seems like the tush would benefit from being a little plumper on the bottom side

@ZackFreedman

3 жыл бұрын

This guy gets it

@johnnydingo8680

3 жыл бұрын

Perhaps a wider base ?

@yoshiodoom

3 жыл бұрын

@@ZackFreedman 11q111q

@buubised

3 жыл бұрын

i have some tush analogue thats connected to each other by some rollers (will fit narrow or wide roll)

@ActuatedGear

3 жыл бұрын

@@ZackFreedman Y'know, butt jokes asside, couldnt you turn that into a screwclamp kind of setup? Then you could fit that tush real tight and screw it till it sticks.

this guy always looks like he's about to tell me my power level.

@TheVirtualOz

3 жыл бұрын

Holy shit bro my sides

@jestexgarcia3601

2 жыл бұрын

ITS OVER 9,000!!!!

@danthebunnie_origins1146

2 жыл бұрын

Your Midi-chlorian count is off the charts!

@ChadClark63089

2 жыл бұрын

This made me laugh out loud in the real world

@wesleymays1931

Жыл бұрын

At least 7

At first I was scared when he chloroformed me, but then I was intrigued when he started talking about 3d printer things, and now I'm glad he took me home after knocking me out.

@Adi-vq2ek

3 жыл бұрын

Tush okay?

@ZacharyRPieMan

3 жыл бұрын

Lol, this comment is amazing

@GnappyAssassin

2 жыл бұрын

My legs don't look like that. There's a bit about systemic racism in Dave that I was reminded of.

2:02 "Unless you are in a wheelchair" That was a good one and caught me off guard, thank you for the laugh! (And maybe useful prints)

For the bolt sizer you could also add hex cutouts so you can super glue hex nuts into it to see what the exact threading is for that bolt (like a 10-32 vs 10-24)

@mrk8212

4 ай бұрын

are you done yet?

@drewlehman2456

4 ай бұрын

@@mrk8212 huh???

@theNoogler88

3 ай бұрын

That's clever, great idea

Ayy KZread recommend is getting better :), finally a new KZreadr who is relevant to my interests, and has amazing comedic taste.

@ZackFreedman

3 жыл бұрын

Aww, you're too kind. I'm just a dude trying to build cool stuff but making videos instead.

@dionysus7055

3 жыл бұрын

Brother you are telling me! This guy is great!

@ThiagoLaranjeiraZerooneBit

3 жыл бұрын

accurate

@awdhootkanawade

3 жыл бұрын

True this video poped on my feed

@tinkerjar396

3 жыл бұрын

Same here

The Prusa adaptation of the TUSH, used on the Prusa Mini, is far superior to the regular TUSH. It is very adjustable without falling over, and if you put non-slip foam pads on the bottom of the Prusa Mini spool holder, it does not slip on most surfaces.

'unless you're in a wheelchair' my god haha

@allclay1993

3 жыл бұрын

As a wheelchair user, that was hilarious to me.

@VigasanGunasegaranOfficial

2 жыл бұрын

Came here to say the same thing, literally laughed out loud to that

That Altoids eject button gave me Mac classic flashbacks, of getting hit square in the Adam's apple by an ejected floppy.

@ZackFreedman

3 жыл бұрын

The big kind or the small kind?

@Warhawk76

3 жыл бұрын

That was God's way of telling you to get a real computer 😉

@aerinjameson8336

3 жыл бұрын

@@Warhawk76 back then, a Mac WAS a real computer, then they started degenerating into new-age hipster garbage.

I've never been chloroformed and woken up to a forced education before. I prefer it to high school quite frankly.

@jakec2229

3 жыл бұрын

I dunno being woken up to a forced education describes the public school system pretty well these days. Although you gotta bring your own chloroform or else you need to talk to one of the creepy kids.

@ThePinkBinks

3 жыл бұрын

Jake C Hmm... true I guess. I just didn't notice any actual education going on at the one I was atacking as I didn't learn anything there. I did tons of studying outside in my own time but didn't learn anything from school. I love education, just not schools.

