Ujoint Offroad 4x4 Conversion video instructions!
Автокөліктер мен көлік құралдары
We decided to shoot a new install video for 2021 to supplement our written instructions and to help with the decision to DIY or have us do it here. Email chris@ujointoffroad.com if you have any questions and be sure to visit our website for more info and prices on kits.
Пікірлер: 276
Good video thanks. Got my front spring hangers done. Now I’ll tackle the holes in the frame. Just waiting on my springs. Thanks Chris and crew
Awesome! Thank you! Love this video I ended up with 8 one ton diesel 7.3l vans I bought for a grand each! We're fleet viechle have all records! I placed a bid and thought I was bidding on one! They ask me you want one or all! I payed for all and just brought them home! My wife thinks I'm nuts! I have the transfer cases and front axles To do several 4x4 swaps! I'm excited!
@ujointoffroad
3 жыл бұрын
Yea that went from 0-100 quick!
@Drummer4life016
2 жыл бұрын
Would you sell any of them?
@5.43v
2 жыл бұрын
That's insane profit if you 4x4 swap them
@KnightDriveTV
Жыл бұрын
How did this turn out? Did you sas all of them? I have a 2001 7.3 e450 shuttle bus and want 4x4 converted and solid axle swapped. Looking for assist
@reallyhappenings5597
11 ай бұрын
Oh man. Have any for sale?
Very cool and as always top notch quality. Thanks for sharing.
Sharp looking rig. I remember in the early to mid 1990’s, when we could get a rigged up camper van, darn close to the same builds. Have fun, go Offroad
Awesome install video !
Best channel on KZread. Keep it up, Chris. We love seeing a thorough explanation and details!
@ujointoffroad
3 жыл бұрын
Thanks!
@RVingwithG
2 жыл бұрын
@@ujointoffroad What is a ballpark figure to have you do this and what year van are the best to do this on if I was to go looking ... Thanks
@ujointoffroad
2 жыл бұрын
@@RVingwithG A full turn key 4x4 swap here is ~25k plus goodies/extras. The donor van will depend on your needs/budget.
You guys are artists. I wish I had this skill and talent.
@jboogy2920
2 жыл бұрын
They do very nice work .
Wowwwww such a clear amazing and beautiful video.!! Respect.!!
Nice to see this laid out in a video. Solid
Great job as usual!!!
Great info in this video thanks for taking the time !
Very well done and explained, thank you so much for sharing! :)
Years ago I would have tackled this, but now that I'm older and falling apart, it's going to be: "Do not attempt this at home, these men are trained Professionals". Followed by: "Serious injury or death could occur". Looks great.
@gabrieluribe1852
3 жыл бұрын
Count me in, I'm the same way, and being tempted into buying a 1998 ford E350 Ambulance, at a junk yard and converted into a 4X4 and RV, but for this I'll need the pro's to do it for me.
@idriveaxj5670
Ай бұрын
3years ago, I know, but I'm curious as to what this would cost for product and installation.
GREAT VIDEO! Love all the DETAILS!
UNCLEDOUG SAYS YOU GUYS DO THE AWESOME JOB !!!! ALWAYS LOOKS GREAT !!!
Very professional install and explanations. Looks outstanding!
@ujointoffroad
3 жыл бұрын
Thanks Bob!
This is the ABSOLUTE BEST install video I have ever seen on youtube or elsewhere
@ujointoffroad
2 жыл бұрын
Thanks!
Thanks for this great building tutorial video.
That's a sick looking van. Your work is very impressive.
@ujointoffroad
3 жыл бұрын
Thanks!
SWEET, Now I know where to go to have this done ! ! !
I've watched the other how to video 10 times. I think this one is much better, but I've been studying for a decade now. Lol
Very nice! That looks great!
Great professional job!
🤙🏾 impressive work
Really well done. Thanks!
i want one ,when i grow up! seriously i hooked!
Great detailed instructions fam, I’ve always been worried about doing damage to any car I work on but if I don’t try I can’t screw up lol I’ll feel better installing one myself now more than I did 10mins ago. Thanks for the work, I’m sure I’m not the only who appreciates the detail and insight into how y’all do it
@ujointoffroad
Жыл бұрын
Thanks! That’s why we made it!
