Wow, this is making me want to get back into resin printing. This fixes 90% of the issues I had with using my Saturn 2. Thanks for the video!

@UncleJessy

Ай бұрын

No joke this takes away a lot of the headaches people have with it.

@theromeog

Ай бұрын

I am in the same boat - Have a S2 - Just preordered the S4U

@djngnear

Ай бұрын

Same here! Looks awesome

@Nightmarenightmarenightmare69

Ай бұрын

What problems did yall have. Been using my Saturn 2 since release and could not be happier

@VandalBee

Ай бұрын

Huge opportunity missed by not adding a heated vat. It would have been perfect...

It's been about 3 or 4 years since I've looked at resin printers (I landed on getting the Mars 2), and the leaps and bounds that the Saturn 4 has done at that price point is incredible. I am truly amazed.

It would be cool if you showed a more detailed guide of how you clean and postprocess your prints, since the whole tray can't fit into the wash and cure station.

@Anthonym_323

Ай бұрын

Look at his previous videos, he’s done a few already

@lanzer22

21 күн бұрын

My only hesitation is the build plate. If resin gets inside the hollow portion and the spring mechanism start getting stuck, having to take it apart and cleaning it will be a pain. This build plate is a great candidate for a magnetic build plate. Too bad they generally don't work well for large format printers.

@newmonengineering

20 күн бұрын

​@lanzer22 because of the plate design I think you can squeeze several strong magnets in between the plates and make it work. If you get strong enough magnets it will probably hold the metal plate, because the tilting bed will have way less suction resistance.. if anything you could probably design a plate with holes for magnets and glue them into a small thin retainer upper resin print. I plan on using my cnc and making an additional plate hopefully that will have some sunken magnets. Can't wait for them to ship it!

@lanzer22

19 күн бұрын

@@newmonengineering true that there will be less pull force on the plate. Will definitely experiment with different magnets to see what works. There is a lot of room above the plate for resin clearance so we can put some hefty magnets in there. Though cleaning in between resins would be nasty if I put too many magnets everywhere

This looks like the one to buy. The amount of fiddling and settings adjustments I've seen with these various printers has been what's been holding me back. Never underestimate the pull of something that 'just works'

Bed leveling has always been my main issue (that and resin spilling)😅 This is amazing and I'll definitely have to grab this printer! Uncle Jessy never disappoints with these videos!

I preordered mine and can't wait to get back into the hobby. Thanks for the info!

Yo Jessy! I Appreciate this video, man!

Saving money to order one of these soon. This looks amazing for the price range and features.

Definitely excited for the print settings from this one, as I do a TON of batch printing, and the faster that can happen the better.

@UncleJessy

Ай бұрын

A bunch of profiles going up today! Saturn 4 Ultra, Update to my Saturn 3 Ultra, a bunch of FDM Printer profile updates

@SADeviant

Ай бұрын

@@UncleJessy Did this ever go up? I grabbed your patreon just for these and they don't appear to be updated.

I got started resin printing with the original Saturn. Now I have a pair of Saturn 2 printers that have performed almost flawlessly. Looking forward to getting the Saturn 4 Ultra.

Really liked having the tilting vat in the Prusa SL1, glad to see it's in more affordable printers now

I am excited to see the resin tray has a pour spout corner. Such a simple yet significant addition.

Yes!! You're the ONLY person doing who's gonna be doing a video on the standard Saturn 4. It's kinda a bummer no one else is doing videos on the regular Saturn 4. I'm a bit worried about the tilting vat breaking and the cost that will incur so I opted for the regular Saturn 4 (and the green is so nice) and I just wanna know

@Atmatan_Kabbaher

11 күн бұрын

A quick search shows over 60 videos as old as 11 months. Did you even look?

@clanggedin

9 күн бұрын

@@Atmatan_Kabbaher Um. The Saturn 4 isn't even out yet bro. How could there be 60 videos on it and 11 months old? Did you even look?

