I literally bought this set Monday for 35$ I got both sets tbh for the main purpose of drilling to bricks so thank you for the video it couldn’t come at a better time since I’m going to be using my new drill bits this weekend.

Love the videos man keeping doing you, I really enjoy the energy. This is the energy this field needs.👍🏽

Bought the bits, and the drill, but didn’t like the Registration site. Called the help number, and he did a fine job, registering my drill, in Real English! Quite an impressive charger, two batteries, and a very strong case. All for $200.00. Thanks for introducing me to another tool, that I didn’t need, but wanted after seeing your video!

Edit the title .. Waste Your* Money .. I'm sorry to be that guy brotha but I want you guys to present yourselves the best way possible to the world bc your content is gold

@EthosArts

2 жыл бұрын

Appreciated.

@VCGConstruction

2 жыл бұрын

Edit made, thanks for the heads up Lou!

@K0NVICTx

2 жыл бұрын

Wayste you’re mony

@garycruz5910

2 жыл бұрын

It's only a waste if you don't need the tools

@martylucas8557

2 жыл бұрын

@@VCGConstruction, lol…actually Vince the change wasn’t made. What Lou forgot to do is italicize the word he was bringing to your attention that needs corrected, e.g. “your”, not you’re (you are). The title of the video should read, Tool accessories waste “your” money…

This could be a time saver when securing studs to concrete or brick walls/floors. You can drill through the metal or wood studs and directly into the surface behind them in one movement, then set the anchor and don't have to remove/replace the drill bit or have multiple drills set up.

Managed to get that Lowe's deal 3 pack flex bit and blades 91 bits 12 blades and 4 tool starter kit for $94. Even just the bits very happy with the quality so far

Ya know, this really makes me wonder. Milwaukee offers essentially the same carbide bits for multi material. They claim all of the same materials these do. The milwaukee bits have white painted flutes vs the black flutes on the flex. Milwaukee ALSO offers the same 4 pack of carbide bits with red painted flutes that are advertised for masonry and concrete only, even though they look the exact same as their white multi material bits. I would love to see if there’s any actual difference between those two types of Milwaukee carbide bits, and if there’s any difference between milwaukees bits and flex’s bits. They all look the exact same.

@gregorymandile2321

2 жыл бұрын

U saying Milwaukee copied. lol

@reginalb124

2 жыл бұрын

@@gregorymandile2321 they're probably all made in the same place.

@gregorymandile2321

2 жыл бұрын

@@reginalb124 no doubt

I may try these. They would benefit me greatly. I don’t drill very often, and I encounter various materials. These could last me a decade. Thank you.

That's pretty incredible. I still use my Bosch Daredevil multi purpose sets as they were the only ones still standing after drilling tile, but Id like to get my hands on a Flex set.

@histguy101

Жыл бұрын

Most of these brands have 3rd party manufactured accessories. Not Bosch, though. Bosch is good, and make good accessories, same with Freud/Diablo, most of which is Bosch painted red.

Awesome review! Excited to get these on the jobsite!

Thanks Vince and absolutely I'll be adding them. It's a no brainer

I thought the tile would kill it for sure. Can't really lie. They did the job and did it well. And the stackable boxes are kinda sweet if I do say so myself.

@FatLittleOldLady

Жыл бұрын

Yeah. I like them, too.

i love the stuff u review man

WOW! Gotta try!! Finally!

I'm glad u did this .wasn't sure if they were worth it.But now I know they r Thanks.I invested in Flex tools and I like every tool so far,so today i get a couple of bit sets.

Hell yeah, that looks great!

Flex is what is next!! Great video 👍

Great video can we see a battle royal against the different brand bits see which one is the best

Love the bits used them before your vid. I have not had a problem with them.

For nut setters the MALCO C-RHX is simply the very best available! Not only are they durable they are reversible with 2 different sizes in the same tool and the magnet is by far the easiest to clean debris from.

