Yes, that Bill A couple of things: - This was not my car, I know a guy who knows a guy who fixes these cars. The engine was replaced in the car and I asked him if I could send it to Eric and he donated it. But he does not want to be named. - The engine sat outside for about 2 years in a pile of other junk. Thus the grass and unfortunately the water. - I wanted the valve covers back since I'm going to make a desktop paperweight for the guy who gave it to me and someone else by taking them to a machine shop and having the script "Maserati" cut out and polished. This is one of my favorite channels so when I was talking to the guy who had it I thought it would make a great video of a motor that Eric would not likely see in his yard. It did not disappoint.

@I_Do_Cars

11 ай бұрын

Thanks again Bill! Valve covers are all yours!

@ironclay3939

11 ай бұрын

So Wait!!? so you know the murderer!? - *this is going to be so much easier than buying the number off the engine block or buying the entire engine block and shipping it to New Zealand just to get the last owner* - send the pieces to me in New Zealand along with the address of the guy who murdered the Maserati and I'll make him a paper weight he won't forget. I think psychopaths of the motoring world should unite and ... have a little chat with the last owner - stuff like "Ever Lift The Bonnet except to Nail a Hot Bird under it?" If Only I was a psychopath - "Would he like to know what it feels like having your Arse hammered on an overheating Maserati Ghibli F160 Twin Turbo V6 Engine?" 😇

@donQpublic

9 ай бұрын

Thanks Bill!

@truracer20

3 ай бұрын

@@ironclay3939 Why not lay the blame where it is truly deserved? Give it to whoever decided to team up with Chrysler...

@markntexas8265

2 ай бұрын

@@truracer20Obama and the Fiat guy. Remember Obama gave Fiat Chrysler Motors in one of the most idiotic Bankruptcy deals ever.

Favorite job I ever had was working as a dismantler for a junkyard... the junkyard hired kids going to school for auto mechanics, 18 to 23 years old, a pair of wire cutters, a side Cutters, and oxy acetylene torch, and permission to just drop stuff straight down. It worked perfectly. And I know my comment is pretty pointless, but I wanted to comment to help the algorithm. This is an awesome Channel!

@themightymutt5213

11 ай бұрын

That sounds like a lot more fun than the job I got from taking auto shop in high school. I was hired on for minimum wage at a Dodge dealership. All i did was run stuff from the parts dept to whichever repair/body bay needed them. Insanely boring job.

@DaveFromColorado

11 ай бұрын

@@themightymutt5213 they hired us from the local Tech College nearby, they made sure we knew three things, we were only getting minimum wage, nothing we did counted towards the school credit hours, and there were no benefits to the job... although one benefit was we were allowed to grab parts for projects we were working on at home, they told us we would get a steep discount on those parts but most often they were free.

@sfbfriend

11 ай бұрын

I worked at KFC..nuff said.

@DaveFromColorado

11 ай бұрын

@@sfbfriend my first job when I was 15 years old, was Taco Bell.

@robtheslob3940

11 ай бұрын

@@sfbfriend 10 little perches, KFC powder and frying pan ...

Placing the water pump into a box and filling it with packing peanuts was hilarious 🤣🤣

@yeahitskimmel

11 ай бұрын

The rock auto tape on the box really got me, now that's what I call Various Mfr

@09corvettezr1

11 ай бұрын

Even funnier that it is a rock auto box.

@jaredkennedy6576

11 ай бұрын

Dude's definitely leaning into the humor.

@liver.flush.maestro

11 ай бұрын

Yeah, I wonder where he shipped to 🤣

@VoVilliaCorp

11 ай бұрын

@@liver.flush.maestro To italy, let maserati reuse it lol

My day is now a little better. I love this channel no BS, no sales pitch. Just a good man and a wrench!

@anthonybertone2336

11 ай бұрын

Amen

@Rodknockacres

11 ай бұрын

And goofy comments

@geoffreyanderson2285

11 ай бұрын

Agreed. Eric needs a merch shop and to sell shirts that say: "I'm a dude that zips bolts out until things fall apart"

@the_cazador7011

11 ай бұрын

yeah i do i watch him a lot on my other youtube acc i have and i see him like a entertainer always likes to laugh and is funny, which makes his videos even more better.

