По моему эти ребята точно знают свою работу! Респект и уважение

@user-gi9rm6ed9r

Жыл бұрын

Соглашусь сделано окуратно и с понятием

اللہ تمام بھائیوں کو ہر قسم حادثات سے بچائے اور اللہ سب کو آسانی سے حلال رزق عطا فرمائے

@waheed418

2 жыл бұрын

آمین ثم آمین

в этом видео прекрасно все- индикатор из гнутой проволки, чистовая токарная обработка болгаркой, прорезка шпонпазов болгаркой)

@venomvenom4810

2 жыл бұрын

особенно ведешка..

@midik123

2 жыл бұрын

Мне интересно как долго это всё потом ходит?

@Dmitriq666

2 жыл бұрын

@@midik123 Маде ин Пакистан. На века.

@user-xo1wr9lw2i

2 жыл бұрын

@@Dmitriq666 🤣👍

@user-eh8yy3qx7q

2 жыл бұрын

Болгаркой хон набивает.

Reusing that welded bolt made my day :)

@channelname9042

2 жыл бұрын

Torque.

микрометр ??? серьёзно ??? как то это не по пакистански .

Ма Ша Аллах , братья вы молодцы, у вас жизнь суровая 😁

Ingenious workmanship. Excellent to see craftsmanship still exists.

These boys are beyond creative….they are smart. They see a problem and they solve it. I’m impressed…..(mechanic for 30 years)

@user-zd6kh8ss9p

2 жыл бұрын

Sure. if your work is to replace oald part with new one....

Блин у них спины железобетонные что ли??👍👍

Nice to see someone does use a hydraulic press rather than the biggest hammer they can find, except when they need to press it back in...

Amazed at the amount of brute physical strength being used! It gives me a hernia (I've had three-nothing nice about that) just, seeing these men do this hard work.

То чувство, когда индийский сварщик лучше делает сварочные швы, чем я самым не дешевым полуавтоматом🤣

@servelor

3 жыл бұрын

зависть в плюс пойдёт! научись и работай в своё удовольствие

@MrKotBonifacy

3 жыл бұрын

Пакистанский.

@user-zb5dl7jf4o

2 жыл бұрын

2.47 ДнепроГЭС можно построить сколько он там сварки оставил

Asombrosa la capacidad de éstas personas... Realizan trabajos duros con un mínimo de herramientas. Es admirable la tenacidad, sincronía, entusiasmo y habilidad manual que poseen y los hacen hombres valiosos y valerosos para su país. -- Un saludo muy cordial para ustedes desde España.

Я когда машину помою, она тоже сразу ехать лучше начинает.

Надо признать, что их гнутые электроды куда лучше наших. Рутил там или основные, это неважно, судя по видео они тыкают просто в ванну и не заботятся, водят они елочкой или восьмеркой, вперед/назад или с подвыподвертом, но швы как на подбор, без подрезов и раковин, идеальные))) мистика

@defrostoff

2 жыл бұрын

думается мне, что от температуры на улице (45-50С) зависит, ну и конечно же гнутость электрода влияет сильно на мастерство. (сарказм) А швы реально смотрю и диву даюсь, ни раковинки

Послн обработки болгаркой самое время микрометр применить

@antongyrt4814

2 жыл бұрын

Обязательно, а то вдруг 2 микрона прослабили)

@_tot_ruslan_

2 жыл бұрын

Хотя бы он у них есть) но чуется, это для видел чисто!

Vocês se viram nos trinta. Parabéns 👏👏👏

Похоже для них, это регулярная работа. Все приспособления, шаблоны и кондукторы готовы, и, видно, что используются регулярно.

@A_Stereotypical_Heretic

Жыл бұрын

Because this is probably the fifth time they've repaired this same break. Garbage in garbage out

Класс!!! Напомнило родную МТС. Как дядька из подножного материала ремонтировал и отправлял на поля технику.

