This was my motherboard. Many thanks to Adamant IT for fixing it after Asus refused the RMA. Background: The motherboard went into the "flashing zero zero" after a trivial BIOS change. It had been functioning perfectly up until that point. Each component in the system was tested independently to prove it was a motherboard issue. The USB flashback method did not work. The fixed motherboard is now back in a case and working as expected. Top Job. The world needs Adamant IT to fix more things.

@drvish

3 жыл бұрын

I was going to ask if USB flashback would work or not in that situation, Thanks for confirming Pip and thanks for making the video Graham. :)

@MrShwaggins

3 жыл бұрын

It's always a BIOS issue when you decide to update your PC. If the BIOS is working fine, leave that grenade alone!

@BeezyKing99

3 жыл бұрын

@@MrShwaggins Don't know how many times I keep saying that to my buddy... but more along the lines of "if your rig is working, don't pull the pin on the bios update, it'll blowback"

@MrShwaggins

3 жыл бұрын

@@BeezyKing99 If you want a power failure at the worst time, just make sure you don't have a UPS and are updating firmware or BIOS on anything. 90% chance of success

@williamjones4483

3 жыл бұрын

Asus screwed me over many years ago. I no longer buy anything at all from them.

Just noticed you hit 100K, congrats dude!

Thanks, that is a great intro into the programmer, the HDMI ISP flashing looks like a really game changer for bad monitor flash repairs (assuming its reasonably universally supported).

Excellent Video Adamant!: Very concisely explained and executed. I found this very helpful. We use motherboards on our analyzers and this gives me tools to recover a board that has been corrupted. More options at our disposal now. Thank you!

These videos of yours are great! I learn something new and useful every single time, and the way you deliver the information is perfect. Don't. Ever. Stop.

Yaaay man, freaking awesome! I knew this was a thing but I have never seen it before. So cool you do all these videos man. Totally underrated channel.

Thanks. That was fun to watch for someone who does not do this for a living. I enjoy the process you go through and the way you explain it. Thanks again.

You explain everything so easily, nice job, my progress in understanding laptop repair basically came from watching one of your videos, tell you the truth, I had a headache all day after watching that video cos I had been trying for over 6 months to understand what I was learning but couldn’t, then I stumbled on that video, your video was an eye opener and sent headache straight into my brain, took a long sleep after that, woke up and my eyes were open to see things I’ve been missing all along, need I say it was a good headache (wheeew) Thank you so very much 🙏🙏🙏🙏

VGA IN is for passthrough so that you can test monitors there are test tools under the tool menu, great video, when getting into laptop bios it get very interesting, where you would need to copy serial numbers , board numbers and windows keys 👍

Just perfect as always 👌🏻 thank you for your hard work!! You really deserve more from youtube!!! Your info is pure gold for electronics! 👏🏼🏅🏅🏅

As usual, very interesting and useful. Thanks for sharing!

Very nice video ! Great job and nice Demonstration of rt809f !!!

I have owned an RT809F for some time but didn't have a clue how to use it. Thanks to your superb video, I have been able to revive an ASUS B85M-G motherboard. The symptoms were a POST message indicating that CMOS settings needed to be recovered. After pressing the key indicated, a blank screen would appear and the system would be completely unresponsive. In this case, the chip was in a socketed DIP-8 package so removal and reinstallation were easy. In fact, no adapters were necessary - the chip plugged straight into the device! It seems that sporadic BIOS corruption can occur, since I know the owner of this computer wouldn't have tried to update his BIOS. He found it working one day and not the next.

Thanks for the demo!

Very helpful man...thank you so much for going in-depth about these. I do have a EVC2 from Elmorlabs and a clip...thankfully I never had to use it (although I tested it and works) :)

Very nice product Graham! Dutch regards, Nico.

Gorgeous video Thank you so much

Thanks for sharing this kind of content.

Thank you so very much, I have couple PC's that need reprogramming and had a lot of doubts about the process

Very useful information, as usual. Thank you !

Good demonstration. Thanks for sharing.

one of my favorite channel, you can realy learn something...

Perfect review!