I wait all week for my Saturday evening autopsy. This one was not a disappointment.

Maserati tech here 👋🏾 These blocks are cast in Indiana and then sent to Modena Italy for assembly in the Ferrari plant. Maserati now makes their own engines off of the Nettuno platform which is more similar to the Alfa Romeo quadtifoglio a twin turbo 60 degree v6 I retired from the dealership to own a shop but still see many Maseratis. I’ve got one in my shop now that has had a similar fate but I will be tearing it down to repair it. Wish my clients wallet luck!

Quite telling to see the Pentastar emblem on the cam phasers.

@johnt.848

11 ай бұрын

And you can see the timing marks on the Cams were way off due to the chain jumping teeth

I lobe the exotic engines making their way in for teardown. I lobe it a lot.

@tetedur377

11 ай бұрын

I dunno, man, I just cam hang, you know? Not everyone cam.

@jamesmedina2062

11 ай бұрын

I cam lobe it too❤❤❤

@evanchapmanfanman

11 ай бұрын

Well it’s all in the timing (chain).

Good evening Eric and thank you Bill.

@elGamiReal

11 ай бұрын

Thank you Bill

Damn this thing really does look like a unnecessarily more complicated 3.6 Pentastar

@fry.master

11 ай бұрын

Similar power, too

@Bobsnarls

11 ай бұрын

What’s “complicated” about it?

@petercroft9895

11 ай бұрын

That timing case end of the motor with a mess of chains, guides and tensioners instead of a single belt or chain. It looked like it had variable valve timing too. A vane pump instead of a gear pump. Camshafts with roller rockers instead of directly onto shims and buckets. There are probably over 100 components that could quite easily be engineered out if you weren't raiding the corporate parts bin.

@donkeymarco

10 ай бұрын

It is a twin turbo engine with 2 variable cam system per head (one for intake valves and one for exhaust ones). The oil pump is a variable displacement oil pump. The dystem are similar to the ones in the V8.

@Bobsnarls

10 ай бұрын

@@petercroft9895 Sounds like you’re used to outdated Pushrod American garbage 😆. The configuration for this Engine is not much different than the Ferrari F154 and BMW or Audi V6s.

What makes the machine work even more remarkable is that, according to Wikipedia, the blocks are cast at the Chrysler plant in Kokomo, then machined at the Trenton plant, and then sent across the Atlantic for final assembly in Modena by Ferrari.

@walkerhall9243

11 ай бұрын

Chrysler + Italians = most reliable vehicle

@johnrebus1641

11 ай бұрын

@@walkerhall9243 LOL

@brynsmith3384

11 ай бұрын

Correct my first honest laugh from a KZread comment in a few days

@TomPauls007

11 ай бұрын

how do you spell "RUN"?

@andrewallason4530

11 ай бұрын

Kinda reminds me of when alfalfa romeo ( yes, I intended to spell it that way) and nissan jointly designed and manufactured cars. Unfortunately, the Japanese designed it, and the Italians built it. So sad.

Eric, my bet is soon as the timing unraveled, the computer noped itself out of running any longer, and that's what saved the total bearing meltdown.

@jerehada

11 ай бұрын

+1 my guess to. Looks like maintenance was non existent ent. So if greater than 100k I’d not call out the timing chain guides just bad owner.

You forgot to add the RockAuto fridge magnet in the box!

Your distain for plastic timing guides and subsequent violence against them never gets old

The water pump bit never gets old 😂.

@ramonalvarez8559

11 ай бұрын

Similar to the 1997 Toyota Tacoma water pump joke. This engineer may have designed the water pump on a Friday Afternoon.

@jaymorrison2419

11 ай бұрын

I loved the script flip this time.

Ahh the reliability of Chrysler with the price of Ferrari. Perfecto

@bwalker4194

11 ай бұрын

I got to be “that guy” who had to inform a friend that her Renegade was actually a Fiat with a Jeep insignia on the front. It was quite a Stellantis moment.

