Those guys have way to much faith in those bottle jacks in the dirt.

@jzila9900

9 ай бұрын

Are you going to subsidize a Bendpak lift?

@ovalwingnut

8 ай бұрын

You know it TRC. I'd have those tire and rims stacked up underneath in case of (god forbid) a earthquake shows up.

@johnhooper3009

4 ай бұрын

Good stuff gentlemen

Pakastani truck rule number one: if it aint overloaded it wont make money.

You guys are amazing mechanics . Tell the driver not to let them overload him like that . One rock was to much , 2 rocks was major overload . Just because it will fit doesn't mean it will carry it . Thank you guys for doing an amazing job.

@dont-want-no-wrench

10 ай бұрын

they overload the hell out of their trucks. they get the truck in, rebuild the frame and suspension way heavier, and then still break them.

@cherilynnkeenright6699

9 ай бұрын

Twice as much pay. 10ton weight limit.. 90ton = more money 😂

Should last another 30 miles or so, great job...the dirt and sand will help break in the old bearings too.

@BobSmith-mc7uq

10 ай бұрын

Much like valve grinding compound!

@Ozsmallbore

8 ай бұрын

The sand and dust was actually raining down onto the parts from underneath the tray while they were assembling😂.

@raufjaleel8317

8 ай бұрын

The owner of that truck is not stupid to get it repaired spending handsome amount for just thirty miles.

Damn! Those were some big rocks.

all parts are put to the ultimate breaking point.

SAnd and oil go together so well during the rebuild

The pinon and ring gear were fried, I don’t care what XP oil you use, with those loads something is going to break.

Смотрю Вас из России🇷🇺🇷🇺🇷🇺, Вы отличные мастера!!! 👍👍👍👍👍

@yotub_A_Vorobiov

7 ай бұрын

@@rv7708 Не могут, правда. У нас в стране гайковёрты используют. ПЫСЫ; Сало уронили, беда!

Looking at the rocks and the spring packs..."gee, i wonder why that pinion blew to bits??".

Strongest and most reliable bottle jacks on the planet!

Hitting a wrench with a hammer…. Pakistani impact gun??? Seriously, I can’t believe these guys actually work in these conditions with basic hand tools and get anything done. They are truly dedicated to their profession.

@NaturalTasanova

10 ай бұрын

And people still hate…

@scottberry5266

10 ай бұрын

@@NaturalTasanova : who’s hating??? I admire what they do with what they have. I have 100 times the tools and a decent shop to work in and and get less done.

@NaturalTasanova

10 ай бұрын

@@scottberry5266 ofc I agree but I love watching these vids for some reason and I always see in the comments ppl saying “it won’t last” “where’s the torque wrench???” “These guys break things” etc

Who needs a torque wrench.

Do the drivers of these trucks understand the meaning of overloading a truck? You guys are fine workers and your trucks are tough so when I see this so regularly I know that somebody is overloading their truck and not just one time or two times but everyday all-day full-time. Either way it's nice to see you fellows working, I envy you you and your energy I also Envy your knees because my knees are utterly shot! I had to have one replaced and I'm waiting on getting the other one replaced. It will not support me anymore. Best regards, Bob from Virginia USA

@user-dt6yw1sr9b

10 ай бұрын

Greetings from Russia, Bob. I work on an American Peterbilt 387 truck. To you, Bob health and long years.

@robertordewald8678

10 ай бұрын

@@user-dt6yw1sr9b I return your greetings. I hope I find you and your family in good health. If You are interested, I live in town called Staunton. It is in the state named Virginia. It it the eastern part of the US midway between Florida and Maine.

@user-dt6yw1sr9b

10 ай бұрын

@@robertordewald8678, Damn KZread deletes my posts. Does not allow us to communicate with you🤨

@robertordewald8678

10 ай бұрын

@@user-dt6yw1sr9b actually I goofed my message. I'll fix it later today if I remember either way thanks for the message I really enjoyed hearing from people! Best regards, Bob

@dandanb9667

9 ай бұрын

But if the drive refused the overload, another driver would do it that's the problem

Everyone's commenting on the huge loads breaking the gears - but it keeps these mechanics employed.

Looks like government employees in the US, 6 men standing around, 3 doing the actual work. OSHA APPROVED

This Guys are Artists .In my Garage we can make the same repair,but not better Amazing

maybe it makes noise because its way over the load limit....

