Adam you are a top man for posting this video. My 2015 BiTurbo had this fault at 20,000 miles and was fixed under warranty. Its happened again at 45,000 miles. My fault is exactly what you describe, and I have whipped off tge sensor, shoved a long piece of wire down the pipe and pulled out loads of black crud. I also pushed a bicycle brake cable down it aswell. I reconnected it all and went for a blast. Initially, the error was still there, but after a few miles it cleared. Doing videos like this is what helps others with similar problems, so well done. Cheers.

@adamcooper7677

4 жыл бұрын

No problem at all. It definitely appears a common problem

@amjedmahmood8324

3 жыл бұрын

It's hard to take the pipe out it's fitted to the manifold need to dismantle few things from the bottom to get eccess to the pipe

@studentu05

7 ай бұрын

Oh man.... Thanks for the detailed steps. I've got the same issue at only 43k. They said that is the EGR and all together will be around £1k to fix. I'll check this sensor today.

@gareththornton3917

4 ай бұрын

Great video, I've got a vivaro got the same problem, need to get one

This is what's good when it comes to KZread. Thanks for taking your time to put the video up, I even got a great tip about using a bikes brake cable to get the stubborn blockages clear from the pipe. Many thanks.

I don’t usually take my time to comment on videos, but I do have to thank you for helping me figuring out this exact problem!

Thanks for the video! It saved me from a trip to the garage. I had the same errors, but luckily enough my sensor whas still good. I cleaned out the pipes and replaced the little rubber hose and now it runs perfect.

Same problem with my 2016 Renault Trafic on 42000 miles. I had Check Injection System , Check Cruise Control, Check Anti Pollution System and code 0470, Exhaust Pressure Sensor A Circuit on my £14 Ebay code reader. I was a bit doubtful about this fix so went the cheapo route of buying an £11 Chinese copy of the sensor off Ebay. Surprise surprise! Code and warning messages all gone! Absolutely delighted. Keep on making the 'boring ' videos. Many thanks for going to the trouble of posting this.

@adamcooper7677

4 жыл бұрын

So happy this has helped you to. Maybe you could add an ebay link to the sensor to help other people out. I lost the the link to the one i purchased 😫

My 2015 has exactly the samre problem, thanks very much for this video. Saved me a few quid

Thanks for this man, just ordered the part will hopefully sort the issue x

Thanks for the help found the small rubber pipe had split on mine happy days a++++ on the video

Well done Mate for posting this up because i had exactly the same problem with my Bi turbo and you saved me a fortune . . THANK YOU

@andywilkie1986

Жыл бұрын

Was yours down on power when fault?

Just found your post . Just had the same this morning . Thank you

Hi mate, Great video, I removed mine today but the sensor was surpisingly clean & intact & hardly any gunk came out the hose, I ordered a new sensor last night & will fit anyway to see if my warnings go away, keep up the good work.

I had the same messages on the dash. Local garages wouldn’t touch it. Main dealer wanted £100 to diagnose the problem. I gave them the DTC codes but they wouldn’t give out the information 😡 I bought the sensor as recommended here and cleaned the pipe, which was blocked and the check messages have gone. Brilliant! Thanks for the video. Saved me £400

@adamcooper7677

2 жыл бұрын

Glad it helped 😀

@andywilkie1986

Жыл бұрын

@@adamcooper7677 was your van down on power when faults were showing?

I’ve had this exact problem for over 18 months, countless garages and different solutions to which none have worked. I’ll be trying this first thing tomorrow morning. 🙏

@adamcooper7677

2 жыл бұрын

Let me know how you get on 👍

Great video. Thanks for putting it out. My blockage was further down the pipe. Beyond my skills to replace the pipe. Persevered with brake cable in a drill. Found that running drill at high speed cleared it. Took a while though. Pipe appears to be about 9-10” in length so that’s how far you need to be able to get a cable in.

