Thanks again to Fedex Office for sponsoring this video... the banner I had them make 3 Years ago (not in this video) is one I still use for my Makerfaire Booths!

@ghostn00bs74

28 күн бұрын

I need help 😢 I don't know what setting is best for Super pla+ 😢 please help me out. I use orca slicer

Printing 'fad' flexi or the current meta and selling on Etsy seems like soul crushing race to the bottom.

@UncleJessy

Ай бұрын

Indeed however… they are still selling which is wild to me

@UncleJessy

Ай бұрын

Yup! That’s what I was trying to state with my 5th point. Amazing

@Kawalzki

Ай бұрын

They seam to sell best at local events... online is definately a race to the bottom

@gruffmadness

29 күн бұрын

@@Kawalzki Yeah, I'm seeing them everywhere these days. I think I'm seeing the saturation point.

Just one comment, because your videos are not normally misleading. You really need to differentiate between turnover and profit. Those numbers you are showing at the beginning aren't income, they're turnover. And the two figures tend be very different!

I complete agree about the thermal printer. I waited way too long to pick one up. On the other hand, I tried posting a set of models on Printables under a non-commerical license and selling them on Etsy... never again. Not only do people ignore the non-commerical license, I actually got threats from multiple people selling my designs on Etsy to take down my shop or they'd report me for stealing their IP. It was just a very negative experience.

@jesushernandez7802

29 күн бұрын

I would’ve shut down their shop instead

@AnthonyMartocello

29 күн бұрын

@@jesushernandez7802 I get it and in the end I did file some complants with Etsy, but it just soured the experience, at least to start. I was hoping to give a little back to this generally awesome community and have fun with a small side hustle which, if nothing else, would justify my ever expanding collection of printers and filament. Thankfully, things have calmed down a lot. When it started, I was one of the only people filling a very small niche. Now there are at least a dozen designs filling the same function.

Thank you. Several good tips. I am glad YT actually notified me (they haven't lately) but several others I watch have had negative things to say (mainly too saturated so don't waste time and do something else) so a positive video is uplifting.

Tip #1 Make a video about how to make money 3d printing

@UncleJessy

29 күн бұрын

😂 sharing is caring… “now sign up for my 30 day online class” 😂

Yes the painter paper! huge savings!

Lots of great tips here! Thanks for sharing :D

Thanks for sharing 🤘🤘

Great advice regarding camera gear. Lighting is by far the MOST important part of product (and really, all) photography

Danm, Perfect timing, I put some stuff up the other day, figuring I have spare room on the build plate and can always throw some stuff on for people who want it, got a sale last night, thought my conversion rate was me doing bad, but seeing that 1% on yours during the intro makes me feel a bit more comfortable in that its probably just the way it goes.

grateful for where i work when it comes to shipping materials, free boxes and so much free kraft paper

"When everyone is looking for gold, it's a good time to be in the pick and shovel business." Selling prints (aka gold) is the sucker's move unless you had first mover's advantage, large amounts of equipment etc. Shovels and picks in the 3d space would be things like selling 3d designs, or equipment for 3d printers like Uncle Jessy's ResinLapse cable. Cover all your bases and do all 3!

Thanks for the video UJ! I have my first local booth next month and was ordering tables and a canopy this morning, so this video couldn't have come at a better time. Making myself a banner on FedEx office as I type this!

I make jack. I spend an insane amount of time cleaning and sanding my resin prints so they are pristine when they go out. My competitors win though because they sell lower and don't spend time cleaning up. I ordered from multiple other sellers who sell the same stuff before i started selling in order to test the quality. Models were rough and covered with support blobs and holes, packed with minimal padding and thrown in a envelope. I'd be embarrassed to send stuff like that out But these listings say they have sold loads with great feedback. I don't understand it..

@ScytheNoire

Ай бұрын

If customers are buying and satisfied without sanding resin prints, then sell like that and save the time and money. Quite often, and since you say this is resin, many are okay putting in a bit of time finishing miniatures or statues. Surface finishing is part of the prep to paint.

@EffinWit

29 күн бұрын

You could offer 'raw', and sanded versions and have pictures of the difference. I'm not sure on the legality, but maybe you could include photos of competitors products for the customers who aren't, or wouldn't be satisfied with that level of quality and are happy to pay a premium for sanding or extra packing material, etc.

