Intercooler Pipe Kits available here: goo.gl/poIp0l Turbo Muffler Delete available here: goo.gl/BlFfak VAG Connector Removal Tool available here: goo.gl/pt07o7

@isaias5885

7 жыл бұрын

ECS Tuning will you guys be making these charge pipes for the Audi B9 A4?

@jonbe9

5 жыл бұрын

The VAG connector removal tool saved me time, frustration and messed up fingers removing the MAP sensor on the throttle pipe.

Watching a donut video with Zach in it than clicking on this to see him has me dying 😂

He belongs on donut media haha 😆

apparently its like watching a money pit episode for my car from 3 years ago haha

I thought i was on donut media for a second

I'd like to see a DIY video where these guys use ramps since most likely none of us have access to lifts. And good lord is that throttle body pipe an enormous pain in the ass to swap out.

laughed hard when he walked to the toolbox with a wrench on it and slumped over in a depressing manner because it was so bare. then it cuts to a different angle and 8+ tools are there

Liked this video cuz this guy just looks cool af

Yeah I didn't see the part where he got the bloody pinky knuckle just like I ended up with...these videos make it seem like a walk in the park. it takes a Tertris master to get these out of a 2017 A3 Quattro- much more cramped than the pictured engine bay. And that Throttle pipe going back on is a NIGHTMARE...lol

that's a beautiful car

For the throttle pipe.. is there a place to attach the methanol injection nozzle? like some other brands??

Anyone know the size of the turbo outlet coupler and where I can get one?

What is the OEM number for Intercooler Charge Pipe (1min to 4min) for A3 2011 2.0 crtdi cffb engine code?

Dude, why do you guys have to take my money like this! lol

Is the oem pipe plastic?

I'm Zach and this is money pit

great product I was trying so hard to fine this from u guys is this a new product..

@ecstuning

7 жыл бұрын

Yes, we just released our kit yesterday, March 9th.

@AudiA3Newbie

7 жыл бұрын

ECS Tuning well this sucks cus all I need is the charge pipes don't need the couplings I jst bought that like 2 weeks ago with the turbo muffler delete spend 259 on that and if a get the kit that u have for 299 then I'll be having extra parts..

@ecstuning

7 жыл бұрын

The couplers you have purchased are meant for the stock piping/routing. Our intercooler piping kit uses different couplers to match our charge pipes. If you are interested in purchasing our kit you should be able to sell the existing couplers you have as there is a good market for them.

@AudiA3Newbie

7 жыл бұрын

ECS Tuning oh k then make sense man I should of waited 2 more weeks and I would got these ones oh well now ima have to get them lol...Thanks for the info man...by the great products love ur store and love ur payment options also..

I have the AMS intercooler, will the couplings fit okay with the aftermarket IC?

@ecstuning

6 жыл бұрын

We haven't tested our hoses with the AMS intercooler so we can't confirm fitment.

I installed the charge pipe between the turbo outlet and the intercooler inlet. How much to tighten the hose clamps? Under full load (WOT) the coupling always comes off the OEM intercooler inlet and lose turbo boost. the flange is plastic so I wouldn't want to risk cracking the intercooler connection. Pls help.

@ecstuning

5 жыл бұрын

Very tight! Crank those puppies down. Plastic flanges should be fine.

@jonbe9

5 жыл бұрын

Thanks for responding. I did crank down the intercooler inlet coupling and ensure that there is a small gap at the middle coupling for the charge pipe. The minor problem I have now is the 2.5" band around the turbo outlet coupling. I'm using a CTS turbo muffler delete and even with cranking the band all the way to the stop limit, it still feels like it's not that tight around the muffler outlet. That said, for the time being, I'm running 5psi+ over stock (Neuspeed PM) and am worried about running WOT too much in fear that this coupling might fly off. (2018 7.5 R)

@ecstuning

5 жыл бұрын

I wouldn't worry too much about going WOT, if you do and the coupler does pop off, you just need to find a slightly smaller clamp. Only way to find out is by going WOT!

@FinalFormation

4 жыл бұрын

SH1RO 7R for what it’s worth, I ended up just using the stock clamp on the section (from turbo muffler delete to 90° elbow joint) because the supplied clamp was just a little too big.

WILL THIS FIT MY QUAD TURBO W12 PHAETON PLEASE HELP

Will this fit with the stock MK7R intake box?

@ecstuning

7 жыл бұрын

Yes, the intake would not interfere with intercooler pipe fitment.

That car is so clean you could eat off it

Will this fit a tiguan?

@FinalFormation

4 жыл бұрын

Josh Riles no

@4:59 is that a plastic oil pan??

@ecstuning

6 жыл бұрын

Yes it is! We did some impact testing vs. our stainless steel pan in this video: kzread.info/dash/bejne/oXqWptahnqmpl7Q.html

will this kit fit a car with a CTS turbo intake?

@MTA077

7 жыл бұрын

Yes, it has nothing to do with that modification.

@chrisburger1603

6 жыл бұрын

Nuespeed as well no doubt?

does it got the meth bung on the throttle pipe?

@tonysamson75

6 жыл бұрын

7

Will at fit a 2013 vw cc

@random13627

4 жыл бұрын

nah g

Donut media

Does this gain any hp or what is the difference ? :)

@KaiThouKing

6 ай бұрын

Did you noy watch the video?

Why this man seems happier in donut?

I always wonder why not metal intercooler pipes, rubber is damaged so easy

@yaz258

3 жыл бұрын

Could be heat related, rubber may running a bit cooler and also rubber gives bit more flex which good as the engine is moving whilst the intercooler is stationary.

Is this the same dude from donut lmao

@ecstuning

3 жыл бұрын

nah, the dude from donut is the dude from here

@enjoi4706

3 жыл бұрын

@@ecstuning i like him better at @donut media, good job raising him tho guys

Donut media foo