Jumper cables for bread boards will fit on the pins. One side female and the other male. Buzz it out with a multi meter for pinout. This would be handy if you dont have a soldering iron.

@gorjy9610

3 жыл бұрын

better use female-female cable combined with standard 8 pin adapter that you get (or can just buy 20 of them for about $1) with all these zif's programmers. It will be easier for use.

Fabulous 👌 👏, The beauty of this video is lovely, descriptive and very informative , Thanks Brother..Your efforts to create such videos from you is👌 Fantastic , Keep it always up

Great video. Thank you for sharing. I have a couple of the CH341A programmers that came with the SOP8 clips and I haven't had any problems using them on most devices that support ISCP. The motherboards that do have a JTAG like connector probably has a pin that tells the IC, that is connected to the SPI Flash chip, to stay in a tri-state/high impedance mode. This allows for the ability for ISCP to work. I am also in the retro computer area and I know some hardware people that use some FPGA devices that use a SPI flash to hold the firmware as well and they have a jumper so you can use the clip on the 25Q80BV SOP8 chip to program it. In the cases where you can't find pinouts for the JTAG like port to program the flash chip then it is probably easier to just go ahead and desolder the chip then backup the chip and reprogram it with current BIOS image. I have one of the newer CH341A v1.7 programmers on its way, but I think I will go ahead and order one of these as well. The extra adapters that come with the RT809F look like they could be very useful.

Great video!! thanks for sharing

very handy vid mate. cheers

Please try the HDMI port on a TV next. It'd be really helpful to know if you can "trick" a TV into cooperating like this as well.

Very well done. Good job.

Thanks for the info. It helps alot.

Thanks for sharing!

I've also found a pencil eraser does a great job at cleaning contacts in a pinch.

That is a very standard pinout on that header by the looks of it. I am very surprised to even see it actually, they usually don't include the JTAG header in the final release of the board. The programmer that I used was a Dediprog, I do not recommend it unless you are willing to lay down serious money. You can indeed find the inexpensive model (Ee100) for $100 or less (I used the SF100 for BIOS programming), which isn't a bad price, but this is only for the programmer. The company does not give away the software even if you have the hardware. There are full levels of different types of software at their own price points. Definitely a case of getting what you pay for though. Their products are capable of programming pretty much everything that ever existed or will exist, but you have to purchase the hardware/software for it, they do not have a hobby grade or even "partially pro" kit the last time I checked. Times change though so who knows? If you want a "good" clip (as good as they ever get anyway) check into 3M, Pomona, or Mueller brands and do NOT get these off amazon or ebay, there are far to many fakes to know if you are getting what you want. Go straight to whatever passes for an industrial electronics supplier in your country. I personally use Digikey or Mouser in the US, I don't purchase from the cheap suppliers for electronic components when it matters to me.

i just purchased the vivo book 17 the keys on the key board are impossible to see unless under direct light gray with thin black lettering ..the strain on the eyes is getting very hard to deal with. very disappointed by ASUS not fixing this problem before retailing this computer. is there a fix?

you are so amazing man thank u

The asus x 299 XE gaming motherboard from looking at the PDF manual has a bios flashback to Reset the bios?

Absolutely brilliant video,graham thankyou so mych indeed,very helpfull indeed,

excellent vid, subscribed! what are you using as to magnify the board? can you do a vid on what tool you use?

Very interesting stuff :D

Hi Adamant, I have an old bios chip (Dip8, PDIP - 300mil - MX 25L8005PC-15G) from a 2008 asus motherboard, can I insert it directly on the programmer (without an additional adapter) ?

good info, good video, thank you

This video is so satisfying

I just unlocked my ransom firmware locked mac mini, this at first did not remedy the problem, it was no longer firmware locked but the ransom page was still showing after each boot - clearing the Reset NVRAM or PRAM solved that issue. Option, Command, P, and R. I used the ch341a isp/ICSP with the 3.3v fix and flashed it using flashrom. the device comes bare skin i would recommand conformal coating - i already shorted out one of them.

I have done an Alienware MS-7862 motherboard in-situ via the header port. Worked ok.

