V8 solenoid engine, 3D printed with throttle controll and autostart. Final video
Тәжірибелік нұсқаулар және стиль
This engine is constructed with 3D printed parts. It is designed using Autocad 123D and printed on an Ender-2. The solenoids are Arduino controlled, with Hall sensor crankshaft position pick up. Main power to the solenoids is switched with MOSFET's in the 'cilinderheads'. It has an auto-start sequence, and speed is controled with a 'gas pedal' in the panel. The crankshaft took two attempts. The first one was completely 3D printed, but turned out to wobbely. The second, still printed side pieces but now with brass shafts and pinn's, was succesfull.
Parts used:
8x JF-0530B 12V solenoids
2x Arduino Nano (1 dedicated sensor read and timing control, 1 for the display's)
1x ACS712 Amp sensor
4x SS461A latching Hall sensor
8x LR7843 MOSFET's
8x SS310 Diode
2x TM1637 LED display 4 digit
6x bearing 9x5x3mm (crankshaft)
8x bearing 7x4x2.5mm (connecting rods)
5x M8 nut (flywheel weight)
1x Oak wood base
Several pieces universal PCB board and connectors
Various resistors, wiring, M3 Allen bolts,
3D Printed parts:
Engine housing
Crankshaft (connected with brass shafts and pins)
Connecting rods
'Piston' connectors
Sensor parts
Cilinder heads (MOSFET covers)
Flywheel
Panel
Throttle pedal
Detailed buildlog available at Modelbouwforum.nl: www.modelbouwforum.nl/threads... . This is In Dutch, but with lots of pictures.
Пікірлер: 28
It sounds like a 1.9 TDi. Cool
this is so beautifully done
Perfect Lex.
Well done !!
Very nice job! Can you share de 3D STL files?
Wow, sehr cool !!
That's great, I want to buy it!
Some Freevalve technology going on there
That is sick
absolutely amazing project. it would be very helpful if you provide the timing code and stk files?? cheers from india!!!
Very cool. I love that sound. It would be great if you put the 3D files on Thingiverse
I must. Haha Props! Thanks for sharing this!!
A coisa que eu mais gostei é que daria pra ter ligado as bobinas uma vez por volta que daria mais potencia igual um motor 2 tempos mais voce fez questao de ligar cada bobina de acordo com o tempo de ignicao de cada cilindro e isso fez toda diferenca no som do motor meus parabens
I 've been trying to make this for a long time. Please give me the code and diagram.🙏🙏
Try to imagine a sound of it engine at 8000 RPM
@TheChromePoet
2 жыл бұрын
It would probably sound like a real supercar.
@roshanpereira7650
Жыл бұрын
This engine needs some serious greasing first of all and a heavy 1kg metal stabilized flywheel to run at that speeds
amigo quanto de força um motor desi tem
Is it possible to buy the files?
Can I buy this please?
Sound like a real American v8 with the engine knocking.
🥳🥳🥳
hey love the project and how it has turned out, just have one question as im currently working on a small engine project of my own, is there any chance i could get my hands on the code you are using for the engine timing as it may be suitable for the pneumatic engine im making?
@lverkuijl
Жыл бұрын
You are welcome to try. If you send me your mail adres I wil send it to you. But comments are in Dutch, as are several variables. Hope you can cope with that .. ;-)
@marcustrust9449
Жыл бұрын
@Lex Verkuijl Thank you so much and yes thats fine I should be able to work with that and yes but for some reason youtube wont allow me to comment my email as it keeps removing the comment after 30 seconds xD
@lverkuijl
Жыл бұрын
@@marcustrust9449 try writing it "my dot name at provider dot com" , see what happens ... 😀
@marcustrust9449
Жыл бұрын
@@lverkuijl ive tried everything and it aint workin are you on any other platforms i could send it to you on?