What'd you do this past weekend everyone? I found myself in the back of a cop car during a golf cart parade hahaha oops

@joshf8097

6 жыл бұрын

Cameron Niemela that sucks

@connornichol7953

6 жыл бұрын

I went riding on my kx85

@hendleytommasini7441

6 жыл бұрын

Cameron Niemela can you send me a link to were you got your plastics?

@itsmesavagecars5783

6 жыл бұрын

Cameron Niemela why don't you build 250s motor ?

@nickolasgamble6363

6 жыл бұрын

How do you make your clutch grab sooner?

"If all else fails hit the gym" lol nice man

@MLGtroll365

3 жыл бұрын

Or SWITCH HANDS 😂😂

@cane2253

Жыл бұрын

If anyone wants to learn about Jesus Christ reply

Who are the 6 idiots that gave his video a thumbs down? His videos are textbook, no one better on youtube -its like hes teaching a class for free

@eamh2002

6 жыл бұрын

Probably 4-stroke scooter boys that think this video is insulting them :)

@zbukzbuk

5 жыл бұрын

eamh2002 or KTM users who have hydraulic clutch :P

@grational

5 жыл бұрын

Never trouble yourself with such things except to make a positive comment.

@johnmckinney8165

5 жыл бұрын

There's 38 thumbs down go fig .

@matthewtalafous2004

5 жыл бұрын

52

Never thought of that. I'll try using my right hand to clutch next time my left hand gets tired!

Or if you're a budget rider u can also use a non-expensive piece of masking tape and cone it around the end of the cable hold upwards an insert lube...

Your incredible your videos are so informative and detailed. What you have been through and still managed to push forward is outstanding. I am suffering with chronic kidney disease and am finding it hard but I've raced all my life and like you want to keep the dream alive so I also have started a full restoration on a 04 cr250. I've followed your cr 250r build and you really have inspired me.

Im so happy that I found your video's. The passion that you have for the work that you do truly inspired me. Thanks for your great video's.

Even that this is 5 years old, it is perfectly what I was looking for. Couldn't find anything such useful. Million Thanks:)

Hey I just wanted to say thanks for these videos man. Coming from a background where I didn't have a mechanically inclined dad it helps a lot having someone knowledgeable explain stuff and show it to me.

Cameron, your "how to" videos are exceptional. Well done.

Im loving all the vids dude! Really helping all of us out! But I’d love to see the build vids come back up

Thanks for the tips dude now I have a smooth clutch and want more crf 250 build

I love the simplicity of all your videos man, that's what originally attracted me to your channel. Everything is explained in detail and the clarity of your videos is without a doubt the best! I've recommended your channel to numerous people who have needed help with certain issues! A big two thumbs up goes to you and your channel. Oh and i needed to watch this video again because I'm gonna lubricate my cable this afternoon! As always #Camstrong

@CameronNiemela

4 жыл бұрын

Thanks man, much appreciated!

I have a 2004 cr250r and want to see more of your build man!!!

Gonna buy a project soon for sure gonna watch every one of the vids back!

Best in depth how to videos ive ever watched so far.. 😊😊

Totally hit those links for the lube tool and lube plus grease thanks brotha I was in need of this

This has been the best video on this topic so far thank you!!

Sweet Video Cam, thanks man, I'm going to apply these tips today.

Good video as usual I prefer the split block type cable luber, its cheap as chips and is pretty quick to fit and remove but they can leak so wise to wrap a rag around it when spraying the lube in. I also use silicone lube on cable or some such lube that sets dry in the cable, oil lubes can tend to attract dirt.

Lubing up the cable and bolts really helped, it took me 2 fingers to pull in the clutch and now I can pull it in with my pinky finger👍

Super helpful and easy to follow.

