These videos are pure gold! Nice job!

@GarageNoise

Жыл бұрын

Thank's brother! Appreciate all the support!

@Gone_Rogue300

Жыл бұрын

And he actually replies back to his subscribers! He's not like tons of other KZreadrs that never take a second to reply! Plus his work is timeless! Def the best of the best!

@GarageNoise

Жыл бұрын

@@Gone_Rogue300 Thank's so much, I do everything I can to answer questions to help out appreciate all the support!

@ajcates9136

Жыл бұрын

@@Gone_Rogue300 dude always replies and take criticism like a boss you can’t get any better he is a ambassador for our industry

@markoojanpera8953

Жыл бұрын

Nice job and good paint gun. Even maybe better than my Iwata AZ4. Just planed to buy second gun. Devilbiss FLG-5, could be the one, but your video maybe change it to R500.

Another little trick when mixing paint is to zero out the mixing cup on a small scale and set the mode to Grams. So a 4:1 mixture would be, for example, 200 grams of paint, then add reducer till the total gram weight equals 250 grams. Doing it this way, you can use any amount of paint and easily calculate the ratio. Pour 392 grams of paint? 392/4 = 98. so add 98 grams of reducer till your total gram weight equals 490 grams. You can do this with any mixing ratio and any quantity of paint, from one ounce, to how ever much your cup can hold.

@GarageNoise

28 күн бұрын

Good tip!

Thanks for the vid mate. I'm planning on buying this gun and your instructions will definitely help me get started. Cheers.

Thank you! This answered so many garage questions!

@GarageNoise

Жыл бұрын

Awesome! Appreciate the support!

I have bought 2 of those guns , can't wait to try them .

That’s a really nice gun. I actually had that gun three times already.

Turned out flawless

@GarageNoise

Жыл бұрын

Thank's brother!

Thank you for your dedication to teaching us novices. I’m in the middle of a full restoration and enjoyed how you explained your finishing techniques and the quality of the gun and paint products.

@GarageNoise

2 ай бұрын

Excellent, appreciate the comment and support brother!

Excellent video! Purchased this gun. Can't wait to try it out.

@GarageNoise

Жыл бұрын

Awesome! Let me know how you like it!

There is some great detailed info in this video. Well done.

@GarageNoise

Жыл бұрын

Thank you! appreciate the support!

Great lesson !

@GarageNoise

Жыл бұрын

Thanks brother! Appreciate all the support!

This is awesome... exactly what gun I need for my little job... thanks

I’m going to order this gun for my diy project. Thanks for the informative videos.

@GarageNoise

Жыл бұрын

You can't go wrong! Appreciate the support!

Great video. This is the kind of thing to encourage me to get a gun and start practicing 😊

@GarageNoise

Жыл бұрын

👍Do it! It's very satisfying and a great skill to have.

I bought one to try it.. and it works great nice and even pattern thanks for the video.. nice job

@GarageNoise

Жыл бұрын

👍

Great looking paint job. I am glad Brian from Paint Society recommend your channel. Garage or big open shop painting is how I learned years ago. I am trying to get back to it and learn these modern guns. Our go to was the old Binks model 7.

@GarageNoise

9 ай бұрын

Lol, I remember the old binks guns. I never sprayed one but people would swear by them. Appreciate you checking out the channel! Brian's always supported the channel and a lot of creators in this niche.

Class is incession I watch your videos all the time keep up the good work 👍

@GarageNoise

Жыл бұрын

Awesome! I appreciate all the support and commenting it helps the channel!

Thank you so much for this video! I’ve been struggling with finding the right settings for this gun 👍

Appreciate the follow up with showing this gun putting down a drop coat. I'm sold. I don't have room for a large compressor but can definitely do a 20-30 gallon. Thank you!

@GarageNoise

Жыл бұрын

YW , appreciate the comment and support!

I bought one of the gun can't wait to try it out

@GarageNoise

9 ай бұрын

👍

Howdy from SW Oklahoma. I used this gun for the first time today based on your recommendation. Once I figured out I had a bad Harbor Freight Digital regulator and replaced it with my old 3M regulator it worked perfect for some base coat and satin clear on the backside of a couple fenders and a hood. Thanks for the great videos!!