Cleaned mine out and it worked, thanks Adam

Cheers for solving this, 15 plate here same issue. Avoid the stealersships at all costs. 👍

My 2016 Trafic has exactly the same problem, Sorted thanks very much for this video. Saved me a few quid

@adamcooper7677

4 жыл бұрын

Really glad this was of help

Just sorted my 2016 renault trafic thanks to this video. I was getting the same message on display , took the sensor off which seemed in good condition , cleaned the pipe with a drill bit and reassembled , hey presto no more lights or messages. Thanks for the help 🙂

@adamcooper7677

3 жыл бұрын

Brilliant. This video has helped far more people than i ever expected it to. Must be a common problem for sure!

@neilcarter3621

3 жыл бұрын

@@adamcooper7677 I cleared loads out of mine and all I used was a drill bit , carburettor cleaner and a metal kebab skewer 😂

@adamcooper7677

3 жыл бұрын

@@neilcarter3621 have to remember that! Ill use that on mine next time 😂

Top man The pipe was blocked solid,used a small drill bit to start with then a length of wire to clean,no parts needed and warning lights all off many thanks💯👍

@mrloftys

Жыл бұрын

And average mpg gone up by 10 👍

You’re a legend mate. I had the same issue at 45k. Put it in for warranty work in and it seemed fine until 75k. Lights came on etc. Just did the fix you did and it’s now back to normal with no dash lights. I hope you read this so you can accept my thank you!!

@adamcooper7677

2 жыл бұрын

I'm glad this video was of help to you and so many other people. Common problem for sure!

@jimmydraper9209

Жыл бұрын

How did you remove the metal clip from the black rubber pipe connected to the metal tube

@edwardtout5064

Жыл бұрын

@@jimmydraper9209 probably too late now but I actually used a flat head screw drive to unclip it. However, didn’t have the correct tool to re fit it so bought a new hose and hose clipped it. Hope that helps. PS, fix is still going strong with nothing else coming up. What a result

Good man, I managed to sort the same issue with your advice. The garage couldn’t sort it after 3 days. The clips were a nightmare to get off but apart from that it was straight forward fix. Very much appreciated mate, thanks

@craigroberts9644

2 жыл бұрын

How did you get the clips off mate want some advice before I give it a go

@Utdmanutd1

2 жыл бұрын

@@craigroberts9644 basically had to bend and break them off with a pair of long nose pliers and flat head screwdriver, absolute pain. I replaced them with 2 fuel line jubilee type clips

@craigroberts9644

2 жыл бұрын

@@Utdmanutd1 cheers mate

I’ve had three of these vans, two of them have said the same thing, they seem to be a common fault, thanks for sharing this as the Vauxhall garage I went to in Chislehurst was changing all different parts, telling me that it’s because someone is using cheap adblue (they didn’t have a clue). It was an expense to the company I worked for at the time but now I I have my own van so will give this a try 👍🏽

@adamcooper7677

3 жыл бұрын

Cheap add blue 😂😂😂

Thanks for this Adam. Saved me a big bill.

@adamcooper7677

4 жыл бұрын

No problem. Glad this was of help

Top man I just did what you said and fault light clear straight away cheers buddy 👍👍

Cheers fella.. had this problem with my 2014 vivaro.. garage couldn't work out the code to sort it was going to take it to vaxhall before I found this video.. got a senior on order 🤞 thanks again 👍

@yikeware2504

4 ай бұрын

Why are garages so useless with diagnostics??

Fab, just took my sensor off and the bottom bit that sits in the rubber hose had corroded into a mush and blocked the rubber joint hose & top of the metal pipe.... new sensor from eBay and carb cleaner down the metal pipe, and used a cable from a bike brake inner to clean the inside bore.... put back together replaced original clips with stainless jubilee ones 12mm - 9.5mm got rid of fault after clearing codes - took it for a 10-mile blast to regen, which can now happen as orange engine light has gone... sorted!!! cheers Adam :)

Awesome mate. Common recurring problem. The trouble is, most garages haven't a clue and will try to diagnose by replacing various different parts. I've heard of bills over £1k!