@Atmatan_Kabbaher

9 күн бұрын

@@clanggedin Did you know that it is a common occurrence for companies to sell advertisers, such as KZreadrs, early launch versions of their products? It's as if you don't even know how the Internet works, champ...

Yet again you have created a great review.

I am new to 3D Resin printing. However, I've watched many videos on many different 3D resin printers. This is my top pick if I decide to purchase. Thank you.

I literally *just* sold my resin printer because I hated the mess, but if I hadn't already tried resin printing, this would definitely convince me to try it. *So* much easier than mine was... Except that you still have to deal with all the mess and fumes. I don't imagine they'll ever "fix" that, though.

@lanzer22

21 күн бұрын

Resin printing is definitely a "garage" hobby. I can't imagine doing it in the house.

Really interesting!! I'm still using my trusty original Saturn, would be interested in seeing a comparison between the 1 and 4, is it time to upgrade?

The speeds on this are insane and it doesn't look like much compared to the Saturn 3 Ultra, but as you said, when you consider this is using PFA film rather than ACF, you don't loose detail, so WOW! WOW! WOW! WOW!

@nobirdsnomasters

Ай бұрын

"fox hammer" lol. Jesse, say it like "foe".

@FauxHammer

Ай бұрын

@@nobirdsnomasters he knows, he's doing it on purpose!

@theromeog

Ай бұрын

@@FauxHammer We pronounce it as Dolphin not Porpoise - LUL

@ResinForge

Ай бұрын

😂😂

@GeekDetour

Ай бұрын

FoeHammer for the win 😂

Jessy, is tilting mechanism more reliable printing wise, overall, compared to traditional up and down printer ? could you get away with using less supports ?

What about screen protection? Included? Will it fit under the tilt?

The venom and skull look awesome I'm new to resin printing looking 4 my 1st printer was looking at a GKTWO but think this is a better choise thank you 👍

that was a pretty cool intro where it cycles through the different iterations

Two part question, Have you had a chance to test out a wham bam setup on this yet? And when first setting up im guessing dial the printer exposure as is, then readjust after adding the plate?

This looks awesome, maybe I should get into resin printing

Hey UJ, is there a video for the S3U vroom settings? I just upgraded from an S to a 4 Ultra and I'm intrigued about the vrooom settings, thanks!

I'm really curious how well the mini-heater add on works. Does it talk to the printer, so that the printer will turn it on/off and only start when at temp? How easy is installation? does it sit in the chamber with the vat like their carbon filter things? Or is it in the bottom under the screen?

Great vid! Thanks

So mSLA have finally catched up with the tilting VAT that Formlabs introduced on the Form 1 back in 2014! Nice to see some progress! 😄

Great video!!I have to say this is one simple to use resin printer! Pretty much just slice and print. Yeah, I might have overlooked where the drip tray was in the packaging 🤔. I might have had someone in this video help me locate it during my unboxing 😂

Hi there Clayton! OMG, I wish the Ultra had the green lid - it looks stunning! So much cooler! And…. bib bib bib! Yeah! I love the Bib 🤣 Please, forgive us who started bibbbing in your Live Stream - which always feel like a fun party to be in 🤷‍♂️ You’re the man!

Will the build plate fit into anycubic's Wash & Cure 3 Plus? A compatible wash & cure is essential for me!

Looking to buy a resin printer and have been waiting for the S4U to release and see some reviews and I gotta say I might finally take the plunge!

As a seller of models I was a bit iffy on the lower build height limit as I have a few models which are exceptionally tall. But hearing all of this this sounds like a brilliant addition to my fleet. Now if only I had more space.

