That Rig is shockingly good!! Element has been underrated from day one! But the PERFORMANCE of the IFS is just shocking. Of course the 1080 just makes ANY Rig better!

That is a cool truck! Love the suspension on it, works great on your rocks!

Just ordered myself a 1080 esc for my trailrunner because mine had a huge smoke show because I may have used it like a submarine... liked and subscribed 👍👍😂😂

You sir, always impressive. That rig is turning out to be impressive as well. Love the body. A bit busy this morning but just had to.... Take a loook

Great 👍 vids... 1080 is my go to for my crawlers

I love you push things to the limit because if it's no Exocage rc approval not on my shelf.... Great Video again, an Happy Independence Day to everyone as well. Awesome video after the control Joe that's next truck to the collection.... an it's going to be pushed....

That's a great crawler with the engine & easy I like the way it went down hill most impressive. The body still make a lot of noise compared to other crawlers,😀😀😀

Wow this thing is super sweet.

Would really like to see how the ifs Enduro does with a better more performance style of body fitted. So far it has been quite impressive dragging that Tupperware tub body about. Have a great weekend mate.. Cheers 👍

@NaturallyRC

4 жыл бұрын

Tupperware 👍 LOL

This vid was very helpfully, thank you so much!

Love your Videos!

I just put a 1080 in my Scx10 ii. Awesome esc 👍

1080s are my fave and I run nothing but. So smooth, especially when you ENABLE freewheeling. More people would do this if the name weren't somewhat confusing/misleading.

@OswaldBeef

4 жыл бұрын

Yea man I love the freewheeling setting on. Dumb name. Like having 15% extra punch and extra drag brake. Love it

@Jrod_FPV

4 жыл бұрын

I heard that on the 1080 , when you set free wheeling to ON, then you get better speed matching on descents. So for example if you hold 5% throttle while going downhill, with free wheeling set to ON, then your speed actually matches closely to 5% of your speed. Whereas with freewheeling OFF, when you're going downhill at 5% throttle, the truck has sort of a runaway and goes whichever speed it wants to, which is typically about 100% speed. Just wanted to clarify that's what you mean by misleading, because I too think it's misleading! Can you confirm this is true on the 1080?

@OswaldBeef

4 жыл бұрын

Jrod FPV that’s seems to be what I experience going downhill yea, certainly more control. going flat or uphill I can get my truck literally bouncing with throttle pumps...its description read to me like it’s holding extra current in my esc to motor wires instead of letting my motor dissipate the extra off.....so there’s always a little extra there right of the bat each pull.

@NaturallyRC

4 жыл бұрын

@@Jrod_FPV Not my channel, but since you ask :-) I can't give you precise percentages but you're right that slow descents are better with 1080 Freewheeling enabled -- enough to make your jaw drop. When I say the setting name is misleading, I have spoken to people who assume it means when they release the trigger the rig will keep rolling until they apply reverse throttle...something you would see at the track. Not the case. John Holmes himself has tried to explain to the unwashed masses like me what the electronics are doing, but I prefer to think of it as pure witchcraft. 😁

@Jrod_FPV

4 жыл бұрын

@@NaturallyRC yes it's an amazing feature! so strange they labeled on/off backwards!

I saw your video on the 12T - 15T comparison and figured I would go with the 10T on my Gen8 with the 1080 esc.

I’m using the 13t 550 crawl sport on the 1080. My scx10 iii still has slight role on 100 percent drag brake. The freewheel works 100 percent for me.

@ExocagedRC

2 жыл бұрын

yeah it will

it pretty cool rc sir. i really love it.

Its good you're explaining the "freewheeling" setting. I think it's the least understood setting amongst noobs. I learned on the Spektrum Firma 40 ESC that you actually want the freewheeling setting set to "ON" in the settings. Which is counter intuitive IMO because to me, freewheeling ON makes it sounds like the wheels are free to turn at their own speed when going down a hill. I heard the 1080 is also named backwards like this. But anyways, yeah this setting is CRITICAL for down hill control and I'm glad it exists. Set it to ON for best downhill control.

@ExocagedRC

4 жыл бұрын

Yes it’s backwards to me too but it is what it is.

Would you mind making a vid showing your ideal settings on your 1080? Always curious as to what settings other people are running. awesome video!

Had my eye on this truck for s little bit now but had my doubts as well. I'm glad you have made this little series on this truck lately. I think it could make a pretty cool scale and trail truck that could be a lot of fun mainly because it's not too capable so therefore it doesn't need a comp course to have fun and be challenged. Hopefully there are a lot of scale accessories made by some companies down the road. Also Joe, do you happen to have any how to videos on things such as installing new motors and escs? I think a lot of viewers might be doing some upgrades if they run out and get this truck. Also maybe a quick vid showing what you mean about using the affiliate links. Just a simple screen capture w a voice over to show people really how easy it is to help the channel when they purchase ANYTHING on those sites. Actually better yet, I'm going to be doing some purchases online later today and I might just go ahead and make a quick 20 second screen cap of me using your links when I purchase stuff. Then I will send it to you and you can do a voice over if you decide to use it in a few vids. Have a great weekend everyone!

@ExocagedRC

4 жыл бұрын

That would be awesome for the affiliates. I’ve got a bunch of videos on motors in many different trucks. Got a few on this one already.

