Truck Chassis is Bend Due To Falling Down Mountain Amazing Chassis Repairing And Restoration
Автокөліктер мен көлік құралдары
Truck Chassis is Bend Due To Falling Down Mountain Amazing Chassis Repairing And Restoration
Restoration
Truck Accident Cabin Chassis Repairing And Restoration
Faw280 Truck Accident Cabin Chassis Repairing And Restoration
Hino Truck Repairing Chassis
Accident cabin chassis repairing
China truck accident cabin chassis repairing
Truck accident cabin chassis repairing
Classic restoration
Amazing restoration
Pakistani truck chassis repairing
Pakistani truck chassis restoration
Accident truck chassis restoration
Amazing things restoration
#amazingrestoration #truckChassis #Amazingthingsrestoration
Пікірлер: 262
To some of the commenters on here these guys don't have accessibility or the funds to do things the way we do here, they have to make do with what they have, it is amazing watching these guys work.
@muhammadali77
8 ай бұрын
Absolutely
@stephenpaul9165
7 ай бұрын
And they do it well and make it look easy!
@martingabrielrodriguezdosa8010
5 ай бұрын
😊@@muhammadali77
@ApolloFreya
5 ай бұрын
Well said. I love watching these types of videos it’s amazing how they all work together and get the job done 👍
@trainnerd3029
5 ай бұрын
The work ethic of these people commands Respect!
Yes the Fabrication looks all very nice and straight wait untill it is put under extreme working conditions then see how great it is. Welding this way only weakens the chassis rails and that is why you never change the heat they are fitted with. Sorry guys my opinion after 40 years in the truck Chassis industry. Aussie Bob.
@PeterShaw-lb9lt
8 ай бұрын
Aussie Bob you would know also are the rear wheels aligned with the front even though they straightened the chassis rails especially the way they overload there trucks
@mousemade1
8 ай бұрын
At the very least they should have cut the ends of those patches at an angle to prevent stress concentration. That should give them an extra week of service life after they load the truck to three times its rated capacity lol.
@FierroDuroRails
Ай бұрын
The comments are hilarious... you guys are making comments like these guys have access to modern day state of the art equipment. ... watch the video and enjoy they get by with what they have... which is impressive they will survive a post-apocalyptic world and still live in peace while people in the modern day world kill and eat each other.
I love the Bedford MK recovery truck! Great to see good old British engineering still holding up after 60-odd years in service.
@shirleymental4189
4 ай бұрын
Bedford TK
I thought most viewers would understand trucks are precious to every nation,and they do what has to be done to keep them on the road,regardless of technology People will learn and adapt to their situations.
This is a common repair in Pakistan. Nice work, back from the dead.
Imagine what these guys could achieve if they had a fully fitted out modern workshop ... 3:11 notice the top of their new space rocket in the background 😎😎😎
Mission accomplished guys 👍🔥👍🔥👌👌👌👌
That Bedford wrecker is an amazing piece. Super nice unit. !!!!!!!!
@jakleo337
9 ай бұрын
Yeah, I liked it right away. And not fitted out with all the usual faggy, tacky bling you see on these channels. Must be an expat brit.
I see that health & safety are always paramount in the minds of these men, Lol.
Yo as a Frame Technician I have the upmost respect for how these guys have to get the job done. 💪🏾💪🏾 to have to tear the entire truck down to straighten the frame is crazy!!!!
YOU FABRICATORS ARE JUST AMAZING!!!.NOTHING IS THROWN AWAY..FIX AND REPAIR IT...GREAT TEAM WORK...🎉❤
@muhammadali77
9 ай бұрын
Wow, thank you!
@arnelbullo9232
9 ай бұрын
@@muhammadali77 golden hearth to their works.
@2wwwilly
9 ай бұрын
Wish you recoated it before assembled back ,looked more professional services ..
nice job thank you i love to watch perfect ,❤
не смотря на игнорирование всех норм ,правил, а иногда и физических законов,эти люди достойны уважения!!!! Это великие труженики !!! Удачи им!!!