@breakfast7595

2 жыл бұрын

I mean, at least this is entertaining instead of just mind numbing.

I bought my first 3D printer two years ago. I have spent enough time watching KZread videos on 3D printing that Noah could have built the Arc twice. I have never ever seen or heard of you. You, sir are the most entertaining maker I have come across on KZread...HANDS DOWN! Love the humor, love the shooting, and your video editing. I think if you keep producing content of this caliber, you're going to grow to have a huge audience, keep up the great work, you have a GIFT! I'm looking forward to much more content! Bless you, brother!

@regenschein71

2 жыл бұрын

Well said. I totally agree. Which incidentally saves me the time to write praise like this myself. More time for printing, yay!

@zackt4551

2 жыл бұрын

No offense to this creator but Devin from the channel "Make Anything" is hands down the most entertaining and creative/inspiring maker on youtube. Check him out

I like the idea of the dremel storage tower but it is literally available, filled with dremel tools, and is only slightly more expensive than the raw plastic filament needed to print it.

@simonhoey6575

2 жыл бұрын

@@BlondieSL Is 30 hours considered a lot? Majority of my parts are between 10-20. Biggest ever was 139 (in 5 pieces). Maybe I have my detail set too high.

@justaguydoingguythings2762

Жыл бұрын

For about 15 bucks at walmart and 15 minutes there and back you can get all the dremel parts in a kit

@Hennysgarage

Жыл бұрын

@@justaguydoingguythings2762 walmart one definitely isnt that good

I freakin' love your description of the Dremel Bit Storage print!

@thomasjohannesen1003

3 жыл бұрын

"the sheer girth of my maker c*ck"

@kylehockley5011

3 жыл бұрын

That got the subscribe from me

Zack really spilled an assortment of bolts just for a 5 second clip. When it took him probably 5-10 mins to find and re sort them. That’s dedication right there. Respect ❤

"Just spread your tush to the appropriate width, get your spool up in there and start extruding" 😆😆😆

You are the coolest super nerd I have seen in a long time !! Deserving of a 3d printed trophy 🏆 👏 good luck on your channel. Very well composed

Dude, You are rocketing towards the top! Keep up the good production of video! Great description of the Monolithic Dremel tool holder!

That Dremel storage bin ROCKS! Two things it needs.. A hinged dust cover, and a holder for the dremel itself! :)

KZread algorithm on point! So glad I stumbled over here. I didn't realize how badly I needed hot nerdy talk delivered with comedic punchlines. Thanks.

Me: hears him say "Keter" Also me: a fellow intellectual, I see.

@ZackFreedman

3 жыл бұрын

█████ ███ ████ ███

@000Krim

3 жыл бұрын

Relatable

@conehead6499

3 жыл бұрын

@@ZackFreedman [REDACTED]

@dr.mystery5791

3 жыл бұрын

Scp 173 has breached containment

@gbrea6137

3 жыл бұрын

@@ZackFreedman btw it's pronounced key-terr

I really like the USB holder and the Altoids tin rack. Thanks for including the thingiverse links!

The Prusa Mini comes with a better version of the Tush in the package. It's the same idea but has two adjustable connectors inbetween to hold it together, as well as rubber pads.

Some of these will be very useful for me, thank you! I have a few lithium cells just laying around, so I'll definitely be putting them in an Altoids tin. I'm gonna have to give some thought to reorganizing my workspace after seeing that Altoids shelf!

I love the dremel bit holder. Makes me think I can wear out a 3D printer just organizing all of my tools

New to your channel, I feel like this is one of the most underrated channels on KZread. Also all ten were great but I really like number five for the 3-D printer been there before. Great video!

@ZackFreedman

3 жыл бұрын

Aww, shucks. I try to make the best videos I can, and I’m glad you enjoy them. I actually have two of those filament holders, one for large reels and one for small. They’re so useful.