@guliqurbanova697

2 жыл бұрын

Ну да.а я про маску хотел сказат

Loved these videos to watch !! I worked in oil tanker for years and worked with lots of skilled ppl like these

Обратите внимание 15:35 как свет переливается на валу не равномерно во время вращения. Это биение барабана на котором закреплён вал

@A_Stereotypical_Heretic

Жыл бұрын

Garbage in garbage out

สุดยอดเทคนิคของช่างเลยครับ

I love these videos - are those the OSHA approved sandals ? and "We don't need no stinking safety goggles". Tough bunch

Awesome work and workers...nice job ❤❤

Brilliant Job Guys.You are Such hard workers.Not even a proper welding mask .You are a Inspiration to so many.👍👍💕💕

Maşallah elinize bileğinşze sağlık helal kazanç bu işte.

"Mr Gupta. Keep one eye open for the health and safety man".

Если я понимаю ,после токарного сотки они болгаркой ловят?

Невероятно! Сколько гениальных технических решений!!! Гоминидам такое даже не снилось...

oiiiiiiiiiiiiiiiiiiiiiii amigo moro no brasil muito bom trabalho parabéns a toda equipe meu like

EXELENTE TRABALHO DE RECONDICIONAMENTO, PARABÉNS.

Soy feliz viendo sus videos sus trabajos son de admiración por que todos trabajan en equipo eso es muy bueno veo que unos suelda otros tornean y luego pulen la pieza hasta quedar como nueva soy un admirador de ustedes gracias por sus videos me encantan todos los que suben un abrazo gigante desde mi Colombia Dios los bendiga

Nice Repair ! Got Skills !

They work very hard . Why no poured floor? Safety shoes? Maybe some gloves? A dolly with wheels to move that around?

Love the shaft grinding system. True tradesmen. Perfect result with minimum tools.

Dear very interesting video 🤔 “In every day, there are 1,440 minutes. That means we have 1,440 daily opportunities to make a positive impact.”😃

Eles recondicionão de tudo isto é muito bom parabéns

Gostei do serviço amo como vocês trabalham com determinação Parabéns.

Весь світ як ваша майстерня і я в ній - ось ця вісь балансира! Привіт з України від вашого шанувальника!

Ого! Красный домкрат! Знакомая вещица. В одном из видосов, чувак его рукожопил, ручку оторвал и в красный цвет покрасил!

Mamma mia che maestri!!!!!! Saluti da Torino Italia

I like the fixtures and special tools they men use.

@amazingthingtechnology1595

3 жыл бұрын

🥰❤️

Оказывается кроме стрелочного индикатора , существует ещё и проволочный...интересно ,какая у него цена деления?PS: какой класс точности и чистоты у шпоночного паза?

@170119911

2 жыл бұрын

А где там шпоночный паз??

@shura5551

2 жыл бұрын

Это канал для смазки.

修復に秀樹感激Goodです=3

ماشاءاللہ پاکستانی بہت محنتی قوم ہے ۔اگر پاکستان میں فری انسٹیٹیوٹ قائم کئے جائیں تو ہمارے پاکستان کی حالت بدل دیں یہ جوان۔ میں خود سے بھی یہ ہی کام پاکستان میں کئے ہوئے ہیں۔ ہمارے لوگوں کو اپنی سیفٹی کی بھی پرواہ نہیں ہوتی لیکن محنت کرتے چلے جاتے ہیں۔

great job guys keep up the good work from uk

you guys are amazing , great editing .

India is rising in world power, and hard working people like this are contributing to high productivity, which increases power.

@toei4571

2 жыл бұрын

Those guys are pakistani, see the tag on the description.

@A_Stereotypical_Heretic

Жыл бұрын

Too bad this is Pakistan you tool

They roll with some serious truck bling over there lol. Fancy af.

И смех и грех. Но стараются. По этим видно что зажиточные, у них станок есть, новый почти. Перед этим ролики смотрел, там одни ключи и болгарка. Но как пользуются станком и измерительными приборами, просто дичь.