Awesomeness explained!
So clean!
Greetings from Reno, Nevada.
I love that van
I loved the colourful flag on the wall. But thanks for this great video.
More of this please!
As a 50-ish single guy that owns an Excursion on 37's and an S-10 Blazer going through a SAS conversion, I really don't need the vehicle space I already have. Then I watch this video, and now I want a van. Thanks a lot. LOL
@ujointoffroad
Жыл бұрын
My pleasure :) Sorry!
Phenom! You guys are Pros! thkU
VERY IMPORTANT! Replace the rear spring shackles! I had one of mine go out in the middle of the desert. Absolute crap design, not something you want to have happen to you. Get the best shackle you can. Good on you Chris for calling that out, it's important.
THANKS A LOT FOR YOUR VÍDEOS
Very impressive, I liked, subscribed and commented. 👍
@ujointoffroad
3 жыл бұрын
Thanks!
Well done gentlemen!
@ujointoffroad
5 күн бұрын
Thanks! All new install video coming soon!
I'll be coming down as soon as I hit the mega million or power ball with my step van. I would like to add a pto for central hydraulics to actuate the pontoons and propulsion to be amphibious and an air compressor to inflate the derigable to fly like chity chity bang bang. Maybe you can cut a deal with B.F. good rich or Goodyear. I love your channel but your step van build keeps me up at night.
Chris show more videos with the interior modifications and exhaust sounds and modifications along with night videos with the lights on please
Makes me want to get a cutaway van and do it for a5 th wheeler hauler
@brycea0225
3 жыл бұрын
That’d be dope. Lots of bed room while maintaining a semi short wheelbase
I’d love to see this video done on your next Class C project.!
@ujointoffroad
3 жыл бұрын
Basically the same except we do it on the ground!
Excellent
You're products and workmanship is excellent!. What is the black paint you used on the frame and various parts?
Amazing video thank you!
@ujointoffroad
5 күн бұрын
Thanks! All new install video coming soon!
I want to have this done to my 1995 E150 🙂 with airbags in the back.
Cool, maybe you can show and RV like this on a quick time lapse video. That would be nice to watch.
Wooooooooooow I want 1!!
I need that van
Leave this to the professionals.
Just what I've been looking for although I have a Chevy Express. Sigh.
nice clean looking off road van whish i could afford it!
Awesome kit and work! Are this van still 8x6.5 lug bolt pattern or its now 8x170 from the F series trucks? Im interested in those wheel spacers! But i still have tge stock 8x165 wheels! Tganks! Great work!!
@ujointoffroad
7 ай бұрын
Thanks! Yes, the E series is still 8 on 6.5. We don’t have any spacer options to keep the 8 on 6.5 pattern
Can I upgrade a transmission to make a e350 reliability tow heavy trailers like a f350 I have a 10 ton equipment trailer and a tiny house but it would be really nice to have a van over a truck
Awesome! Now I think I can do that! Why do you pull the transmission out, to install the T case?
@ujointoffroad
3 жыл бұрын
The transmission needs a 4wd output shaft & housing before accepting the t-case
I have a stock E150 in great shape. I'd like to make it 4WD but don't want to go wild. Can I put a 1/4 ton front axle on it with your front spring hanger kit ?
Great job on this video, super helpful 👍 Sorry if this is a dumb question, but why the spacers?
@ujointoffroad
2 жыл бұрын
Thanks! Nothing wrong with a quality spacer, they widen the trac to match the new F axle and also change the bolt pattern.
@mr.dillpickle
2 жыл бұрын
@@ujointoffroad Thanks for the helpful and quick response!
You guys should try step bits for that drilling at the beginning
@ujointoffroad
Жыл бұрын
Hole saws work too
What trucks used a divorced transfer case I want to convert a older dodge on a budget it’s a 90
Greettings from GUATEMALA CENTRAL AMÉRICA I'M MANUEL
Hola que precio tiene las adaptaciones
Q: when you cut a hole in the bottom of the body for the 4WD shifter pass-through, shouldn't that be sealed with a rubber gasket to prevent water from coming in and ruining the carpet, etc.?
@ujointoffroad
2 жыл бұрын
You can if you want to, we never have and it has never been an issue.
