I love the videos, but this one does not make sense to me. I would just spray light with soapy water and agitate with brush, then clean water and either use compressed air or air dry. I do not see the need to do all that. Still a great video to watch!

Could you not have just bought a few detail brushes? It would only take an extra 10 seconds while you're cleaning the bike

I also have a Scrambler 1200 with the Triumph accessory headlamp grill fitted. Fantastic bikes, at six foot three inch and eighteen stone I can ride a modern classic without looking like a bear riding a tricycle 🤣. Cleaning isn't an issue, spray the headlamp with Muc Off or Silkolene Wash Off, let it soak for a short while then use an Oxford Big Softie Wash Brush with some warm water and a good car shampoo through the grill. Easy Peasy!!!

@Moonfleet41

Жыл бұрын

"bear riding a tricycle" Quote of the day Dave.! 🤣 Sounds like a bike made perfectly for your frame.. at just 6ft and a fsir bit lighter than you i still found it a touch too high.. not many bikes do that !

To be honest I’d just use a soft detailing brush through the mesh to clean the headlights 🤷‍♂️

I’ve just fitted the Triumph accessory headlight guard to the Scrambler 900. This is fastened by two screws into a replacement bezel. This is easily removed for cleaning. Why they can’t do the same for the 1200 puzzles me. Great video as always 👍

@Moonfleet41

Жыл бұрын

Me too mate.. doesn't make sense aye !

They definitely didn't have their thinking caps on with that piece, eh? This would have been a good place to integrate the Sportster's brass bits with a thin bit of braze on the backing plate to fill in the cutoff wheel's thickness, although that would have been much work to dress the brass down square to fill the kerf from the wheel for very little return. If you had a similar shaped stainless bit you could have made a bracket sandwich, maybe even engrave 1200 or Triumph on the outside piece of the sandwich. Even if this is the final product, it's far more useful than the way Triumph sent it out the door. Take care, you two :)

I think Triumph was thinking the average person would just spray some good cleaning chemicals on the light and hose the dirt off as I have for years on my off road truck

@Moonfleet41

Жыл бұрын

Quite right, but imagine the trolling if one was to advocate spraying chemicals on a plastic headlight... and there is the weak link, if this was a glass light I would, like you, clean it that way, but as it's a soft plastic lens, easily susceptible to scratching and bloom, I think that gentle cleaning will hopefully make it last a little longer, specially with the price of replacements on these units.

Funny, the OE headlight cover accessory for the other liquid cooled Bonnevilles is removable with two screws attached to the headlight bezel. So Triumph clearly thought of this but promptly forgot when designing the accessory for the Scrambler.

@Moonfleet41

Жыл бұрын

I think you're right Louis !

A fine example of shop fabrication! I do like the "industrial" fastener look as well. Great job!

Why didn't they have a clip on one side and a hinge on the other ? For the amount Triumph charge for genuine accessories you would think they could do better.

It would be funny if Triumph comes out with a new version of their headlight grill. If they are not watching your videos then they should be. Another case of a craftsman adding what engineers have forgotten. Good job Del. Penny should be an optometrist. Somehow I can see things more clearly in your videos than I can in real life. 😁🤓 Thanks and blessings to you both. ❤👍👍

@Moonfleet41

Жыл бұрын

Thank you so much Rick, that's very kind of you... I believe on one of the other models they do make the grill able to screw on independently to the light bezel without disturbing the headlight, so on this model I'm not sure why it was so badly thought out... but like you said, a simple fix! Have a great week there, be safe and well, D&Px

Del, Vise Grips 10R. Bought mine in 1976. Had to change a starter solenoid in -8 C weather. Bracket kept twisting in removing the heavy gauge starter cables. Clamped the bracket with the Vise Grip 10R and removed the nuts with a 3/8 drive socket. My girlfriend said wow you're smart. I said no, if I owned the vise grips at the start it would have been a 5 minute job not a 1 hour shopping trip. HaHa. Nice outcome on the rock shield. Take Care, Ride Safe.

@Moonfleet41

Жыл бұрын

Where would we be without Vice grips aye.. Thanks for sharing ! Ride safe too mate .

Not all designs of triumph parts are by triumph engineers, outsourcing today takes many forms, if companies could outsource your loo time so you don't have to go to the loo they would figure out how to do it.

@Moonfleet41

Жыл бұрын

Ha ha.. True !

Because with soap 🧼and a clean paper you could clean it 😂 But good job Sir

Sometimes, strangely, these big companies need the little guy to do their thinking for them. Nice job Del.

@Moonfleet41

Жыл бұрын

Yeah, you're right, in fact i think, when you look at many accessories in dealer catalogues today... then thumb through a few back copies of BSH from a few years ago... things start to look suddenly familiar... lol.. if you get my meaning.!

Much simpler to just cut the guard's eyelet to an open-ended spanner shape, no?

@Moonfleet41

Жыл бұрын

But then you'll Still have to back off the headlight mounting bolts quite a bit and upset the headlight aim as it will inevitably move !