@user-ol8vq1qo6n

3 жыл бұрын

Эти конкуренты тех 😆

@user-ow2oi4mq7m

2 жыл бұрын

я шок такой измирена🌋🌋🌋🌋

16:16 как так, сначала кругом шлифуют, затем микрометром меряют!!!!!!! видимо болгаркой сотки ловят)))))))))))

@vsemgabzdec1945

2 жыл бұрын

убрал ход резца шобы садилось легче

@venturaEIS

2 жыл бұрын

Ты не видел ручной гриндер для финишной шлифовки коленвалов?

Ещё раз приезжайте )))))) не грузовик а какой то веселый карусел )

@MrKotBonifacy

3 жыл бұрын

Ну так тебе надо посмотрит на тайские грузавики... kzread.info/dash/bejne/X36i3NCkdaSYk8o.html kzread.info/dash/bejne/p5qmlppucbHUoMY.html ...и другие.

@user-ol8vq1qo6n

3 жыл бұрын

Карусел, карусел, кто успел тот и сел

@Piligrim996

2 жыл бұрын

Чтобы жить было веселей

Amazing Skill...

Indianos sao os que realmente utilizam os recursos naturais de forma correta. No caso deles por pura necessidade! Nada se sucateia. Excelente trabalho

@m.kandroid3070

2 жыл бұрын

They are Pakistanis...

А техника безопасности, при сварке, вобще на уровне.

Why does everybody insist on pulling these guys down! They do an amazing job with very little. If you were broken down hundreds of miles from anywhere they would get you going. I don’t understand how they work in flip flops and squinty goggles but they do. If you sent them some safety boots and goggles they probably wouldn’t use them. If that job needed doing in the UK first port of call would be the breakers yard for a good s/h unit ( don’t think they have those as they keep thinks going for ever) next it would be pressed apart, turned down metal sprayed then machined back to spec. Pretty much what they did. For this job nearest half mm and a good surface finish is all that’s needed.

@gacherumburu9958

3 жыл бұрын

True

@Russell-1

3 жыл бұрын

I agree with your comments.

@frankbutaric3565

2 жыл бұрын

The machinist was using a micrometer and I would guess accuracy of at least .05 mm.

@rifej

2 жыл бұрын

@Herbert Sattelmeier конкретно в этом случае ничего страшного. Обычная практика. Просто на ремонтных заводах вместо сварки используют напыление металла и вместо шлифмашинки шлифовальный станок.

осы жігіттердің қолдарынан келмейтіні жоқ, мықты жігіттер!!!!!!!

indonesia hadirr,,,, ... mantapp kerjanya,tua muda kerja keras... smoga slalu dberi ksehatan.. amiinnn

As the weld beads were being laid on, I was wondering who would they send it out to and how faraway to get turned down to specs in a lathe. But then there it was……a magnificent lathe sitting there on the dirt floor. Would love to hear the story on that lathe. Way to go guys.

@mercman786

2 жыл бұрын

probably, from Sheffield in the UK

@nealwright5622

2 жыл бұрын

@@mercman786 A 3 jaw chuck would make matey's job easier and probably more concentric

@who-gives-a-toss_Bear

2 жыл бұрын

​@@nealwright5622 Any good machinist would pick a 4 jaw, anyday.

@who-gives-a-toss_Bear

2 жыл бұрын

@@mercman786 Looks to well painted to be an old Sheffield lathe. Looks more like a new Indian lathe, these guys make good gear.

@vandalsgarage

2 жыл бұрын

@Neal Wright. You're exactly wrong. You use a 4 jaw chuck for precision turning. A 4 jaw can be dialed in. A 3 jaw is like your power drill, the jaws all close together, the concentricity is determined at the factory where the chuck is made, and gets worse with time and wear.

You men, very good work, job done, truck back in service, good result.

What’s that sound at 00:22? It can’t be an air gun…..I’ve never seen one on this channel before!