@larryjohns8823

11 ай бұрын

​@@bwalker4194About 99% of those owners refuse to believe their "Jeep" is a Fiat😮

@illusional.503

11 ай бұрын

actually the ghibli is 30-40k used even with low miles

@ramonalvarez8559

11 ай бұрын

​@@larryjohns8823I agree 100%. Yes Jeep owners refused to believe Jeep is a FIAT. Really it's assembled in America with Italian parts and they do have shoddy quality parts. Renegades are actually assembled in Melfi, Italy. Just look at either the edge of the left front door or the door sill. Same with the new Jeep Compass.

@Robert44444444

11 ай бұрын

So I love the Ghibli. Discovered it in early '16 and began researching the Maserati line. I joined 2 different online users groups so I cold learn what owners did & didn't like about these cars. I came away with 2 decisions: I was going to buy one… and I would seek out a relatively low mileage Ghibli S or SQ4 with remaining warranty. I had a very specific idea of color, wheel choice and trim that needed to be met as well as a target price range… and I would keep an eye out (online) and wait until I could find what I wanted, or I'd go without. It wasn't until late July '20 that I found a 2017 Ghibli S Zenga Edition in my color and wheel choice as a CPO unit from Maserati Dealer with extended warranty (clean Carfax)… 24,950 miles for $39.2K w/ 1.9% financing (sticker in fall of 2016 for this car: $100,700). My other vehicle is a 2006 Chevy Trailblazer SS (6.0 V8) that's 17.5yrs old now w/ 106K miles… I have no illusions of keeping this Ghibli S anywhere near that long, or for that many miles. I figure another 2-3 years, keep up with the scheduled service, sell it and I'll have had about as low-cost a version of a not very old Maserati ownership experience one could have. It has been a joy to drive. From a tech features standpoint, I'd advise anyone to pass on a 2014-16… significant improvements in that area were introduced in the 2017MY.

Thanks Bill and you da man! Look forward to Saturday night tear downs with Eric and thanks again Bill!

"My Maserati did 185. Now it is a paperweight, lost a timing guide.:" Thanks Joe Walsh :P

@chrisbayus5189

11 ай бұрын

Yes! I needed this comment

@2008solsticegxp

11 ай бұрын

"Sounds like a country song"

@SR-fm1ft

11 ай бұрын

I have a tow ride in the back I take it to a shade tree shop and got carjacked

@darthdevious

11 ай бұрын

@@SR-fm1ft lmao, nice second verse

@kbnoise9625

11 ай бұрын

Do you still drive? 😂

The Pentastar was designed with a lot of headroom--according to AllPar, it was designed from the outset to accept displacements from 3.0 to 3.6, variable valve timing and variable lift (implemented in Gen 3), direct injection and twin turbos. Many of the higher end features seem to have been implemented on the Maserati versions. They've had their foibles such as the Gen1 issues with valve seats on the one bank and of course the infamous oil cooler leaks. Like most modern engines they do not suffer fools who think they can go two years between oil changes. There are some better and a lot worse.

I was looking at oil changes intervals and believe it or not but aftermarket service centers as reported online say to change your oil every 12,500 miles. Absolutely insane.

@AlessandroGenTLe

11 ай бұрын

And, you know, latest VW Golf (maybe Rabbit in the US?)? They now claims that you can go 50kkm without oil change. That's 31k miles! They say "due to the better oil performance" and all that BS... AND THERE ARE PEOPLE BELIVING THAT CR4P!!!!

TY Bill. The machining on the Crank was beautiful. That engine took some time to build in just the perfection of the parts.

I really like that I trust you enough to trust you when you say you read all the comments :) it makes the honesty feel more fulfilling. Over two years I've been watching you've taught me most of what I know about engines, your steadfast regularity has been a small but unique part of getting myself through tough times, and rewatching your videos has done more to combat my insomnia than any substance or other routine I've tried. Thank you, I know I'm not the only person whose life you've touched positively with your videos, please keep up this love you are putting out into the world

I know a lot of European luxury car companies have ventured into some pretty bizarre branding opportunities, but never in my wildest dreams did I imagine a Maserati duck caller.

