Be sure to checkout my video playlist for fitting 35s! kzread.info/head/PL-IN_9dyC2sAaiRu78WsbSrbcchxnvbtb

@levmaxgaming

Жыл бұрын

😅

Brian another great tutorial video. Nice job on details and the specifics other may run into completing this mod.

Been waiting on this one 💪💪💪

Enjoyed your video. Well done and thanks for all the tips which I always appreciate.

Another great video Sir

Nice job!!

I was surprisingly calm watching this lol looks fantastic!

Nice job!

Looks way better lol great video!!

Replaced my oem 2006 Tacoma steering wheel with a 2016 Corolla one and it looks awesome!! Thank you for the guide!!

@faascencio

3 жыл бұрын

Any more info?

@faascencio

3 жыл бұрын

Did the buttons work?

@elvisgomez3202

3 жыл бұрын

@@faascencio I think it will work if you get the harness from a 2014. I haven’t gotten it because I did not used them at all before swapping the steering wheel. If you got the money, I would suggest you to replace it it looks so much better.

👍 Great work 👍

I used trimlok on my fenders after I cut them, looks pretty good

Awesome!

I really want to do this on my 4th gen 4runner. I'm a bit intimated. Thanks for showing the process

Imagine this guy being your neighbor lmao

@nsbtacoma6650

3 жыл бұрын

poormofo1 id be stoked

@Tacomaholic

3 жыл бұрын

I'm a constant source of entertainment for the neighborhood.

@hikesbikesbrews

3 жыл бұрын

I was thinking the same thing-looks like he lives in either a townhouse community or just homes super close. Hopefully they're friends...

Great video! How did you re-attach those two metal brackets you took off and repainted in the rear?

@Tacomaholic

5 ай бұрын

Kind of hard to explain but I think I ended up just either flipping them or turning 180 degrees and they lined up nicely and then attached with some stainless steel hardware. Been awhile so I'm not 100%

I may be seeing things, and I could also be wrong.... but that looks like some Dragonlance (Dragons of xxxxxxxx Series) and Forgotten Realms (Drizzt Do'Urden series)? From maybe the early 2000s release? Awesome video, VERY helpful as is your Dobinson snorkel install video, bookmarked for next month or April when I do my own. Would it be more efficient to do the CMC at the same time as trimming the fenders?

@Tacomaholic

3 жыл бұрын

Ha ha oh yeah I've read tons of the Forgotten Realms books. Doing the CMC at the same time probably wouldn't really make much of a difference as far as efficiency goes ... but it could be useful since you are already in the cutting/chopping mood.

Great job, very impressive. If I did that it would look like an idiot with a saw got loose.

The bigger tyres are looking good. How do you think they will handle snow? I'm running nitto Ridge grapplers and they are great off road and on road... But not very snow friendly.

@Tacomaholic

3 жыл бұрын

Yeah snow seems to be the main weak point for most MT. Guess I'll see this winter. 😀

Did you have to modify any part of the firewall like hammer the pinch welds? I have similar UCAs as you and every other video of those running 35s, are using JBA or SPC..I assume they aren’t rubbing on their either?

@Tacomaholic

2 жыл бұрын

Yeah I hammered the pinch weld flat for 33s and lightly hammered parts of the upper fenderwell for the 35s. I have a 1" body lift which helped alot with the rubbing.

Great video!! Sounds like you been playing with a balloon by letting out the air. Lmao!!

@Tacomaholic

3 жыл бұрын

🤣

If you would've done 3 inches, would that have cut off the bottom mounting hole for the fender? I don't have a body lift or planning on getting one and I am thinking of doing 3 inches and tackling it this weekend (10/24/20). Also, I think that's why it looks like in your video you didn't do the complete 2 inches towards the bottom of the front fenders, right?

@Tacomaholic

3 жыл бұрын

3" seems to be the norm when other guys cut there fenders but I'm not sure if it would get rid of that mounting hole.

Where did you get those stickers bro looks very badass

@Tacomaholic

Жыл бұрын

Which ones?

Wow....much braver than me....question for all Holics....I have a Gen 2 with only one key, ignition and door. Does the same key supposed to work for the tailgate or is that a separate key? Thanks all

@Tacomaholic

3 жыл бұрын

The 2nd Gens did not have a locking tailgate option, but if you add something like the PopNLock then you can code it to your ignition key.

@robertmacdonald2735

3 жыл бұрын

@@Tacomaholic My 2014 definitely has a key lock on tailgate with backup camera. I did buy it used so I am not sure if previous oner had a key or the ignition key worked....which doesn't really fit. Or maybe I am looking at a PopNLock....

@Tacomaholic

3 жыл бұрын

@@robertmacdonald2735 I think the PopNLock is the only locking tailgate handle solution for the 2nd Gens.

Maybe I missed a video, but is that a wrap or the magnetic brush guards?

@Tacomaholic

3 жыл бұрын

It's the 2nd Gen Tacoma "GOAT Armor" I covered in this vid: kzread.info/dash/bejne/pKmbu8OImLzNp6Q.html

Whoa!!! Did we just see your VHS collection 😭😭😭

@Tacomaholic

3 жыл бұрын

Vintage porn maybe

@edgarmoreno3748

3 жыл бұрын

Tacomaholic great video no turning back now...I started to cringe when I heard the saw cutting the fenders😱

What do you recommend for replacement fender flares?? My stock ones are coming loose from the body..thanks !!