Hi Jesse thanks for the review, can you share with us the VROOM settings for the Saturn 3 Ultra please? Thanks ❤

Jessy. The video was awesome. I've got 4 Saturn 2s and I might need to replace them with these. Do you have a contact at chitu that you could put an ear worm in? The lack of windows snap in chitubox makes me want to use lychee slicer over it

Love your videos, but Jessy, what resin are you using that you feel comfortable no mask? 😮

Okay uncle Jesse, so I've been debating between getting that one but in the cleaning kit what's the cleaner for the print after your done?

Vat tilt during print (and the bib) is a feature of the Prusa SL1S, surprised to see it here, wonder who owns the patent and if it was leased or if Prusa had kept it available for the industry.

Just got on your patreon to look at the Vroom settings you have for the Saturn 3 Ultra. Kinda suprised that you didn't have TSMC enabled. Is that something you looked at and just found that it wasn't faster?

Uncle Jessy have you tried the Uniformation resin printers by any chance?

what would i need to make the saturn 4 safe to use in my home in terms of ventilation?

Questions: Air Filtration of any kind? What is the Drip tray made out of? Thinking of how easy/hard that will be to clean over time. With the tilt feature seems like an issue could crop up for the FEP to fail and have resin leak into the printer, how easy is it to get into the printer itself to fix this?

Hey, I own a saturn and I am thinking about maybe upgrading to this, i just want to know if elegoo has a way I can allow them to resell my old printer so I don’t have to try to find a buyer to take the old one away or how can I get it to work?

If the settings for speed are no longer important, then how do you set up this printer in your slicer? Like lychee for instance? Does the printer ignores those settings and asks you to select fast mode or slow mode locally before every print?

So how do you clean the resin off the top of the build plate?

Hmmm a self leveling resin printer ??? Sounds awesome and the price looks just about my budget. My only question is does those mini heaters provide the required heat output to keep the resin at desired temps and since there are more moving parts is the build plate actually leveled every time ? Thanks for the review and your time.

Do you have control over updates ?

Crazy how quickly new machines are coming out. I bought the Saturn 2 around this time last year and that was the latest machine out - now it's deemed 'old'!

@UncleJessy

Ай бұрын

At this point every spring elegoo is releasing some form of an update to the Saturns

I have a Saturn 2 and really like it. I am not ready to upgrade as it works and I have other things I can spend $400 on. However after seeing this I was tempted. They addressed almost all my issues I had to overcome with the Saturn 2, short of making the build plate even bigger.

what do you think about this compared to the m7 recently announced?

Did you ever finish the magneto lifesize statue?

Ordered mine, can't wait for it to arrive. Should be a nice upgrade from my OG Saturn. What size is the vent circle in the back of the printer? I want to set up an exhaust system for it.

@jasonburnside3626

Ай бұрын

And that vent port is not built into the lid so no issues at all with detaching the hose. So nice!

@fluxcapacitor

Ай бұрын

I am in the exact same case and excitation state! I'm currently designing a custom exhaust system too. I managed to run a ⌀40mm PVC pipe vertically down the inside of the drywall of my workshop, as the air extraction unit happens to be located in the attic just vertically from this non-load-bearing wall. The pipe inlet emerges into the room next to where the printer will be, via a 90° elbow passing through a dummy socket cover. It connects through a custom iris shutter mechanism that I'm currently designing, that will allow me to control the amount of air being sucked in, or totally stop the extraction. I decided to use a cheap Chinese replica of a Dyson vacuum hose to connect the printer to this wall "air socket" due to the convenient quick release mechanism. I might add a small activated carbon filter (easy to replace) in order to keep the pipe and the extractor fan in the attic as clean as possible over time (I dunno it this is overkill or not? wrt resin VOCs). If I like the final setup, I'll share it on Printables :)

I think the tilting Vat is gonna solve so much with print release issues and I wouldn’t be surprised if it extends FEP life between replacements as well

i have pre order this printer, i'm so hype i want it right now to start my journey printing resin

@TheNataliaReyes

29 күн бұрын

How long will it take to arrive? I am considering pre-ordering it, but want to know if it will take long for it to arrive

@ronin942

29 күн бұрын

​@@TheNataliaReyes they said I will get it in June / July, but I receive a mail saying me that I'll have it before the 20 of June

wait u mean the same stl files are also printible with a resin printer instead of an fdm printer right ?