@ScytheNoire

29 күн бұрын

@@EffinWit It's legal to show competitors work, and most likely within the rules of Etsy, as long as competitors aren't singled out by name, and their photographs are not used. If you take pictures of their products as you received them, and don't name them, then should be safe. However, perceived attacks on competitors may turn away some customers, or be written off a marketing BS like we too often see with scam products. Usually better to show why yours are better than show why others are worse.

Thank you very much Uncle Jesse!! This is super helpful for anyone that wants to sale at Etsy.

Great stuff, your the best Jesse

@UncleJessy

29 күн бұрын

You rock!

Great Video! I've been designing some R/C products and selling them here locally and been toying around with opening an Etsy store and trying to sell them there as well. Thanks for the Information!!

For selling on eBay, one thing that I use for in-box packaging is plastic bags. It sounds crazy, but they do actually provide pretty good cushioning, and it's a way to put them to use outside of a being used as a small trash can bag. I also tend to save boxes that are shipped to me as I'm not a fan of recycling boxes and then needing them. You do need to be a bit careful to not go too crazy with hoarding and some Amazon boxes rely upon the paper tape to close gaps inherent in the box. (I always hate it when I run into one of those!)

Love that this came out as I’ve been mulling over selling 3D prints! I’m curious how many printers you started with vs how many you’d recommend starting with for printing and selling stuff? Love the content by the way, keep up the good work!

Tried selling a bit on Etsy but the fees were killing any motivation. Keep the prints simple might be a good suggestion as well. My model was made of 4 interconnecting parts that needed to be printed separately. This increased my production time. Also be prepared to take criticism from people that don’t understand the limitations of 3d printing. I was using a Bambu Lab printer at a very fine setting and I still had customers complaining that it didn’t look as nice as they had hoped. It hurt a little but I know it wasn’t personal.

@UncleJessy

29 күн бұрын

Etsy fees are wild. And yeah, in every listing I include a line that explains they are printed and you will see layer lines or potentially small imperfections

Great advice, thank you very much

@UncleJessy

29 күн бұрын

Glad it was helpful!

@3dprintingjean-pierrefabri854

29 күн бұрын

@@UncleJessy do you know the maximum file size that can be sold on Ebay?

I know this is a video for selling online but also look at selling in craft fairs and markets. Its more work to pack, setup, be available and teardown, but I can make more in a day than a whole month selling online and i dont have to worry about shipping.

Great video with a lot of useful tips! I am wondering about the electricity cost for a print. Is that significant to the total cost of the sale?

It's a good thing machines like the Elegoo Saturn 4 Ultra and Bambu Lab P1S is a thing. You can use the time lapses as part of making the videos.

I love to save Amazon boxes. They are great for shipping.

first time I've seen a fedex add block

Could you make a video on your top picks of resin printers top buy, legit wise as well as for beginners

It should be mentioned that if you look up someone else's rates for commision printing you should also take note of the printers they're using. In my local area it's common to provide rates per hour of printing, but obviously if your "competition" prints on Prusa 3 and you use similar or lower rate per hour you may end up undercutting yourself if you have a much faster printer. Sure you can print a higher volume and if you have buyers for that then fine, but if you print single items or very low volume make sure not to blindly copy someone's rates, but adjust them for your printer's speed otherwise you may get very small profits.

@UncleJessy

29 күн бұрын

Agreed! The 3DPrintforce app is great for that

Great video!! I don't think this advice works for other countries. I'm wondering, any other 3D printers from Mexico have any tips you could share to start making sales of 3d prints here? I'm not having the best of luck making sales.

I build 1:32 scale model railroad cars and hope to sell them soon, gotta learn to improve my work though.

Great video. I have to ask though, do you have white eyelashes on your left top eyelid?

Question would you when you're saying a mask or something would you follow the print lines like if you were standing would you go with the grain not against the grain

with 3d print force, where do you put in things like power costs, any other consumables used in 3d printing?

How do I decide between a filament printer vs resin printer? Which one do you prefer @UncleJessy?

kinda older video but curious if that thermal printer needs a new ribbon and not just the paper? I'm sure the ribbons lasts awhile but they aren't cheap from what I see

You ever get those profiles posted??

im curious if the earnings shown are gross or net profit

You forget to price in your packaging materials, your actual time investment on getting them ready and working to pack everything up and take supports off and sanding. You are pretty much working for free. Then you have printer costs, design costs. What happens if a printer breaks? You just not taking into account everything. I guess people will learn themselves when they find they have invested loads of money on all the small bits and end up with working for penny’s. Price higher people, deliver quality

So when you do the subscription to print your allowed to sell? I remember someone told me you need a license or such to sell or you'll lose all you made

Great video! Do you find that more people buy the files to print themselves or the actual physical 3d objects? And do you sell your prints globally on etsy or just US and Canada?