@donaldvincent

11 ай бұрын

I have a Ferrari brand bottle corker (puts corks into new bottles of wine) it is red with white interior. Made in Italy of course. Bought it in the mid 1990's. It has gotten a lot of laughs over the years

I love the small side comments and issues - "sneakers," shape of the water pump passage, shipping box, and of course the oil pump fun. And as always, an informative and interesting tear-down. Wouldn't there have been an oil pressure warning?

@I_Do_Cars

11 ай бұрын

Probably, I think this one was shut down quick

Ivan @ PHAD recently worked on a Mazarati. Needed a complete timing job after 60K miles, chain stretched to the point it jumped timing. Only difference with that engine, caught it before there was any damage to the engine. So not only is the car expensive, it has expensive maintenance!

@PineHollowAutoDiagnostics

11 ай бұрын

That was the most tedious timing job of my life LOL

These engines are basically a worked over Pentastar. Oil pump looks the same, basic block is very similar, head design is similar. The cam phasers even have the Chrysler logo.

@joskd8491

11 ай бұрын

the Maserati fanboys can explain all that by telling the Chrysler engine is in fact a Maserati engine :)

I love the care you take with the most valuable and reusable part, the water pump! The proper packaging was much more secure than just wrapping with clean towels like the last few engines!! ;-) Keep up the great work, brother! I look forward to anything you put out more than any other channel I follow, seriously. Your videos can never be to long for me so please never worry about that! I'd watch you wash a car for a hour if that's what you posted!!

Thanks very much, Bill!! Another great tear down, Eric. Thank you!

Thanks Eric. Years ago I rebuilt a Fiat 4-cylinder engine, making one good one out of the two slightly ''broken'' ones I had ...and the quality of the engine was so much better than the GM manufactured 4-cylinder I had previously totally rebuilt. I revised my opinion of Italian made engines after that, though I'd still never buy an Italian (or French) car because of reliability problems with the cars in general. I had owned two Alfa Romeos before that; same deal. good engines but problems with electrics and other parts of the car...never again!

I stumbled across your channel and i must say it is very relaxing and fascinating watching you tear them down, explain and throw away "good" items 😂 thank you

Thanks Bill and Eric, another great tear down. Remarkable how similar the architecture between this and the 3.6 Pentastar

I stumbled onto this channel a week ago and have enjoyed each video I have seen. It's refreshing to hear someone speak clearly and coherently and not try and come off as something or someone that they are not. Great job!

Tes vidéos sont toujours excellents. J'ai déjà hâte de voir le prochain.

When your shipping guy said "engine turned over...accidentally"...I don't think he meant the crankshaft 🤣🤣🤣

@I_Do_Cars

11 ай бұрын

Oh, hadn’t considered that 😂

Thanks Bill in PA!!!!! And thanks to Eric! If it weren't for you I'd have be taking things apart, randomly, to see how they work. Your channel satisfies about 80% of my mechanical curiosity.

Always enjoy your engine teardowns. Great job as always.

Your job will definitely keep you in Shape !👍✌️

OMG, the water pump shenanigans each week are hilarious. Look forward to seeing what you’re gonna do.

Love looking forward to the weekend teardown! I learn something every time, so fun

I love your commentary. It makes these so fun to watch. Thank you

Eric's wrenching is impeccable. What a stud!

@Ben-jq5oo

11 ай бұрын

He is!

It's been a while since Security Tote made an appearance on the channel. Interesting to see a very uncommon engine on your channel. Thanks for your content.

Thanks Bill! I watched a Pentastar tear down right before this one, so it's funny you showed the comparisons.

I am not sure why it is so calming to watch you tear down engines, but thanks!

“this cam looks….Nope, it’s damaged too” I think that I hear you say “it’s damaged too” in nearly every tear down. 😀

Thank you for the Maserati autopsy. Without your time and effort, I'd never had the pleasure of seeing it. The timing chain guides looks like Chrysler was involved.

Great video, Thanks to Bill and Eric!!