Thanks mate, I had the same fault yesterday, I just took it off, cleaned it and sprayed carb cleaner down the pipe and it fault went off. I may have to re visit but at least I know where to look. Thanks Dai

@jimmydraper9209

Жыл бұрын

is it ok to spray carb cleaner down the pipe I can't seem to move the blockage

Tried this out on my 2015 Vivaro with this problem, the pipe was full of crap and so was the sensor. Cleaned the pipe and sensor still no joy so ordered the new sensor and all was good. Thanks a lot for this video saved so much money not going to the main dealers.

Thank you so much for this I'm trying it tomorrow..

The same problem in my case sensor replaced but still same issue on the end after this video I've cleaned the tube and looks like it's OK now thanks buddy very helpful video 😃

Had same message! 2 dpf cleans 4 re gens new dpf sensor still same message, watched this video bought the air vacuum sensor £30 sorted!! Thanks Adam

Awesome It works a treat saveed me some money there pal Didn't change the sensor just cleaned the pipe. Bit awkward to get a drill bit it as the angle it tight . I used some 2.5mm earth cable . .

@adamcooper7677

3 жыл бұрын

Awesome! Glad you sorted it

Thanks Adam the pipe was totally blocked on my vivaro van the pipe was too long and bendy for a drill but used a piece of pushbike cable with end slightly splayed attached to a drill and carb cleaner to clear carbon worked a treat. Now waiting for new sensor so fingers crossed has done the trick. Thanks for your advice

@adamcooper7677

2 жыл бұрын

No problem.. might try that myself next time!

Thanks for the video. My Gfs Trafic is fault code free again thanks to you. Robert from Sweden

@adamcooper7677

3 жыл бұрын

Really happy to help.

@1971dave

3 жыл бұрын

@@adamcooper7677 I thought they came with a 4-year warranty, we've had renaults for over 15 years, never had Vauxhall,

Thanks for this saved me a fortune

I have the same problem so will try tomorrow thanks for the video regardless 👍

Thanks man, You saved me hundereds of pounds by making this video

going to look at mine tomorrow as having the same issue, looking at the comments you have saved thousands of pounds for people, nice one

@adamcooper7677

Жыл бұрын

Think i might open a just giving account 🤣

@johnob1824

Жыл бұрын

@@adamcooper7677 😀

@johnob1824

Жыл бұрын

@@adamcooper7677 is there much of a vacuum or blow off from that metal hose

@adamcooper7677

Жыл бұрын

@@johnob1824 it should blow if you rev the engine

Adam your a life saver thank you very much dude 👍😉😁

Thumbs up :) I had a fault on my 1.6dci on a Scenic. The tube was blocked with soot :o Cleared it and all OK now. I also had a quote for 500 euros !!

@adamcooper7677

4 жыл бұрын

Yes they don't mind robbing you for what is essentially a simple job

@MersyyLife

3 жыл бұрын

@@adamcooper7677 did you test it having just cleared the pipe? Did you drive any sort of distance? My work van is doing the same and it's driving me insane as it almost starts rolling backwards on the tiniest of hills!!!! My work won't spend any money on it so I need a cheap fix Cheers

Definitely giving this a go mate, thanks

Great post...dealer replaced sensor and pipe 18 months ago under warranty...failed again this week... I removed the sensor and cleaned out the pipe with a bicycle brake cable....works a treat...I have replaced the hose clips with spring hose clips to speed up the process as this seems to be a common fault as I have only done 14k miles since the last repair.

@eddbanks1215

Жыл бұрын

Update....blocked again.... couldn't clear it with the bicycle brake cable so added a length of tube to the metal pipe and filled it with DPF cleaner...left it to soak over night then attached the brake cable to a cordless drill and slowly drilled through the soot ... emptied a load of DPF cleaner down the pipe and it's cured again...what a crap design .

