You built your wire harness yourSELF!!?? 😳 Now THAT's being serious about customizing to your own needs. Wow. Never heard about anyone doing that before. Kudos!

@49ccscoot

4 жыл бұрын

I don't think there's a need for most people to do it. I've built a few. When I moved stuff around, the stock harness just didn't work without a bunch of modifications and there was junk to cut out like alarm stuff. At that point I figured I might as well make my own from scratch with larger wires. Then I did this one a bit ago because I wanted to use sealed connections everywhere that I could and a fuse block instead of just a single fuse. Probably a largely pointless endeavor, but I was hoping it could lead to a good quality reliable harness.

Thank you for this Brent. I have my Malossi Aluminum OR kit ready for winter tuning, saving up for the MVT iggy now. I plan a full add-on to my current thread on your forum.

Thank You for doing this! A lot of folks do not fully understand timing and degrees, how to use a wheel and so forth. You are doing the sport a great service by providing this information. Much respect for your efforts sir. As i have said to you before, clearly explained and clearly spoken. Excellent segment!! Extremely informative, Thumbs WAY up bud!! Happy and merry to you as the holidays approach, you and the family.

@49ccscoot

4 жыл бұрын

Thanks and happy holidays to you and yours as well.

Stoked to watch it rip again. Max Powaaah

Nice video again man thx, hopefully he'll rip in the next video! Thinking about maybe using a HPI 2-ten ignition system on my Honda MT-5 with 125cc setup.

Installed mine yesterday @0.35 BTDC.

I set mine to 0.35 btdc and have never looked back it runs awesome and the ignition is awesome!

@stianvelandliland6284

3 жыл бұрын

What setup do you have?

@robertponsford8493

3 жыл бұрын

@@stianvelandliland6284 stage 6 r/t 70cc

@stianvelandliland6284

3 жыл бұрын

@@robertponsford8493 hmmm, i have airsal xtreme c45 88cc, and people say tjat i need 0.35 aswell🤷🏽‍♂️

Omg good job showing both instruments as well as the ignition in one shot. wonder how you did that 😂 i probably need a different editing program. Next year...😅 i got too many projects to work on as it is already

@49ccscoot

4 жыл бұрын

I use Cyberlink PowerDirector. Not the most popular, but it gets the job done at a reasonable cost IMO.

@Lifeisawheelie

4 жыл бұрын

@@49ccscoot aha. I didnt think it was capable of merging 3 videos into 1 so nicely. I've tried the free version and its very intuitive, just lacks most features. On the contrary, sony vegas pro 13 lets you do anything you can think of.. however you almosy need a bachelors degree to use it for something as simple as making a slowmo sequence.. Can NOT recommend sony vegas pro for anyone unless you need absolute control over every single adjustability. I'll look into "simple" editing programs. If it gets the job done for you, i can't imagine i'd need anything "better"

I think you cut that ignition wire a little short, would pop out if you hit a good bump..

Hello all: I am having trouble with my 2005 Yamaha bws after I installed my MVT Premium Inner rotor ignition. The problem is that when it’s at idle the rpms sit at around 3700 rpm and if I turn my idle screw down to lower the rpms it eventually dies out at around 3500 rpm. With that my engine starts to heat up with in about one minute running time it gets to 200f and will continue to climb. This never happened before everything was pretty normal before the upgrade. Any help with this would be greatly appreciated!!! Also when I installed my MVT Premium Inner rotor ignition I fellowed the KZread video guide that 49ccscoot guy made. I set it at .40mm from top dead centre since I have a standard crank. Thanks again for any insight on this.

@49ccscoot

Жыл бұрын

I would start with carefully re-checking the setting of the ignition.

Can I just fit the Mvt and it will charge my battery or do I have too do something to make that work

@49ccscoot

Жыл бұрын

Install it and make sure the wiring and regulator are correct for it and it should charge. If you are lucky enough to have a scoot that it's made specifically for, it should just be an install. For something like my Chinese scooter, you'll probably have to do what I showed.