Hello there buddy ,, great video as usual ... only think is that when connecting to the chip trough VGA ISP ,, the monitor should be OFF :) but in the main outlet.

I'm a technician for you. and I have a sony vaio which posts normally the voltages are ok 19v & 5v3.2v on the monitor connector (I tested the monitor on the same machine and it is ok) and the monitor does not turn on. any idea what could be wrong. also I have the same machine which opens win normally and stays on the desktop and does not listen to any device (usb mouse, keyboard, network, etc.) could it be the bios? Thank you in advance for the nice videos

One question. Have you ever successfully read bios chip but not be able to write it? I wonder if the chip is faulty. Thanks.

wow wow wow Admant what a wonerful video you are a great it i s very helpful thank you very much really appriciate !

hi love all your work on KZread please keep it up , but can i be a nuisance ask where you downloaded the RT809F software to run it as i just get the run round

Would the HDMI cable work on a bricked gfx card? If not can you remove a bios chip on a gfx Card?

thanks buddy~! have you ever used CH341A? is this better than it you think?

I use the same device to program keys to VW, Audi, Mercedes, Porsche, because in those cars you have to do it via eeprom. I'm a professional locksmith by the way and also an electronics and computers enthusiast big time.

Good work getting the board to chooch again

that was really good well explained

Cool info, thanks :)

You videos are very inspiring! I would like to ask (or anybody experienced enough here) where can be the problem: I have a board MSI 970A-G43 (AM3+ equpped with Winbond 25Q64FVSIG bios chip). The board is running but is unable to retain the UEFI (BIOS) setting. When good CR2032 battery is installed the clock and date is ticking OK but after any kind of restart/reset/saving bios attempt I am prompted to "press F2" and set the bios again. Reflashing the bios in an ordinary way did not help. It seems to have the latest version flashed. Is there any chance to save the board? It the chip saving the setting as well? It is an old board but I wish to use it for a PC to donate my friends childern. Thank you! Best.

28:16 thats what we all like to see. Thank you for this video. I am finally go to repair bios.

Hi adam could you let me know where you got your programer from or which one. thanks 😊

Nice video, The last time I had a bricked MB, we could use a chip puller to get the bios chip out :)

can you add the original purchase link please...im not sure which is original or fake on of the RF809F

hi, i have fujitsu m740 all cooler start, no beeps, no post on gpu, after flash the bios ic (16pins) botloop, no post no beep !?!

Awesome video fair play :)

can you help me please what to buy svod 4 or vertyanov?

I really like to know where you find the RT809G for only $110 USD If anyone knows please do tell. Thanks

You can easily beep out the pin header against the pins of the chip. IDK if ordinary Dupont (Arduino style) cables will fit on the pins, I suspect the pins are too small. But when you have that pin header sitting there, it's almost a shame not to use it. Of course if your programmer is not able to drive the chip while it's in circuit, it wont help. But if the programmer is any good, I suppose it should work?

hi can you give me the link for the 1.8v adapter

hellow sir. My pc is not booting into bios. It’s an x99 motherboard. I tried everything from cleaning the the cpu, ram, connecting the 8 pin cpu power plug and 24 pin but it kept on recycling power. A few days ago if managed to turn it on with only 1 ram stick. Motherboards qcode led is not showing any lights on, monitor turns on with a single bar on the top left side and dbug shows 00 code just like before. After watching my KZread videos, i am thinking It's a bios problem. But i'm an average home pc person. I have 2 bios chip on my motherboard and yes i did tried both of them and it didn’t work. Fortunately those bios chips are socketed like that fatality motherboard you fixed. Pls tell me what to do. Thanks

Sr i have this problem RT809H Write error, operation terminated. I NEED HELP

6:23 gotta love me some basic input/output system system

The video port contains I²C bus for DDC. You can actually use the I²C bus for anything else I²C other than DDC. I have experimented about getting I²C from my laptop and be able to use raspberry pi/arduino I²C stuff directly with my laptop, like GPIO Extender and else.. maybe it explains why we can read/flash rom chip inside the monitor via the video cable? If you run Linux and type "sudo ii2cdetect -L" it might shows your monitor's i2c address and bus

How I get some Laptop bin file please. What is free website. Thank you

Hi. I am trying to flash the BIOS chip for my Dell Inspiron 3521 and I discovered on the motherboard two BIOS chips. One Winbond 25Q16C and the other one is an Winbond 25Q32F. I tried to google search a bit about these chips. It seems like none of these chips will flash with the BIOS (.bin file) that I got from Dell's official website. It looks like the BIOS bin file it's larger to be flashed on any of these chips. Could you please give me an advice?

