Using Freemcboot Memory Card with a Modchipped Ps2

Ойындар

Just a quick video clearing up a question I get asked all the time
If you want to get fmcb working with the hacked browser you can install an older version of FMCB like FMCB 1965 or 1953
Various Matrix options (Hold at console boot)
Triangle + Circle - Matrix Config Menu
Circle - PSX / DVD mode (Forces ps2 to play PS1 or DVDs)
Cross - Forces the system to bypass settings
Start - Disables the chip - Must reset the console after. To re-enable you must place the ps2 into standby mode (red light)
Select - Fast boot Ps2 Games
R1 - Boots a homebrew elf file from first memory card (mc0:/BOOT/BOOT.ELF
L1 - Boots a homebrew elf file from hard drive if installed (hdd0:/__boot/boot.elf)
-----
🤘Pre Modded Consoles / Check out My Send in Services / Written guides / Video Mirrors and All things ModzvilleUSA :D 🤘
modzvilleusa.com
🤘Not My Backup Channel Just In Case Ninty Nukes Me🤘
/ @notmodzvilleusa
All videos are Mirrored on LBRY here!
lbry.tv/@ModzvilleUSA:a
🤘Join The Discord!🤘
/ discord
🤘Instagram🤘
/ modzvilleusa
🤘Catch the Streams on Twitch!🤘
/ modzvilleusa
🤘Twitter🤘
/ modzvilleusa
🤘Odysee (Channel Mirror)🤘
odysee.com/@ModzvilleUSA:a
🤘Bitchute (Channel Mirror)🤘
www.bitchute.com/modzvilleusa/
🤘Facebook🤘
/ modzvilleusa
🤘Contact🤘
Email - modzvilleusa@gmail.com
Discord - ModzvilleUSA#7403
ModzvilleUSA
P.O. Box 20669
Long Beach, CA 90801
------------------
THE TOOLS I USE!
------------------
KSGER soldering iron
amzn.to/2sAockl
Soldering Iron Tips
amzn.to/36Hb0cp
Flux - Amtech NC-559-ASM-TF
amzn.to/38JuGTr
Solder - Kester Leaded
amzn.to/3jq1nHi
99% Alcohol
amzn.to/2PLrYQ0
Hakko Vacuum Pen
amzn.to/37y2xhc
Soft Bristle Tooth Brush
amzn.to/2sAnyDr
Tweasers, Exacto, Flush Cutters
amzn.to/2rR4q4i
30awg wire
amzn.to/3xe1heb
34awg Magnet Wire
amzn.to/3O3ivAL
28awg silcon wire
amzn.to/3KrYx0D
28awg ribbon wire
amzn.to/37BfLK4
Wire Strippers
amzn.to/2Pu0mA9
Helping Hands
amzn.to/2PsJqJW
Hakko Desoldering Gun
amzn.to/3q7D57b
Hot Air Rework Station
amzn.to/2Vdh34L
Hakko curved tweezers
amzn.to/3Jluma1
Microscope
amzn.to/3v5BhPs
Heat shrink tubing
amzn.to/3LTSqCi
Soldering Mat
amzn.to/35XLwgd
Precision Hot Glue Gun
amzn.to/3KuQP5A
Brush On Super Glue
amzn.to/3upOnru
Lithium Grease
amzn.to/360JQCE
Silcon Grease
amzn.to/3uqLmap
Retrobrite Goo
amzn.to/3Jm1MFf
Craft Knife Set
amzn.to/3Jqxqlg

Пікірлер: 44

  • @breaKdownINC
    @breaKdownINC Жыл бұрын

    Yo where is the intro? :(

  • @ModzvilleUSA

    @ModzvilleUSA

    Жыл бұрын

    Wanted to see if anyone would notice😂

  • @user-rf3fl2jm6e

    @user-rf3fl2jm6e

    Жыл бұрын

    I miss the into too

  • @Mr_I_Eat_Your_Doritos

    @Mr_I_Eat_Your_Doritos

    Жыл бұрын

    I need some guitar hero shredding

  • @mathieulh
    @mathieulh Жыл бұрын

    FMCB 1965 and 1953 work perfectly with a modbo 5.0 (even the osd browser) only the latest version does not work.

  • @ZiadHamwi99

    @ZiadHamwi99

    2 ай бұрын

    100%

  • @haloslayer255
    @haloslayer255 Жыл бұрын

    In the voice of Megabyte from Reboot: Total control, unlimited power!

  • @37Kilo2
    @37Kilo2 Жыл бұрын

    Perfect. This is exactly what i need. Installed a Modbo 5 and IDE Resurrector and homebrew just loads a black screen.

  • @user-rf3fl2jm6e
    @user-rf3fl2jm6e Жыл бұрын

    If you have one of the later 9k models with a modchip, you can launch fmcb from a cd rom. I used to do this all the time as a kid to play games from usb

  • @ModzvilleUSA

    @ModzvilleUSA

    Жыл бұрын

    You can do that now with freedvdboot

  • @tnaplastic2182
    @tnaplastic2182 Жыл бұрын

    DEV-Modes are depreciated, because they lack proper system initialization and hence cause issues in some games.