A nice little touch and totally agree on the cleaning part, looks great

@Moonfleet41

Жыл бұрын

Thanks buddy!

Clever yet simple. Love it. Good solution.

@Moonfleet41

Жыл бұрын

Thanks! 👍

Just read a comment on another vid where there was welding and this guy demanded that the welding flash be 'filtered' so as not to blind the viewers. Seemed serious (no emojis) I'm probably being trolled but... 🤣

@Moonfleet41

Жыл бұрын

Oh dear... I think you rather are mate!

Great job...very satisfying to watch!! Good solution too. Cheers, Steve

@Moonfleet41

Жыл бұрын

Thanks mate👍

Well, bang goes my idea of using one of those things as a cricket-box, you've gone & made it all scratchy! (Does rather escape me as to why my trousers would need 'see-through' armour down there, but still : )xx

Nicely done, simple & effective 👍🏻 have a great week both of you.

@Moonfleet41

Жыл бұрын

Thanks buddy.. You too.👍

Simple and elegant solution. There certainly is pleasure in being able to look at even a mundane item, and tweak it so that it makes your day to day living with it, easier! Nice 🙂

@Moonfleet41

Жыл бұрын

Exactly that mate, thanks for your kind words!

In my head was a piano hinge and a bonnet latch off a Willis jeep! But I've just run out of pianos and Jeeps and your solution is much nicer! Peas n loaf buddy ✌️🧡🤗

@Moonfleet41

Жыл бұрын

Now that would be a heavy duty solution.. i can see that you worked in a Power Station Sir...lol! ️🧡🤗

@springy-2112

Жыл бұрын

@Delboy's Garage Haha, yes I'm back at the power station . Shares in Duct tape are at an all time high! 🤗🧡🧡👍

Excellent idea, perfectly executed. Better than factory, how satisfying. Thanks for showing, Günter/Nürnberg

Nice on Del. I have had this set up on my scrambler to, for some time now. Wow, what a great idea, but I also decided on using a HID set-up instead of the standard halogen bulb. Plug it all in, and no worries for 50k hours. As always, Del great ingenuity x

@Moonfleet41

Жыл бұрын

Thanks Marc, I remember HID kits... fitted one on my first Gen 1 Hayabusa, made the headlight pattern look like an angel you were chasing along the road... maybe my Guardian Angel?! Have a great week mate, D&Px

@Butterfly07949

Жыл бұрын

Delboy's Garage ha ha definitely is Del a twelve foot angel to be precise🤗

You do good work Del, nice, clean, mod. An alternative would be to slot the original mounting hole on on the screen bracket to form a hook. That way you could just slightly loosen the headlight mount screws and slide the screen up and off.

@Moonfleet41

Жыл бұрын

Good thinking mate, trouble is even if you crack the headlight mounting bolts off, a 1/8th of a turn to do what you suggest, the headlight aim will drop out of alignment, which is maybe no big shakes, but having to realign it in daylight is gonna get a ballache in the end!

Like it

Job well done Del!!

Hope you copyright that mod mate. Very nicely done sir. Triumph should be knocking at your door anytime soon!! Lol.

Great video brother !! Outstanding job ! what a clever way to solve that issue. Btw those camera angles and close ups are sick ! good editing brother makes it detailed. Bike is looking awesome brother !! Keep up the great work !!! Stay safe guys cheers from New york !!!!!! 🍺🍺🍺🍺🍺

@Moonfleet41

Жыл бұрын

Thanks so much for your kind words of support, 👍 We're glad you enjoyed the video, simple solution and now i can whip it off in a few seconds for cleaning. Have a great week both of you and keep safe brother.. D&Px

A J W D my friend Oh by the way in our household my wife tells me " Another job well done" that's exactly what you do in every video love you Bro ride safe.

@Moonfleet41

Жыл бұрын

Thank you Jose.

Great video, Penny and Del. A simple solution for a puzzling design choice, nicely executed! Take care, be well and ride safe!

@Moonfleet41

Жыл бұрын

Thanks, you too mate! As always, we really appreciate your support !

It's a shame that there wasn't a way to have a thinner kerf where the brackets were cut. All the same, a creative solution. Well done!

Yes very practical addition nice job

@Moonfleet41

Жыл бұрын

Thanks Gerard !

If Triumph had thought of it, Del, they would be charging another £30.00 for it!! Count your blessings!!!🤣

@Moonfleet41

Жыл бұрын

Ha, you're not wrong there mate !

Man of your word from your replay to my comment from last video nice solution to the problem.....cheers

@Moonfleet41

Жыл бұрын

No problem 👍

Nicely done! Hopefully the next iteration of the cover will show they have taken this on board and it is modified to allow for easy removal!

@Moonfleet41

Жыл бұрын

That would be cool, but somehow if it is, it'd be their idea and patented..lol! Good to hear from you as always buddy.. thanks for your loyal support. D&Px

Really nice work mate. Its the small details that make a huge difference :-) great looking bike

@Moonfleet41

Жыл бұрын

Thanks mate👍

Gets the job done. I think the engineers might have been having a moment that day. Shame that someone has to spend the $$$ only to have to do something like that to it but, it is what it is.