I don't know if my message got sent but I'm doing a modification on my RS 125, i have machined the rotor to fit it on RS and now i could use some help with the stator wiring, what is the Red/Black wire on the stator, is it a pickup and does it shares common ground with the rest of the chassis ?

@49ccscoot

3 жыл бұрын

My guess is that red/black is a combination of an exciter output and pickup. The MVT has no dedicated pickup wire as far as I can tell, so I assume it must use changes in voltage for that. Red/black should not be grounded, but if you meant the MVT grounds; I tied them in with my other harness/chassis grounds.

quick questrion: do reed spacers work? I've heard they increase throttle response but what is the science behind this?

@49ccscoot

3 жыл бұрын

I've never installed a reed spacer and really noticed a difference. However; I still use them. If you install reeds with the cases split, you can see that the reeds do sit low and flow should improve if you raise them a bit. Even better are the angled spacers that allow the reed block to point toward the transfers a bit. You do decrease primary compression (crankcase compression) a bit, but that's not necessarily a bad thing with a good tuned exhaust.

Is it possible to wire a kill switch if my cdi does not have the kill switch wire? I have the Rj34-8 mvt cdi

@49ccscoot

Жыл бұрын

49ccscoot.proboards.com/thread/28599/mvt-digital-direct-wiring

@isaiahdaquioag7044

Жыл бұрын

@@49ccscoot Mahalo!

Awesome Videos! And you are really go into Details - thumbs up! You are really habe Thors Tesching still :-) I have installed my MVT DD on my 70ccm MALOSSI Speedfight. It runs Not with 0,35mm btdc. IT is stuttering like as hell. When I go with 0,1mm btdc it is only stuttering in the middle section of rpm. Should I go with 0,3 atdc? What I am thinking about is that the mvt has a to aggressive ignition timing for my base tuned Scooter. Ori do you think I should double Check ignition and cdi? Do you habe some checking Numbers? Thanks a lot and greeting from Germany! Marco

@49ccscoot

3 жыл бұрын

I would double check everything first. Go over your whole setup and find out what the specs are from MVT for your specific MVT model number. They have some instructions on their site. It's not unusual to find more power with a little different setting, but I wouldn't think it should need to be set ATDC.

@maha9380

3 жыл бұрын

Thanks a lot your time and response. I doublechecked All Electric Parts and found the Problem. Whereas ignition coil itself was totally in tolerance, the spurk Plug connector was not! Thank you so much for your Videos, as you give so much helpful und detailed Information! Best wishes from Germany!

@49ccscoot

3 жыл бұрын

@@maha9380 I'm glad you found your issue and always happy to hear that my videos help! Thanks!

8:15 where would i wire my headlights?

@49ccscoot

2 жыл бұрын

You should be able to leave it wired just as it was if the bike had headlights before.

friend I have a Derbi gp1 and I cannot mount the cables mvt digital direct model DD09 it has a piaggio motor

@49ccscoot

4 жыл бұрын

What do you mean you can't mount them? Do you mean you just can't figure out how wires should be connected?

@ejjimenez3753

4 жыл бұрын

@@49ccscoot You are Correct Hi is my Brother the problem is we don't find a diagram where to conect the white wire and the yellow because his regulator have different colors hi is trying to make it to charge the battery

Have you ever had a new aftermarket ignition stator and flywheel make a whining noise? Higher and louder the faster you go?!? I thought something was rubbing but now I don’t think that’s it

@49ccscoot

3 жыл бұрын

Can't say that I have. If you have any sort of electronics with speakers, then it could be interference there. Otherwise, I'd think it would most likely either be contact or maybe the flywheel has some feature that makes it noisy.

@nastynatesscooters9896

3 жыл бұрын

The one that is making the whining noise is the mvt millennium.easy to install, my Yamaha jog was stuttering at high rpm and the new ignition fixed that.. but it whining kinda like a speaker in a car but I have no speaker connected the noise is for sure coming from the stator area I couldn’t see anything making contact

@49ccscoot

3 жыл бұрын

@@nastynatesscooters9896 If there's any significant contact, you should see witness marks on something. Don't take this as negative, but are you sure you aren't just noticing the CVT whine now?