Are there any slicers that allow me to insert a PAUSE PRINT command on any layer I want so that I can switch resin colors mid-print? I hate having to sit there and wait for the correct layer to finish and then pause the print manually.

the space i have is very limited, but i really want a resin printer for my 3D models i make, but im wondering how bad are the fumes from a resin printer, like can i have it sitting in my bedroom and it will stink out the place with fumes or can i use it the same as a FDM printer with a little more clean up effort ?

If the FEP punctures, will the tilting vat cause resin to drip into the insides of the printer?

How’s the auto leveling? I recently bought the anycubic m5s and the auto leveling went out after only a month 😢

If the fep breaks mid print - what would happen with the resin and the tilting vat?

Hopefully you can still go in and adjust the speed, lift and lower settings in the slicer? Auto calibration is nice and all, but different resins and even different models can require different settings and you need to be able to adjust those on a print-by-print basis. Excited to see the power resume function. That actually seems like something new that Elegoo figured out on their own, instead of just copying the competition. I wonder if it would work better with the heater installed, so the resin isn't cooling while idle? There are questions though. What's with the plate design with the long standoffs allowing resin to pool on top of the plate in an inaccessible space? And a hollow build plate that collects liquid inside and drips it out at random, seems like a recipe for disaster. The portrait orientation touch screen? Why? And it's great that the error calibration detects cured resin floating in the vat but if it still ends up puncturing the FEP, it sounds like they need to calibrate that feature better.

best review so far!!!

Ordered our ultra via your link can't wait to print it. The camera does it work in a dark room amd still film in a time-lapse or do you need to get a light in the printer some how.

@TheNataliaReyes

29 күн бұрын

Did it tell you when you will receive it? I want to place my order but not sure when it will arrive, need it before July.

Hey do this printer work exactly like the. Saturn 4 not the ultra the one with the green cover

Have you yet tested the Heater please as key to my buying decision?

I currently own a Phrozen Sonic Mighty 8k. Is the Ultra worth the upgrade in print speed/quality?

solid looking printer. still a little concerned about leakage around the tilting bed though. Would love to see how that end of things foes long term Heck, even just how it survives a fep puncture

Do you think you'll review the new Anycubic M7 Pro when it launches?

Hi, tell me, I'm typing on Mars4 Ultra, Elegoo Rapid Standard Resin. what settings did you use, I ran into a problem, thin gaps and crevices float on the printed models and tests, somehow the resin does not have time to leak out and bake, I did not notice this in your video. I have already played with the settings and illumination, I set the parameter from 1.5 to 6, but the result is the same, I would appreciate it if you would answer which parameters you use. Thanks

Would the tilting vat also help reduce issues with suction cups? It seems like it would.

@UncleJessy

Ай бұрын

I believe it would since it’s peeling away vs lifting straight up

Does the printer come with a screen protector already installed?

Every new feature about this printer is an improvement on something that users had complained about with the Saturn 3 line. I'm so glad that Elegoo is not only listening to the feedback that they recieve, but also copying from competitors who are doing the things that printers love.

Is it able to hook up to the mars mate??

Commenting to support the video and the channel thank you for the update. I am still conflicted and thinking about waiting for something a little bit bigger be well be you

Does it need a air purifier? I have a big Dyson hot cold one with carbon and hepa but do I need more

Wish the Ultra had the Green Cover - it Looks like it would let more light in for timelapse videos.

I want to see that heater review before I decide if I want to get back into resin printing with this. My Saturn 2 broke me and I haven't looked at it in almost a year. But before I decide anything, I want to see if that heater works.