Thank you Bill. I really enjoyed your comparison of the two heads.

I didn't think we'd see this engine on this channel lol! This thing was obviously tuned, oil was not changed, incorrect oil, redlined with low oil or all of the above. If you maintain a Maserati correctly it treats you right, various have gone over 200K miles. If not, the most common issues that come with neglect are definitely timing and rod bearings. The other issue is the oil sensor / sending units on the '13-15 models. Those sometimes go bad and the only warning is the dash indicator showing erratic or full pressure, often overseen by a typical Maserati owner. As a result the oil pump operates incorrectly and destroys components, that could have also happened here. Great teardown video as always! Now do an F154, LOL! Jk jk jk

Thanks Bill !! I've driven a few of those at auction , not really impressed , but , that's me . Some may enjoy those vehicles

Informative, entertaining and interesting. Great job once again. I appreciate all your efforts and knowledge to share. Thank you!

Thank you Bill... Great one... Again Eric I'm still hooked... Every Saturday night...

Loved this one. The machining was immediately superior looking. Love your tear downs. They definitely sell a boat load of beer.

Thanks Bill!

Another great teardown, thanks for sharing 👍.

Thank you Bill from PA!

Awesome take down as usual. How about including some B roll of the parts before and after the parts washer? I always find it very interesting to see the stark contrast. Thank for the videos.

This man's comedy is top tier. Also I would like an apology from that engine for that nasty soup it slopped out when you drained it, I was mid bite of my cheesy bread

My thanks to Mr Bill for allowing us the peek at this one! I think someone musta rinched it off with a hose pipe, and that's how the warter got in! I'm a bird watcher, as well as a teardown watcher, and today I was doing both at once. When you started running the oil pump with air, I was attacked by a diamond-billed rockpecker! First known such attack on the East coast - those birds are normally way over in Trail Mater country! All seriousness aside, i',ve seen quite a few engines with guides precisely where they would prevent that chain contact with valve cover.

Excellent video...as always. I'm a home shop guy who never gets a chance to do this stuff that you do Eric. i like seeing the many possibilities of why things go wrong with the evidence that you show. Hard to find that! Also, love the humor that you bring, especially the unspoken circumstances. Keep it up and thanks! New Subscriber.

I own both cars with timing chains and timing belts. The ones with chains are the only ones I worry about failing, because I change the timing belt on a regular basis and it's relatively easy to do. Things that are designed to be maintained are much better for longevity.

@theairstig9164

11 ай бұрын

Except wrenching on a bolt or nut will eventually wear out the thread. You can only maintain it so many times

@Fix_It_Again_Tony

11 ай бұрын

Chains easily go 200,000+ miles with only regular oil changes. This engine didn't have enough oil changes. It almost certainly had a computer that told the owner when to change the oil, but it was set up for intervals that were far too long, especially for a turbo engine. Unfortunately, one of the ways car companies keep total cost of ownership low (in the sales brochure) is by extending oil change intervals in the computer. They don't care because they can tell you it's cheaper to own their cars, even if they only last 100,000 miles because the oil wasn't changed often enough. BMW was selling turbo cars with 15,000 mile intervals, but they would pick up the maintenance for the first four years. Honda will happily let you drive 10 or 11 thousand miles per oil change and when your engine starts to consume oil as long as it is less that 1 qt. per 1,000 miles then there is no problem. I would rather by one car every 200,000 miles than two cars in that same distance. blog.modbargains.com/15000-mile-oil-change-myth/

@michaelsnively3621

8 ай бұрын

I think if you go to the dealer, an oil change is over $1000.

Launching the tensioner was epic 🤣🤣🤣 Rich daddy probably bought that car for his kid and sent them off to college with it. Shame it wasn't maintained properly.

THANK YOU Bill!

Thank you Bill from Pennsylvania!

Thank you Bill from Pennsylvania for the core. Glad to see something I don't ever think I'd see if it wasn't for you! Another great video from our fellow car enjoyer as always.

