TUTORIAL: Burying Racing Stripes: Part 1 | Sketchy's Garage

Автокөліктер мен көлік құралдары

In this video, we show you how to prep, paint, and bury stripes on a steel aftermarket hood for a 72 Chevelle. If you are just starting out and are thinking of getting into the auto body painting game, my advice is to take a leap and make an investment in a GOOD spray gun set. A cheaper one will get the job done, but you will encounter more issues and have some troubleshooting on the back end to correct. The same holds true for your paints. We are using Diamont Basecoat in this video. All that being said, I will list the products I've used below, in case you're curious, or looking to acquire your own. Thanks for watching!
Basecoat Spraygun
amzn.to/39XtVBf
Clearcoat Spraygun
amzn.to/2v9E6UE
Primer Spraygun (not shown in video)
amzn.to/2VfXji7
Tack Rags
amzn.to/2vZWTBI
Respirator
amzn.to/3c09ntL
Nitrile Gloves
amzn.to/2Vh5v1q
Rubbing Alcohol
amzn.to/3a02FlS
3M Masking Tapes
3/4”
amzn.to/39WMEgd
2”
amzn.to/2PkXIvM
Microfiber Cloths
amzn.to/2v9vLjP
Seamstress' Soft Tape Measure
amzn.to/2VhprS8
Tape Measure
amzn.to/2PjawTI
Blow Gun
amzn.to/3c7rcr5
These are affiliate links. Clicking on them and even purchasing from them doesn't cost you anything, but I may earn a commission.

Пікірлер: 41

  • @victorbelmares2722
    @victorbelmares27223 жыл бұрын

    Fixing to paint racing stripes on 71 El camino black with white racing stripes your video sure helped I've been painting 38 year's but it's been a long time since I've painted stripes

  • @SketchysGarage

    @SketchysGarage

    3 жыл бұрын

    Thanks, I'm glad it helped you out that was it's purpose.

  • @elsdp-4560
    @elsdp-45604 жыл бұрын

    THANK YOU...for sharing. Excited to see the final finish. Looking good.

  • @SketchysGarage

    @SketchysGarage

    4 жыл бұрын

    Thanks for your support!

  • @tech1947
    @tech1947 Жыл бұрын

    Just a suggestion. Better placement of the camera. Thanks for the info.

  • @SketchysGarage

    @SketchysGarage

    Жыл бұрын

    Thanks for the feedback, we will try multiple angles next time.

  • @RobertBrownbrowncone
    @RobertBrownbrowncone2 жыл бұрын

    Awesome video thanks!

  • @SketchysGarage

    @SketchysGarage

    2 жыл бұрын

    Thanks I appreciate it.

  • @jaymadill4735
    @jaymadill473511 ай бұрын

    Nice looking job

  • @SketchysGarage

    @SketchysGarage

    11 ай бұрын

    Thanks we appreciate it!

  • @ArtDaBarber619
    @ArtDaBarber6192 жыл бұрын

    Wish you had a camera at the front end to show how you did your measurements.

  • @SketchysGarage

    @SketchysGarage

    2 жыл бұрын

    The measurements are actually the tape. The 2 inch tape was off the leading edge of the hood. If you got any more questions I'm glad to help.

  • @timothymaiden1345
    @timothymaiden13454 жыл бұрын

    Looking for that part 2 but have seen the end result. Great job scotty and keep um coming !!! Who knows one day maybe ill see mine on here with u working on it. Ha

  • @SketchysGarage

    @SketchysGarage

    4 жыл бұрын

    Part 2 is coming..we do life in between all the things. lol

  • @SketchysGarage

    @SketchysGarage

    4 жыл бұрын

    Here ya go! kzread.info/dash/bejne/c2aNu8uij6-xaKQ.html

  • @nopro5433
    @nopro5433 Жыл бұрын

    Great tutorial Man I Subbed.🤙🏼

  • @SketchysGarage

    @SketchysGarage

    Жыл бұрын

    Thanks we appreciate it!😎

  • @heatherwalker7119
    @heatherwalker71194 жыл бұрын

    Great job! I can't wait to see how it turns out!

  • @SketchysGarage

    @SketchysGarage

    4 жыл бұрын

    Thanks! Part 2 is now up.

  • @Tracks777
    @Tracks7774 жыл бұрын

    nice video

  • @SketchysGarage

    @SketchysGarage

    4 жыл бұрын

    Thank you!

  • @teabag402
    @teabag4024 жыл бұрын

    Vickie Williard says hello and keep up the great video's!