@GarageNoise

Жыл бұрын

Awesome! I love this gun. I only recommend tools and products I use and believe in. I take it seriously, the last thing I want to do is recommend a bad product ot tool. Thanks for the feedback and the support!

Sometimes we can’t get these motor home rear caps unless we go salvage yard hunting and crate fees and shipping are into the 1500 range so we do things we have to do and as long as we stand behind our work our reputation stays good! Love your break down of the whole repair! Great job once again! Hope y’all had a great Christmas!! Ps I tape adjacent panels when I spray sealer I feel that trying to cover a haze line in my blend panels causing me to move my base too far into the blend panels. Everything else you did beautiful

Hi Chris, new subscriber here from the UK, I'm a DIY/Hobby painter doing my thing in my workshop with a homemade booth setup in the corner of my little workshop. Have to say there was some really good info in your video the base went down really flat with that gun and the Upol clearcoat looks really glassy, the Upol clear is not the easiest clear to use so you did an amazing job with it, I'll be watching more of your videos🙏👏👍John UK

@GarageNoise

Жыл бұрын

Appreciate the comment and support brother! Welcome to the channel and community!!

Thanks for the video. I bought a Vevor R500 to paint Jet Ski parts. Your video helped greatly for setting up the gun.

Excellent video

Great Gun, I bought these when they 1st came out for only $35 . They also have different tip sizes, 1.3 1.7 2.0 But at that price got 4 guns 1 primer base ,clear, and Flakes

That is a beautiful paint job!

@GarageNoise

11 ай бұрын

Thank you! Cheers!

I've been watching your vids for 5 days now and that R500 gun is da bomb. Got my first one today and another one on the way for clearcoat only. Followed all your instructions testing the gun and BAM BAM BAM like I've been painting all my life, and i'm old in my 60's. So pat yourself on the back, give yourself a pay raise, whatever, just do it!🤪🤪🤪

@GarageNoise

2 ай бұрын

Awesome! That's good to hear! Appreciate the support brother. There's alot of satisfaction in painting you own project for sure.

Thanks for the great video. I'm going to try the R500 gun on my next project

@GarageNoise

Жыл бұрын

It's a great value gun for sure!

Amazing little gun.

@GarageNoise

Жыл бұрын

👍

Excellent video. I just ordered my spray gun👍

@GarageNoise

Жыл бұрын

Awesome!

Good video 📹 very well explained thanks for sharing that Chris

@GarageNoise

Жыл бұрын

Glad you enjoyed it, appreciate the support brother!

Great lesson thank you

@GarageNoise

Жыл бұрын

Thank's brother appreciate the support!

Great job!!

@GarageNoise

Жыл бұрын

🙏👍👊

I ordered the gun today can’t wait to get it and use it Thanks Ron

@GarageNoise

Жыл бұрын

👍

@LdsJorge

4 ай бұрын

The link was for a 1.3 Tip which I didn’t notice until after I bought it. Do we need the other Tips and if so how do I buy them or should I buy the Gun with 3 tips and return this 1.3 Tip Gun?

I like how you blend the color !

@GarageNoise

Жыл бұрын

Thank's brother!

Thank's allways helpfull.Good painting .

@GarageNoise

11 ай бұрын

My pleasure 😊

Awesome video Chris. Happy New Year and God Bless.

@GarageNoise

Жыл бұрын

Thank's brother!

Great work always good job

@GarageNoise

8 ай бұрын

Appreciate that

Chris, Just wanted to drop you a quick line to tell you my first paint job went “well”. There is a slight possibility I have a few little runs, and maybe even a sag or two, but I’ve decided to leave it alone and use it as a great learning experience. See, another good this about your videos, I could identify how I screwed up, and what to do to not do it again. I can’t tell you how much I really appreciated your assistance in answering my questions and giving me great tutorials prior to me attempting this project. Once I roll it out and get all the stuff back on it I’ll send you a picture. Again, Thank you so much for everything. YOU ARE THE MAN!!

i have 2 of these that i use to spray water based finishes on cabinetry. really like the gun. easy to clean and use. plus at $90 CDN way cheaper than a fuji HVLP at $1500 good video with lots of information

@GarageNoise

Жыл бұрын

Awesome! Appreciate the feedback on your experience.