@cwmbc

11 ай бұрын

Looking at those lumps of stone. Id say one would put those standard axles at max weight.

@innoticbeats2211

11 ай бұрын

There's no such thing there 😅

@monteceitomoocher

10 ай бұрын

That's why everything is totally mullered by the time it hits the repair shop!.

@JACK-nt8jz

10 ай бұрын

Load limits ? If fits they load it .

@charliemango8972

9 ай бұрын

Nahhhhh

torque settings: 1- one guy holds, other uses short ratchet 2- hit end of wrench with hammer 3-150lb dude hangs off end of 3 ft bar (guessing around 300ft/lb for those ring gear bolts)

Ремонт и техника безопасности поражает! Еще говорят в России плохо чинят😂

@Drozdafil

10 ай бұрын

тут реальный "на кортах кастом"

@avega808

10 ай бұрын

Раз они о ней не слышали значит её нет!😂😂😂

@user-ev9sb8zw7i

2 ай бұрын

их много,как китайцев....

Remember to torque bolts to manufacturers specifications.

Respect!! Please continue to be safe!! 💪🏽

New parts it seems, but big heavy rocks will still strain that rear end.

Hey phone guy, thanks for helping out 🙄.

Once again another good job in the conditions they are in .

It will be back soon overloaded again

Good job, but why you do not show to us what parts have been replaced? Bravo pakistani trucks.

I think I would be investing in some rattle guns. They never cease to amaze me.

The younger fellow on the pipe is very good employee. Good work. Stay safe. The USA has eliminated these jobs at home. Thank you.

If it fits it ships... Apparently max gross is more of a suggestion in Pakistan

Very interesting to watch

Thanks for another video at true speed.

@pakistanitruck

11 ай бұрын

Our pleasure!

Que bien . Saludos desde Barranquilla Colombia

This sort of thing happens when trucks are overloaded way past their rated capacity.

Preventive maintenace...Who knew they could work anywhere except in the middle of a busy road??

*O V E R L O A D E D*

You always amaze me with you skills.

Try to get no sand in The Barrens and make sure we put it back together everything is torque properly

The last 25 seconds of the video is enough to explain all the other videos that "repair" broken hydraulic cylinder rods, damaged excavator buckets, bent booms, bent chassis, broken axles, broken crankshaft, broken gears, snapped suspensions, overheated engine rebuilds.

How's the guy on the phone while his two mates struggle with the diff!

👏👏👏👏 saludos desde arguentina🇦🇷🇦🇷🇦🇷🇦🇷

Meseriașii aceștia au si o doză mare de curaj, pe lângă faptul că știu ce au de făcut...

Or fi rulmenți radial axiali cu role dar strînși atît de tare se vor gripa. Camionu a fost proiectat pentru două punți motoare și după intervenție a rămas la fel ca înainte cu o singură punte motoare.

パキスタンの方達の技術にただただ驚くばかりです😮

I cant get how only two stones could break that almost new truck 😉

I worked at a used car lot when I was a kid washing cars. I saw things that made me wonder like my boss putting sawdust in a rear, adding water to a gas tank to make it look like there was gas in it. Sand in the engine so they could get the $ putting a new engine in it. Pepper and eggs in the radiator. He made good money, and he would repossess a car if they were 1 day late.

Good brow 👍

"That ain't your daddy's R&P"... Very cleaver use of the axle as a stand-in ring & pinion holder. I thought at first they were converting that truck into a Wide Track Pontiac™. I doubt that R&P needs to be to "dialed in" since it probably only rotates about once a mile? Very impressive however :O) That "spring stack" is huge. I haven't seen a stack that big since iHop's "all you can eat" special (some US humor: - OK, I'll show myself out now) Cheers and thumbs up from the U.S. (yep, us). p.s. I'm glad they were able to get their rocks off before jacking that puppy up. Just saying.

Молодцы 😊.

These guys are good, but only 2 jacks holding that truck up and nothing else. I wouldn't get under that truck.

Indonesia......👍👍👍👍👍👍👍👍

Very hard workers!

And dispose of a waste in a environmentally responsible manner which in Pakistan means pour it on the ground to suppress dust.