@richardgreen811

2 жыл бұрын

Malco is the best hands down. I haven't tried Klein's or dewalts version yet. Probably never will

@willieearles3151

Жыл бұрын

@@richardgreen811 “These are the best hands down, I haven’t tried the competition yet though” lol. I take your meaning, though.

@coltonmessex2877

Жыл бұрын

Longevity I have to agree with u on malco but it ain't perfect I use them installing hvac but if u get a taller head on a screw they start to wobble I keep going back to my flex 1/4 bit for those zip screws but I've used it so much its starting to round itself wear the malco never seems to if the malco was a tad bit deeper it would be perfect

10.08 I needed oil for my door hinges and tried to remember the very first brand of oil I remembered as a kid pre-WD 40. I could only remember 3 in 1. I am a firm believer the further back you go, the better, on oil. SO, the door that hadn't been used since probably 9 years before I moved in with my boyfriend in 2014 was almost completely covered in rust and I could not open and close it without bending the frame, but I got it loose with 3 in 1 and it functions as if nothing was ever wrong. Why the door was never used? Grow tent in the way. I took it down. That was super hard and it was so dusty and yuck! Yay!!!! So glad to see you using the old brand of oil. Made by the same company as WD 40, but imho better because no chance of over spray. I do love WD40, but I try to support old and new so I went with the oldest I could remember. So glad that grow tent is no longer blocking the door. I like these bits, too. I have no idea which brand is best, but I want a full set for fixing things around the house. Boyfriend delegated pretty much all tasks to me, except, what is too hard, we hire a super tall guy for 20 bucks an hour and give him 1 1/2 x that much when he does things super fast like he usually does and he did our gutters in 2 hours with only a machete saw and some other off purpose tools so he actually got up there and trimmed tree branches without us knowing, so that was worth it. Had I known he was going to do branches, I would have handed him my Ryobi pole saw, or reciprocating saw. It was especially good to see you using 3 in 1 because it confirmed to me that old is still a very good thing. Pro tip for disposing of old grow tents: cut them up into little pieces. I saved all the hardware because all hardware is expensive nowadays. I bleached what I saved and it was good as new. Now I can use that hardware for sewing projects. Man, I ain't kidding. That tent stunk so bad because at one point, cats were using the bathroom in it so I zipped it shut. The dust bunnies from being there since 2005 were massive. I almost puked dragging it out the door. :D

pretty sweet, thanks

I'd like to see the bit go up against drill bits designed for metal, tile, and concrete to see how it stacks for speed and longevity. I don't expect it to win in any field but it would answer the question, is it a jack of all materials. If so, it's worth my money Thanks to you and your team Vince for all the great content you guys put out.

Seems great.

They look great

Vince, On one of your videos, saw you put a plastic pencil sharpener in a drill and sharpen a pencil. I flipped out, I have never seen one of those. Where can I get 37 of these? Thanks

I am ordering some right now, those are impressive.

Carbide is a wonderful material. Stays sharp, runs relatively cool, super hard.

My pro press stopped crimping and need other parts to repair lights and vacuum etc

It would be great to see these same bits being used in different brand impact tools (Dewalt, Milwaukee, Bosch, & Makita). These are likely the tools your audience uses. I'd be willing to bet if we pick up these Flex brand bits, they're not being used in a 24v Flex impact driver. Consider the real-world application. Just a thought. Love the videos!

@boosted2.4_sky

2 жыл бұрын

I have the FLEX impact driver and hammer drill and I also bought the FLEX impact accessories kit...and use them..they're good...I mostly prefer DeWalt and Wiha bits though... but they work fine...

@TheSonofabiscuit

Жыл бұрын

I've been running Flex power tools and accessories on the job full time for over a year now. The battery power and life is outstanding and I've had no complaints, even the pricing is great. Every tool I buy comes with a battery too.

Amazon had Dewalt drill bit set for $9 had to grab a few great deal

Guess gonna have to check ‘em out to see for myself, not that your tests weren’t awesome. Just gotta be the feel ya know. Also, that laugh at the end, WHOA NOW, SLOW DOWN🤣🤣🤣 Cheers✌🏻

Impressive , pleasantly surprised

Awesome videos man. You seem to know a fair amount about the Flex platform. I am looking to switch platforms is there any chance the platform will be sold in Australia any time soon?