@nastynatesscooters9896

3 жыл бұрын

No it can’t be the cvt. It’s noticeably coming from the flywheel area. What would make the cvt whine like that?

@49ccscoot

3 жыл бұрын

@@nastynatesscooters9896 The belt.

Sir can u please send me a video how to use degree wheel and dial gauge its make me crazy thank you

@49ccscoot

4 жыл бұрын

kzread.info/dash/bejne/o2iMkpVmepq5hbQ.html kzread.info/dash/bejne/hn-IsK2Ac8i1m8Y.html

@Asteria725

4 жыл бұрын

Sir i already know how to find tdc I want to know how to find center line full video sir thank you very much for please

@PchelaUbica

4 жыл бұрын

@@Asteria725 you have all in thiss video

Mvt have horrible support and they dont give a lot of information , thats correct :s Btw that exhaust you have , on what rpm it work?

Is the wiring diagram can be use on any bike?

@49ccscoot

4 жыл бұрын

Should apply pretty well to most Minarelli horizontal engines. The reg/rec pinout may be wrong.

@mohdjemadil4527

4 жыл бұрын

@@49ccscoot thank you for the info sir... Keep up the good work on your video... I hope u come up with more extreme mod in futurs

So, putting boost to a 2 stroke, stupid or beneficial?

@49ccscoot

4 жыл бұрын

I would say not the best idea unless you really want to get yourself into a big project that's different from what everyone else uses. A couple of projects that I recall are the Buddfab Streamliner and one from High Gain Tuning. The Buddfab build was a couple of professors and the other was a top notch professional tuner with a lot of experience, a large budget and a dyno. Not saying you can't do it, but it's not gonna be worth it for what most of us are after.

@TylerHartman

4 жыл бұрын

49ccScoot would you say an electric “turbo” works for tiny engines, 50cc. Or are they still rubbish?

@49ccscoot

4 жыл бұрын

@@TylerHartmanI think they're not gonna do much. 2Ts work very well with a tuned pipe and good cylinder layout. Money and time are best spent there.

Does this apply to the piaggio zip too ?

@49ccscoot

8 ай бұрын

I think so. I got the Piaggio version of this ignition for my RC-1 later and it was all plug and play from what I had IIRC.

@dutchmastertextdutchmaster9617

4 ай бұрын

@@49ccscoot a friend of mines has this ignition and is over reving to 18,000 rpm how do you lower it down?

@49ccscoot

4 ай бұрын

@@dutchmastertextdutchmaster9617 Usually a curve where advance increases where you want it to stop revving will help, but you can't change the curve with the standard CDI and I don't think the EPROM CDI has curves that do that. Heavier rollers?

@dutchmastertextdutchmaster9617

4 ай бұрын

@@49ccscoot we saw your other video where your rpms was showing double we think thats whats goin will give it a try n set it up thanks

Second!

Would you be into building my Zuma up??

@49ccscoot

4 жыл бұрын

I don't really work on stuff for other people. I did it for a while, but I can never get enough of a customer base around here where no one rides to make it worth the effort.

@sammie21613

4 жыл бұрын

49ccScoot that makes sense. I just don’t have the time to just get it done, you should try to get a code from that company you get parts from. I picking up all new plastics from them the first of the year. Appreciate all the great info, if you change your mind or want to do a Bug Zuma build let me know.

How Will this do with 70cc ?

@49ccscoot

4 жыл бұрын

Should be similar to this.

@joelkilly

4 жыл бұрын

@@49ccscoot ill put IT to My fantic performance 2019 thank you

@joelkilly

4 жыл бұрын

@@49ccscoot im buying this Set from maxiscoot but IT doesnt show The rpm so can u still tell me it please🤔

@49ccscoot

4 жыл бұрын

@@joelkilly What RPM? The ignition is supposed to be OK to 22,000RPM.

@joelkilly

4 жыл бұрын

@@49ccscoot well how strong crankshaft Will i need i have a16.000rpm one

yeet

First