No video
Veepeak OBDCheck BLE & BLE+ Setup Guide with OBD Fusion
How to set up Veepeak OBDCheck BLE/ BLE+ with OBD Fusion iOS App
1. Get OBD Fusion App from App Store (requires separate purchase).
2. Locate the OBD2 connector in the car and plug in the OBDCheck BLE or BLE+.
3. Turn on car ignition (no need to start engine).
4. Enable Bluetooth of your iPhone or iPad, and make sure VEEPEAK shows up under Other Devices. Do not connect here. No need to do anything here.
5. Start OBD Fusion App, go to Settings - Preferences - Communications - Type and select Bluetooth LE. Go back and click “Connect” button.
6. When it’s connected, you can:
Click “Dashboards” to view all kinds of sensor readings and add the gauges you want to monitor.
Click “Diagnostics” to read & clear engine trouble codes.
Пікірлер: 21
I got the BLE on my ford focus mk2 but I dont get fuel consumtion information. How can I get this activated?
@youngjohn3842
2 жыл бұрын
Usually you need to complete your car profiles in the app settings.
Will it start automatically when car ignition switch on or you have to manually remove and plug back in dongle every time?
@youngjohn3842
2 жыл бұрын
It depends on whether the app supports this. You do not need to manually remove and plug back in every time in order for it to work.
@clayton4115
2 жыл бұрын
@@youngjohn3842 yes thanks I bought this and you do not need to manually plug it back in to make it alive again, my other one goes to sleep after 30 mns and had to unplug and plug it back it to make it work, this doesn't need to do that.
Nothing like connecting your OBD reader while overheating at 116 mph whilst maintaining 93 mpg... Obviously it seems not to work correctly.
Veepeak is this peak the coolant brand ?
@youngjohn3842
3 жыл бұрын
Veepeak mainly features OBD products.
OBD fusion app subscription is it yearly or monthly?
@youngjohn3842
2 жыл бұрын
No subscription needed. It's a one-time purchase.
the one gauge I need is not there, trans oil temp, how do I get that to display please?
@youngjohn3842
2 жыл бұрын
It's a manufacturer-specific PID; what vehicle do you have?
@FRERABRETZ1
2 жыл бұрын
@@youngjohn3842 hello there Young John thank you for your reply, my car is a 2010 150 Prado
@youngjohn3842
Жыл бұрын
@@FRERABRETZ1 OBD Fusion app with Toyota add-on, or Car Scanner ELM OBD2.
What is the diffence between the BLE and the BLE+?
@youngjohn3842
2 жыл бұрын
The BLE+ supports more AT commands in higher ELM327 version.
@cocaman1345
9 ай бұрын
@@youngjohn3842and this means?
Is this accurate ?
@youngjohn3842
Жыл бұрын
Pretty accurate.
7$ they app lol
Waste of money!!!!