@ForgeCoreCo

Ай бұрын

From my experience doing both. It’s about a 100:1 ratio of people that would prefer to buy the actual item vs buying the files. Selling physical items is far easier because you market is everyone vs just people with printers

@Will_Huff

Ай бұрын

@@ForgeCoreCo Excellent point. And do you sell on a global market or just US? I know there can be some paper work for over seas customs, duty, etc.

@ForgeCoreCo

Ай бұрын

@@Will_Huff I did international for a bit, but switched to just USA after awhile because there was more issues with international shipping

@UncleJessy

29 күн бұрын

1000% I only do Canada now. It takes 1 month+ for anything international and buyers will ask platforms for chargebacks

UncleJessy got that big boy sponsor today. 😏👍

If you all don’t know, you can easily get 6k thermal labels from UPS completely free! I got a pack like 3 years ago and I’m still going through them lol I use them for my packing slips and also my shipping labels of course

Hey Jessy! You have a video going in depth with your Patreon account? Do you give access to files and give commercial license for people who pay for your Patreon to sell ? Thinking of joining just curious on those two things, love the videos!

What’s a cheap fast best 3D printer to make dragons

I need help 😢 I don't know what setting is best for Super pla+ 😢 please help me out. I use orca slicer

Are you talking about FDM or resin prints? I only have 2 FDM printers & to get an item that I feel is sellable takes a huge amount of time & effort. Also, as you know, if left outside or on the dashboard of a car on a hot sunny day the object warps. Layer lines are another factor as well as strength. There is a lot to consider when trying to sell 3D printed objects. I have heard that resin prints are brittle & can break if dropped. So many obstacles. I use PLA for ease of use.

@mf--

26 күн бұрын

PLA softens in sunlight. ABS and some of the other materials are more stable at higher temperatures.

@zroblu

21 күн бұрын

Resin print durability depends on the resin used. I use a custom blend and have prints I can drop from 6 ft multiple times and not show any damage.

Its all fun until you have to pay American taxes on this. Ive run storybookarmory for two years now (19,000 first year and $49,000 last year) and the taxes just absolutely wreck the enjoyment.

@UncleJessy

29 күн бұрын

Taxes are for sure a thing you have to keep track of and pay! Tax man cometh

@kevinphan

16 күн бұрын

check out Brandon joe Williams. You can opt out

See, I made the mistake of deciding that the corner of the market that I wanted to carve out was resin printed and painted 16" statues of movie and comic book characters. Print time is about 12-18 hours per order but it's the painting time takes all my personal time. Most of these shops out there that have huge sales numbers merely pop off the supports and pack it for shipping. Once I clean my prints I have another 3-5 hours per order to go before it sees a shipping box. If only I didn't enjoy the entire painting process so much.........

@UncleJessy

29 күн бұрын

Oh wow! I hope you are charging well for your time for the painting. That’s why I almost never sell finished painted props. I tried that once & immediately changed it to raw prints

I see you just posted this, I have an Ender 3 Pro at the current moment. I've been having issues. I want to upgrade to either the Elegoo Neptune 4 Plus or the Elegoo Neptune 4 Max. I don't know which way to go. I want to get into cosplay, making helmets and suits. I want the Max for it's size. I don't know if the size difference between the two is worth the one hundred dollar price difference, could you help me out Uncle Jessy?

@UncleJessy

Ай бұрын

4 Plus over the 4 Max. I love the Max but its HUGE and I have no where other than the floor that it will fit. Plus I can pretty much print most cosplay stuff on the N4Plus. Also, I would recommend ditching the big fans. I've found they arent really needed and just add more noise to your print space.

@flixthedev

Ай бұрын

@@UncleJessy Thank you for responding, I really wasn't looking forward to that $470 😂😂 Have a great day! (thanks for the selling and printing advice in the video)

@Bob-el3iw

Ай бұрын

Before you buy, look into strength etc, I've heard that resin prints are not as durable when dropped.