You leave that interior carpet sticking out the bottom hole? What happens when water splashes up there?
Can i do a 2014 ford e250? I do vanlife and want to convert to 4x4....I have a lift on it now....4.5 inch
hey great video ...i love your builds .... could a guy weld the front leaf mounts to the frame? thanks for your time
@ujointoffroad
3 ай бұрын
Thanks! You "could" but the inside of the frame is hard to access because of the radiatir/etc. And, if the hanger ever became damaged it would really suck to swap out if it were welded.
@brenthuard3139
3 ай бұрын
great thanks for your time ... we just got the 6 inch lift kit from you guys... quality is on point 👍
Maybe add a rubber boot to the bottom of the t-case shifter to make it weather proof........that's what I do on my vans:)
@ujointoffroad
3 жыл бұрын
Some guys have, we don't provide it since its never been an issue.
@justinmeyers4764
3 жыл бұрын
Interesting idea I hadn't thought of. I can see reasons for both.
It would be amazing to have these trucks steer with a tight rack and pinion system. As they come they drive all over the place.
@ujointoffroad
10 ай бұрын
Our conversions steer great, a rack/pinion isn’t compatible with a solid axle
I have not read any comments so apologies if it’s been said already but boy wouldn’t you save yourselves a lot of time and aggravation drilling with a hougen-rotabroach mag drill? They are so nice and not that expensive. They are just a joy to use compared to other methods such as how I see you’re doing it. But maybe there is a reason that I am not seeing. You guys are certainly experts.
@ujointoffroad
2 жыл бұрын
We looked into that years ago, they didn't have enough travel and were too big to fit in the area we need to drill. But yes, would make the process easier!
Nice brother question where can i find the Kitt to convert it to 4x4? Thanks
@ujointoffroad
8 ай бұрын
Ck out our website
@JaimeArturoRuizCota
Ай бұрын
@@ujointoffroadcuanto cuesta?$$$ Precio de ese vehículo
do you ever have to beef up the frame or any thing else when converting a vehicle to 4x4?
@ujointoffroad
3 жыл бұрын
We just add our front frame support or a front bumper to add strength to the front frame horns, that's it.
Donde puedo comprar el kit?? Para chile
Had a question... I see and like the manual 4x4 shifter .. for floor space to have or use a swivel seat .. do you have a electric dash knob similar to factory ???
@ujointoffroad
Жыл бұрын
We don’t do any electric shift but we do have a 2pc shifter upgrade for swivel seats
Ihave a 2013 E-150 with a 4.6 engine and 4r75e transmission, I can do the 4x4 conversion with these features. Thank you   Traducción en vivo
Chris sent you an email looking forward to hearing from you so I can get started
P.S leaf springs would be Fine for me !
Where are you guys located. Thanks
@ujointoffroad
7 ай бұрын
www.ujointoffroad.com/contact-us/
Can you solid axle swap and re-gear a 2001 7.3 e450 shuttle bus? I'm in Vegas and looking for a shop to get it done.
@ujointoffroad
Жыл бұрын
Yep, we can send a kit for that! Email chris@ujointoffroad.com for an exact estimate.
Is leaf spring the only good option? F350 2005 already come with coil
@ujointoffroad
3 жыл бұрын
In my opinion, yes. 05/up axles are plagued with death wobble
I just bought a 94 e350 shuttle bus im looking to lift im assuming they picked up 1 too many fat chicks with it and the step is about 3 inches from the ground
Where are you located and what is the approximate cost to do a 4X4 conversion on a 2001 Ford E350 with a 7.3 Diesel engine?
@ujointoffroad
3 жыл бұрын
We're in Fletcher NC, ~25k for a turn key install here
Hi, great video ! I have a 2008 E350 with a 5R100W transmission, i want to swap the van to 4x4. Wich kit i need to buy ?
@ujointoffroad
2 жыл бұрын
Thanks! This one! www.ujointoffroad.com/product/4x4-conversion-kit-6-2008-10-6-0/
@rudeman1914
2 жыл бұрын
Hi Chris, If I buy the kit, do you have anyone here in Orange County Ca. That can install that you know?