6:08 I've actually printed this Tush before and I use it for my spools, however they keep getting knocked over with the slightest touch and it's really annoying so I designed a bracket that connects them together so they don't tip over and they're always the right width apart.

Jokes aside, two things that could improve the TUSH; A) make one side of the base taller than the other so it helps guide the filament spool. B) put Lego Technic axle mounts in it, so you can separate them and adjust distances using technic axles

Everyone of this amazes me. But those that don’t require screws, glue or any kind of fixations have a special place in my heart.

Why not add two features to the tush? 1 - grippable feet on the bottom of each tush so these don't slide around. 2 - a socket that allows a thick spoke to plug into the sides that is telescoping. This would perfectly space your tush feet apart to accommodate your spools.

I literally gasped and sat back in my chair when you dropped those screws. Most painful thing I've ever witnessed

I'm a science and robotics teacher from South Africa. Just stumbled onto your channel today and it is amazing. Your channel is awesome, informative and gave me so many ideas for my robotics classes.

Loll you earned yourself a new subscriber😂 love your content and your sense of humour. It's not very often that you find a youtuber who you share the same interests with, who is also entertaining at the same time. Keep up the good work!!💯

The first and second ones are going to be printed tonight, awesome video overall. Can’t wait to see what other videos you’ve made 😁

@ZackFreedman

3 жыл бұрын

That's awesome. After you're done, put pictures up on Thingiverse so the original creators can see that people are making their designs! It always feels good when someone posts a make of my projects.

@mysterytechknowledge3664

2 жыл бұрын

@@ZackFreedman New 3d Printer = New Thingiverse Account...Posting to commence shortly!

I stumbled across this channel and liked the humor from the start. Then I heard you casually say "keter class" and knew I had to subscribe 😅

@shawneecenicero8542

3 жыл бұрын

At first I was scared when he chloroformed me, but then I was intrigued when he started talking about 3d printer things, and now I'm glad he took me home after knocking me out.

@blackdeathghostye6654

3 жыл бұрын

I came to the comment section looking for this comment seeking fellow scp agents

I love tushies, they're the best! I swear, I could spend all day looking at those tushies work, and I wouldn't get tired! The only problem is that the bigger ones are harder to clean, so I would recommend sticking to a decent sized tush (avoid the small ones, they're too flat to be useful)

Great content, superbly presented, and made me chuckle :) You've got a new subscriber, and I'm adding a dremel bit storage to my print list. Thanks!

First time watching you, really loved your wit and enthusiasm!

yeah this is, by far, the funniest and most interesting "top 10 prints" video I've ever seen. I might actually use some of this stuff!! subscribed! can't wait for more.

I just got my first 3D printer yesterday, and I think I'm more excited about finding this channel now than I am about the printer.

with the prusa mini you get a tush like structure. only it uses two rails to connect the two sides together and with some screws you can tighen the hold so that it doesn`t move. it really nice

The Prusa Mini's spool holder is basically a TUSH with an adjustable cross-support. Would recommend!

@SkelyGeekin

3 жыл бұрын

I like adjustable Tuches 🥴

Loved this! You have really good humor and the intro really surprised me. Reminds me a bit of the modern rouges (that is a huge compliment ;))

@ZackFreedman

3 жыл бұрын

Thanks a lot! Glad you enjoyed the video.

I found some TUSH remixes that use fatter tracks for better stability and, best of all, trays in which to put them so they don't go flopping around. Thing #s 3353204 and 4262784, for the curious. Also, thank you for sharing the loose filament spool! Since the day it first arrived I have very much enjoyed my Maker Box subscription, except for the times where I load the little coils onto a spool by hand. I have this filament winding station that has made a truly awful task into merely a laborious and annoying task but I want to try this loose filament spool instead to see if I can print tangle-free and not spend billable hours winding by hand.