I am new to painting so this video is very helpful. Pretty work 👍 I am going to try this paint gun.

@GarageNoise

Жыл бұрын

Awesome! That's what I like to hear. Let me know if you have questions. Appreciate your comment and support!

@1patriotman973

Жыл бұрын

@@GarageNoise I will Thank you

Hot damn that looks 1000% better than the factory peel most cars come with. Nice

@GarageNoise

11 ай бұрын

👊👍

That turned out good sir!

@GarageNoise

Ай бұрын

Thank you!

Very informative. One thing that I always do is filter whatever I'm spraying before dumping in spray gun.

@GarageNoise

9 ай бұрын

Yeah, that a very good idea!

Exelent excellent work! The result is phenomenal, much like spending 35,000 Greens on a paint booth! 👌🏼

@GarageNoise

Жыл бұрын

Appreciate the support!

@ANDY-we7mr

Жыл бұрын

@@GarageNoise chris can you do a video 📹 please on the Gerko PPS paint cup system mines been leaking about 6 times when I insert the liner

Awesome videos

@GarageNoise

Жыл бұрын

Thank's brother! Appreciate the support!

You done a great job , nice gun

@GarageNoise

10 ай бұрын

👍

Looks great…

@GarageNoise

Жыл бұрын

👍Appreciate the support!

I have noticed one thing you do that many will overlook, GN - you max-out on consumables. No other YT channel uses close to the amount of various consumables you do - you have serious bucks into your basic equipment level, you have so many consumables to hand it is incredible - and also totally smart - I swear daily I will stock up on the silly little stuff that makes all the difference to the outcome of a job, but usually forget/wuss out - you don't, hence the success of your projects. You don't use a booth, but boy you do use ALL the stuff that makes painting work - which cancels out the "no booth" thing - kudos on being able to do/being disciplined enough to do that., big respect. People overlook just how much having all the correct materials runs to - a testament to how you're doing business right.

@chrishart2064

Жыл бұрын

You laid that clear down nicely. Also its nice to see a KZread painter who understands that you can’t spray to the edge of each panel (because the edge can’t hold as much paint). You should always spray at least a few inches beyond the panel edge so when you hit the next panel your overlap isn’t on the edge where it will run easily. I see so many people on these videos that spray each panel separately. I’ve been painting for 45 years and I’m always surprised to see how many people don’t understand this technique. ( and yes I know if you’re very careful you can get away with the edge to edge method, but why risk it when there’s no benefit to it?)Keep up the good video’s! 16:56

Looks great man, I'm in to painting now my dad used to paint cars that's why. Great videos keep the good work another subscriber here

@GarageNoise

2 ай бұрын

Awesome! My Dad got me into cars as well. It's a great career or a fun hobby. Welcome to the community brother!

Like the way you check the lid is correctly sealed, small thing but so important.

@GarageNoise

7 ай бұрын

👍

Nice job❤😊

@GarageNoise

Жыл бұрын

Thank's brother!

Nice job.

@GarageNoise

Жыл бұрын

👍appreciate the comment and support!

nice job!

@GarageNoise

Жыл бұрын

🙏👍

I’ve painted probably a dozen cars with this gun. And its baby sister the 33000. Easy to maintain, and sprays really well. A little heavier than the pro guns. I will buy another for sure. Great video btw with a lot of valuable tips and tricks. Thanks man

@GarageNoise

4 ай бұрын

Yeah it's a really solid gun. Appreciate the comment and support brother

This looks like it would work great for guitars as well! gonna have to give this gun a whirl

@GarageNoise

Жыл бұрын

I'm sure it would. Appreciate your comment and support!

Gorgeous 🔥🔥🔥🔥🙏

@GarageNoise

2 ай бұрын

Thank you! Cheers!

A1 as good as it gets as they say never blame the tools .

@GarageNoise

Жыл бұрын

Thank's brother!

Really good finish and I use a gun very similar if not the same gun

@GarageNoise

Жыл бұрын

Thank's brother! Appreciate the comment and support!

Thank you your video 👍👍👍❤

@GarageNoise

5 ай бұрын

Welcome 😊

I purchased on used it yesterday great results u can also buy the tip kit for it I sprayed flake out it so far so good

@GarageNoise

Ай бұрын

Thanks for sharing

New subscriber to your channel. Awesome videos. Thank you.