@muhammadali77
7 ай бұрын
Thank you 😊
@muhammadali77
7 ай бұрын
Thank you 😊
@pitrud2963
5 ай бұрын
Да, труженики, но в то время когда мир живет в 21 веке они живут в 19 работая за копейки и выглядя как бомжи.
@alexsheeck9829
5 ай бұрын
У нас бы ни одна деталь что ониотремонтируют не прошла бы техконтроль. Рама варена - всё. Нельзя использовать.
these are indeed amazing. Boss man got serious engineering skills.
Hammers and hydraulics, welders and wrenches, punches and pry bars. We've got the technology to get the jobs done. Add a tarp for sun protection. Perfect!
Up and ready for another sidehilling adventure!
Amazing skills.
En amérique du Nord, on aurait foutu ce reste de camion à la feraille. Mais voilà, eux, ils le récupèrent le tout et le remettent sur la route ! Bravo !
These guys are so skillful. Such a great team work. Great that they repair and recycle rather than throw away and get a new one. We should adapt that philosophy here in the West.
@yprepair5853
9 ай бұрын
Hu
@thepubliceye
8 ай бұрын
I don't know what West you are talking but in the US that repair would be unsafe so the rail would be recycled, not thrown away. Repairing is not the same as recycling, repairing that frame would put everyone at risk.
@kenc3288
8 ай бұрын
Not only the safety issue of such a repair, but the labour costs for this job would be prohibitive.
@thepubliceye
8 ай бұрын
They bout the hole as scrap and will be sold as new or remanufactured so labor cost is not an issue. Of all the bad things we forget they hardly have any unemployment.
@alexmarcia9007
8 ай бұрын
What is different is that here in the west labor gets charged hourly while over their they pay them salary
These guys are true artists. If that truck was in the U.S.A., it would be at the crusher right now.
@muhammadali77
9 ай бұрын
🤔
@sanddabz5635
9 ай бұрын
Yeah it would!
@BrucePierson
8 ай бұрын
Same here in Australia. The total vehicles here for not much more than a dent.
@500mos
8 ай бұрын
In the U.S. we have become a throw away society.
@thepubliceye
8 ай бұрын
Right where it should be for the safety of the public. The steel will be used again, it will not go to waste.
Хвала мастерам, делают из запчастей и поломок, шедевр, спасибо за видеоролик, спасибо, хвала вам за труды, спасибо.
WAAAAW GOOD....
Bedford TK! I drove my brothers TK about 50 years ago.!
What these men accomplish with just what they have is nothing short of IMPRESSIVE! I hope they make decent money for what they do. God bless all of you. 😊
These people have skills. I'd like to see any video of the skilled driver who brought it to this mess.
@crib53
8 ай бұрын
before seeing the skilled driver, you must see what kind of road they operate on....
@richardjoseph9002
7 ай бұрын
Or those that were responsible for the state of the road in the first place!
Hmmmm Wow Thing .. by Wow Mechanics1
Best tool ever was holding the nail 4:46.I saw video of others holding them with there hand while someone with a massive hammer hits it..
I like to watch these rebuilds because the workers do so much with so little!!!!
Nice viideo truck
@muhammadali77
7 ай бұрын
Glad you liked it!
Heatin' and a beatin' truck repair service. A lot of these guys' talent revolves around a large hammer, especially when it comes to "driving" in the bolts, I'm sure the threads are only a little bit mashed. New fenders made of new not reclaimed steel! they spared no expense on this project!
@amyhund3786
8 ай бұрын
Das sind Präzisionshammer. Genau wie die Kreide und Maßbänder um auch im Mikrometerbereich präzise arbeiten zu können
@norbertschmitz3358
8 ай бұрын
@@amyhund3786 Genau, und genau so praezise wird Deutschland ein armutsland werden! Und wer lacht dann arrogant rum????
That Bedford tow truck is awesome!
Its all that helium - it makes them strong 💪
When 'good enough' is good enough!
