Creating videos takes lot of time and effort. If you want to support such videos and keep the channel sustainable, please consider below options: 👉 Join Channel Membership: kzread.infojoin 👉 Support directly via PayPal: www.paypal.me/StructuresExplained 👉 Applaud (if available in your region)

@kennyomega8937

Жыл бұрын

Bro which software you used to make this video

Thank You, Saw all your videos on columns, beams and stairs. Excellent explanation with lucid video. Brief and concise. Its a great help for non engineers to understand construction. A must see for all those who are planning to start constructing their houses. once again ,Thanks and great job.

Easy abs clear explanation

Excellent explanation thank you for sharing

Earned a sub, thanks for this!

Really good explanation 😃

Excellent.

Very nice informative

Well explanation

Good job!

Very nice

So amazing

wonderfull Sir

Great video

Thank you for the video. Do the stirrups need to extend all the way to the lower reinforcements or can they terminate to another reinforcement just above them?

I liked the Video

Go on sir wonderful explanation

@civilsitework9058

3 жыл бұрын

kzread.info/dash/bejne/gIWczZKppsy4cZc.html

wow!!

Nice vids very informative, sir may i ask what is the minimum or standard height of tie-beam from the footing foundation? many thanks for the feedback..

Thanks for video

@StructuresExplained

3 жыл бұрын

You are welcome!

Excellent explanation but, should be more details about top bars or Crank bar for continuous beam

Good going sir,,👍

@civilsitework9058

3 жыл бұрын

Subscribe for more videos kzread.info/dash/bejne/gIWczZKppsy4cZc.html

How do they workout the bar thickness?

what is the spacing for the stirrups??

Make a video about reinforcement of cantilever beam.

Hi. with what software do you make these videos? Thanks in advance.

Will the beam be more rigid and resistant to sagging if stirrups are arranged diagonally to form triangles as done with steel trusses?

@robertweekley5926

Жыл бұрын

Also, placing Rebar bent in a soft "z" shape, as in 1/3 length Flat, 1/3 Bent 30° to 45°, and last 1/3 Flat (Horizontal), to both form a Truss like connection, and tie to upper and lower rebar together?

good luck

Good video sir. Please what software are you using to create these video?

@Layput

3 жыл бұрын

He said Blender.

@Innotutorial

3 жыл бұрын

@@Layput ok thanks

It's a nice video but I would like to correct you here that...You said when depth is more than 900 mm than we provide side face reinforcement but as per IS CODE : 456-2000, CLAUSE - 26.5.1.3 ,Pg no. - 47...It is clearly mentioned that if depth > 750 mm then we have to provide it and the spacing between them should not be more than 300 mm.

@StructuresExplained

4 жыл бұрын

Hi Bhanu, thanks for your comment. Quoting from the video "These reinforcements are generally provided to deep beams which have depth higher than 900 mm or 36 inches. This value of depth differs from code to code." it is mentioned that the depth value differs from code to code. The value of 900mm is provided in ACI318 and you correctly pointed out that IS code mentions depth as 750mm.

@sanguine6071

4 жыл бұрын

@@StructuresExplained thanx for the information and reply

@CivilAbhyaas

3 жыл бұрын

Beautiful conversation... I would like to add something. In case of torsion in beams as per IS:456:2000, THIS DEPTH IS 450 MM ONLY.

@CivilAbhyaas

3 жыл бұрын

750 mm is for flexure only....

where is bent up bar ????

Very nice informative