@GarageNoise

9 ай бұрын

Thanks for the sub!

Good tips on how to use the Spray-it👍With documented paint savings I should be using it more for those cheap jobs where I only have a pint or half pint of paint for a repair area. Totally unrelated, but I just bought and hooked up 50 foot of Flexilla hose and a Flexilla leader with a swivel. My opinion, Very nice flexible, cold resistant air line perfect for DIY/home-based business. Amazon purchase.

@GarageNoise

Жыл бұрын

Thanks brother, appreciate it. I have one of those flexzilla air lines had no idea it was cold resistant.

@BearBudgetTurbine

Жыл бұрын

@@GarageNoise what they claim. Some kind of composite material. They have a promo burying it in the snow w other hoses. I guess it stays 'flexxy" My garage gets plenty cold when i'm not in it, so seemed like a good choice.

I just got one of those R500. It is a match to my eastwood gun. The only difference that I could find is that the knobs on the R500 are aluminum where the eastwood feels like it is made of better material. Time will tell how the threads on the volume knob hold up with taking the gun apart to clean. Another great video, thanks again.

@GarageNoise

Жыл бұрын

Rong Peng is the manufacturer of this gun they produce it for others to rebrand. I like the looks and finish of the lt 100 better. Appreciate your comment and support brother!

@sheldoncooper6230

Жыл бұрын

New subscriber to your channel. Great video. Are you using the 1.3 tip that comes with the gun for the primer, paint, and clear coat or do you need to change for each product?

@dennish9519

Жыл бұрын

@@sheldoncooper6230 I use the 1.3 for everything, well except the filler primer. I found that the filler primer was a little too thick for the 1.3 so I used a 1.7.

good job ....👍

@GarageNoise

Жыл бұрын

Thank's brother!

I do have one of these, speed is one thing I do best, it's ok for small repairs but for bigger jobs I like a better covering gun just have to remember when painting or clearing witch gun im using !

@GarageNoise

8 ай бұрын

👍

I have the same gun I love it. Works better than my $600 GUN.

@GarageNoise

Жыл бұрын

It's painful to say but I tend to agree with you. Appreciate the comment and support!

Nice to see Chris your using the PPS cup system mines started to leak 7 times there going to send me a free box out that what I do Chris lift it out off the cup 🥤 and check it 😀 good idea that 👍

@GarageNoise

Жыл бұрын

👍

Good job man, white is hard to spray. I appreciate the review of the gun.

@GarageNoise

8 ай бұрын

Thank you! Appreciate the comment and support!

Good job buddy

@GarageNoise

Жыл бұрын

Thanks 👍

@adolfosanchez3938

Жыл бұрын

@Garage Noise Hi buddy can send you massage at the noon I need you help?

@adolfosanchez3938

Жыл бұрын

@Garage Noise I send you an email thank you for your time

I am new to your Channel. I would love to learn how to paint and the way you illustrate and tell how to do things I have learned a lot already.

@GarageNoise

7 ай бұрын

Awesome! Love to hear it, and welcome to the community. Let me know any questions you have.

@markcasavechia1249

7 ай бұрын

Will do, thanks.🙂

Bought the same gun with 4 nozzles from Ali Express, $70 shipped to the US. Shipping time 2 weeks.

Love your channel. I started out painting in 75 but somehow 25yrs ago I started metal works and now it's all big wrecks. Since I started watching your channel my home shop is backup and running and producing paint work again. My r500 lplv just came today can't wait to try it. What cup system are you using and thanx for the inspiration

@GarageNoise

Жыл бұрын

Thank's brother appreciate it!

Hi Chris, Great video Buddy. I did something I have never done and ordered the gun directly from China, ALIBABA Express. The spray gun comes with 4 tips and I ordered the adapter with cups. The entire order cost $100 including shipping. It will take 3 weeks to arrive as it has to go through customs. As they say buyer beware but I will let you know when it arrives. I have 4 steel rims to paint so that will be my first test with the spray gun. Early Feb. and temp dependent too. Been cold here in CO.