Nothing but respect for these men.
Great men making do with what they have
Impressive teamwork with quite basic tools, really hard working guys.
@muhammadali77
9 ай бұрын
❤️❤️
These guys give the impression that they did this before once! Interesting stuff.
These guys are amazing!
Great work 👍
@muhammadali77
9 ай бұрын
Thanks ✌️
I like to watch activities
Wow😮 from Indonesia❤
super mistr
OSHA approved flip-flops.
Where would we be without the humble sledge hammer
Nice work, my friend👍👍
@muhammadali77
7 ай бұрын
Thank you 👍
I love this videos,I have fun listening the conversations 😂 hello from California US you guys are amazing!!
@muhammadali77
7 ай бұрын
Glad you like them!
A fork lift would make their work so much quicker and easier.
amazing team work !!! straightening frame in cold condition worrisome, there may be cracks inside the metal.
@JelMain
8 ай бұрын
Added to all kinds of internal stretching, tensions, you name it. And then they come here.
@glennschemitsch8341
6 ай бұрын
no problem to repair next time.
Admiro su trabajo saludos desde Argentina se ganaron un subscriptor
@muhammadali77
9 ай бұрын
Thank you 😊
If you don’t know it is impossible, you just go ahead and do it anyway. Where can I get pair of those Elfan Safety sandals ?
Man these guys work in some countries we would have junked that truck. What country are these guys in? Thanks
Well that was enlightening, the sides of the chassis were still twisted, no proper weld preparation, not even a sniff of a torque wrench, finished chassis not checked for squareness, parallelism. The truck went down the mountainside without the use of a road, and had been repaired before. All in all the truck's future looks very dim, especially with the poor welding. So much more but it becomes boring, however you never see the repaired items being driven in a straight line down the road, that's worrying.
#$16,000 just in two weeks Mrs Amada Bernardin you are so amazing.
@subhashkumar9689
9 ай бұрын
Same here, I started with $1,000 now earning $6,300 bi-weekly profits with her trading program
@mandosalvegay4455
9 ай бұрын
I have heard a lot about Investments with Mrs Amada Bernardin , how good she is and how she has helped people. Please how safe are the profits ?
@AnaGloriaDehernandez
9 ай бұрын
I have also been trading with her, The profits are secured and over a 80% return on investment directly sent to your wallet. I made up to $70,5600 in 2months trading with her
@tiozinhodomiojo499
9 ай бұрын
I have really heard a lot about her, how can I contact Mrs Amada Bernardin please🙏
@cr4zy.cl4n87
9 ай бұрын
The discovery of Mrs. Amada's frequent communication with Telegram users⏬
10 out of 10 for effort, they sure not scared of hard graft.
dude in the orange hat loves his hammer... like an Arabian version of Thor
Ребята, а вы для Дакара грузовик собрать сможете? 🤔
Not making light of anyone's misfortune but that Title is priceless....Truck Chassis is Bent Due To Falling Down Mountain---that would bend it for sure.
@muhammadali77
9 ай бұрын
Brother This Truck Really fell Down the Mountain 🏔️
na força e da tudo certo
Great job 👍🏻👍🏻👍🏻 very hard work
@muhammadali77
8 ай бұрын
Thanks a lot
Great work men.
@muhammadali77
9 ай бұрын
Thanks for listening
Falling down a mountain, yea, that usually bends them.
Outstanding teamwork!!
@muhammadali77
9 ай бұрын
Thank you!
Such wonderful work force to repair these trucks that takes so much hard work. Great videos say thank you to all of the workers.
@muhammadali77
9 ай бұрын
Thanks 👍
Great work. This frame will never break unless with heavy overload.
@JelMain
8 ай бұрын
Which will soon happen.
If in doubt, add another leaf spring !
I clicked on this specifically to read what the experts has to say about it. Not disappointed😁
🙄🙄🙄🙄🙄🙄incredible!
Remember, lift with your legs, not your back.