@daltropical5236

Жыл бұрын

@@eddbanks1215 what model u got? Ive just acquired a renault master 2013 build...believe i have the same issue..getting emmisions and injection reading on dash....but the sensor is in a prick of a place...not as exposed as on this vid..good luck any tips appreciated

@eddbanks1215

Жыл бұрын

@@daltropical5236 sorry I'm not familiar with the Master , but if it has the same 1.6l twin turbo engine I imagine this will work

@eddbanks1215

5 ай бұрын

I've seen that people are asking if you have any inclinations that the pipe may be blocked before you get the warning messages on the dash?.. In my experience the van develops a shudder when accelerating (as if the engine is slightly imbalanced) and within a few days the dash messages appear.

Excellent thank you for your video

Came here after i have been told its injector fault ! Surprisingly it was the anti pollution system . I lost trust in all the garages.. thank you for posting this Adam .

@adamcooper7677

4 жыл бұрын

Hi. No problem at all. Always good to help others... i know how frustrating it can be!

Nice one, thanks for that 👍👍

Thanks for the video and explanation

Brilliant video. just cleared the pipe on my 2018 vivaro, it was blocked solid. I was getting check injection and check anti pollution system on the display. re fitted the old sensor which was a bit damaged on the tip but still works ok as warning lights have gone now👍

@andywilkie1986

Жыл бұрын

Were you down on power when fault was showing?

@TD-if3dr

Жыл бұрын

@@andywilkie1986 I didn't notice any loss of power

@andywilkie1986

Жыл бұрын

@@TD-if3dr mine is like the turbo has not kicked in and when I'm driving it won't pick up speed as it should like a strange limp mode

@jordangiles9401

Жыл бұрын

@@andywilkie1986 that’s what mines just done , have you had any joy ?

@andywilkie1986

Жыл бұрын

@@jordangiles9401 yes mate split in intercooler pipe

Renualt Trafic 2016 sport crew 75k on clock. So, I tried a cheap sensor of Amazon (£25ish) and cleaned the pipe with a bike brake cable and rev the balls of it. Nothing really came out. Warning lights where intermittent for a month or so, then stayed on permanently. Took it to a Renualt specialist back street garage who agreed after speaking to someone at main dealer that pipe and sensor needed replacing. But he didn’t want to do it as it was ‘a pig of a job’ to get to and remove the pipe. In the end, I had to bite the bullet and take it to main stealer! Part number Sensor £142 Pipe £103 Total was £321 plus VAT Took half a day to do. (Along with some other work I had done) So far, 1 week later, no lights returning. Thanks again for the video, I guess I was unlucky but I thought I’d share my story just in case it helps someone.

@adamcooper7677

3 жыл бұрын

Thanks for telling us that... i guess sometimes the pipe might be a little to blocked... my light has started flashing again so I'm guessing mine might need some more work very soon!

@tedblight

3 жыл бұрын

@@adamcooper7677 makes you wonder if in another 50k we’ll be back in the same situation!

thanks keep posting

Great video pal! I got £200 bill last year new sensor and cleaned out the pipe(they wanted 230 for new pipe lol) . Lasted about a year came back on 2 weeks ago I'll give the clean pipe myself now you showed me where it is 👍

@adamcooper7677

4 жыл бұрын

Excellent news. Let me know how you get on

@dalemoore11

4 жыл бұрын

@@adamcooper7677 bitch getting that bottom metal clip thing off lol, used 3mm drill bit and some brake cleaner got some shit out twice then 4inc down the pipe and sprayed cleaner again ran the engine 4000 revs put back together still got lights on, I'll give it a drive tomorrow see if it moves it. Update ya then👍👍👍

@gunnermike76

4 жыл бұрын

@@dalemoore11 mine was clogged with soot right near where the pipe is mounted to the manifold. It's way after the little rubber pipe. Whem I ran the engine with no sensor there wasn't even any smoke coming out. I took the whole pipe out (a real bugger to get to, and mine is a dci130 single turbo, not the twin like you) and cleaned it. I then had to erase the fault with diagnosis tool or the fault would stay.

@dalemoore11

4 жыл бұрын

@@gunnermike76 sounds like mine is clogged further down 2 mate, where does the pipe go to? Not sure where I can buy 2nd hand pipe and get garage to fit.

