I’ve probably watching this 10 times over the last six years, and I keep coming back to Jeff’s videos. They’re top notch.

Thank you so much for that tip about spraying the base color as the first coat as over the tape to keep from bleeding, saved me a lot of headache on a project!!!!!

@HomeBuiltByJeff

7 жыл бұрын

Glad it worked for you mate.

@slickbezhig

4 жыл бұрын

Very slick tip

Great work Jeff, can't believe the quality you are producing in the home garage!! Car looks great, love it. Stan WPO911

@HomeBuiltByJeff

8 жыл бұрын

Thanks mate.

wow that turned out gorgeous

Great video, nicely done.

Thanks mate got some great tips

Well done mate!

I will do this with my GSX 1400. Thanks a lot for the video mate!

That is lovely

nice work Jeff

@HomeBuiltByJeff

8 жыл бұрын

Thanks mate ;)

This video is fucken perfect for what I needed Thanks!

well done

Sometimes Jeff the simplest ways are often the best!!

Great video. Thanks. I'm new to painting and will be painting Matt over 2 different colours. I don't need to worry about the height difference on the line? There will be more paint on one side right?

Thanks for the vid. I'm getting ready to do this tomorrow and I was over thinking it a bit. When you put the tape over the purple, before you hit it with black, does the tape leave any residue that prevents the clear from sticking properly?

@lindz151074

5 жыл бұрын

My question too...i did some rookie stripes and for some reason the clear lifted near the edge of the stripe...tape was a bit old and the paint was from Supercheap so who knows?

How much paint do I need for 12" stripes?

Awesome episode mate, makes me feel much more confident about tackling this in the future. Just wondering how you would go about painting even lines around wheel arches? getting an even line going around the curve is very daunting...

@HomeBuiltByJeff

8 жыл бұрын

That is where it gets more difficult. I would probably mask up the whole area and mark the lower line. Then use a compass or similar to follow the bottom line with the point and mark the upper line to keep an even spacing. Then tidy it up before carefully cutting it out.

@silvermane9370

8 жыл бұрын

+Home Built By Jeff aah the nightmare that is the compound curve...

@sanchezke70

8 жыл бұрын

+Home Built By Jeff legend! Thanks for your reply mate, very much appreciated!

Hey Jeff is you want to stop paint bleed shoot a single coat of the base colour of the masked area first to seal the edges, any bleed won't then show

@HomeBuiltByJeff

8 жыл бұрын

Thanks mate, I did just that ;)

@sacooper802

7 жыл бұрын

i always faced bleed problems then stripping and the tip you mentioned to seal it off with the base coat as a seal is absolutely brilliant.

How much would you charge to paint a 98 Honda accord

Great tips! Did you spray base orange and then clear. Then sand the the clear then put stripes. Then clear over the whole car again?

@HomeBuiltByJeff

2 жыл бұрын

..and then sand it again and clear again to get rid of the edges ;) It is all step by step in the car build series.

@seansadventures-flyingtrav7901

2 жыл бұрын

@@HomeBuiltByJeff Ill check it out..THanks!

Can I just use can spray paint?

Do you wait for the paint to dry before removing the tape? OR do you remove it while it is still wet?

@HomeBuiltByJeff

7 жыл бұрын

Basecoat basically dries pretty much straight away, so by the time you have put the gun down you should be right. But I would leave it maybe 10 mins or so. I wouldn't leave it overnight, as when the paint is fully dry, it tends to chip off little bits.

@IntusMortuum

7 жыл бұрын

+Home Built By Jeff awesome thanks a ton!

@maxsanchez4256

6 жыл бұрын

Home Built By Jeff thank you so much!!! Thank you, thank you, thank you!

Hi you said flo coating ... can you explain a bit more .... how it's done ... what grits you use and how many layers of clear do you use thanks Jeff

@HomeBuiltByJeff

6 жыл бұрын

I explain it more in the Flow coat episode. Basically all of the top show cars get this done, where once the car is completely painted, it is sanded back again completely flat to get rid of any orange peel or other minor flaws in the paint. Then it is given a final clear coat over the perfectly flat base, so the final layer is the smoothest possible finish.

@6655nico

6 жыл бұрын

Home Built By Jeff hello Jeff.... could you send me a link to your flo coat video ...... could you base coat then use inter coat / binder then go over with clear coat for more depth ? Thanks Jeff great vids

@6655nico

6 жыл бұрын

Hi jeff when you flo coated the car .... did you just use 800 wet...or could you do 600 then 800 thanks

@HomeBuiltByJeff

6 жыл бұрын

No. You really need to paint it properly first. kzread.info/dash/bejne/o2uirNOnk7vQoZM.html

@6655nico

6 жыл бұрын

Home Built By Jeff hi Jeff... yes but when you flatted it for flo coating what papers did you use ? Also if you based then used a binder or intercoat could you then go over with 3 coats of clear ? Thanks rich

Do pull the tape after it is sprayed or the next day ?

@HomeBuiltByJeff

2 жыл бұрын

After it is sprayed, very carefully.

Awesome

I want to get stripes on my 2015 mustang, does it need to be repainted to add the stripes?

@HomeBuiltByJeff

6 жыл бұрын

You need to re-clear coat every panel that you put stripes on to do it properly. You can paint just the stripes, but I would never do that, and particularly not on a nice car. If you don't want to clear it all again then just go with vinyl.

@ronneyg33

6 жыл бұрын

Home Built By Jeff thanks brother just need to know my options before I got a shop and they try to fool me....i will look into vinyl Tha is again

How long after painting did you remove the tape? Was the paint still wet?

@sweenep86

8 жыл бұрын

I also do graphics, for polyester basecoats wait till it's fully dry, not just flashed. With enamel based paints unmask while wet or they can skin over and lift

@HomeBuiltByJeff

8 жыл бұрын

The basecoat is dusted on so it is pretty much dry straight away. I don't wet it up at that stage, so the tape can come straight off.

Im going to paint stripes on my car one day but itll be extremely difficult as the lines will be off center and a lot more curves. The car is very round. "Aircooled beetle"

What size canopy is this?

@HomeBuiltByJeff

6 жыл бұрын

Watch my how to build a spray booth videos kzread.info/dash/bejne/haKJz9dpf62YZKQ.html

Jeff, Thank you for making this video - Very helpful! I have wondered about on a base clear having to mechanically open the surface of the base for the stripes to adhere properly. I have a question with regard to when you pulled the tape in the large area (white tape), do you need to worry about the tape leaving any residue? Do you need to wipe with wax and grease remover? Thanks!

@HomeBuiltByJeff

7 жыл бұрын

I actually painted and cleared the whole car and then rubbed it all back again before masking the stripes. If you mask straight over base coat, you do have issues with residue and tape marks. Even doing it the way I do it, which includes a bunch more clearing, you have to make sure you dust on the stripe colour. If you go too wet you can still soften up the tape and have residue issues.

@89unica

7 жыл бұрын

OK, that makes sense. Did you wet sand with your 800?

@HomeBuiltByJeff

7 жыл бұрын

Yep.

Have you ever thought of using a laser light for a perfectly straight line?

@HomeBuiltByJeff

6 жыл бұрын

That is nice in theory, but you still need to be able to line it up correctly in the first place. This method is much much easier.

@winnipegperfectcircleflyin7859

8 күн бұрын

Its hard to follow a soft edge.

In this video I'm going to teach you how to paint stripes. Okay Australian Jeff Gordan.

Really not lookingmusic