourRep

2 жыл бұрын

285753A check out the link under video description that sends you to Sears Parts Direct and plug in the part number

Hello does this Video apply to a Comfee portable washer? I just bought it a few months ago and its making a loud noise during spin cycle

@HostileGingerATL

2 жыл бұрын

Likely this or your clutch. Take it apart and check the components. Overthinking it makes it harder than it is. 😉

Does it mean I have to buy a new washing machine? It agitates, it drains well, but it won’t spin. I replaced the coupler but I still got the same result but with a burnt smell. I have a direct drive washing machine. It’s an old machine from Kenmore (110.91264100).

@LeanOnYourRep

3 жыл бұрын

Next likely suspect is: Capacitor, transmission or motor

@CrashSteve

3 жыл бұрын

@@LeanOnYourRep : Thanks for the reply. Thanks for this video and others. Very helpful. Attempting the transmission is beyond my weak skill.

$10 for a $1 part. 🤯

@LeanOnYourRep

2 жыл бұрын

Facts are important. Part actually cost me $8-$15 OEM depending on supply and demand market conditions and that's with my business discount. Not all parts are the same quality.

@HostileGingerATL

2 жыл бұрын

@@LeanOnYourRep if you we’re paying that much, you wouldn’t sell it for $10. Unless you have terrible business understanding and practice. It’s plastic. Plastic is plastic regardless of who stamps their name on it. They’re all manufactured in China and imported here then sold as private label parts. To everyone else, find your model number/part number, look it up, match it with the cheapest you can find and replace it before paying a trip charge, service fee and profit markup that all businesses have on parts/materials. Atlanta runs off scalping business models. Don’t support it. Back to page: good content either way. 🤌🏻 If anyone near Atlanta wants to buy the parts and have someone help install, I’m local. *Free of charge. But you shouldn’t need it if you follow this guys steps. 🤘🏻