@GarageNoise

Жыл бұрын

I've always wanted to order from Alinaba they have some great deals on frame equipment but uneasy about it. A inexpensive paint gun is a good test. I never wanted to wait for the shipping tho. Let me know how it goes. Appreciate the comment and support brother!

@Danno74Z

Жыл бұрын

@@GarageNoise You bet Chris! I have to say so far ALIBABA Express has sent me daily updates on where my order is. Not a black hole. But I will keep you informed. Feb. 5th is when it should arrive at my house.

@kilroy776

Жыл бұрын

@@Danno74Z Im curious , was the AliBabba version as good??

My garage rule is low overspray so i'm selling all my guns that fog it up. Turbine is lowest overspray, but if using a compressor, I want that gun that can run at lower pressure, minimize fog, and atomize well. R500 is capable of that. Can paint with a 21 gallon as well. Still runs a lot, but does pretty well.

@GarageNoise

2 ай бұрын

👍

This gun works great for spot jobs, because it uses less air and less material, it takes longer to spray coats. I like to spray fast, I have a high volume low pressure spray gun.

@GarageNoise

Жыл бұрын

Thank's for sharing, appreciate the support brother!

Hello, Subscribed!!

@GarageNoise

Жыл бұрын

Appreciate the support!

I've ordered , I'm painting a GM Herron white 2pack no clear

@GarageNoise

Ай бұрын

Awesome!

Wow, the paint and finish looks wonderful. I’m going to have to try that gun out.

@GarageNoise

Жыл бұрын

You won't be disappointed! Appreciate your support!

Like your videos i have the aero pro gun

@GarageNoise

11 ай бұрын

Awesome! Appreciate the support!

OK, took your advice and ordered an R500. Just did my first clear coat with the 1.3 and I must say it sprayed beyond my expectations. It sprayed as well as my old Binks #7, which used to be the standard for us old-timey types back in the 80's. For you youngsters out there, if you've never shot a high pressure gun, it's the standard by which all else is judged. But...overspray is a serious problem. You haven't seen overspray until you use one. Any they are heavy.

@GarageNoise

11 ай бұрын

For sure those older guns blasted it on like a fire hose🤣🤣 This gun sprays so nice alot of things to like about it.

@davemcaferty6347

7 ай бұрын

I'm looking for a spray gun to spray candy apple paint. Do you think this gun would work well for that, and if so, what psi would I run it at

@jeffreylonigro1382

7 ай бұрын

@@davemcaferty6347 Here's my $.02...this is probably paint heresy but... I don't really pay much attention to PSI. I pattern the gun before every shoot meaning I adjust the psi and the spray...but I don't have a gauge on the gun. I just see how it patterns on cardboard and how it looks when I hold the gun perpendicular to a light source. Then I pay close attention to how the the paint is laying down on the surface. That requires good lighting. And no matter how good the gun, you are not going to do as good a job on the first paint job as the tenth. You have to get to know your equipment.

@beest921

6 ай бұрын

I still have my Binks #7, I'll never part with it lol. But I haven't used it since the mid 90s.

@MarineScoutSniper

6 ай бұрын

SATA is the Vanguard now.

Great video. I just bought a R500 LVLP gun which I'll use to paint my 66 Mustang. Never done this before so these videos definitely help...Thanks. Question - is there an upper end time limit for letting coats flash off?

@GarageNoise

Жыл бұрын

Basecoat flashtimes are typically around 24hrs but I personally wouldn't wait past a couple hour. Check your manufacturer's technical data sheet. Clearcoat needs to be more precise about 10 mins if you wait too long you can get dye back or loss of gloss. If you coat too quickly solvent pops. Some clears are more temperamental than others. Appreciate the comment and support!

i just picked up this gun today on amazon prime with three tops for $59.

@GarageNoise

11 ай бұрын

👍

@67cudaksa34

11 ай бұрын

@@GarageNoise what adapter for the one time paint cups?

Great video. You make it look easy. Question, what gun do you use for primer gun. Thanks for sharing your knowledge.

@GarageNoise

Жыл бұрын

I use the 3m performance or the 3m accuspray with a 1.4 or 1.6 tip. Mainly because it's simple to clean. Appreciate the comment and support!