@dalemoore11

4 жыл бұрын

@@gunnermike76 just looking on amazon 3mmx400mm aluminium wire, do you think that could go down pipe bend and move the shit down with some brake cleaner?

another good clue to our fault on our van. the check anti-pollution system failure and a check engine light. the car does go short runs often so it can also be a blocked dpf(atleast i think so, but hey im just a carpenter :D).

Also the van is driving perfect

Just wanted to drop in and say thank you for your video, I stumbled across it while searching for the same fault codes. Removed sensor from my Trafic 3 which has only done 22000 miles and it looked exactly like yours! After ordering one off eBay and cleaning the pipes/changing sensor all fault codes cleared and everything back to normal, if anyone else has problems cleaning the pipe that goes down to the exhaust manifold I found an old bicycle brake cable was perfect, after clearing around 30mm of hard carbon with a drill bit I found it went soft and gooey and the brake cable removed to gooey stuff right down to the exhaust. Thanks again fella! Saved me more than a few bob! I owe you a pint 👍🍺

@adamcooper7677

4 жыл бұрын

My pleasure. Really glad this has helped you. Very satisfying when it all comes together 😀

@adamcooper7677

4 жыл бұрын

Invoice will be in the post 😂

@gavalarbellz5019

2 жыл бұрын

Hi jason if you blow down this pipe would it blow clear in to exhaust ? And what sort pressure comes out of it? Think mines blocked Solid

@JasonSmith-gc7ey

2 жыл бұрын

@@gavalarbellz5019 hi Gavalar, yes any crap will blow into the exhaust, there is still some pressure there but you should be able to blow at least some air into it, the carbon deposits do go very hard and take some clearing, just keep spinning a wire brake cable in there and removing it often to give it a clean, you’ll get there eventually 👍 since I did mine I’ve used 6in1 diesel additive with every fill and tried to avoid supermarket fuel, not had any problems since 👍

@gavalarbellz5019

2 жыл бұрын

How far down isit to the exhaust rougly so ino if the cable going far enough gna try this tomro morning

cheers Adam, i just had the same problem, my neighbour gave me a bike brake cable to clear out the pipe.

@adamcooper7677

5 жыл бұрын

No problem at all. Did it fix the problem? Thanks. Adam

@gregcase1815

5 жыл бұрын

@@adamcooper7677 ATM, it seems so only did it today

@gregcase1815

5 жыл бұрын

i didn't change the sensor, just cleared the blockage

@adamcooper7677

5 жыл бұрын

@@gregcase1815 ohh good. Lets hope that has done the job then!

Thanks Adam!

brilliant stuff thank you

I change the sense and then got it regenerated and then it worked perfectly and it was coming up check injections and stop start and anit pollution filler 67 reg vauxhall vivaro 1.6 eco bio 45000 miles

Just had the same problem today with Renault Trafic 2018 (33,000 miles). I'm going to have a look at the sensor tomorrow, hopefully it's the same easy fix.

@adamcooper7677

2 жыл бұрын

Hopefully. Let us know how you get on 👍

@c.m.4078

2 жыл бұрын

removed the sensor, cleaned it, (black dirt came off from inside ) but it's the same. I ordered a new one from eBay.

Cheers for the information, I have a 2014 vivaro and I've just had the same faults come up on the dash. I'll let you know how I get on cheers again

@adamcooper7677

Жыл бұрын

Thanks. Be good to know if it works for you

Does the rubber bit on the bottom need to be removed from the sensor when fitting it?

Running 2 vivaro nothing but trouble money pits on going with seized injectors at moment living the dream honest good vid though m8

@adamcooper7677

3 жыл бұрын

I feel your pain. Had new gearboxes.. new injectors you name it!

@adamcooper7677

3 жыл бұрын

Not on this van.. my old vivaro and trafic

Thanks a lot for this upload. Same problem with my Vivaro, though it has only done 20k miles ! The block was so bad i had to use a flexible drill bit adapter and drill out the blockage, absolute nightmare getting it all out. I wonder why this happens and can only assume it is going to get blocked up again. Might be worth while taking the pipe off at service intervals and give it a quick clean to keep it clear. Thanks again.