Most legit, best content, and straight forward dirt bike guy on youtube! glad I found your channel. You're very educated and easy to follow, well versed and fuck the haters keep killing it. you know your on top of the game when they hatin, lol

One Works Connection lever $160 = OUCH! Been using the Moose Easy Pull system for 2 years now on my YZ without a problem, works great and has 3 levels for adjustment. I payed less than $40 for mine at Rocky Mountain MC/ATV.

Thanks man...VERY informative! Know what to do to MY clutch situation now!

Thanks for another helpful video bro.

I'm a shifter kart guy and you videos help me so much keep them coming

So much info.... Immediately subscribed

One easy trick if you dont have tools like this or a shop to buy one in a hurry. Buy some heat shrinking tube and side it over the grommet, heat it tight around the metal endcap and pour some lube of your choice into the tube. You can push the lube through with compressed air or a big syringe :) You can also clean the wire up if you spray some brake cleaner through the cable first.

thank you for this video! finally a video that shows everything!!

Estou encantada com esse cara “cameron niemela” muito inteligente 🤓 estou aprendendo muito coisa 😍 🇧🇷

Otima dica, Cameron! Admiro muito seu trabalho, você poderia me levar do Brasil pra trabalhar com você, ser seu ajudante. rs Congratulations!

Love your channel valuable resource! You should teach a hands on maintenance and repair class right out of your shop.

Nice work very helpful

Bro im dying to see another 250 video can't wait bro!!👍✌🏁🔩🔧

Finally a good video on this topic

im new in the dirt bike world , and you're helping me a lot with your videos, new sub :)

Yeessss I need this my clutch is stiff as a rock

I want more cr250 build!

Would like to see a KX250 build. Great videos, keep em coming.

Great informative video as usual! Your Chanel is helping me rebuild a 1997 yamaha yz 250. I've already put your Scotch-Bites to work cleaning parts. Any videos on blue 2 stroke bikes would be much appreciated!

@CameronNiemela

6 жыл бұрын

Thanks Adam!

great tips as always

Great tips thanks.

New fibres and steels in my clutch with the old genuine springs. Lubed the clutch cable and greased lever in perch. Now its as smooth as a gravey sandwich.

thanx man ! that helped me

You da man. That was superb. Thanks.

thank you ! love your videos .....

Good video Cameron I will have to try that motion pro luber. I tried their other type with no success it just made a big mess. How are you doing Cam I hope all is well with you.

Nice presentation.

thanks for the tips!!

thank you this video really helped because my klx125 i have to use my whole hand!

Top notch videos my friend 👌

Very good as always:)

as always so useful TK

Great video

Nice one! Thank you

good job men! but why you didn't greased inside the clutch cable after the lube cleaning ? or it's ok just with the lube ?

I've been thinking about buying a hydraulic clutch kit with a slave cylinder for my CBR600 because the clutch is quite hard to pull. But the more i think about it, the more i begin to think that i've just gotten used to a 125cc clutch and not used a 600cc that much, so i might just be weak af. I might have to try and lube the cable again.

Bonjour Cameron ! Verry nice video ! My TM 125 is full hydrolic ! 😉 ! Excellent day for you ! 😉 💨 💨 💨 !!!...

Great vid 👍🏻🤙🏻

Thanks. Good stuff

My clutch basket is grooved. Fixing to replace that along with clutch and fibers. It's annoyingly tight. Might even throw a hydro or an ez pull lever. I've had a tight left forearm for 3 weeks since my last session where I forced myself to keep riding beyond the fatigue.

Great videos love it

Not something really hard to do, but that bearing on the pivot of the lever surprised me. I don't know a single brand here in Argentina that sells something like this. Btw, nice video quality, as you always do.

I got a race clutch with some hard springs it’s a 4 finger clutch pull it’s hard after a couple hrs I have arm pump got a new cable too

Thanks Cameron

Hey cameron, as someone with smaller hands, how would you adjust the lever to stay closer to the handlebar? It says on the website you can just that but I just don't see how its done. Thanks

Great video bro, I will def checkout some of these tips next time I wash up my bike

@CameronNiemela

6 жыл бұрын

Thanks man!