@Kawalzki

Ай бұрын

I saw you didn't include cost of packaging for shipping in the demo quote.

what t rex model is that. thanks. love the chanel

Hi Uncle Jessie, thanks for a great video highlighting all the potential avenues for selling 3D prints!

@UncleJessy

Ай бұрын

Trying to share what I can 😬

Does anyone know if Uncle Jessy has Orca slicer settings for Elegoo Neptune 3 plus?

@rambogizmo

Ай бұрын

I’m saying

I also wanted to say that I'm looking towards selling, I only have that one printer and I am trying to get the second (in my last comment) do you think this is good enough to start selling?

@zroblu

21 күн бұрын

Never know until you give it a chance. start small and buy more equipment when it's needed as you scale.

hey, Uncle Jessy, I have an ender 3 pro and I've been looking to buy a new printer and I'm not sure which one to buy I want to get into selling things not necessarily cosplay but something even for a few extra bucks. What printer would you recommend is best for $700 dollars I have available. It would be better if it were a xy core, but any is fine. Thank you for your help.

@ScytheNoire

Ай бұрын

Bambu P1S, but that may be a bit over the price limit. In that case, Creality K1C would be the best option in your price range.

@AlexanderSmith600

29 күн бұрын

Two Flashforge 5M's as they are so affordable and the same print quality as the K1C! I have both :)

@eer-sb3be

29 күн бұрын

@@ScytheNoire @AlexanderSmith600 Thanks I will look into that

So what if you implement a lot of these tips, but still are having little success with the over-saturated market? Do you have to make an individual listing for every single model you'll be selling or having a generic made-to-print approach and letting people tell you what they want printed?

@UncleJessy

29 күн бұрын

I list individual items but I also have people message me on Etsy or dm or email for specific requests that I try to fulfill. That’s where sites like 3DPrintForce come in handy with helping with calculating how much to charge

I wish I could sell on etsy but no one in the USA is going to want to buy from a seller located in South America and have to pay like $20 for shipping and have to wait over a week for the item to arrive.

@jacobovitz5269

28 күн бұрын

There is a company called Slant 3d that can print your design and handle shiping. I never used them but i watch their youtube channel.

where can i find the file for that skeleton?

Ah yes, converting your relaxing, fun hobby into a business. Such a great idea! 😂

@rafaelalavez4422

29 күн бұрын

3Dprinting its not relaxing, if you are relaxed when you are printing, you are doing it wrong

@Retronize84

29 күн бұрын

@@rafaelalavez4422 the point is that you can print what you want and it's not a job.

@MrAsmodath

29 күн бұрын

​@rafaelalavez4422 Huh? Actually, if you're doing it right, it's quite relaxing, because your failure rate is in the single digit percentile. For example, I haven't had a single FDM or resin print failure in over 3 months, nearly 80 prints. It's all in the experience level you have, and the time spent tuning/maintaining your equipment.

@Minecraftzocker135

29 күн бұрын

​@@rafaelalavez4422 what's the mood you should be in when 3d printing ? Do you need to be stressed the whole time for better results ?

@wafflecart

29 күн бұрын

This dude still has ender 3 😂

Do you sell on etsy using an LLC or do you sell as an individual?

@UncleJessy

Ай бұрын

I started as individual but switched to LLC 2 years ago

@sliverbaer

Ай бұрын

@@UncleJessy Thanks! I have been curious about starting one. Thanks for another great video.

what models are your top 2 sellers?

is there a Site that compares the Speed of Resin Printers?

@UncleJessy

Ай бұрын

Ohhhh now that’s a cool idea! Not that I know of

@bilbob7624

Ай бұрын

@@UncleJessy Thanks

Having half a million followers on one platform helps a lot too

You can get boxes from the post office for free.

@UncleJessy

Ай бұрын

Yup if you’re shipping via priority mail

@stringztoo

29 күн бұрын

@@UncleJessy I use the free USPS ones for box in box shipping. I get the free Priority ones and put my statues in them with brown packing paper, reused bubbles wrap (every bottle of Sunlu comes wrapped in bubbles), and recyclable packing peanuts. Then seal up that USPS box, put it in a 18x13x11 double corrugated from Walmart and fill that Walmart box with reused huge Amazon bubbles and more packing peanuts. Box in box has definitely saved my resin statues in transit.

A video not sponsored by elegoo!😱

@UncleJessy

29 күн бұрын

😂🤣 a few here & there Saturn 4 Ultra video this weekend then something BIG next week 🧲🤘

Anybody us ECWID to sell ? if so, can you leave a link to your shop ?