@adamcooper7677

4 жыл бұрын

Hi Glad my little video is of help to you. That is a very good point. I'm not to sure why they block up or how easy it is to even take the pipe off. Main dealers quotes quite a bit to fit the new one

@adamab83

4 жыл бұрын

@@adamcooper7677 Yeah the pipe connects to the exhaust manifold, would leave that where it is and just take the rubber pipe at the top off and give it a quick clean with a small pipe brush. I guess if the block was bad enough the whole thing would need to come out. Hope this never happens.

hi adam ,i have vivaro 2015 and i got same sign ,show check injection system , it's does effect the power ?bcz van not getting enough power .

How do you actually take off the valve from the bracket. I've tried with adjustable spanner but don't want to break anything. There is slight play on the bracket, not sure if you just knock it out. Thanks

renault trafic 2.0 115 2012 i had the same problems, emission fault and eventually check injectors, it would cut out at 2500 rpm and struggle up even gentle inclines, i simply took it for a 10 mile run on dual carriageway, normal revs not revving the tits of it, and eventually it cleared, just lucky i guess. Thanks for the vid, i was getting geared up for this repair and just thought i would try the easy way out.

@eamonomalley1815

2 жыл бұрын

same problem back again 8 mths later, time for spanners

I have the same message, thanks for sharing this I'm going to give it a go.

@adamcooper7677

5 жыл бұрын

No problem. If i can be of help let me know. Let me know if it fixes it 😆

@jamieking4956

5 жыл бұрын

Hi Adam, I finally got round to changing the sensor. Unfortunately my messages are still on my dashboard. The pipe doesn't appear to be blocked, I managed to push a copper wire down through about 4 inches or so. Do I need to reset anything?

@adamcooper7677

5 жыл бұрын

@@jamieking4956 Hi Jamie. I personally never had to reset anything but if the sensor is faulty clearing the problem won't sort it you will likely need a new sensor to. Thanks. Adam

@Geoffinfinity

3 жыл бұрын

@@jamieking4956 Did you sort it??

I'm having an issue just now with the same fault codes and the garage cant find a cause did you have any loss of power with the fault or just the warning?

Mine was a faulty EGR. Replaced under warranty then the EGR cooler went shortly after it. The tell tale sign of the EGR cooler failing is a whoosing sound under acceleration, like the boy racer cars dump valve. It is a real expensive job.

Hi Adam having similar problem with my van the pipe you cleared with drill bit should i be able to blow down it? Isit open the other end? I tryed put a small pipe over top off it an blow down it but wasnt able to blow down it was to hard. Is there valve other end or something?

I did mine.. it’s a piece of piss.. I used a brake cable on the end of a drill to clean my pipe out.. didn’t need to change the sensor either. Only cost £4 for the brake cable 🥳🥳🥳🥳🥳

Any idea where the coolant temp sensor is located on the 1.6?

Hi just wondering, how is this fix holding? Any further warning messages or did this completely fix it? Many thanks for this video, Ive not done much van or car fixing in the past, but Im going to try this I think.

Now its been a while since you changed the sensor, has the fault been cured? Having the same issues, there appear to be a few remedies out there, was wondering if this worked aswell as you hoped? Thanks

Nice vid you can poke bowden cable down the pipe to unblock it

Hi adam what was the van running like? I have a similar problem with check injectors message with spanner light that pops up. I had someone look at it they are saying it could be the turbos?

i have same issue with check lights. i just ordered the new sensor. I will replaced tomorrow. hopefully it will be fixed. fingers cross

@thedentons50

Жыл бұрын

Hi alin did it sort it ?

Hi. I need to check my boost sensor. How is it removed? Is it held in with clips?