  • @SketchysGarage

    @SketchysGarage

    4 жыл бұрын

    Thanks, Vickie! Hope you're well!

  • @teabag402

    @teabag402

    4 жыл бұрын

    @@SketchysGarage do you remember me Scottie? This is your Aunt vickie.

  • @teabag402

    @teabag402

    4 жыл бұрын

    I love your vids, Cindy turned me into them. Keep up the great work!

  • @SketchysGarage

    @SketchysGarage

    4 жыл бұрын

    @@teabag402 Of course I remember you! I'm glad you're enjoying them! Y'all stay safe!

  • @teabag402

    @teabag402

    4 жыл бұрын

    @@SketchysGarage and you do the same. We are working on restoring a 84 1/2 ton Silverado 6.2L diesel and then were going to start on the 89 Camaro. Will be looking out for tips!

  • @r.guardia9107
    @r.guardia9107Ай бұрын

    Great video. 👍 What kind of base coat is this? I couldn’t make out the brand when you mentioned it. Thanks

  • @SketchysGarage

    @SketchysGarage

    Ай бұрын

    It is Diamont Basecoat and Glasurit 460 clear. The color is very gorgeous it has a blue cast to it in off light. Thanks for watching!

  • @Hogenson77
    @Hogenson7720 күн бұрын

    This is exactly what colors im going with on my chevelle. Did you find the gold paint code? How lighter would a champagne look vs this gold i wonder?

  • @SketchysGarage

    @SketchysGarage

    20 күн бұрын

    Sorry, I forgot to look. I'll check in the morning and see if I can find it. The champagne would look nice too.

  • @blonby1970
    @blonby19702 жыл бұрын

    Beautiful Work....I hear you saying your using diamont.. May i ask what color codes did you use ?

  • @SketchysGarage

    @SketchysGarage

    2 жыл бұрын

    The Green is Stock # 617754/MG704.85. I'll see if I can find the code for the gold. Thanks for watching 😊

  • @broken5060
    @broken50602 жыл бұрын

    Hi guys. Im just starting on my first paint job on my 2001 Miata. The video with the Camaro and burying of stripes really caught my attention. My Miata is British Racing Green and it got me wondering about a better color. The green on the Camaro is exactly what Im looking for. Is that a "candy" green ? I noticed you applied the green over grey K2. One of the pros in the chat room of House of Color informed me that I would need a black undercoat to make the green pop. Could you give me a color name and properties of what you used on the Camaro. I already purchased black epoxy primer; the base green (Organic green Kandy) and a pewter gold metallic for the stripes. If it doesnt work using a grey K2; Ill need to purchase more Epoxy black sealer. Thanks so much! The Camaro is truly an inspiration. Best color combination I've ever seen!

  • @SketchysGarage

    @SketchysGarage

    2 жыл бұрын

    Thanks I'm glad you enjoyed the video. I will get you the paint codes for the colors we used. As far as the color sealer you used is more up to you. I have found that on most greens they cover faster over a black ground coat, but on a white or gray ground coat they look deeper. If you have any other questions let us know. 😎

  • @broken5060

    @broken5060

    2 жыл бұрын

    Hey guys; I'm wondering what to do to keep the stripes buried I will be painting on my Miata. I've decided to go with a dark candy green similar to what you painted on the Chevelle hood and trunk lid. However; in order to keep it Very dark. I'm undercoating the base with black instead of the gray 2k primer. In order to keep the gold stripes buried under the clearcoat; should I mask off the stripes during the black coat; or the 2K coat under the black. (nor yet painted). Thanks for any advice you might have in this! I'm going for the look of the green and gold striped hood and trunk you did in this video . The best color combo Ive ever seen!

  • @berndrocket517
    @berndrocket5172 жыл бұрын

    How are you doing the front corners where they’re round?

  • @SketchysGarage

    @SketchysGarage

    2 жыл бұрын

    I just bend the tape around. Just go slow to a little pressure on the tape but don't pull it tight because it will narrow the tape if pulled to hard.

  • @bobdown9414
    @bobdown9414Ай бұрын

    Great video. But lose the music. Not enough detail youall doing at the front.

  • @jamespeters1129
    @jamespeters112911 ай бұрын

    Could do without the music

  • @rickpawl
    @rickpawl11 ай бұрын

    I wanted to keep watching this instructive video, but I had to turn the volume all the way down because I couldn’t stand hearing that stupid music starting over and over and over and over again. Otherwise, cool video.

Келесі