This is a really high quality video! Great lighting, and really liked all the part number and torque documentation.

Thanks to your guide I also changed PCV in my engine. Guys, buy only original with newest part number. Cheers!

Thank you for the video and all the tips. I have just replaced a PCV valve in my CJXA.

nice video. I could hear all you said and see what I needed to see. Very nice

Thank you so much for the video. Clear and straight forward

Thank you sir. Just installed my VW OEM crankcase valve in my 2015 Passat 1.8T

Just finished replacing it, thank you once again!!!

@ADVNTURR

Жыл бұрын

Awesome, glad the video was helpful

Super helpful, about to do my 2016 Passat right now, thanks!!

Brilliant diy vid, thanks for posting 👍😎

great video. Much appreciated.

Very helpful video, I am going to replace my 2019 tiguan allspace VIKA PCV

hi, i have a question about the pressure inside the tube of the oil dipstick level. I have a misfires and i have pressure inside the tube of the oil dipstick, but i think i should have vaccumm. Do you know it? Thanks! I think i have a problem with the part number of the new valve.

Question about the coil packs: What kind of tools does it take to remove it? I've changed them before and had to break the old ones and blow out the stems with compressed air. I need to do this PCV job as I'm having oil consumption issues. I'd like to to pull out the coils without breaking them and having to buy new ones.

Hello! please tell me how much oil the engine consumed before replacing the valve? And after

Hello! Thanks for the great video! Is it normal that I have these issues (that you mentioned in this video) after 41,000km? I have Skoda Octavia 2020

Is there pcv in 2.0 tdi diesel engine or is it different from petrol engine

I can’t get the bolts unscrewed on the cylinder 4 and 3 coil packs! Could someone help me

My 2020 Jetta GLI with an EA888.3 has the same exact PCV valve system and is starting to show signs of failure at 66k miles. I did follow the steps in the video to remove the factory installed PCV. However, the PCV body atop the valve cover is not coming off of the valve cover despite my best efforts. It is behaving as if it is stuck/vacuum sealed to the valve cover even with all seven T30 bolts loose and all outlet hoses detached. Has ADVNTURR or anyone else who conducted this repair experienced a PCV that is stuck to the valve cover? If yes, what was your strategy to remove it? I am doing everything in my power to avoid prying on the PCV to avoid damaging the mating valve cover surface and other surrounding parts. Any help is appreciated!

Thank you for the video. Very helpful! Can you tell me if you had reduction in oil consumption or did any of your other issues get better?

@ADVNTURR

Жыл бұрын

Unfortunately, I didn't notice a change in my car's oil consumption after changing the PCV (~1qt/3k miles), but it definitely did not get worse.

hi its same thing with gti 7 cs?

Hi, did it help with your oil consumption? If so what was the before and after?

I saw on another comment that it eventually started consuming more oil again. Are you looking at valve seals now? My 2020 Tiguan is consuming a lot of oil recently and I'm afraid that's what I need to fix.

Just had this replaced under warranty on my atlas because it was stuck and blew out seals. In the future, how do I know when this needs replaced before problems occur?

@psiturbo

10 ай бұрын

Remove the oil cap from the valve cover and it should have a slight vacuum, do this with the engine is warm for best diagnosis, review. Pull the oil dipstick, the engine should drop rpms and run slightly rough. I would check at least on every oil change. It is bad when: Way too much vacuum Pressure going out when removing the oil cap and there is no rpm change Remove oil dipstick and no rpm change

Muy buen video!!! Tengo una duda con mi mk6 gti,me sale fallo p0171 y haciendo priuebas,si con el motor en marcha abro wl tapon de aceite se me para,hay mucha succion,crees que puede ser la pcv???? Muchas gracias

@axelortiz1606

5 ай бұрын

Si es

@darwincollado8993

3 ай бұрын

esto indica que mucha problablidad que el pcv esta descompuesto

this can cause consuming oil in big quantities? . I have to add oil every 2 weeks, if not the motor start cranking.. this pcv replacement will help to avoid the oil burning?

@ADVNTURR

Жыл бұрын

The PCV can cause oil consumption. It can also lead to rear main seal leaks because of excessive pressure a failed PCV can cause in the engine. With the amount of consumption you have, I am not sure that the PCV is the cause, but it is a fairly easy part to replace and test. You may also want to look into a compression test or you may want to pull your intercooler pipe to see if you have oil in your intercooler which wouldbe a sign of a turbo seal failing.

my 2014 golf 7 r doesnt have the grounds on the bolts for the coil pack is this normal?

@ADVNTURR

4 ай бұрын

I've seen other cars without external grounds (my 350Z), but I would have assumed all MK7 EA333 motors would be the same unless something was done differently on the very early cars.

Could the white smoke coming from gassing be due to this part?

@ADVNTURR

Жыл бұрын

Some white smoke on initial start could potentially point to the PCV, but if you are running E85 or some other high ethanol content fuel it could also just be due to the higher water content in the fuel working its way into your oil with blow-by. If you have large amounts of white smoke you need to check for coolant in your oil or oil in your coolant because white smoke can often point to a failed head gasket.

Do you have to replace the whole valve or can I remove just the spring & cover?? Thanks..

@ADVNTURR

9 ай бұрын

To the best of my knowledge, the spring and cover are not serviceable. The entire valve is the service item and is designed to be replaced as one piece.

Can a faulty pcv cause oil leak beacuse of pressure?

@ADVNTURR

10 ай бұрын

Yes, I have been told that it can cause the main seal on the crank to leak due to the increase in crank case pressure.

How'd you get that hose in the left side off?? I'm currently on that already removed coils 3-4 and loosened all the screws on pcv

@ADVNTURR

5 ай бұрын

I'm assuming you're trying to remove the spring clamp side like I did. Once you move the clamp down the hose (move it all the way to the crimped on on the right side of the hose to give you as much room to work as possible), you can use a small flathead screwdriver to start working the hose back off the nipple. You can also try to use a pick, but you have to be really careful not to puncture the hose.

@drouxbag94

5 ай бұрын

Got it! Just needed to set my purse down! 😂thank you so much almost all set now just putting grounds back

@drouxbag94

5 ай бұрын

All set she's driving good now thanks again!

нормально объяснил .

Change PCV valve and also flushed it engine oil

Should this replacement be done every 60k miles to prevent oil leaks?

@maurotoscano8273

Жыл бұрын

Yes bro! every 60k

the car had some engine codes?

@ADVNTURR

Жыл бұрын

In my car's case, I did not have any codes. I was simply noticing an increase in oil consumption and the PCV was an easy and cheap part to replace.

@zzzzzzzsssss

Жыл бұрын

@@ADVNTURRand it help the oil consumption?

Can change my valve within 6 minutes

Did this help your oil consumption issue?

@ADVNTURR

4 ай бұрын

It seemed to help for a little while, but I think my problem is bigger than a PCV valve because I am back to where I was before the install.

@doejon

4 күн бұрын

@@ADVNTURR Hello, have you found the root cause

@boostin1713

3 күн бұрын

probably valve stem seals

God damn that was tedious to watch