It’s nice that your loving wife lets you have your bench in the living room! Hats off to her for the understanding ways

@BubbaRountreeOutdoors

2 жыл бұрын

she's the best Barry... she's my best bud!!

@vdog4799

2 жыл бұрын

Amen!

I do love those Gualandi MG-42 and SSW wads!!! Thanks Wade!!!

Wade you are The Best shot shell Reloading guy on KZread! Thanks for sharing your knowledge Sir.

Thanks Wade, always appreciate longshot loads. I use it for 12g 20g and 9mm, 45. There are better powders for each application but in these times of limited options and availability I resort back to 1 powder to do it all. Also a much deserved thanks for getting me into shotshell reloading. I find it really relaxing and a way to spend an hour or so after the kiddos are asleep.

I 've been loading centerfire for decades. Loading shot shells sent me for a loop until I saw several of your videos. Loading and molding buckshot wasn't working for me with the crimp. Then I saw your video on 12 gauge buckshot that someone asked you to load 3 buck shot strung together from mold for total of 9 shot. You cut the wings off the wad and presto my problem has been solved! They don't teach that stuff in the manual. But made sense to me. Thanks so much!

Great work, thanks Bubba

Can’t wait for range day on the pattern board 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

Thanks again, great information

Somehow I instinctively trust a man with a reloading stations and drill press in the LR

the best part of this video was hearing ms. Joann speak. keep that jewel close to you Bubba. peace and love to you both.

@BubbaRountreeOutdoors

2 жыл бұрын

thanks brother John...

Wade I love that you put the note in that tells us what other buckshot sizes and how many will work. This makes is nice for me cause I use a lot of 4 buck. Thanks for all your hard work I love every video!!!

@BubbaRountreeOutdoors

2 жыл бұрын

yessir!!

You should do a red white and blue pellet with a clear hull that would be awsome

@maine-lysub5onic823

2 жыл бұрын

Haha…I got some of them. Slugs too….look great as a decorative conversation piece in the reload room

Snow, here in Fla...! Only once 1977. Please tell everyone that keeping records is part of the job and is most important. So I'm rewatching your videos over again. Lol. Now you know the rest of the story.

I sure enjoy your video's and have learned a lot, plus new ideas.

Thanks Wade another great video. That mg42 seems to be my go to wad now.

@BubbaRountreeOutdoors

2 жыл бұрын

I love em!

As always great job and information thank you sir 🙏👍

Another great video Wade. -4° here this morning but we need moisture sloughs are starting to dry up. Pray you and the Misses are doing well and staying warm.

@BubbaRountreeOutdoors

2 жыл бұрын

doing well! I know yall are in the freezer brother cause it's even cold here in the heart of the south!

*SWISS 1.5 Fg 'real black' still in production.*

Excellent, thorough video Wade👍🏼🔥. Finished your video and had to jump onto MA’s and got me a .31 cal mold ordered. We run the woodstove all winter in tandem with our baseboard. Keeps the oil costs down during winter here in Maine. The warmth a woodstove gives is unlike any other form of heat. Full body warmth to the bone and the aroma. Stay warm and keep off the roads 😜.

@BubbaRountreeOutdoors

2 жыл бұрын

we finally got a winter this time!! haven't really had 1 in years... hope yall are staying warm!!

@maine-lysub5onic823

2 жыл бұрын

@@BubbaRountreeOutdoors Yea, we are, sort of. A balmy 45° below freezing this morning at -13°. Looking at one heck of bomb snowstorm this weekend too climbing up the Atlantic from the south. Looks like a great weekend to cast.

fireside reloading makes for some good production. the component colors look great in those blue hulls, almost wouldnt want to shoot them

Little green wad , marvin the sender!

Thanks for the videos I’ve started reloading some

@jakeaddy1742

2 жыл бұрын

Finally found some clear hulls in stock today

I too belive in one lord one god one baptism and a five fold ministry. Keep the faith and Keep making Veido's I'm Watching and waiting for the next one with love and respect M.C.W.

@BubbaRountreeOutdoors

Жыл бұрын

thanks brother!!

Wow! You are really making up for lost time on these videos! We sure missed ya while you were dealing with the health issues. Great to have you back at the bench!

After watching you throw that 3 1/2 load together you had me looking for another 3 1/2 shotgun today

Gualandi nice

Hands down, "Best Buckshot Channel", says, Mike. haha

I'm not much on reloading but because it's yall I had to pop in and hit the like

So glad to hear you're up and runnin' again ! Have you been able to secure a 16 Ga shotgun to workup some buckshot loads in the future ???

I don't see any 0 buck shells anymore in the stores. I only know of one #1 buck load and it's a personal defense load. You are rally doing the sport a service by making these videos . I hope it is getting people to take up reloading .

@BubbaRountreeOutdoors

2 жыл бұрын

there are a ton of new loaders out there now Charles... I hear from em every day!

