I stopped painting about 6 years ago but I painted for 28 years. I love your videos! Makes me almost want to start painting again!

@GarageNoise

Жыл бұрын

Awesome! That's very cool, thank's for sharing that. I appreciate the support!

Thanks for the video, top notch work as always. Merry Christmas

@GarageNoise

Жыл бұрын

Thank's so much, appreciate the support and Merry Christmas!

Nice job! Good luck with you!

@GarageNoise

Жыл бұрын

Thank's brother appreciate the support!

Merry Christmas Chris

@GarageNoise

Жыл бұрын

Merry Christmas!

A1 work as usual a big help for us DIY cheers have a merry Xmas & New Year from Phil in Australia.

@GarageNoise

Жыл бұрын

Thank's buddy, Merry Christmas to you! Appreciate the support!

@Snip59

Жыл бұрын

Stay safe and happy cheers love the work from Phil in Australia

Looks nice 👌

@GarageNoise

Жыл бұрын

Appreciate it!

Hey Chris, had me worry buddy, i sent you a message on TikTok since you didn't post a video... Glad your okay... Still Loving your work brother!

@GarageNoise

Жыл бұрын

Still here brother! I may miss one week here or there but never two. After Christmas I'll really start rollin with this channel .Appreciate the support!

would love to see your air supply setup!

@GarageNoise

Жыл бұрын

Ok ,can do

@joshrobertson2454

Жыл бұрын

Same

Thanks, for sharing that Chris hope you're well I have the same gun 🔫 mate kiwami 4 1.3 there do a kiwami WBX 1.3 and 1.4 for clear coat paint reckon Chris its a cracking gun 🔫

@GarageNoise

Жыл бұрын

Thank's for sharing, appreciate the comment and support!

@ANDY-we7mr

Жыл бұрын

As you know Chris i have the kiwami 4 1.3 I have heard nothing but amazing results and reviews on you tube mate there are a cracking gun i carnt wait to try mine out Chris there do a kiwami WBX 1.3 and a 1.4 for clear coat paint its got a gold air cap I have see the reviews on you tube Chris Cracking gun I have a PPS cup 🥤 system gekeo Chris when I went to spray something today the paint started to leak the plastic insert cup mate was pushed in and leaking Chris can you give me any advice on the 3m PPS cups when you put the lid on

@ANDY-we7mr

Жыл бұрын

@@GarageNoise chris I have a pps cup system and when I put the liner mate and the lid on chis it pushers the liner in side the cup causing it to leak any advice 😳

@GarageNoise

Жыл бұрын

@@ANDY-we7mr you might check the top of the hard cup that holds the liner may have some dried clear causing it. Other than that it's hard to say.

Is "flex agent" and/or "adhesive promoter needed when touching up a bumper cover like that?

Hey Chris! If you have enough pictures of work that fans sent to you, you could make a video from them. Happy Holidays!

@GarageNoise

Жыл бұрын

I haven't gat as many as you might think.

A little confused you mixed base and sprayed the rear quarter then went back to sealer for the bumper cover then back to base again?

@GarageNoise

Жыл бұрын

Yeah, That was just the way I edited it. I like to do it all in sequence for some reason I had to do that. It's funny you caught that tho. It definitely shows your paying attention! Awesome! I appreciate the support brother!

Looks really nice GN - nice work. I looked for the clear base in the description but couldn't locate it. What did you use for the wet bed?

@GarageNoise

Жыл бұрын

Appreciate it brother! I use nason binder but here's one that I'm testing now. amzn.to/3VOMY8i

@LakesideAutobody

Жыл бұрын

@@GarageNoise Thanks a lot - I'll check it out. Have a great end of the week my friend :)

@GarageNoise

Жыл бұрын

@@LakesideAutobody you too!

Do you let the wet bed flash before spraying the base?

@GarageNoise

Жыл бұрын

On a hot day no, I spray wet on wet but it works well if you let it flash as well.

What pressure range do you find works best for you with the Kiwami? Thanks!

@GarageNoise

11 ай бұрын

I like about 28 psi 2.5 turn out on fluid gan wide open

When you reduce your primer for sealer, do you use acetone as an reducer

@GarageNoise

Жыл бұрын

No basecoat urethane reducer and let me be clear you can't do this with just any primer only the upol primer in this video. Appreciate the comment!

What tip size on the Kiwami?

@GarageNoise

Жыл бұрын

It's a 1.3

Chris you never replied back to my message buddy I have the Gekko PPS paint cup system for some reason Chris when I push the filter cap lid on its pushing the plastic liner inside and leaking its happened about 4 times

@GarageNoise

Жыл бұрын

Gekko is that the same style I'm using?

@ANDY-we7mr

Жыл бұрын

@@GarageNoise chris I done ✔ some spray painting on a steel garden bench when I put the paint in the cup liner and lid on top it started to Leak paint from the liner inside the cup

@GarageNoise

Жыл бұрын

Well I don't know if that's the same style of pps I'm using but sometimes some paint can get on the housing lip and it prevents the liner from sealing. Other than that I don't know brother.

The panel which did not need repair u rubbed it down with wet & dry yes the panel above the quarter panel yes

@GarageNoise

Жыл бұрын

The roof rail that runs to the front was all sanded with 600 to prepare it for the new clear. I think that's what your asking. Appreciate the question and support!

I wish i could post photos on these comments

@GarageNoise

Жыл бұрын

You can email me at garagenoise247@gmail.com

@enforced_viper6066

Жыл бұрын

@@GarageNoisei sent a few photos of what ive spent a few days getting ready I will be repainting them when i go back on the 3rd

@enforced_viper6066

Жыл бұрын

I dont use guages on my guns i go by sound and material lay. I just ordered one for my primer gun tho