@VCGConstruction

Жыл бұрын

I honestly don’t know Ged, sorry

Can you help me find out where I get my Milwaukee tools repaired and serviced

My mind was blown just with the porcelain tile, its practically impossible to drill through that stuff lol

those drill bits are really good vince! and that for 25 dollars, i would definatlly buy them👊👊

C'mon Vince, you should have used Makita or Milwaukee impact driver for this. Now poor Todd at TRZ will think Flex bits only work with Flex tools... 😭😭😭

@VCGConstruction

2 жыл бұрын

Flint

I use these set of multi drill bits and I recommend to use and outside of house for putting up shutters because I use these for drilling in anchors for a pagola to anchor it to the ground it did not made it the second leg of the pagola the tip was gone when I was almost done with the second leg when I was drilling I use the ryobi brush drill the one that had the plastic handle through the drill that you see at Home Depot for 50 bucks it did a good job at doing it I was impressed that it did it. The hammer drill did get hot and had to give it a break after each leg was done and use the ryobi hp four mode impact driver to put on the anchors on the 2 setting on the impact it works wonderful and the brush hammer drill the hammer drill that was brush has 600 torque to drill into hard floor concrete that was outside and has tile on the floor tool since the drill bit broke I had Milwaukee and Bosch concrete bits which were incredible and lasted longer than flex bits did and the hex bit driver almost broke when I use it haveing trouble putting in anchors and the hex drive got rounded and had to use a makita hex drive that worked better to be I don’t recommend these bits sadly spend to much money on it like thirty dollars on it and it may not be worth it just get makita or Milwaukee or even dewalt bits and get Milwaukee concrete bits they work better and will last longer than these flex bits there tools may work great but some of there bits need work.

I’ll be liking those Flex bits and tools…..

Have you done this test with other companies like Milwaukee and Dewalt? Either way, that’s pretty impressive

The porcelain is the most impressive. Compared to diamond impregnated on a Dremel, this is very impressive.

@tensazero

2 жыл бұрын

Would have liked to seen multiple holes in the porcelain

I like that sir vince..

Love my flex drill-driver but I don't think I'll buy any other flex stuff vs milwaukee.

Hey man just buy Milwaukee tools! You will never waste money 🤗…but but but…Flex is coming out strong! I see their impact driver is pretty solid! So I might to try them soon. Thanks Vince!

Been looking for a new bit set to test Dewalt is still the best I've used Milwaukee's impact driver bits are garbage in durability since I do windows and sill openings

@brandonlee8400

2 жыл бұрын

I agree Dewalt, is the best I've used

@jacobcharters6614

2 жыл бұрын

@@brandonlee8400 milwaukee does make great power tools though i love my impact driver and drill from them but they need to work on their bits more

I make my own cinderbricks by mixing up the mortarcrete with a spaddle bit in my impact driver 🤯🤯

@VCGConstruction

2 жыл бұрын

Well that’s something you don’t hear every day, thanks Andrew

ill never understand why companies insist on making the most bulky boxes imaginable for bits when the whole set could fit in your fist lol. theres gotta be a better way to make it compact while still being easy to get to all the bits

@willieearles3151

Жыл бұрын

Bosch has a nice compact container for their multi material bits. It’s, like, a two inch wide piece of plastic with a long piece of clear plastic you can remove and then take out one of the bits. Nice and small but fits all five drill bits just fine.

Where do I buy this kit???

Maybe a longer test would have convinced me .

Достойные наборы 👏 Высылайте три штуки. Пока курс бакса нормальный 😁

that bit set is real nass like.

@VCGConstruction

2 жыл бұрын

What up Chris?!?!

I have never been so easily convinced that i needed to buy something

Those bits look cool, but I'll stick to using my makita xp, dewalt, Milwaukee bits.