Great video! It never ceases to amaze me the complexity of overhead cam engines and the many issues bad oiling can cause, and contrast that to the simplicity of the gen 1 LS engine. Though they have there issues too. 😊

@Swerzuh

11 ай бұрын

I'm still taking overhead cam engines over overhead valve engines all day long. They're a lot more efficient. Part of the issue here is that the person who owned this car looks like they went quite a bit over their oil change intervals and probably didn't check their oil.

@JSu2.

11 ай бұрын

There is nothing inherent to "efficiency" in ohc engines. You're probably just noting hp/L, which has very little to do with actual efficiency. It's the 4-valve per cylinder and increased rpm range that gives the opportunity for power boost on the top end. Take those things away, and the "efficiency" suddenly disappears. Where 2 engines have common rpm, the smaller displacement ohc typically has inferior output. The hp/L at those rpm will not be all that different from ohv, and the lesser displacement simply yields underwhelming output. That's not "efficiency" at all. It's just making up the power at a higher rpm (where higher rpm presents the opportunity for more breathing).

@gentjim5007

11 ай бұрын

I'll keep my simple and "inefficient" pushrod motor in both my truck "5.3" and my car "6.2" which btw makes 425 h.p. and gets 23 mph at 75 mph on the highway. 😁

@Swerzuh

10 ай бұрын

@JSu2. OHC have a lot more volumetric efficiency, yes. And there's a reason that very few modern performance cars use OHV.

@JSu2.

10 ай бұрын

"volumetric efficiency" is a bullshit term, the way you are using it. It's purely the effect that more breathing can occur at higher rpm, and it would apply to any engine design, not just ohc exclusively. You could just as well say that a forced induction ohv engine will have higher volumetric efficiency than a NA ohc engine. Yes...because pressurized air yields more breathing, just like extended rpm yields more breathing. It's not some magical quality that appears just because a cam is positioned over the valve it actuates in a cylinder head design.

I love it when you struggle to get some parts off the engine. I am the same way. I will work on it into perpetuity until I win and the part comes off. Gives you a great sense of accomplishment.

Taking breaks from channels are the best, getta come back to a awesome teardown.

my guess is lack of oil, from lack of oil changes. caused wear on the things (bit of everything ate up or gunked up) until there were no more of those things to get eaten up, then it came apart and ended up too expensive to fix.

I agree it looked very similar, and shared some engineering design with the 3.2/3.6 Pentastar engines, but you have to consider that this Maserati version is direct injected AND turbo'd, too, which may explain some of the bearing wear. As for the chain guide destruction, I suspect heat cycles is the problem and maybe the heat from the turbo is the deciding straw. Really impressed by the machine work, especially the bottom end. Jewel of a crank shaft.

@2008solsticegxp

11 ай бұрын

The bearing and wear we were seeing, Was caused by lack of maintenance with oil changes.. The sludge build up was a good give away for that. I personally own a Maserati Ghibli. In the forums we have people all the time complaining about how much an oil change costs as the dealer. We also have people post with engine failures. You ask them where the dip stick is in the car... They can't tell you. So many people seriously think because its a Maserati, they don't need to check the oil and taking it in each year is all you need to do.

@ronaldderooij1774

6 ай бұрын

If cycles are the problem, they should engineer better chain guides that can handle the cycles for at least 20 years (or about 8000 cycles).

Those castings are amazing!

Awesome for giving us something (mostly) Italian. This, the Northstar, and the 1.0 crap Ford motor..I love this channel. You're on a roll.

Ivan from Pine Hollow Auto Diagnostics repaired a similar timing issue in a customer's car about 6 months ago - seems like a recurring theme with these engines...

@froggy0162

11 ай бұрын

That was an annoying video - he spent the whole time complaining about Maserati while working on a Chrysler engine.

@Hankie56

11 ай бұрын

@@froggy0162 mind you, it was a roadside repair!

@froggy0162

11 ай бұрын

@@Hankie56 No, he did it in his workshop. I’m a long time euro car owner here in Australia, and part of the reason I still do my own repairs is I’m sick to death of the whole “it’s eurotrash and built weird” crap from people too lazy or thick to learn new things…

@Hankie56

11 ай бұрын

@@froggy0162 Sorry, must have been confused, but totally agree. When I see the lack of maintenance on those cars (any car in the US?) which brand will ever make 200K?