The Pakistani specialist welders. Watching from Philippines.

サンダルと素手で最高！

Hello friends, I enjoy all your videos. A question, do you use 7018 welding rods? Thank you

I love this shop, how many guys does it take to fix this, all of them ha ha Ha ha ha

Безотказный стартап для Пакистана - торговать заранее согнутыми электродами! ))))

Great job fellows .i love doing this kind of wrk..very satisfying

Interesting work, to say the least. 😁👍🇨🇱🇺🇸

Fantastic job. Well done

Работяги ребята. Большое уважение вам.

Вот настоящие мастера, а не те что умеют готовые детали менять

Love the steel tipped Sandles

@Dec38105

2 жыл бұрын

this shit joke every other comment.... yawn

@gruntlima6845

2 жыл бұрын

@@Dec38105 don’t care what you think ..

Какой запас прочности у запчастей после такой реставрации?

@theoriginaljohngalt2450

2 жыл бұрын

Great question! I too would love to know that. Everyone in the comments are all over these guys nuts, but they never ask reasonable and good questions like that. Of course no one will give and answer.

O problema de usar solda pra preencher a peça é que destempéra o metal e depois a peça quebra , não aguenta o peso .

These guys do an exelent job probably on the cheap too great work. I've done plenty of work like this on the fly. By myself took much longer.. Great teamwork guys.!

@amazingthingtechnology1595

3 жыл бұрын

🥰

@user-zb4xq8ko1i

3 жыл бұрын

@@amazingthingtechnology1595 0

@rasputinputin8103

3 жыл бұрын

Do you give the full 10-second warranty on all your work?

Привет! Приятель это все от перегруза и обильной смазки. Удачи

tolle arbeit , liebe grüße aus deutschland

Beleza muito bom 👍👍👍😎

Los felicito muy buen trabajo me gusta mucho ver sus videos

Как я понял, индусам излучение дуги не приносит ожегов

@user-gl6df5bs6h

2 жыл бұрын

они не индусы они мусульмане

@gordg100

2 жыл бұрын

@@user-gl6df5bs6h но нация одна

You folks do amazing work! Thanks for sharing!

Nice work. With so few tools a demanding job. I would ask two questions. Why is there no concrete on the floor in any workshop but only earth, and another question is whether the trucks have to go for technical inspections every year to check the technical correctness

@langlaisjean-claude9418

3 жыл бұрын

ben voyons, avec du béton au sol, ils risquent de se blesser, t'es marrant toi !!!!

@DewanaShah

2 жыл бұрын

Concrete breaks, earth is break proof. No repairs needed on earth as floor. Just spray water in morning, you are good to go. Now there are some fancy garages but they are for cars not road side truck workshops.

@BabarHussainKhan

2 жыл бұрын

Concrete floor is the last thing on their mind😂 they seem happy with earth and sandles

I must say that you fellows got it going on ..for not having a high end shop Reminds me of wrking in the field

I love the 'SAFETY SANDALS'. Especially for the welders.

@MrKotBonifacy

3 жыл бұрын

Sometimes they are better than shoes - if a drop of molten metal lands on your foot you can just fling it away (and it would happened instantly, believe me), while when a drop of molten (or "just" red-hot) metal burns its way into a shoe, then... You can then jump like mad (and you will), albeit it'll be of no help... Well, I've learned it the hard (or rather "hot") way, and now I'd rather weld barefoot than in sneakers or anything like that. So, sandals, in my opinion, are quite reasonable choice in this situation. Granted, THIS DOES NOT apply to a "proper" welder's shoes, but looking at their "safety equipment" I doubt whether anyone in this shop could actually afford a "proper and certified" shoes suitable for welding. I reckon a pair of such shoes cost more than this guy's monthly paycheck...

@palangnar3588

2 жыл бұрын

@@MrKotBonifacy You must be joking ,there is no such things, they have sandals and it is wrong, they don't care, or have money for proper work boots, trust me.