All good stuff man. Second or third video I have seen of yours and I will say you are putting out 10/10 content. Thanks again

I was actually thinking of designing a bit holder for my rotary tool, it's not a Dremel but it works for me and they sent it to me for a review video and I use it almost daily. But yeah, as I get more accessories I need a better way to store them.

@squidcaps4308

3 жыл бұрын

Do not print that massive holder, it really is abusing printing as a medium. The proper way to do is to print the intricate bits and then use wood or even rigid foam to construct the base. Printers are not replicators, you need to mix and match with different materials and methods.

@robotin3192

3 жыл бұрын

build your own robotic arm with parts for printing or machining. download parts and manufacture your own robot with precision and quality. access our hotmart link go.hotmart.com/I43664641H?dp=1

"Keter Class Secure Power Containment". Lol alright I like you.

@ElijahRhyne

2 жыл бұрын

That's when I knew this was a man of culture.

You should be at least nominated for an Oscar for best screenplay 👏👏👏 sublime 10/10

That dremmel tool holder is cool, but it could be more manageable to print by making it into connectable smaller modular prints that a user can add to as they get more accessories.

@ZackFreedman

3 жыл бұрын

So fun fact, I initially tried to split it into smaller panels, but Fusion 360 is so bad at importing STL’s that I just gave up and wasted half a roll of plastic.

I'm watching this but I don''t even have a 3D printer

@shaneluthy3041

13 күн бұрын

That's okay, everyone should have goals.

@mawi4112

3 күн бұрын

well then, save up 150€ and get a cheap chinese one

@Cyber_Gas

4 сағат бұрын

​@@mawi4112 yes like creality

I Started to print the gidfinity with magnets. I am having issues gluing them in and seems like it will take forever, please help with any tips and techniques you may have thanks love the design

I came expecting KNOWLEDGE and you delivered. The humor was effortlessly and professionally placed through the entire video and it had me laughing quite a bit. Fantastic video, I just subbed 👍

0:50 - This part is horrifying to watch. Forget stringing, this dude has spaghetti noodles on his prints.

@sloflo

3 жыл бұрын

@HeyNeonKABOOM! yeah no. It’s not. His print temp is too low or z axis is way off.

Almost didn't watch because top 10 is usually clickbait but you got the maker update seal so I am now subscribed.

@ZackFreedman

3 жыл бұрын

Aww, thanks! I just wanted to make TUSH jokes, the other nine are filler.

@mysterytechknowledge3664

2 жыл бұрын

@@ZackFreedman That's a lot of "FILLER" for your Tush!

About the screw sorting jigs, I suggest sticking a magnet on the underside. It will pick up the screws as well as sort them.

The version of the Tush I found on Thingiverse when I printed mine includes a toothed rack to hold the pieces in place.

I didn't think I was going to like this, but then I ended up liking this.

In the dremel part you had that "InfernoPlus - Hackerspace version" vibe

This content is great... love your sense of humor. Keep up the awesome job

Definitely used the Tush -- I just taped it to my control box on my CR-10S. Does great.

Great video, really enjoyed that, preferred your voice over the computer voice though. Subbed, nice to see a small 3D printing channel growing, keep the videos coming.

@ZackFreedman

3 жыл бұрын

That sounds like a robot voice, but it's actually Thomas the Train Heckler: kzread.info/dash/bejne/m4ieks6chravhrg.html

The TUSH problem could be solved by having little holes in the bottom of each to glue some strong magnets. Then you could just have a little metal plate on the surface to stick them to. That way you can have a stronger way to secure it without sacrificing the versatility of being able to place them where ever you want

@PutsOnSneakers

Жыл бұрын

No no no you dont want glue anywhere near a tush. the point of the tush is to have easy access to its use. You always want the oposite of glue around a tush, which is lube. lots of lube so that the tush can always be accomodating for its use. Some good high capacity penetration, I mean fillament pulling.

@paulreeder5241

Жыл бұрын

@@PutsOnSneakers Did you read his comment? "That way you can have a stronger way to secure it without sacrificing the versatility of being able to place them where ever you want."