I reckon you could make an entire one-hour episode out of which fasteners various engines use, the reasons for the choices, and whether this does or does not suck when it comes to servicing and disassembly.

@mark37f

11 ай бұрын

I would die content if I knew why GM used a Allen bolt on the lower drivers front head whilst the rest of the Gen V head bolts are hex...

Tonight's teardown is the first time I didnt watch these on my phone. Watched it on my 32" gaming monitor. A whole different level of visual details. Not all of the visuals pleasant. Like a horror movie. Valve cover would look good on the garage wall.

Thank You Bill!

The engine internals are beautiful - now we know why these engines are so expensive. It's all the time they spend polishing their rods.

@stephenw2992

11 ай бұрын

I thought it was just the salesmen that spent all their time polishing their rods trying to sell overpriced Italian junk

@karmann123456

11 ай бұрын

😢

@philhenderson3516

8 ай бұрын

@@stephenw2992 This engine ain't even Italian lol! More like Italian branding...

@stephenw2992

8 ай бұрын

​@@philhenderson3516I didnt realise it was assembled by Ford in America. I thought he said they just supplied the block and some parts.

For the record, you should be able to grab every one of those bolts with your impact. Put a bigger battery on it and let it struggle for a few. The hammer function slowly breaks them loose and they will come out after what seems like an eternity. You'll eat up a battery sooner, but the extra Ah will offset that. I use my DeWalt DCF891 1/2" impact for removing tack-welded lag bolts in shipping containers. It struggles til the weld breaks then it just smokes them. It takes a decent battery to hit close to the advertised torque, but us DeWalt fans are spoiled by the Flexvolt line. If you REALLY want to show a Honda crank bolt who's boss, grab a Milwaukee 2869-20 D-Handle 1" Extended Anvil impact wrench with a weighted socket. Something like 2,000lbs of nut-busting torque. It's basically a battery powered semi truck lugnut wrench and designed with that and the railroad in mind.

I was just wondering when you'd do an exotic engine - Can't wait!

for some reason, breaking head bolts loose is always such a satisfying sound

Funny how much it looks like a pentastar v6 with aluminum valve covers.

@tylerexperience8704

11 ай бұрын

It literally has Chrysler logos on the cams I think it’s literally a destroked 3.6 with some turbos on it

@lancenutter1067

11 ай бұрын

Saw the pentastar on the front of the cams too

@KR-hg8be

11 ай бұрын

​@tylerexperience4941 all that work and twin turbos to not make all that much more hp vs a 3.6 pentastar used in minivans. Good job Maserati.

@bastian9653

8 ай бұрын

​@@KR-hg8belmao

Thanks for the engine Bill 😁👍❤

Thank you Eric !👍 Thanks to Bill ! 👍

The demand for rebuilding Maserati engines is probably low (and Bill just replaced his and put this one in the garden) but you seem to have a collection of fairly good, and fairly expensive 'components' from this one; you just can't call them 'parts' with a Maserati.😁 I enjoy seeing different engines and 'exotics' (loosely used here) is a treat.

That filter was probably stuck because it was aftermarket. Run in to that with VW/Audi all the time. I’ve had multiple VW 2.5 5 cylinders with low oil pressure lights on because of an aftermarket filter. They don’t seal in the filter cap correctly. And yeah, the whole time I was watching this video all I could think was “Wow, looks like a very fancy pentastar.”😂

@TassieLorenzo

11 ай бұрын

It looked like an OE Purflux filter with the zig-zag pleats to be me. French oil filter company Purflux usually supplies most modern Ferrari and Maserati oil filters. Interestingly, Fram used to supply Ferrari oil filters back in the 1960's long before Fram bought Purflux.

@JohnEvans-ct6mz

11 ай бұрын

@@TassieLorenzo Good to know. I know VW has a couple of OEM vendors for oil filters. Most are Mann Hummel and the ends are a almost like dried liquid of some sort. Others are plastic at either end with rubber seals. Those are the ones that usually don’t fit and either won’t fully seat, or get stuck and pull the guts out of the filter cap.