@bertkilborne6464

6 ай бұрын

Wade's been an asset to my buckshot reloading effort. Prior to joining the Buck & Slug group on Facebook, I was afraid to try any load that's not in the BPI book and my patterns weren't impressive. Now that's changed

Great series! So when you roll crimp and it goes inward past the first couple pellets, that's ok to do?

Im right outside of lake erie. We 2.5 feet of snow and be 0 with -8 winchill

Great video. You always have great info. We should nickname you bubba buckshot.

Do you know if you can use dive belt sea pearls they say it #4 shot. Can I load shotgun shells using them?

👍👍

Wade what’s your opinion on using CCI 209 primers and those same rounds

@Bubba Rountree Outdoors Do you have any tips for tuning the loads? I got horrible patterns from 35 yards for 2 3/4" S&B gold hull, Gualandi BRG 12 and 14, 10 pellets of Lee 00, 27-30 grains of Longshot and Federal 209, with buffer. 18.3 mm or "skeet" barrel.

👍

Wade, I have a TON of Winchester WST on hand because my son's senior 2020 trap season was cancelled. I've been loading some buck and slug by weight with it. If you have some of that powder could you do some testing to get a good load in 2 3/4 Winchester AA or Federal multipurpose? I just have a lot of this stuff on hand and I'd rather buck or slug it out than bird shot. Great video as always. Thanks!

@BubbaRountreeOutdoors

2 жыл бұрын

I haven't been able to get my hands on any of the Win powders yet! You can match payload weight with any posted data for game/trap loads using your buckshot!

Does it need to be high brass (16mm-25mm) or will rio feild hulls low brass work.(the dark blue ribed hulls.) Do all magnum loads like this require high brass ? Please answer all 3 questions. Look forward for your answers and I just tested the turkey bb 2 3/4 foicchi high brass primed shells from ballistic products with the 2 3/4 multi metal wads 33grs. longshot in my over and under 12 gauge love them and just finished making the first 25 rounds thanks a million.

@BubbaRountreeOutdoors

Жыл бұрын

no it doesn't have to be high brass! Low brass hulls work the same.

Would this work with a Cushioned TPS WAD? Or would pressures be increased too much?

Whoa! It’s a post frenzy! Keep up the good work Wade. I’m still working on an easily produced wad splitter/trimmer with the auto eject function. Had some stuff come up the past couple of years and haven’t been able to finish it like I wanted to. Should have some more time to get it done and send a few out to you. Cheers

@BubbaRountreeOutdoors

2 жыл бұрын

awesome!!

If you had to choose between the cheddite or the fiochhi hulls for loading buckshot which would you choose? Why?

@BubbaRountreeOutdoors

6 ай бұрын

It's the same data for either hull. I use both equally! really no preference for me.

I would love to have some of the 3.5 in super hot to shoot hogs with

Hello sir, I'm relatively new to shot shell reloading. I been loading brass for a few years. I'm wondering what is the advantage of using buffer on some loads and not using it in others. Thanks

@BubbaRountreeOutdoors

2 жыл бұрын

kzread.info/dash/bejne/p6plz8FwoqfZiLA.html

@TsYahoo143

2 жыл бұрын

Thank you for the link ,great information.

What powder do you prefer Longshot or Lil Gun in 1.5 oz buckshot loads in the 12 ga and 20 ga?

@BubbaRountreeOutdoors

4 ай бұрын

Longshot works best for me in both gauges...

Wade on the 3.5" would fold crimping be the same as Roll Crimping?

@BubbaRountreeOutdoors

2 жыл бұрын

Yes... it will work just fine!

Wade we need more videos using the little green wad??? What you think

@BubbaRountreeOutdoors

Жыл бұрын

yes we do Chris!! 😁

newb question. arent the wads used in this video straightwall? and arent the remington hulls tapered? is that an issue?

@BubbaRountreeOutdoors

9 ай бұрын

hey James. Yes the Rem hulls are slightly tapered but not an issue in this load!

@jamesyarbrough4777

9 ай бұрын

@@BubbaRountreeOutdoors thank ya sir

Hey Wade have you tried any .340 or .350 with longshot powder in a CB1138. 3.5" rounds?

@BubbaRountreeOutdoors

2 жыл бұрын

yes I have! we field tested several this past season and they worked great! I have some loaded to range test for yall but I need Hammer to shoot em for me. 😉

I'm curious, do the petals on the MG42 wad tear off like the SSW wad?

@BubbaRountreeOutdoors

11 ай бұрын

no... the super 12 (mg42) is attached by hinges to the base.

Great show but need more info on 2 3/4 loads

@BubbaRountreeOutdoors

2 жыл бұрын

working on it Tom! lot's of good stuff in the que!

What about hulls with steel heads? Are they any good for reloading?

@dubful1

2 жыл бұрын

Doesn’t make a difference if steel or brass.

@BubbaRountreeOutdoors

2 жыл бұрын

most new hulls now-a-days are steel that are plated with chrome or brass. but you can load any of them!

I take it the gaep bn2 roll crimps aswell as finishing fold crimps?

@BubbaRountreeOutdoors

2 ай бұрын

yessir!