@Adamant_IT

2 жыл бұрын

One of them is the main BIOS chip, the other one is the EC Firmware (sometimes known as ME, lots of arguments about this). Ideally you need to do both. I don't know a lot about how to prepare a BIOS file from the Dell website for this though. There's a couple of chaps in the Adamant IT discord server who can probably answer this.

I have had issues flashing Asus "CAP" files directly and have had to remove the actual BIN files from the CAP package 1st using my cheap flash writer. Do you think this flasher or software is ignoring the 2kb header of the CAP and writing just binary BIOS ?

@Adamant_IT

3 жыл бұрын

The log said that it 'converted' it, so I'm guessing that's the case, yea. Now that you mention it I don't think I've manually re-programmed an Asus board before, so this would've been the first time I've actually flashed a CAP file. I've seen some tips from people about converting these though, so looks like there's a few ways around it like you suggest!

Dumb question, if a motherboard had a HDMI/VGA connector, would connecting this device using the HDMI/VGA cable also work in the same way as the monitor hook up? potentially saving you doing any soldering at all?

@chrisvm6231

3 жыл бұрын

No, the bios was not accessible so it would not have made any difference

I also had pretty much no luck with the clips, but then one time I realised you actually must turn on the system in order for the clip to work! This is because the power supply in the programmer can't power the chip plus whatever is connected to it on the motherboard! (In my case I get overcurrent error) For power cycling boards like this though, you need a paper clip to jump-start the psu so the psu never shuts off

How to buy this programmer do you have any link or website

Afternoon!

Brilliant!

In your opinion is RT809F better or the TL866II plus?

BTW, i dont know if any1 ever told you or commented here but pin 1 is actually marked with that white trace next to the solder pad, also, most of the times u have a dot on the bord or a larget white trace on the side pad

Thanks!

I've always wondered why board makers moved away from socket-able bios chips. I've personally never bricked a mobo and I regularly flash bios updates when many people suggest not doing it. I want to believe they do it to increase money from service like you've done here but with flashback, is this really that common of a problem in 2021? I'd like to get some of the tools you used but my luck would be spending ~$50-100 bucks on all the supplies to do this kind of work and I might do it once and then the tools would all sit in a drawer until they are obsolete. :\ Nice video!

Hey Adam, I love the video, their some of the great information for young guys like me getting into tech. But I've got a question, i successful did this on a gigabyte b350 motherboard, but now, when gaming the computer with stutter and sometimes crash the game, or just freeze for a moment. I tried switching out everything before the motherboard because I didn't think this would be a motherboard issue, but my brother said the issue finally left after changing his motherboard and case. Any tips will be appreciated from viewers aswell

@Adamant_IT

3 жыл бұрын

Tough to say, might be that the BIOS version you flashed had stability issues, or had defaulted to some settings that were a bit ropy (XMP issues, that sort of thing). I don't think flashing the board can cause stability problems, it'll either work or it won't, but maybe there was more than one thing wrong with it.

@andrewdicker8877

3 жыл бұрын

@@Adamant_IT That would make sense and I would agree, I don't think flashing a bios would cause stability issues, so it would make sense that there is something wrong with the bios. Thanks for the response, I really appreciate it and it made me very happy to see you replied yourself :D

i have a question u showed u could interface with your monitor and the chip thats inside there. could u also have pluged in vga or hdmi into the motherboard to interface with the chip without having to take it out? just curious in if that would work

@Adamant_IT

3 жыл бұрын

No, that wouldn't work. I believe monitors specifically have this feature for production programming/diagnostics.