Thank you Bill ❤️

Fun and interesting video, as always!!! 😊

I think it'd be fantastic if someone sent you a late model Porsche engine out of a 911, Boxster, or Cayman to tear down. They're quite different from ever V-something you tear down regularly.

@mikek5298

11 ай бұрын

“Someone”? What’s wrong with YOU?

This was an interesting engine teardown, lots of similarities in the heads to the pentastar, and an interesting cross between inexpensive design especially in the timing circuit while having very high build and machining quality in the block. Would be interesting to see if these routinely have timing issues or if it's just a function of crap maintenance since these depreciate like lead balloons falling from the sky and are the star of every buy-here-pay-here lot.

@toshy

11 ай бұрын

Nope, it's the first time I hear about a chain guide failing. They do have issues with the oil pumps tho.

@texascityrc8660

5 ай бұрын

You must not be too familiar with Bmw or Mercedes? in fact Maserati isnt even in the top 5 of fastest depreciating vehicle manufacturers. Bmw and mercedes lose their value much faster than maserati. just go take a look at KBB values... you can get a 2016 S class for less that 15k with minimal miles if you look for more than about 2 min. these depreciating comments get me every time! Go get informed!!

Thanks Bill! 😊

These are famous for jumping timing on the side with the non ratcheting hydraulic tensioner. Usually low/poor oil or I have even seen an impacted oil filter on these. They recommend like 10k miles between oil changes.

Do a 7.3 IDI! Cheap cores, and lots of them died to cavitation which would be interesting to see. Good old work horses, lots of them still around so parts would sell, especially if you get a factory IDIT.

@mikek5298

11 ай бұрын

Send him one.

@zf9903

11 ай бұрын

@@mikek5298 Since you’re the kinda guy that seems to think everyone keeps cores laying around, maybe you’d have a few on hand, so would you mind? That would be very cool of you. :)

@I_Do_Cars

11 ай бұрын

They’re actually scarce around here because of their age and rust.

Looks like an interesting collaboration… too bad Chrysler couldn’t cast their own stuff that beautifully and not inject their own cam issues into it. I’ve heard stories of these with the same cam and follower issues as the 3.6.

26:50 be careful pulling a breaker bar like that, I’ve accidentally punched myself right in the Toyota water pump 😂

How can't auto manufacturers figure out timing chain guides yet lol

@marlu6373

11 ай бұрын

they don"t want to ,they want the engine to go bust so we are forced to buy new ones.

@Kellen6795

11 ай бұрын

If they wanted the timing to last, they'd use gears not chains

@mikekokomomike

7 ай бұрын

​@@Kellen6795300 Ford chiming in 😂

I personally like to call the loud headbolts the chatty ones because of the amount of noise they make, and the ones that make no noise at all, the silent ones.

@Berley_1234

11 ай бұрын

kinda like your farts huh

I usually see spectacular machining and really nice designs on the higher end cars. They want you to really appreciate the effort they put in to make up for the crap quality of the actual critical parts. Maseratis are especially bad. They put a huge amount of time and resources into designing and building the best looking car you'll ever see on the side of the road.

I love hopping into a $100k Maserati, and feeling like I just entered the interior of a $30k Chrysler 300. It's almost like Fiat owns both Maserati and Chrysler, but that would just be silly...

@suzi_mai

11 ай бұрын

Fiat and that other pinnacle of suckitude, Peugeot.

@lustfulvengance

11 ай бұрын

Fiat also owns Ferrari and a bunch of other companies they're the Italian version of VAG

@TassieLorenzo

11 ай бұрын

Are you complaining about the switchgear? The Ferrari 550 used to use the indicator stalks from a Fiat Punto before it went to the modern Ferrari style with no indicator stalks. I don't think it's a big deal IMO. The Maserati interior still tends to have a lot more leather than a Chrysler one. I'd much rather have an Italian car (or French car) than a boring German one! 🙂

Amazing design, and amazingly bad care it's been exposed to!

Thank you Bill.