@Tacomaholic

3 жыл бұрын

Are you just looking for something like OEM?

@neilmosteller2472

3 жыл бұрын

@@Tacomaholic yes something that is easy to install to replace the stock ones.

@Tacomaholic

3 жыл бұрын

@@neilmosteller2472 If you don't go with OEM replacements probably something like this kit from Bushwhacker amzn.to/2EKKtCH

Brian can you please tell me what you did with the inside fender liner on the front? I'm getting ready to trim my fenders, did you just cut some out? Any video how you did your fender liners? Thanks man

@Tacomaholic

2 жыл бұрын

I just removed the entire factory fender liner.

@downsouthsquonks4020

2 жыл бұрын

@@Tacomaholic thanks that is what I figured!

@Tacomaholic

2 жыл бұрын

@@downsouthsquonks4020 Just easier that way. You can trim (or heat with a heat gun to mold it out of the way) but it's a pain.

@downsouthsquonks4020

2 жыл бұрын

@@Tacomaholic I don't have a snorkel and not sure what to do with the breather hole up inside the passenger side front tire.

@Tacomaholic

2 жыл бұрын

@@downsouthsquonks4020 You could reroute the intake to the windshield cowl. That's a popular mod for guys who don't want to add a snorkel.

Brian can you please tell me when jacking up the front how do you keep the Billett UCAS from hitting your remote reservoir hoses? Is there a way I can jack up the front of my Tacoma without making the front suspension go to full droop? Thanks man

@Tacomaholic

2 жыл бұрын

Greetings! The suspension is always going to droop when the front tires are jacked off the ground. You might be able to adjust how you have your reservoir mounted though (probably by moving it closer to the UCA) so the hose won't make contact.

@downsouthsquonks4020

2 жыл бұрын

@@Tacomaholic thanks man, I appreciate your time! I'm digging all your Taco videos! Keep them coming!

@Tacomaholic

2 жыл бұрын

@@downsouthsquonks4020 Thanks buddy!

What gearing did you have on this truck! 4.56 or 4.88 considering it is a gen 2 Taco?

@Tacomaholic

Жыл бұрын

I went with 4.88

is there a way to cut inside the cab to the bed? I've never seen this done before and it would be awesome to have access to the cab from the bed of the truck.

@Tacomaholic

2 жыл бұрын

I'm sure it could be done but would be a pain to make it watertight.

@angell6425

2 жыл бұрын

@@Tacomaholic I hear it cause structural issues. Some say that's not true, however. I wonder if a body shop would have something other than a according plastic to seal it from water.

How many miles have you gotten out of those tires?

@Tacomaholic

3 жыл бұрын

About 30 so far. They are holding up great. 🤣

@Meeks3

3 жыл бұрын

@@Tacomaholic Right now I'm running STT pro Cooper Tires and they are amazing!

@Tacomaholic

3 жыл бұрын

@@Meeks3 One of my wheeling friends had those and enjoyed them.

@boomchakalaka0

3 жыл бұрын

@@Meeks3 I run those too in 33's on my '03 tacoma. They are seriously the best tire I have used

The reason I don't like a Dremel Tool for a job like this is because it leaves behind a trail of gobs of melted plastic. I probably would have done this on a bandsaw.

No paint on the edge of the metal? Won't it rust?

@Tacomaholic

2 жыл бұрын

I used touchup paint on the exposed edge.

"make some more noise please" hey maybe that person was making a how to video around the corner while you were making all kinds of noise saying the same thing.. JK brother sick video

On my 2nd gen there’s a brace in the center of the rear wheel well did you remove this?

@Tacomaholic

3 жыл бұрын

I can't remember what was there from the factory but most, if not all, of the factory bracing didn't work after trimming that much out of the fenders.

Wait a minute do you keep tarantulas?

@Tacomaholic

3 жыл бұрын

Lol good eye! I've got over 20 of them ...

@edgarmoreno3748

3 жыл бұрын

Tacoma mods and Spider collection...🤔

@LMerchant01

3 жыл бұрын

@@Tacomaholic Nice Ive keep snakes for over 13 years. Tarantulas though I could not do. I love seeing them though out here in AZ.

@Tacomaholic

3 жыл бұрын

@@LMerchant01 I actually had a subscriber send me a tarantula from Oklahoma.

@LMerchant01

3 жыл бұрын

@@Tacomaholic That cool man. They have always fascinated me just cant get over the fear. Last year on my way back from hunting in early October I must have seen 30 maybe more lost count of them. Every couple miles there would be one or 2 crossing the the road.

I bet you drove you neighbors in your complex crazy!

@Tacomaholic

3 жыл бұрын

Of course. That's the whole point. 😃

11:48 The feet of a surgeon.

cant believe they wrapped your truck like that. wrap shops know better to just do the whole thing...the good ones at least

@Tacomaholic

3 жыл бұрын

Yeah that was pretty lazy.

@buffalobmf

3 жыл бұрын

Tacomaholic i would of send that truck right back soon as i found out and made them do it right. Doesnt matter if you planned in keeping the flares forever or not