@MrKotBonifacy

2 жыл бұрын

@@palangnar3588 Yeah, yeah, whatever. "Such things" being...? Well, never mind. Shalom.

@palangnar3588

2 жыл бұрын

@@MrKotBonifacy I didn't mean anything bad, they can not buy work boots , because they only make a little money a day, a lot of it got to do with country/government in general, and how they control it.

@MrKotBonifacy

2 жыл бұрын

@@palangnar3588 I'm glad to hear you "didn't meant anything bad", but my problem was I couldn't really get what you meant in the first place, y'see... I just couldn't figure what you are referring to, or whether you agree with something I said or disagree - and what it was. Now I can see that you basically agree with (and repeat) what I said before - their wages are low, so they make a little money and therefore they don't have enough of them to buy a proper PPE (personal protection equipment - safety goggles, hearing protectors, dust masks, welding helmets and/ or shields, hand gloves, proper boots - suitable, in THIS CASE, for welding jobs. And I still stand by the opinion that welding barefoot is better option than welding in shoes/ boots that would allow pieces of hot metal into them - like this lady's shoes in this video: kzread.info/dash/bejne/aaF5vLiSZ8XXY8Y.html . But you don't have to agree with me (hey, it's a free world, innit?) and I'm perfectly OK with you thinking some sneakers or tennis shoes would be a better choice. And that's it, and that's all. PS: I'm not going get involved into any "government running country" and other stuff like that - that is a clearly private business, people work there by their own choice (or "choice"), it's about money and "general prevailing work safety (or lack of thereof) attitude" there, and I'm just not touching this can of worms. While I've been to Pakistan only occasionally and for a short period of time (and that was well over twenty years ago), I did, in fact, spent a great deal of time in India in the '90s, and I can tell with a confidence that the only thing that sets apart "Indian workshop" from "Pakistani workshop" is the style of clothing of the workers and the alphabet(s) they use on their signs - and everything else is just about the same (or "on par", at least). BTW, that "Palang Nar" sounds like Bahasa Indonesia... or is it Tagalog? Cheers.

Nice welding 👍👍

Brilliant can't see that welded end piece after turning looks like new factory finish

Amazing how they getter done with basic tools. Tenacity I think might be the word. Human ingenuity at its finest.

@MrMikucki

2 жыл бұрын

Never knew a lathe was a "basic" tool

@BabarHussainKhan

2 жыл бұрын

Necessity is another word.

Os cara é doidi mai da conta sô!

И почему индусы все еще не на Марсе ?! 😂

@igorsams5413

2 жыл бұрын

потому,что это не индусы !))

brilliant welding guys

Its amazing what you can do with your hands.

I noticed the yellow oil can they are using is the same one Availible on Amazon 👍😃😃

А что канавки под смазку не сделал токарь?

I love these Vajayos so much! living in the disposable society just shows how others value and save what would be thrown away in most places. You have 4 men working n this at any given time, I wld love to know what they charge or this and how much the part they are fixing cost new?

микрометр зачётный!))

I now have the courage to weld in my sandals.

@fabrigasan2150

3 жыл бұрын

Il tasso di infortuni deve essere molto elevato , capisco che fa caldo in Pakistan , ma le mani e i piedi sono importanti , ecco perche’ sono sempre in tanti a fare il lavoro , uno e’ la riserva di quello che in giornata se ne va al Pronto Soccorso…🤐🤐

@dirtfarmer7472

2 жыл бұрын

They’ve all met men in town that have lost toes & fingers, that’s pretty good motivation to keep their fingers & toes out of the way

Bravo love from Serbia 🇷🇸🇷🇸🇷🇸🇷🇸👏👏👏👏👏👏👍👍👍👍👍👍🙏🙏🙏🙏🙏

Many hands make job light 👍👍

Я только не понял зачем они шайбы по торцам приварили

@midik123

2 жыл бұрын

Думается, чтобы на торце углы не сжечь.