Trying to do that but not so succecessful lol

@UncleJessy

Ай бұрын

Haha I feel ya. It definitely comes in waves and sometimes its just a matter of trying to find them and ride along ;)

I could not stop staring at her T Rex!! How do I make one?!

Question if I buy STL files from someone or subscribe to them to get STL files monthly am I able to 3-D print those STL files paint them and sell them not sell the files but sell the prince themselves

@ForgeCoreCo

29 күн бұрын

Yes you can! It just depends on the creator and if a commercial license is included

How do you make sure you can use people’s 3d models

@ForgeCoreCo

26 күн бұрын

There will be liscensing information associated with the design. If you look at model in Thangs, they make it really clear

@Barry.T.racing

26 күн бұрын

@@ForgeCoreCook thanks

Wassup

But you should talk about unhappy customers or difficult customers.

I usually find videos like this don't really help the average person only because if your watching this not making money the market is already saturated and itll be next to impossible for you to capitalize like Jessy has, not saying its not possible just very unlikely. You kind of have to be a head of the game so to speak to really make money off it, for me when i look up local 3D printers there is about 15 listings for separate 3D printers that will do the job, have products listed and have the equipment to make everything you want. So for me, these are good tips but no way for me to "break out" or really profit from my area. Ebay is great if you get a good enough rating most likely from other sales but again this all might just apply to my area, and milage may vary (especially if youre in a smaller town with a low population, there is a chance youll be the only one and farmers dont realize how much 3D prints they could actually use!

Does your eyes go cross when you blink? Not hating, just kept noticing it and had to stop the video to ask

$90,000 over what period of time ?

What are your top selling items?

great information that I had never considered. thanks PLEASE PLEASE put shorts on the naked manakin. he is very distracting and I am not even _ay.

@UncleJessy

29 күн бұрын

😂🤣😂🙈

You dont include electricity ?

@AlexanderSmith600

29 күн бұрын

American electricity is cheap... in UK it's 30p (40 cents) per kWh so we have to include it....

@UncleJessy

29 күн бұрын

You included it when you calculate using 3DPrintforce website calculator

Have to be carful of the rights associated with printed items if you dont design the items yourself. They will ban the store.

90k$ in revenue or 90k$ in net profit? Come on man.

I put a lot of effort and money on ads and make less each month :(

Dang that’s crazy, what else would be crazy would be posting the Neptune 3 plus / max .6 orcaslicer profiles you’ve mentioned/promised for 3+ weeks for your patreon subscribers.

I agree with most items... But you have become large enough free equipment and filament make it much easier. Issue is majority of prints now is made from farms and dropshipped. ruins the small business as we cant keep up... secondly stay away from tiktok... Its a horrible place to sell and you get burned by people telling them it doesnt make it. or they never received money.

Tik Tok is banned in the US now.

@sinfullyunethical

11 күн бұрын

Not true, they have a year to “sell” it nothings happing with it currently

Sad thing is 99% of people selling 3D prints are selling designs that they have stolen and downloaded.

@UncleJessy

29 күн бұрын

I don’t know if it’s that high but for sure is still a problem and really really sucks

@rwilliams160

29 күн бұрын

82% percent of percentage statistics are made up on the spot

@anthonylong5870

29 күн бұрын

@@UncleJessy Agreed. Thnx for the response Jessy 🤙

You can’t make much, if any, money - if someone on youtube is broadcasting it. 🤷🏽‍♂️

Only 1 view... oh nevermind...

Pure plastic crap. Sand, finish and paint….be original instead of multi colored cereal box toys.

@NimVim

23 күн бұрын

He makes more than you do because he has to spend less time, dont be so bitter missy.

@PureMX33

23 күн бұрын

@@NimVim Learn to man up. Print worthwhile stuff

Will never understand 3d printing these junk toys adding more trash to the world's pollution scale. Useful prints yes. Multicoloured dragons nah.

@wafflecart

29 күн бұрын

It’s no different than kids toys or people buying figures or funko pops.. could argue in some cases if you sell locally it’s better for pollution to 3D print.

@UncleJessy

29 күн бұрын

Lots of people have kids & look for unique gifts, or some people just like fidget toys.

FedEx is god awful…

Don’t forget to undercut everyone’s prices 😂😂