Could anyone tell me where to get this part from please

Thanks for posting this. Do you know what code came up from obd? I have 'Check Anti Pollution System' warning and engine light is on - getting code p0470 on obd reader which corresponds to 'Exhaust Pressure Sensor A' so seems like the same thing

@adamcooper7677

4 ай бұрын

Hi. Honestly I can't remember as this was quite a few years ago now but sounds like the same thing to me

Hey man, the part arrived.... I couldn't unclip the multiclip or get it out of the small pipe? it seems to be the other way around on a traffic... any advice?

How do you actually remove the sensor? Can’t find any guidance on how this is done and this video doesn’t show either. #update - the pinch clamps on mine are "use once", so had to snip them off. I have replaced the sensor and refitted everything and have used different clamps to reattach the hose to the sensor. Interesting to note that the old sensor had next to no crud inside it (after using a tiny drill bit) and nothing down the pipe in the engine bay. Anyways, the new sensor is in however both the engine management light and spanner light are still lit on the dashboard. do I need to take the van for a run and then it will go out, or is there something else I need to do?

Hi I have a 2015 Vivaro and it’s just come up on the dash , “ check injection system “ would this be the same sort of thing I’d be looking for , although it’s not BiTurbo ? Cheers Dean

Hi Adam, thanks for the video, how did you get the little black pipe off the other end from the sensor? And is it ok to turn the van on without the sensor connected to see if it is clogged up or not?

@tradingco2830

Жыл бұрын

Awaiting reply......

@clarkie005

Жыл бұрын

Yes running it without the sensor in the pipe will tell if it's still blocked or not. You should be feeling the exhaust through it which is normal. If not it's still blocked.

I have same problem on my 2018 vauxhall vivaro diagnos come up with cylinder 3 injector control circuit-open been advice to change the injector should I change it or try this first any suggestion please

i have the renault version of this van, and its at renault to see if they can find the fault, under warranty, when mine did that the revs died with the engine nearly cutting out, with no power in the engine, then when i turned it off and on it ran as normal, mine has only done 26k miles, i am hoping they sort it this time, good to see the possible cause though.

Thanks for your video,had this problem twice now but been to garage to get it solved ,over £100 each time ,but it's a big but !,how do you no when the engine is regenerating ?

Not boring. A lesson in how to save vast amounts of dough !?

I have also the emissions fault and an intermittent injection fault … I am wondering if it is same problem !

Top man

Your link doesn't seem to take you to the correct part . Can you clarify ? Also can you demonstrate the full removal process including tube?

What’s the name of the part you have put in am having same problem

Hey man nice video ....I'm into this right now .....how did you remove the exhauste pressure sensor? My one does not have a clip do I need to twist? Many thanks in advance

I've just found this video as I'm having the same fault message. I'll have a look at that tomorrow.

@adamcooper7677

4 жыл бұрын

Let us know how you get on.

@marjoboost

4 жыл бұрын

@@adamcooper7677 Done the pipe clean out today and it was full of black gunk. I didn't change the sensor just clean and reset malfunction light, so far so good. Thanks for putting this up.

@grzegorzziomko4818

3 жыл бұрын

@@marjoboost hi how you clear this pipe?

@mirceaona5765

3 жыл бұрын

@@marjoboost how you cleared the pipe?? Mine is blocked at the bottom..

i have a same problem before, and i used the injection clearer , also can fix it😊

Great video. Got the same problem on my Trafic. How did you get the clips off the pipe? Can’t shift them on mine

@andrewgould9395

2 жыл бұрын

Same here mate, I can’t release them nor can I get the sensor to release

Does this fault also limit power intermittently?

Could you put up part numbers of the sensor and pipe please amazing video thank you top man

Great video. Do you know if the pipe you cleaned out connects to the dpf the other end? Thanks

@adamcooper7677

Жыл бұрын

Thanks. This was so long ago that i can't really remember 🤔

What was the performance of the van like with this issue? I am having a mare at the moment. Large turbo will not boost. Both turbos have been refurbed... really strange. I'll take a look at this tomorrow to see what its like

@adamcooper7677

2 жыл бұрын

Hi. The performance was not affected from what i can remember.. odd about the big turbo🤔