Is there a version of the 4x4 kit that comes with no lift? Or do all kits need to be lifted
@HamidNawaz301
Жыл бұрын
Also, Does the 5.4 kit also apply for the 4.6 Variant?
How much is the cost of the entire construction kit?
@ujointoffroad
7 ай бұрын
Quite a few options, ck our website to see all of our kits
Would you guys consider doing a 4x4 conversion on a 2001 dodge b1500 ram van?
@ujointoffroad
9 ай бұрын
We only convert the E series chassis. That Dodge doesn;t have a frame so it won;t be easy to convert.
Hello, I watched your video with pleasure. I am writing to you from Mongolia, I have a Ford E150 and have long wanted to make 4x4 after your video, this desire has become stronger Can I buy a conversion kit from you? if so, on which channel to shoot with you . thanks for the answer
I like the idea of tackling this myself. But I can also see getting deep into this project and screwing it up badly. That being said, what does it cost for you to do the install?
@ujointoffroad
3 ай бұрын
Our labor here in NC is ~4500 for a turn key swap
Any 4x4 kits with no lift? Or at least the minimum amount necessary? And as stock as possible.
@ujointoffroad
2 жыл бұрын
Not possible to fit an axle under there with no lift. Minimum 4" for us.
Why use leaf springs? It's okay to mount in the crumple zone? You get death wobble this way?
@ujointoffroad
Жыл бұрын
Simpler, more durable (no death wobble) and the ride/steering/handling is better. These custom leaves will out articulate coils/radius arms too.
Why not weld some of that front spring mount? Just curious
@ujointoffroad
3 жыл бұрын
Hard to access the inside, bolting/sleeving makes it stronger,m
Hey a Chris. I have a 1995 E350 dually ambulance that I would love to upgrade to a 4x4. I know you guys don't do the installs yourself on older vans. Could you let me know if you have any recommendations on who/where could do the installation with your kit? Also have you done this for dually ambos before? There's no way I could DIY this.
@ChicksThatFix
Жыл бұрын
Did you ever find anyone to do the install for you? I have the kit and now need the work done
@CodyCrafted
Жыл бұрын
@@ChicksThatFix We're currently doing a dually ambulance install right now. In the DFW area
@ChicksThatFix
Жыл бұрын
@@CodyCrafted nice! I’ll keep an eye on your channel for updates
Great job what’s the cost for the conversion Great Job
@ujointoffroad
2 жыл бұрын
Thanks. Ck out the website, lots of options!
4x4 shifter boot or cover on the bottom?? Moisture, Rodents, Bugs. Everything else is so factory finished please tell me there's something for that spot.
@ujointoffroad
3 жыл бұрын
We never have, has never been a problem.
@BrettJGoff
3 жыл бұрын
@@ujointoffroad gotcha. Well your many yrs in so I'm sure it isn't wrong. :)
Is there a reason you are sticking front spring leaves ? instead of going for F250-F350 front diff assembly with the Ford coil springs that fit exactly E van front spring wells.
@ujointoffroad
Жыл бұрын
Coils are prone to poor handling and death wobble. Leaves are simpler, more durable and drive/steer/handle better than coils
Curious as to why the leaf spring brackets aren't welded on?
@ujointoffroad
2 жыл бұрын
Hard to weld the inside of the frame, if damaged they’d be really hard to replace and with the bolts/sleeves the hangers add strength to the frame
Where are you located?
Are those energy-absorbing crumple zones at the van's front frame horns?
@ujointoffroad
3 жыл бұрын
Yep, I've yet to see a crumple zone crumple on the E series.
@dadgarage7966
3 жыл бұрын
@@ujointoffroad Good to know. So where do E-Series frames buckle most often in front-end collisions?
@ujointoffroad
3 жыл бұрын
@@dadgarage7966 usually at the big seam behind the coil buckets
I've been thinking about doing this to my 2006 E250. Can it be done?
@ujointoffroad
2 жыл бұрын
Yep!
Look like trail gear shackles and frame sleeves
@ujointoffroad
2 жыл бұрын
Not familiar, we make all of our own stuff.
what does a project like this cost if i bring my van down to your shop for installation?
@ujointoffroad
2 ай бұрын
~30k for a turn key swap here