@OmegaChu

5 ай бұрын

r/woooosh@@paulreeder5241

That Altoid boxes are wildly used as Keter class secure containers was one of the lesser known facts, now we know how! Thanks! My next project ASAP. Also the holder.

Subscibed, much due to your fun and entertainingly casual use of "lovecraftian hellscape" and "quixotic". Also your pace and editing; you don't waste our time.

Hey, there's a typo in the link to the Altoids Tin Selector Rack, might wanna fix that

@ZackFreedman

3 жыл бұрын

Good eye. What a bizarre typo. It's been fixed, thanks for letting me know.

@Fighter_Builder

3 жыл бұрын

@@ZackFreedman No problem!

Ah perfect, I needed something to load up my printers with today!

"This colossus of collets collates all..." hahah love the alliteration! xD

The Altoids ejector reminds me of Bond: 'Diamonds are Forever' scene where Bond ejects the cassette from the satellite control computer.

when he said "Just spread your tush," I did the exact opposite of feel that.

@Jmortonvids

3 жыл бұрын

LMAO!

I think you are the most eloquent youtuber I've ever seen 😂

@danielricardoaugustowood5840

2 жыл бұрын

Most eloquently crazy.

Oh man, I have been trying to place that music, Song of the Volga Boatmen, for ages. I was *so* stoked to finally figure it out thanks to this video!

The dremel is great and all but you should look into getting a flex shaft rotary tool. It had way more power and a foot pedal. Yeah its a little bit more cumbersome so it doesn't completely replace a dremel but for those larger projects its amazing.

@ZackFreedman

3 жыл бұрын

I actually have the flex adapter for the Dremel, but I really should get another pedal. I built my old one into a project and just never replaced it 😐

These are all really great projects. I have no doubt I would print them all if only I had a 3D printer.

@imthedentist

11 ай бұрын

200 bucks and you can have a good creality ender 3

1st vido of yours I saw and you earned my sub. you are hilarious.

I make a lot of 3D projects and I have many 3D printable projects that I have made. I might post them online but I like to show the creation of them through my videos first. At the moment I find a few of your picks interesting but could be improved lol. Nice video.

these bolt/screw dimension Jigs are nice.. could make them on a CNC mill as well.. as a matter of fact, in a lot of medical instrument sets with screws, there is one of these integrated in the tooltray.. i designed many of these..

Wow, you went to Target and survived the COVID apocalypse! Nice job! Love the video, liked and subbed!

The voice: "Number 3 the Tush" The screen: "NuMBeR 4"

My Prusa actually came with the TUSH as the only spool holder, it works pretty good.

Grande rincón 3D siempre fuiste mi favorito. Un abrazo crack

So this is where geekdom finally ends up? Impressive video on things I didn’t even know I needed. Time to wake up the printer. 👍🏻

@ZackFreedman

3 жыл бұрын

Why even HAVE a 3D printer if you're not gonna clutter your room up with quasi-useful gizmos?

Automatically trust a dude more if theyre a lefty Also as a lefty I use the Logitech g903, its an ambidextrous wireless mouse with a faster response time than most wired mice (it do be way too much money tho)

Her giggle at the Altoids keeper put me over the edge. 🤣

This video is hilarious, I've likely watched it 4 times in the last year and laugh every time! Zack's delivery is great!

"Hello hardware hackers!" **Smashes subscribe button**

@glennleader8880

3 жыл бұрын

No wonder the subscribe button is looking a bit battered!

Instead of snap fit, just use a nut and bolt. They're cheap, won't break, and easy to find. Sometimes it's best not to think too hard or over engineer.

@ZackFreedman

3 жыл бұрын

It's not how I would have designed it, that's for sure.