@ClarkesonTheMarksman

2 ай бұрын

@@BubbaRountreeOutdoors Awesome, thankyou. Ordered one from clay and game :) Though they don't stock the arbour. I think the thread is m6 so I can just screw a bolt in of that size and chop of the excess with an angle grinder to fit in my pillar drill

@BubbaRountreeOutdoors

2 ай бұрын

@@ClarkesonTheMarksman i was going to do the same! when you nail down the the thread size let me know what it is!!

@ClarkesonTheMarksman

2 ай бұрын

@@BubbaRountreeOutdoors Shall do

Wade what’s the pattern difference between the mg42 and the super mini?? Thanks

@BubbaRountreeOutdoors

2 жыл бұрын

the mini patterns usually have a slightly wider perimeter pattern than the full grown MG42. Both are great wads for buckshot!

@BubbaRountreeOutdoors

2 жыл бұрын

the wads are basically the same. the MG42 has longer pedals and also has hinges holding the pedals to the power-piston (wad base) while the mini has short pedals that are designed to shed during the firing process.

Hi!! I would like to ask Can I replace the buck shots with, for example, # 4 copper-plated shots and use it for bird hunting, such components would be available here in Finland. It's nice to watch your videos👍👍

@BubbaRountreeOutdoors

2 жыл бұрын

Yes you can. As long as the payload weight is the same shot size doesn't matter!

@jumitoikkanen1152

2 жыл бұрын

@@BubbaRountreeOutdoors Thanks for the answer!!! Can you tell me how much 2 2/3 Hull shots weigh is? Best regards Janne

@BubbaRountreeOutdoors

2 жыл бұрын

@@jumitoikkanen1152 the weight can vary depending on the load. Usually 1 oz is the most common game load weight!

I need some load data for buckshot in a 10 Gauge

Afternoon Wade, hope your well?!. Just checked on c and g's and bp's website and it lists the payload weight for a gualndi h-12 / ssw to be 1 3/8 max but your jamming over 2 oz in there? Just being cautious as I've literally just managed to grab some longshot over here and I'd like to load a 1 7/8oz 15 x 00 buck load in a 3 inch cheddite and I happened to have those wads.

@BubbaRountreeOutdoors

9 күн бұрын

No data will be posted for a payload that over-stacks a wad. That short wad has a shallow pocket.

@ClarkesonTheMarksman

9 күн бұрын

@@BubbaRountreeOutdoorsI tore the petals off and filled up the shallow pocket in the bottom of the power piston section of the ssw with a 1/8th 20 gauge felt cushion so that its flush/flat and stacked x 15 00 buck by 3's conventionally

@BubbaRountreeOutdoors

8 күн бұрын

@@ClarkesonTheMarksman that will work! I use the base on the ssw wad a bunch!

Any for sale ?

im going to try roll crimping with a power drill i can't afford a press

@BubbaRountreeOutdoors

6 ай бұрын

Should work fine!

@robert4027

6 ай бұрын

@@BubbaRountreeOutdoors awesome thanks very much.

Great videos thanks put me on a 000 video that I can view

Hey Wade why is nail polish being applied? Thank you

@BubbaRountreeOutdoors

2 жыл бұрын

the nail hardener seals the round... keeps the buffer in and moisture out!

@raymondpoh

2 жыл бұрын

@@BubbaRountreeOutdoors Thank you

Wade, did you eat all of those cheese balls yourself just so you would have a great way to store your wads?

@BubbaRountreeOutdoors

Жыл бұрын

LOL!! You betcha!!

I’m commenting just simply to ask a question does anybody have a shotgun that absolutely hates 00buck but absolutely loves 000buck at 35 yards my pew pew will get 2-3 pellets on a target in a 18x18 inch same distance whole 9 a 8 pellet 000 load no matter the maker will put 4-5 in a 5 inch spread

@BubbaRountreeOutdoors

2 жыл бұрын

yessir! shotguns can be just that picky about what buckshot rounds they like. That's why it's so important to shoot/pattern then as much as possible!

@jdunk238

2 жыл бұрын

My 11-87 hates OO and loves OOO I may get 3 out of 15 in a 30" circle at 60yards. And the OOO it puts all 10 in a 5gal bucket lid at 60 yards.

@jamessummerlin6033

2 жыл бұрын

@@BubbaRountreeOutdoors I’m thrilled you responded I love the content I was just wondering I thought I was goin crazy

@jamessummerlin6033

2 жыл бұрын

@@jdunk238 crazy how picky they can be ain’t it

@BubbaRountreeOutdoors

2 жыл бұрын

@@jamessummerlin6033 My pleasure brother!! It can drive you crazy sometimes! J.P. jr has a M2000 Stoeger that had me pulling my hair out!

Someone asked me and I don't know. Take a shot cup, will it with 00 then fill it with epoxy resin. Then take it when curred and stuff it down in the hull and roll crimp it in. Can that be done and if so any danger one should be aware of?

@BubbaRountreeOutdoors

Жыл бұрын

I've never heard of that 1!