@stefanl5183

3 жыл бұрын

@@Adamant_IT Hello. great video. Do you think the VGA and HDMI connections are actually for programming the firmware of the monitor or could it only be the EDID data in order to enable different modes, for example custom resolutions and refresh rates?

Sir I have a question. I'm doing computer work too. I have the tl866 programmer. Can I write .CAP files with this device? I thought it was just writing .BIN files.

@Adamant_IT

3 жыл бұрын

My understanding is that CAP files have some extra data in the header, which can be removed by editing the file. I don't know the specifics on it, but I've seen some references that it's pretty straight forward. The RT809f software did it automatically for me.

Thanks!!

Amazing, ive got one ordered with a bunch of adapters, hope I can unbrick my asrock ab350m pro4 :D

@LeadFarmer813

3 жыл бұрын

make sure u got a backlup of original! i can fix it if u need help in discord im LeadFarmer

@adammesic

3 жыл бұрын

No offence, but is it worth? I mean, those boards (used) are pretty much around the same price as the BIOS flasher itself.

what is the temperature and air of hot air working staion to remove that ic, Thank u for ur video

@Adamant_IT

2 жыл бұрын

I run 450c / full air to remove chips from mobos. SOP8 and WSON8 chips aren't difficult to move though, so even a cheap station should make light work of them. Turn airflow down to about half when putting back on the board, or as needed 👌

wonder if this method will bring a prebuilt hard coded bios board that cannoy be updated normally by gigabyte or asus but only from the prebuilt manufacturer but mybe this method would rewrite a bios version onto the prebuilt board turning it back into a normal retail board i got a gigabyte b450m ds3h wifi v2 cf-Y1 that the bios cant be updated thru gigabyte but from rosewill/ABS prebuilt pc manufacturer so as of now im stuck on F1 bios for AMD my bios chip is MX25U12873F looks like 1.8V

@jaro6985

3 жыл бұрын

You'd want to be really sure the hardware is the same.

@garyww24

3 жыл бұрын

@@jaro6985 yea gigabyte has my same board except non Y1 a guy on reddit used AFUWIN utility to flash his hard coded bios with a known bios of a board same as his but a retail version i cant seem to get that software to work correctly on my pc keep getting a error

I had the exact problem and I have flashed the bios using a ch341a with 1.8v adapter but it still doesn't boot... Asus B350 itx mobo.

@Matt-pj9dg

22 күн бұрын

Still having the same problem. removed the chip and flashed it again placed it back. still powercycling if i read it and compare the data it is identical. might be hardbricked...

Hi Graham if you búy adapter you can also flash SIO chips or KBC CHIP like the ENE chip. Just to inform you. I like your channel. Keep up the good work Regards Steve from Belgium

@Adamant_IT

3 жыл бұрын

Interesting, I'll look into that!

👍Brilliant!

If you couldn't identify what voltage the chip runs at beforehand would it be safe to try the lower voltage first to see if it turns on or not?

@Adamant_IT

3 жыл бұрын

Yea that sounds reasonable. Data sheets are usually easy enough to find though, so always the best option.

The programmer has a red led indicating the is a read error apart from the app and if the led blinks green is reading ok in the status adapter ;)

Excellent

My X79 Ranger VII did the old 00 Boot loop, I did everything, I wish I just ordered a new Bios Chip and reprogrammed it. bought a replacement mobo in the end jus to save the headache.

I would advise you buy a buspirate v3 or a busblaster as a tool for reprogramming, both handle spi chips as well as lpc bios and jtag for router recovery. both have well documented tools for this as well as special tools for doing recovery work from some chips(emmc, sd cards) . They also double up as serial interface. the buspirate will also act as many other devices (uart,spi,i2c,jtag,sdcard & more), open source software is well supported and windows/linux gui/non-gui versions of many programs exist. bonus is both devices also compatible with sigrok logic analyzer.

The Pin 1 WAS indeed marked on the motherboard... there was a 1cm or so thicker line on the pin 1 position...

that was awesome .. 👌👏😎