New sub and nice video. I have a question what material are you use for print. For me im new on this. For the moment already use petg but still not understand how to have a better printing. How many if the adecuate infil and how to made first layer and last layer more stronger

@ZackFreedman

3 жыл бұрын

Thanks for the sub! I love PETG and do most of my Nerf printing in it. I can only guess about your issues, but your problems could all be caused by low temperatures. Make sure you're printing at 230-240C, with an 85C bed. If you have drafts (cold breezes) in your printing room, try plugging gaps or putting a trash bag over your printer to keep the temperature stable. Most first-layer issues with PETG are caused by poor bed adhesion. I use the Prusa's PEI-coated steel plate, and I thoroughly scrub it with Windex (diluted ammonia window cleaner) before EVERY print. PETG also likes to build up on the nozzle. Make sure you heat your nozzle up and thoroughly wipe it down with a clean cloth before EVERY print. I generally use 15% gyroid infill. If you're having infill problems, try reducing your infill print movement speed and lowering your fan speed. PETG likes to "pillow" and make other defects on top layers. I'd recommend at least 6 top layers, regardless of layer height.

@Gusrango

3 жыл бұрын

@@ZackFreedman Thanks for your answer. The temp that already use are 244 and on the bed 80. Adhesion sometimes a i think have too much neer more case i can't take the piece out and need to reheat the bed again. For infil more of all case i use between 50 to 80 %. I don't if i making wrong. Also fan speed already setup to 50 % and the speed that i use are 25mm/s. yesterday i print a fan holder but i fill softly. I use the setting that are tell you but i use also infill i use 20 %. My printer is a JG MAKER magic 3D

Man, the script on that Dremel one was incredible! Thanks for all the good ideas! I'm currently printing drawer separators after realizing I can use my printer for actually sensible things.

2:02 Dude! I just spilt my coffee over my keyboard! :D

@3DJapan

3 жыл бұрын

You referring to the wheelchair? Those are often used by low budget filmmakers in place of a dolly. Lock the front wheels and it will roll smooth and straight.

I woke up not knowing what happened before. I could vaguely remember a guy asking me to smell a rag, don't know what happened after that. Also, for some reason I have one more subscription on KZread.

Hi, this looks great. Tell me in which program do you make models (draw, do calculations, schemes, etc.)?

Just found your channel and I love it. Keep up the great work

For RC hobbyist like me, that metric screw sizer saves a lot of annoyance and confusion.

@TroIIingThemSoftly

3 жыл бұрын

Yeah, I went straight for that screw sizer myself.

@pentachronic

3 жыл бұрын

Only problem is you need to calibrate the holes because PLA changes size on cooling!

@DargoDog

3 жыл бұрын

@@pentachronic I printed mine in PLA, didn't see too much deformation upon cooling. The sizer works really well, and there are no issue trying to figure out the screw sizes. With that, all of my screw sizes are at least 2mm apart.

@pentachronic

3 жыл бұрын

@@DargoDog Cool. Thanks for the info. Good to know. I've had tolerance issues when making threads so there definitely is some deviations from spec. It might be related to the volumetric size and on smaller dimensions is less significant ?

FYI: "USB cable holder by Philipp Kolb" has been removed

@ZackFreedman

3 жыл бұрын

Oh no! I’ll see what I can do.

@ZackFreedman

3 жыл бұрын

I fixed the link! I forgot to paste the last number of the item ID. It should work now! Thanks for the heads up!

it must be a joy asking you for directions, most animated person I've seen on the tube

The humor, the style, the content... i have to sub!

That was the slimmest tush I've ever seen.

@boingo696

3 жыл бұрын

So it would seem...

4:39 sounds like elements14 presents (electronics KZread channel) 🤣🤣🤣🤣🤣🤣

whaaaaa, i actually designed something like the tush myself like 4 years ago. works like a charm to, is a biiiit warped tho

It took me a rewatch but I remembered exactly that "What are you" scene for the screw jigs. Glad to see someone else is a fan of CR, specifically that episode where he covered the Ghostbusters RPG.

this guy is hilarious. Love it.