It's funny, I have a real 4Runner of this bodystyle, and this is super accurate...Low clearance under the IFS and always dragging the rear bumper...it's just like the real thing!

@ExocagedRC

3 жыл бұрын

LOL

why would the 10T be slower than the 13t Joe? or did I miss something did you change out Pinions or 540 vs 550? I have an CMS 550 8t on order right now at HH gonna throw it in my Element..

Great demonstration of the crawling capability of this chassis. Any time now that servo should die, doing what you're doing. Ha. Might do to point out that with those 5-slot motors the low turn number equates to double-digit regular brushed motors. The stock Reedy feels like a 27 turn to me.

@ExocagedRC

4 жыл бұрын

Yeah I’ve mentioned the turns and stuff in previous videos. But according to Holmes the 13t is like a 27t for the 540 size motors. The 12t is like a 21t for the 550 size motors.

@NaturallyRC

4 жыл бұрын

@@ExocagedRC Close enough.

Just bought one. Did the IFS break or give you any issues? I was hesitant because of its complexity, but I only have Toyota-esque bodies for RC. Any long-term durability notes would be greatly appreciated. Thanks.

Im building a rc crawler and I think i’ll use the 1080 because it seems to be very smooth and not jerky unlike the one in the cc-01

@NaturallyRC

4 жыл бұрын

You won't be disappointed.

This is a soccer moms dream Rc car

@ExocagedRC

4 жыл бұрын

LoL that’s true!

I just got a crawlmaster 8t. Do you think it'll be too fast?

what if its 2 speed or with high and low

I have the axe 550 3300kv in my element and it fits perfect.

@ExocagedRC

4 жыл бұрын

Really? Wow that’s a lot of motor. How’s the speed on it?

@Slaters_RC

4 жыл бұрын

Exocaged RC perfect for what I built it for. Started with the builder kit and put the ifs on it with a for raptor body.

A Hobbywing 880 ESC, Crawlmaster Sport 8t and 4s would wake it up a fair bit

sweet i have the 550 crawlmaster pro in my coyote with stock pinon and spur gears running at 40% forwards and 50% backwards should i change the pinon from the 17 tooth to make it go slower it has the hw1080esc to

@ExocagedRC

4 жыл бұрын

You shouldn’t need to adjust the speed down like that. Use a much smaller pinion gear so you can run motor % forward. You’ll gain a lot of control when properly geared.

@rileykairc

4 жыл бұрын

@@ExocagedRC it's 17 tooth standard I have a 12 tooth will that be OK it's my first time with a decent motor I normally use cheap motors and leave everything standard

What do you mean by "I don't have any brass on this thing?" what does brass do special to crawlers? I'm not really into them but your making them look good... I might have to get one just because!

@ExocagedRC

4 жыл бұрын

Brass is a tuning option for crawlers to add weight down low for stability. As with anything, you can put too much on there. Glad I’m making the scalers look good, they are my favorite.

@NaturallyRC

4 жыл бұрын

@@ExocagedRC I'm glad you mentioned "too much" brass. Rather than piling on weight down low (stressing and breaking drivetrain components) I suggest more attention to picking better lines. A good start would be building a practice area just like Exocage (and also watching his videos to see how he does it).

Excellent video mate, ¿you run this 10T on 3S or 2S?

@ExocagedRC

4 жыл бұрын

This was on 3S.

What has more power a 25 turn or a 4 turn brush moter.

@ExocagedRC

3 жыл бұрын

Well. That’s a huge difference. The 4t can make more power at higher rpm but it will pull a ton of amps to get there. The 25t will be more efficient in most every way but slower. For a crawler 25t all day. I’ve never seen a 4t brushed motor.

Wats the fastest u can make this one go? I want 2 put the set up in a rock bouncer but want it faster then 6mph

@ExocagedRC

3 жыл бұрын

high kv big pinion, maybe 20-30mph

@vincec9451

3 жыл бұрын

@@ExocagedRC thank you.

Now its a good walking speed,hmm

I have the 12t version 550. Wondering is it will be worth going to the 10t 550?. The torque is unreal!!

@ExocagedRC

3 жыл бұрын

if you're going to buy one get that 8t, love that motor!!

@p.k.808

3 жыл бұрын

@@ExocagedRC Thanks bud!! Appreciate you response I will watch that video.

@buddasac

3 жыл бұрын

@@ExocagedRC Will the 8t work with the 1080 esc? I'm reading it they recommend a 16t on 3s. Maybe they mean 3 pole motors?

If i order it does it come with the wires?

@ExocagedRC

3 жыл бұрын

If you add them to the order from Holmes yeah. It’s an additional $5

What is the drag set to? 80%?

@ExocagedRC

4 жыл бұрын

I believe it’s at 100%

How would you compare this to the gen8 as far as crawling?

@ExocagedRC

3 жыл бұрын

Gen8 would win in a crawling contest. The IFS is low and hangs up on a lot of stuff.

@ncscs8815

3 жыл бұрын

@@ExocagedRC Thanks

Waiting for you to drop in a roc412hd with a mamba X on 3s and a 444 servo 😬

@ExocagedRC

4 жыл бұрын

LoL this little truck doesn’t need that kind of power.

Drop the 8t in!!!

3s or 2s?

@ExocagedRC

2 жыл бұрын

3S

@goreyboggs

2 жыл бұрын

@@ExocagedRC dang that is slow then. I need to get my Gatekeeper some wheel speed.