@VCGConstruction

2 жыл бұрын

Fair enough SB!

@brandonlee8400

2 жыл бұрын

Makitas are nice, Milwaukee is okay at first, but my Dewalts last the longest

Never heard of this brand 🤔 Sold at Harbor Freight 🤷

@musictypefoundry7345

2 жыл бұрын

No, sold at Lowes

How to energize your mascot… do a bump of VCG up his snoot

It's healthy wen'ya no.2 stinks.. 🤣

Flex vs milwaukee, one handed recip saw battle?

Looks like they work well. But I question the durability over time

@zeuz4218

2 жыл бұрын

Unless u buy the product u won’t know

@yorselrus1996

2 жыл бұрын

@Mike Byrne i do agree but if you know how to sharpen them you'll be able to get a little more life out of them. If they have a super narrow fluke or a starter center drill, its very difficult and hardly worth sharpening

If you got all day to drill through tile or angle iron

I’m not real knowledgeable about stuff, so I have to ask why you wouldn’t test those bits on the masonry aspect with a hammer drill?

@VCGConstruction

2 жыл бұрын

You could, but a hammer drill isn’t necessary with these.

Man I can remember when all the KZread content creator/tool review channels hated on flex..... What happened? Yo talk to me Vince everything okay? haha jk brotha love the content keep at er!!! P.s flex is on the low tough as h***

Vince you should try the new metabo hpt bits

@VCGConstruction

2 жыл бұрын

What kind are they?

@brandonlee8400

2 жыл бұрын

@@VCGConstruction s2 alloy which isn't as hard as carbide but also less brittle. If you ain't breaking carbide bits then they'll last longer than s2

Cmon man I have 2 lines, Milwaukee and flex. The bits are good but not the best, Mikita gold and spider kill all other brands

Waste you are money... Your money

Vince my driver goes 260 yards. What about you?

@VCGConstruction

2 жыл бұрын

I’m more of chip and putter 🤣🤣

I would love to see these compare to other brands in that price range. Demoing a product without a comparison is useless. Seemed like it hard a hard time after the porcelain. I am guessing these were not as sharp after the demo.

@Zeeangelofdeath

6 ай бұрын

Well of course they weren’t as sharp as before the demo, what do you expect after porcelain. But it still went through the steel. What is there to compare. If you bought these you would know if you had to it could drill through anything. That’s is your comparison.

Tool accessories waste *I AM* money.

Test old hand tools versus new handles

@VCGConstruction

2 жыл бұрын

Which ones?

@markdatoolman9798

2 жыл бұрын

Screwdrivers, nut drivers ,hand saw ratchet screwdriver

For my money FLEX is lacking in the ergonomics department, it’s too soon to see how they are going to hold up under heavy use so I’m staying with Makita.

@VCGConstruction

2 жыл бұрын

Makita is ergonomically designed to fit the human hand. At least that’s what Makita says!

@andersonnettleship845

2 жыл бұрын

@@VCGConstruction they are, and by far the most reliable cordless tools that I’ve used

@ericweyker1067

2 жыл бұрын

@@VCGConstruction still waiting on kita to make a tool designed to fit my dog's paw so he can earn his keep.

I havent really been impressed with FLEX. No doubt they are a good but nothing that makes me want to be a diehard flex boy.

what a flex imao

Sponsored af!

Took way to long to drill through that angle iron😂. Don’t think I’ll be buying those any time soon

*your

$35 in my LOWES ! ! ! !

@tooltimewiththomas713

2 жыл бұрын

Buy the 4 pack of Milwaukee carbide multi material twist drill bits for $19 at Home Depot if you need MM carbide bits

@VCGConstruction

2 жыл бұрын

Dang Bob, what’s your location?

@SPMech1

2 жыл бұрын

@@VCGConstruction Looked it up at the Holmdel NJ Lowes

These videos would be better without all the shouting and random drilling tests. What exactly does two guys race drilling prove, and why do you think it requires so much shouting?