Turning the Old Stump into Colorful Stabilized Wood
Ғылым және технология
To make these pieces of stabilized wood I used a stump of lime wood and a few pieces of birch wood prepared earlier. The whole process lasted about 3 weeks, however, the work itself was about 2 days.
/ mn-projects-3654940871...
Пікірлер: 96
I just spent 6 minutes of my life watching a dude make colored wood, and it was fantastic.
Really nice job, man! And the wood is much more beautiful this way! 😃
Holy moly, this is awesome! I had no idea this existed.
It's really special to see what you do. Congratulations
Nicely done, thank you for sharing!
Very pretty. Nice job!
I love your work!
Perfect work!👍
Прикольно, я не думал, что дерево "насквозь" можно покрасить))) Молодец!!
Wow what a great idea.
Pretty Cool process !!!!!
Respect from Egypt man
I am really learning a lot from you!
Great job 👍
Amazing 👌
Got to love that Cactus Juice.
Awesome :) Definetly going to try this one
man you are awesome!❤
again a very mice project. ♥
Wow, this is very different to your usual creations but it looks outstanding nevertheless. Keep up the amazing work!
Impressive
So just the vacuum and release of pressure was enough to place the dye and resin all the way in. If the wood was thicker I think it would need some pressure chamber after the vacuum.
I just gave the 1000th like to this video 😁👍
Crazy what you can do with an old stump. Noce
Fantástico!!!
Nice Cheers
Dobra robota. Jaką żywyce używasz? Cactus?
Is this what is used to make pen blanks or anything similar, in that matter?
Nice
great result! what brand of resin did you use?
Please do one of your classic knifes with a green handle :)
Amazing job 👍👋What kind of pigment did you put in cactus water, what is its name and brand?
Hallo. When you left the wood in vacuum chamber, is that on or off?
Have you ever tried dying wood, adding color in vacuum, without stabilizing it (so using water instead of resin)? Did the color penetrate to the center or only on the surface?
Wow it's fantastic!!! Can you say to me if i also can use water color and if the process is the same? I would paint but not doing it in hours for 1 piece!!! Thank you ;)
That's real nice. I love the colours! What's it gonna be used for? Knife handles?
@maciejnowakprojects
5 жыл бұрын
Thanks! Yes, handles of knives and other tools. I will leave a few of them for an colorful project
Cool
Great video. Like lots of the other commenters I’d love to know whether the resin you used was Cactus Juice or something else. Cactus Juice is great but it’s so expensive here in Europe and I’ve not been able to source al alternative.
@calderon4128
Жыл бұрын
The resin used is Metyl Metacrylate MMA. That is the methyl ester of methacrylic acid (MAA), it is a monomer produced on a large scale for the production of poly(methyl methacrylate) (PMMA). this resin should be activated before use by means of Metly Etyl Ketone Peroxide (MEKP) at 0.1 % wich is the same activator used for polyester resin. I hope this will be usefull for you.
Hey, nice project as always ;) I thought about stabilizing myself aswell for a long time. May you post the link to the resin you used in the discription maybe? :) Regards from germany :)
@davidostertag7689
3 жыл бұрын
I know you commented this about a year ago, but here is a good stabilizing resin from Germany: www.harzspezialisten.de/umweltfreundliches-infiltrationsharz or if you want to buy a set with a vacuum pump and chamber: www.harzspezialisten.de/Set_Vakuum_Stabilisieren
@andimayermayer
3 жыл бұрын
@@davidostertag7689 Hey, thank you very much for your reply. I am still doing this, so any recommendation is appreciated :) I will have a Look tomorrow! :)
Looks fantastic! Knife handles?
what kind of resign was that and what temperature did you set the oven to ??
Hi, nice results there. Wonder if these stabilized woods are food safe _ Planning a butcherblock cuttingboard and infusing with colour is tempting. But is it safe For knife handles and such I see no problem :) Hope to hear from you, have a nice day. TR
Great video! I have 2 questions how long did you leave the Pieces under the vacuume pressure? What temp did you bake the pieces in the oven? Thanks!!!
@johnsmithfakename8422
Жыл бұрын
I am no expert but some say the wood should be under vacuum for multiple hours (I think 4)
What is the product you used at the end to bring out the shine and make it smoother?
Very cool, information. Can something like this be done with a pressure pot?
@aryaprincess2479
7 ай бұрын
Vacuum does a better job, first it removed the air from inside the wood and then when pressure is restored any spot that previously had air is now soaked with the resin and the dye, of course the bigger the wood the more time you need for this. Pressure does something similar but it doesn't remove the air, it compresses it and the resin can penetrate the wood, once you restore the pressure to normal some of the resin might be pushed out by the air that is still in the wood.
Nice video hmm what i not know is is that wood stain what you fill in or is that colour resin? ( Sorry for my bad English) thanks for the Answer.
What resin did you use? Epoxy or polyester?
Hi ! Can i know what brand u use for colouring the wood ?
What resin did you use, man?
What type of resin did u use for that
How hot and how long did you bake the wood?
Cool. What are you going to use it for?
@xysix2548
5 жыл бұрын
Hooch, this is a sequel to his knife-making video. At the end of that one he promised us he would show us how he stabilized the wood for the handles of his knives.
do u use cactus juice or other resin?
why is the resin bottles turned the same way. please tell us what resin to use
Интересно. Правда, совсем не просто. ))
what kind of resin u used?
hey what is that moisture meter called?
What is resin u used?
So what is the purpose for colouring them?
Would you be so kind to make a detailed video and pass a list of the materials you used, so much the resin, what kind of resin is the time in emptiness you do and all the details please. thank you congratulations.
You should try shou shugi ban
What Color did you use ?
👌👌👌👌👌👌👌👌👌👊
2:01 what is the resin name Where do we get it from?
Next up, wooden Rubic's cube!
The color was added to the resin, which resin was it !? Can anyone share this info :)
@bluverano
3 жыл бұрын
This question has been asked by many people, but it is obvious that the author keeps this sacred secret ... The man just wants to share his joy with the audience.
I wish i can make that
top
Why are people on the internet constantly demonstrating their favorite techniques of cutting their fingers off with a table saw? It boggles the mind.
🖒🖒🖒🌷🌷🌷🌷❤❤❤❤❤
Brasil
buen video,podrias poner enlace del zelmer,gracias
Hacı renk pigmenti ne özellikte olması lazım
Makita mlt100's fence is so bad. Why are you using it? You should make e new fence.
Can you please make dress clips using stabilized wood
can you make a knife handle with that wood pls?
1.
0:11 What is this such a chainsaw ?
@stanislasleroy7808
5 жыл бұрын
He made it! kzread.info/dash/bejne/a6CgzM5rgZbLocY.html
Ukraine
ахуенна братан!
First view
But why?
Be careful.. Someone might be able to tell what kind of polymer you are using.. I see many people have asked.. Don't know why you are making videos if you don't put that kind of info in your notes area.. Bye..
I do not know how for others, but I do not like the look of such a tree, I love the natural color. And then I watched the test video after such stabilization - the tree becomes very fragile. Why so much time and money spent if the tree is perfectly stabilized by coating linseed oil.
Youd probably save time if you microwave them after you wrap them in foil lol
Wut resin u used ?
Fantástico!!!