  • @jordsfjords885
    @jordsfjords885 Жыл бұрын

    I have a slim PS2 77004 PAL and I'm still wondering if it's worth mod chipping it. I really wanna solder a modchip but I'm confused with the mod chip choices. I see you have a MarsPro on your site, is it any good? Or would the Matrix Infinity be better? And do all mod chip behave like this together with FMCB?

  • @nhand42
    @nhand42 Жыл бұрын

    I lucked out with a 90002 that works with FreeMcboot. I prefer the 9000x series because of the built-in power supply. But the 7000x is objectively superior because it still has the IDE interface so you can add an SD-card mod.

  • @ModzvilleUSA

    @ModzvilleUSA

    Жыл бұрын

    Same but m2 mod for 70k is way cooler. Vid on Wednesday

  • @Xetzki

    @Xetzki

    8 ай бұрын

    Wait is this valid for the 77001 or am I out of luck

  • @TV-pk2il
    @TV-pk2il4 ай бұрын

    Quick question, do you think having a hard modded PS2 will increase the compatibility of games played through FMB?

  • @Modzie868
    @Modzie868 Жыл бұрын

    Whoever said that modchipped ps2s can't run homebrew, they need to sell their consoles and forget about gaming

  • @R2E4D6
    @R2E4D6 Жыл бұрын

    Do you by any chance have more matrix infinity 2.0 in your store for sale.

  • @VirtualSpeed
    @VirtualSpeed Жыл бұрын

    are these matrix v2.00 modchips good? I had back in the day the same ones with v1.99 and they were crap. They didn't save the settings, it would crash and never say "settings saved".

  • @Cellsplitter
    @Cellsplitter Жыл бұрын

    I'd like some more indepth explanation about the PS1 compatibility mentioned. I plan on playing some burned PS1 games on a chipped PS2 (fat) for the hardware backwards compatability and would like to know the best way to go about it. It's a V9 and I got a Picfix otw. Won't play discs untill it's installed, just to be safe.

  • @ModzvilleUSA

    @ModzvilleUSA

    Жыл бұрын

    If your console is NTSC-U, just flash mechapwn, Don't choose the force unlock version. You'll have Ps1 and Ps2 region free as well and Ps1 backup support. For NTSC-J v9s-v13s Mechapwn acts wonky, I've heard that people have mixed results with PAL as well.

  • @Cellsplitter

    @Cellsplitter

    Жыл бұрын

    @@ModzvilleUSA In my case it's a PAL PS2 where I plan to only play NTSC games (for 60hz).

  • @ModzvilleUSA

    @ModzvilleUSA

    Жыл бұрын

    @@Cellsplitter yeah can force pal or ntsc with a modchip. Sounds like you’re going to want to chip it to me.

  • @amritpalhh9836
    @amritpalhh9836 Жыл бұрын

    Will you get the matrix infinity 2.0 back in stock?

  • @inferno6529
    @inferno65296 ай бұрын

    Does this also work for FHDB?

  • @basicrom1414
    @basicrom1414 Жыл бұрын

    xmb 2.0 now make it look pritty lol

  • @tnaplastic2182
    @tnaplastic2182 Жыл бұрын

    2:58 Rather around 15% which automatically boot it. FMCB works on ALL PS2s, but automatically booting doesn't work on BOOT-ROM 2.30.

  • @ModzvilleUSA

    @ModzvilleUSA

    Жыл бұрын

    Maybe I've been lucky but when buying lots from japan, consoles that boot fmcb are pretty common.

  • @tnaplastic2182

    @tnaplastic2182

    Жыл бұрын

    @@ModzvilleUSA 90k which were compatible with FMCB were produced before September/October 2008.

  • @mrzero3082

    @mrzero3082

    Жыл бұрын

    ​​@@tnaplastic2182 can i replace my ps2 bios to bios that work with FMCB🤔 i have 90004 with 2.30 bios and i have sumo lite modchip

  • @tnaplastic2182

    @tnaplastic2182

    Жыл бұрын

    @@mrzero3082 It isn't a "BIOS", but a "BOOT-ROM"... It can be replaced with an older BOOT-ROM in theory, but not with your modchip...

  • @mrzero3082

    @mrzero3082

    Жыл бұрын

    @@tnaplastic2182 if i had replace my BOOT-ROM with older one does it will boot fmcb in my 90004 ps2? And does it damage the ps2 or corrupted it

  • @jm3493
    @jm3493 Жыл бұрын

    Wheres that paste bin?

  • @ModzvilleUSA

    @ModzvilleUSA

    Жыл бұрын

    Just added the button combos in the description

  • @jm3493

    @jm3493

    Жыл бұрын

    @@ModzvilleUSA Thank you!

  • @leftnutracin
    @leftnutracin Жыл бұрын

    Why do you prefer your consoles from Japan?

  • @BoosterTheRooster1

    @BoosterTheRooster1

    Жыл бұрын

    More color options

  • @illlogick7151

    @illlogick7151

    Жыл бұрын

    Better condition generally

  • @armandokolleman9693
    @armandokolleman9693 Жыл бұрын

    The Matrix is still out of stock 😥.

  • @ModzvilleUSA

    @ModzvilleUSA

    Жыл бұрын

    Yeah I filmed this a while ago. Chips are OOP and I can’t get any more unfortunately 😫

  • @armandokolleman9693

    @armandokolleman9693

    Жыл бұрын

    @@ModzvilleUSA I was afraid you were gonna say that. I literally searched for these chips all over the world.

Келесі