The entire weight of the rear end is held by two bottle jacks, there’s no way I would ever take that risk. It’s not that they don’t have large steel stands, seen them used many times.😳👎🇦🇺

@johnmarlow2887

6 ай бұрын

Especially that one of them is at 10 - 15 ° angle. I love, too, their protective footwear.

@billyking8695

5 ай бұрын

They belive theres 100 virgins waiting for them in the afterlife so i doubt they care if if falls on them or not 😊😊😊

In this part of the world parts are worth far more than labor. I wonder how carefully they adjusted the new gear mesh ? Of course if they are going to haul several times the capacity of the truck , then fine adjustments are probably not important.

These guys are amazing, such skill in there old school repairs

The original hammer socket/wrench!

Break the flange off that one like the ujoint flange

Wonderful job, wonderful team... I'm impressionned, really. RESPECT !👍👍👍👍👍

Broke camel's back ..but repair shops fluorish ..😂😂❤❤ wheel goes round oops world goes round lol😂😂😂

Parabéns pelo trabalho 👏👏

Great job in tough conditions

Keep up the hard work guys. You have my admiration

Torque it til it smokes, then back it off a half.

No torque wrench needed. Tighten up just before the bolt snaps.

good job

You guys need some Harbor Freight tools. With $100 worth of tools you could probably save 500 man hours a year.

@TheSostenesg7

10 ай бұрын

$100 is a lot o money in some countries.

@buddymac3993

10 ай бұрын

A job for everyone and everyone has a job and EATS

Привет мастерам классным 👍

Я бы не стал это делать в шлепках 😂

Not a single one gives a smile ?!?!?!?

@BlackOutDrunk69

6 ай бұрын

would you smile if you had to break yourself to get a nut off, 40 mins work which could be 2 minutes with a cheap impact driver

Nobody in Sweden ar able to work in that way. dhey ar fantastic!

Super Arbeit 👍👍👍

Proof anything can be done with basic hand tools . And yet I’m here stuck on taking my torque converter bolts off my 4L60e on my 99 Silverado because they have 8mm Allen key bolts on and no space for any tools . And it’s only 3 damn bolts . I tried welding the 8mm bold onto it and nothing

Заберите у неука молоток и дайте кусок трубы!) Кровь из глаз когда он им по ключу бьет...

@Motorider98

10 ай бұрын

Ага весёлая нация)

❤SALUT PRIETENI FELICITARI FRUMOS ȘI NUMAI BINE 😊

Brasil........✌

'War is a racket, you bet!'

Lol and we got guys in American shops crying about oil changes

Grande profissional mecânico muito bom excelente profissional parabéns pelo vídeo 👏👏👏

The reverse bolting of the half shaft onto the wheel hub to assist the repair was a touch of genius.

@raufjaleel8317

8 ай бұрын

Started at 13:20 .

Gentlemen PLEASE DON'T TRUST THEM JACKS use some wood blocks to hold up the truck.

The content is good and interesting to watch, but there are too many commercials. I don't recall this many commercials when I first started watching a few years ago. So, I'm going to look for alternative channels without so many commercial interruptions.

Sooo good🔥🔥🔥

aside, what do they use those enormous rocks for?

@raufjaleel8317

8 ай бұрын

Marble rocks.

Excellent ❤

Nice vodeo

Torque to pipe tight, it's in service data.

I like the way the trucks are painted in rainbow colors and that the employees are allowed to wear dresses on the job. 🌈

Интересно они знают что такое гайковёрт..!?😊😂😂🤦

первый раз вижу как полуось используют вместо тисков и первый раз вижу как пятно контакта определяют при помощи сине зелёного солидола. полный колхоз.

4x6 truck ?

기술 좋네요

❤❤❤❤❤❤❤

How much is a job like this with parts and labor?

@johnnyross3340

9 ай бұрын

Parts are too expensive ..that's why the repair and make do..

The oil is so black looks like the use old engine oil for the diff

Rear end noises ? Human or Truck? What you eat and how to fix???🇨🇦😄😄

At 14 minutes, he's on his phone. Totally unsafe work practice to use a phone while on the shop floor!

Imagine what they could do with aircgun a rachettes an modern tools

They don't have an inpact wrench

👍🏽👍🏽👍🏽

@pakistanitruck

10 ай бұрын

Thanks for watching