I admire their totally invisible PPE gear.These steel capped toe-slippers must be so comfortable to work in.
Speaking as a retired mechanical engineer i would have prefered to replace the main chassis rails with new rather than weld up the cracks and straighten it on a hydraulic press. Most of the rest of it is just cross stays and short stiffening pieces that can better resist the twisting forces and so are likely to be ok. Other than that I'd say Hat's off to these guys for doing a great job. Incidentally using a big hammer like these guys do requires skill and practice. Thanks for the video, it's excellent.
@glennschemitsch8341
6 ай бұрын
They only replace with bent or broken parts.
Everybody can say what they want, but the fact is they work with what they have and they get it done. We take it for granted in the U.S. with all the information and tools we have.
I love watching these type of videos , in the west we live in a throw away society , I much prefer to repair and reuse which when I was growing up was standard practice , now you can't buy a nut & bolt you have to buy the whole damn thing .
Frankly, Drivers are likely far more plentiful than working Trucks in places like India, Pakistan or Bangladesh. Despite what seems like an incredibly labor-intensive process....the math easily works for the trucking companies
Chalo kam😊
The dude at the end in the white must be Quality control because he has the only measuring tape ???
HALFASS JOB**EACH PIECE SHOULD BE CLEANED AND PAINTED BEFORE REASSEMBLE.. DR KEL
Did the driver declare his off road preference to his insurance company?
Amazing metal working skills which would be almost useless in modern western industry.
😮👍🙏😊
It only takes 25 guys to make a pot of coffee
Stone age country😂
This is still a bodge but less so than many of these videos. Pressing the chassis is the way to take out the bend but welding it should not happen. The chassis may be ok for doing light work. That means 50% of manufacturers specifications. But this is Pakistan where double manufacturers is the go!!
@sheikhkhalid5969
9 ай бұрын
Who said that? Liberty Auto Body & Diesel Works of Detroit?? I thought they took sabbatical to Beijing Auto Retraining camp.
@richardcline1337
9 ай бұрын
You obviously don't understand that in their country they work everything to the point of destruction then repair it and start all over again. Very little gets wasted, whereas in many other countries, especially the US, if the paint gets a scratch on it, the vehicle goes to the scrappers.
an old bedford cf still going wowser
jag är full av beundran vad dom kan göra med enkla medel helt otroligt😄😄😄😄
Here in the west it would have been scraped…. Great work !
@muhammadali77
8 ай бұрын
Thanks 👍
Looks like it's filmed in the suburbs of Marseille, France.
Following the repair the new owner still can’t figure out why the vehicle pulls to the right when turning left and left when turning right.
Recovery truck is one pcs .. 🤩🤩🤩
@muhammadali77
8 ай бұрын
🤩
Forget those giant leaf spring packs , just weld those saw horses in there
Whatever the amount is that these guys get paid isn't enough.
Wow some of them are actually wearing shoes .
Over here in the United States, the truck would have been certified as total. The old rails would not have been straighten, new rails, and labor would cost more than the truck is worth. I don't want to take away anything from these mechanics. They are brilliant and talented, hard working people. In there country, there are no laws against, this type of repair. In the US you have to submit the repair to several agencies, after that several inspections, thats we don't do it here. How do I know this my truck was hit and had a bent frame, a 2016 model totaled.🤑🤑
cool
THIS IIS THE GREEN WAY REPAIR AND REUSE
No wonder it bent- look at all the holes in the main frame!
Why do we never get to see the finished job? Be nice to see the truck put back together and drive away.
@sanddabz5635
9 ай бұрын
Agreed!!
@alanwann9318
8 ай бұрын
Because it never makes it that far!
It will buff out.
Geez, how many toes have been crush severed or generally mangled in these sandal wearing places? 🤦🏻
good!
@muhammadali77
9 ай бұрын
Thanks!
來香港收購2手貨車,15年車要報廢!😮😅😊
@muhammadali77
7 ай бұрын
You send us the visa and we come to Hong Kong.