@Moonfleet41

Жыл бұрын

Exactly.. but as with many accessories, we're lucky they even fit properly in the first place.. at least this was just an upgrade for convenience !

Wasn't it a Triumph that you had to remove the carburetor to change the air filter? Daft doesn't begin to describe it!

@Moonfleet41

Жыл бұрын

Hi Harold. Yeah, on the legend (and the rest of the Thunderbird series), the two piece air box needs to be totally removed, and for that you need to slide the carbs out first... great for dealer labour profits i guess..lol!

Brilliant

good thinking del good work

Took 5 mins into the video to say Yeah I Got it Now, Good Clean Job

don't clean it

@Moonfleet41

Жыл бұрын

Only the headlight so I can see where I'm going lol

Another great fabrication dell,you could patent those brackets, regards Mike Derbyshire,

Trademark it!

Excellent mod Del - I agree essential for this accessory 👍

@Moonfleet41

Жыл бұрын

Thanks Richard, I think so too!

Good reminder on the thread lock

Much better Del! Great job.

@Moonfleet41

Жыл бұрын

Thanks buddy👍

Clever upgrade, job well done young man-- hi to PP 👍x

@Moonfleet41

Жыл бұрын

Thanks buddy👍

Clearly they need the Delboy touch 🤣🤣

@Moonfleet41

Жыл бұрын

Thanks mate, that's very kind!

Good job Del.

@Moonfleet41

Жыл бұрын

Thanks 👍

Nice work! Excuse my ignorance, what does the heating of the metal and dropping it in oil do? Rust protection?

@Moonfleet41

Жыл бұрын

Yes it does mate !

@happygilmorides7353

Жыл бұрын

@@Moonfleet41 cheers mate. Ride safe

Ingenuity is the splice of life. 🤔😉

Evening Del M8

@Moonfleet41

Жыл бұрын

Hi mate, great to hear from you!

QUICK! Patent Pending design!

@Moonfleet41

Жыл бұрын

Good call, I think I'd expect bombs from Triumph though!

Neat! I like that a lot! 👍

@Moonfleet41

Жыл бұрын

Thank you Keith, good to hear from you Sir, let's chat soon!

Simply magnificent fabrication on your part, Del! Those blokes at Triumph should watch your vids to learn a thing or two! Hope you both are well there… 🏍👍🏍

@Moonfleet41

Жыл бұрын

Thanks Gary👍, not sure they watch KZread though mate ..!

@garya3056

Жыл бұрын

@@Moonfleet41 hehe! They should start with your channel... and soon! 😎

Great idea👌👌👌

@Moonfleet41

Жыл бұрын

Thanks a lot mate!

Lovely and sensible modification there Del Nick Australia

@Moonfleet41

Жыл бұрын

Cheers Mate.

Excellent job Del, nice easy solution. Penny and you enjoy the last part of your week and stay safe. Cheers

@Moonfleet41

Жыл бұрын

Thanks mate👍, you too.. Soon be weekend..!

Thanks Del, an elegant solution and some nice tips in the video, that you may not have been meaning to show but useful to know, nevertheless.

@Moonfleet41

Жыл бұрын

Thank you James. Glad you enjoyed it!

It's a good solution. It may have been better cosmetically if you'd fabricated a joining piece with curves to match the screw head radius and placed it on the outside so concealing the the cut in the bracket.

@Moonfleet41

Жыл бұрын

So what would you then screw the screws into ?

Well mate,,,,you’re still working wonders in that workshop!….kindest regards.

@Moonfleet41

Жыл бұрын

HI mate.. So good to hear from you again, we hope you're keeping safe and well, and still enjoying the Dyna and the BMW.. Take care and stay in touch. D&Pxx

Skills Del skills 👏👏👏 Make me one please 😊

Perhaps they wanted you to come up with a solution 😉

simple idea well executed , every days a learning day

@Moonfleet41

Жыл бұрын

Thanks mate. Glad you think so!

Nice mod Del, and pretty sure if Triumph see this they will take it on board.

Well done Dell, off subject I sent this message to some snowflake at Nats Knacker sack or something like that in your support…… Bollocks seems to get mentioned by you a lot here, that’s probably because of what you’re talking, regardless of what you think of his practices at the end of the day Dell boy and Penny have contributed a hell of a lot of time, passed on great knowledge and given thousands of people help such as myself with his skills, seems to be sour grapes on your behalf, before you turn on me I’ve been there with the spray painting issues but just leave Del Boy to what he does best and why interfere? I pass on my Music teaching skills on you tube and always get knowall comments but just ignore them, Dell is different so get over it, I’m glad that this is your last post on this matter and not Dells and long may he keep contributing, he is a top man .

You're as bad as me, I see something I can better and modify it, open my draw of scrap metal get my tools out hack grind cut bang and modified.

Hi Del pure genius mate You should get that patented Hope you are both keeping well

@Moonfleet41

Жыл бұрын

Thanks Dean👍 Good to hear from you mate, we're good, hope you're well too. D&Pxx