Please do the saturn 4 review soon 😭 Deciding which one to get and I like the color of the saturn 4 better

Nice printer morph effect man!

Sure glad I ordered mine day one release. I’ll be upgrading from my Saturn gen 1 😅 looking forward to more ultra videos!

I have the phenom l and I would like to know if it can be muted, it is super noisy.

WOW! These have come so far. Can you use magnetic build plates with this new design? Or, is this no longer 'necessary/super conveneint' for some other reason.

How many layers is the Hellboy bust?

The only question I have for you is what the different heights are for the various models. You give us time, but I want to know the realistic mm/h numbers

Is this considered a standard or mid size printer? For figurines? Not just busts??

Could you add a flex plate? Is that even a thing anymore?

Green cover kicks arse! (do not like the charcoal translucent at all) I wonder how much the green cover is.. or of you can order the 4 Ultra with a green cover? Definitely needs a heater!

Where did you get that Deadpool model behind you

STILL no built in heater 😐

Great video, bought one right after watching this video.Great pricing $399 for printer itself but I went for combo with the Mercury XS wash and cure stations for $579. Would have went for the combo with the air purifier but there was not a lot of information on the air purifier and as this is my first resin printer I need the wash and cure. Would love to see a video on the Air purifier and heater from you.

@TheNataliaReyes

29 күн бұрын

Did they give you a delivery date? I want to order one but am concerned with arrival time, need it before July

@xXPhanillaXx

29 күн бұрын

@@TheNataliaReyes Same told me June/July. They said they are coming by boat to the states and then will be sent by air to be delivered

As of 2024 what is the best resin printer with speed quality and size all in one?

I was super curious about this printer, i would love to have it but the overall size of it makes it difficult to have in my room space. As soon as i have space i Will consider it. Just what about the smells leaking of the shield? I'm in an apartment with other 3 people, and i would like to not have them on my throat as soon as i start printing ahahah i know it's much of a deal on the side of the resin you use, but as far as i know ther are no "smell free" option, and having it into my bedroom makes it even more of a problem.

Saturn 4 or Saturn ultra. I have poor WIFI so that's nothing something I care about and I don't care about time laps. I currently use a thermal ban on my Saturn 2 with the till is there enough room for it to till and come up with it on? Does the Saturn 4 also have auto level?

ive only ever done fdm printing, not resin. What does the optional heater block thing do for resin printing?

@dandurocher993

Ай бұрын

Resin needs to be a certain temperature so it flows freely in the vat. If you're printing in a cooler space like a garage or basement, the heater will keep the chamber temps consistent.

Thanks for the uploads. I'm building a resin farm to make miniatures for my shop. Which machine would you choose on a reliability standpoint? Does the Sarurn 4 Ultra stand up to the Uniformation GkTwo?

@bluelotuslandscapes

18 күн бұрын

GK2 is probably a better machine overall - heating, overall build quality, and reliability. But the cost per machine (esp with the higher res LCD) is multiple times the cost of a Saturn. For a one-off if money's not a concern then the GK2 wins hands down every day, but for a farm where you need multiple machines and are more dependent on the manufacturer's Customer Service and you want the devices at a lower price, the Saturn's a pretty compelling solution - assuming the tilting vat is durable, which is very much an open question right now. My biggest worry with investing in multiple Saturns for a business Print Farm, is if the tilt vat proves problematic, you'll be in strife.

You should make merch that says "Run off and Print!" 😄

I was looking into a new resin printer. This might just be the one. I'm still using the original mars and hope the new build room will allow more creativity

How does the heater get powered? From what I see no USB ports inside this. So guessing cable but they put hole in to run it out of printer?

@warwolf54

Ай бұрын

I believe it's battery powered

Does this print faster than the Elegoo Mars 4 DLP?

How does this compare the new Anycubic M7 pro? Both just released, both right around same price.

@petercallison5765

18 күн бұрын

M7 has heater and auto refill.