Do you replace those side case gaskets every time you remove them? Or do you re-use them.

I got a cable by all balls and it works pretty good

thanks Cameron

I built an 85 ATC200x that has alot of spare parts with it including a clutch basket with notched fingers and one was even broken! Wonder what that action must have been like...

One thing Cameron didn't mention is the clutch lifter arm if it is worn where it pushes on the clutch lifter rod and the pivot point where the cable connects also gets worn it makes a huge difference in the clutch pull he spoke on the lifter arm bearing but not the arm it's self

Sweet video👌

Thanks! What year is your CR125?

amazing bro thank u

What clutch lever is that? I like the adjuster

I Love that bike!

You should update the link to the model of clutch you like. I would like to buy this.

Great to know these things for when I get my bike, getting crf 125 or 250 not sure yet.🇮🇪👍👍

@johnfkennedygaming693

5 жыл бұрын

Stephen Byrne I’d say an 80 2 stroke or 125 two stroke for your new bike an 150r is perfect but a 250 is really big man

@stephenbyrne208

5 жыл бұрын

Rj Rj yes probably a 150 sounds better.👍🇮🇪

Is there any other thing u can use apart from cable lube because I don’t have any like crc or something

switch hands lmao. Great vid always, super informative, to the point, and well thought out

@CameronNiemela

6 жыл бұрын

Hahaha thanks for watching!

What is the little Allen set screw on the adjuster star used for?

do you think a migura would work if the cable end is enclosed in the case like yours is and like mine is on my yz? I don't see it happening but figured I'd atleast ask, Thanks

So i have a crf70f and up until this past weekend it's been rock solid but recently it has been rolling away while in first gear i cant figure out why i did adjust the idle screw but iv tried adjusting it back and it still wants to take off on its own qhen my son put it in 1st gear any ideas?

Could you maybe make the same video but with a hydraulic clutch

I installed a Magura Hymec hydraulic line. But because I'm a crappy mechanic the engine burned through it... thankfully home was mostly downhill or I would have been stranded! Nothing beats running beside a bike to get it up to speed and then in gear (at stop lights no less).

My yz450fx has a hard clutch lever pull and when it's on the stand in gear I pull in the clutch lever the rear tire still turns. Any ideas? I want it easier to pull. Cable is lubed and in good shape.

you sure a notched basket will affect clutch pull? seems like the pressure plate is going to release the same wether or not the plates stick

is it possible to over tighten the clutch springs?

Great video man

Thanks 🍻👏👏👏

2000 cr250r if I pull my clutch lever in and it’s in gear should the bike roll freely or what may be the problem?

i bought a second hand 2012 crf450r and it has a magura hydraulic clutch but it still feels kinda hard to pull?

Wow that is amazing. I’ve seen another Motion Pro tool for lubing the cables. Thank you ! This helps tremendously! What do you do with the rags after you’re finished. Wash in the washing machine you wash your clothes in ??? Do you use specific detergent or do you wash them by hand 🤚?

@CameronNiemela

6 жыл бұрын

Thanks for watching man! I just toss the rags once I'm done. They're just old clothes that I cut up but you could definitely wash them!

Is there a budget friendly version of that lever?

I haven’t watch the video yet so I don’t know if he brought this up but putting good oil in your bike it’s a good part of it use mobile 1 oil

And make some videos about mixing 2 storke with fuel please

Can you do a video on how you remove stuck on gaskets. Specifically on really old bikes. Another video idea for you is explaining handlebar bends, I'm clueless in that area.

@CameronNiemela

6 жыл бұрын

Great ideas!

@joshmx7161

6 жыл бұрын

Yes please explain handlebar bends.

Hey, do you think you will ever go to horn rapids in Richland? You should ride/race there and have a fan meet up.

@CameronNiemela

6 жыл бұрын

I'd love to some day!