Watching closely and learning a lot... For starters with my compressor it would seem that a LVLP gun would be the best for what I have in mind... my o/h has a nice little Miata Mk1... which desperately needs a new paint job. A mechanic friend is giving me access to his spare bay and I'm going to give it a go myself... the paint is so faded in poor condition even if I put it on with a roller (joke) it would be an improvement.

@GarageNoise

Жыл бұрын

Awesome! Happy to help. Appreciate the comment and support brother!

Great video as usual! What adapter do you us for the Savito cups?

@GarageNoise

Жыл бұрын

I got mine at harbor freight. I can't find it online but it's a 3/8 female adapter. Hope this helps appreciate the support!

I have and love my R500. I am naturally a slow painter. Thank you for over view ofR500. Question: I put some small spots of bondo on a panel with a spray can of primer over bondo. Can I use urethane paint over the primer or do I reprime with a two part primer? Thank you for your knowledge and expertise!

@GarageNoise

Жыл бұрын

I wouldn't take the chance Robert. I'd san of the 1k and reprimer with 2k. Appreciate the support!

I learnt a lot from this channel. But I was wondering what type of respirator filters do you use.

@GarageNoise

Жыл бұрын

Disposable 3m

You can get an adapter to run the harbor freight disposable cup liner kit in this gun. I’m not sure how it compares to the savito kit, but it’s another cheap option.

Everything looks good on white color, please try on black

@GarageNoise

9 ай бұрын

Several videos on the channel paint black. Appreciate your comment and!

Chris when you going to do a video 📹 mate on the PPS CUP SYSTEM

1.3 for all primer bases and clear Chris is that what your saying? Ps fab videos your content and real info are great that's what home garage guys want 🙋

@GarageNoise

Жыл бұрын

1.3 for primer can be small . For primer I use a 1.4 or 1.6 with the 3m performance gun. For sealer ,base and clear 1.3 is fine.

Just found this channel. Love this video and subscribed! I bought 2 sprayit guns last year and am planning to paint my hood in the garage when the weather is warmer. Whats your opinion on the O'Reillys paint that youre using compared to more expensive brands?

@GarageNoise

Жыл бұрын

Awesome! Welcome to the community! I really like the nason xl, better coverage than standard nason. Better color match than some more expensive brands. Appreciate the comment and thanks for the support!

awesome video great help. where did you get the adaptor to use the cup system you have in the video

@GarageNoise

8 ай бұрын

Harbor freight spectrum #57505

I recently bought the version of this gun that comes with three nozzle sizes. I can't wait to try it out shooting primer on my Belair. Hello from Tulsa. Also do you use any of the Roberlo products from Coops?

@GarageNoise

Жыл бұрын

I have, I used alot of the me1 primer I like it. I switched to the upol primer tho. Most of the bodyfiller I've tried I haven't sprayed the clearcoat. I like their tape as well I'm always testing different products. Appreciate the support!

Would be good to see you do this with a different colour that shows the fan pattern better and how smooth it lays down e.g. red gloss

@GarageNoise

Жыл бұрын

Check out the channel I did a red bumper with this gun. Appreciate the comment and support!

@finleyk

Жыл бұрын

@Garage Noise yes I've seen that video but it doesn't actually show you spraying colour on a primed surface, you only showed spraying red on a red prepped surface so its hard to tell the fan size and coverage.

@GarageNoise

Жыл бұрын

@@finleyk ok, next time I'll demonstrate fan size it's about 10 inches

Nice work! Are you using a slow activator? I missed that

Love you this video. Very helpful for the guys like me who is starting to do some DIY projects. Question, what air compressor is best for this gun?

@GarageNoise

10 ай бұрын

Bigger the better, most cfm's you can afford at the least 6-10 cfm's

@UwU._Sqb

10 ай бұрын

@@GarageNoise unfortunately i have a husky 20gallom compressor which gives 4-5 CFM

@GarageNoise

10 ай бұрын

@@UwU._Sqb it will work but you'll have air fluctuations if you paint more than one panel.

@UwU._Sqb

10 ай бұрын

@@GarageNoise ill keep that in mind.. thanks for The tip.

Got my R500 and a mini gun 1.0 on their way £70.00 inc. postage from Poland , will run fine off my 50ltr silent compressor ,i normally only do 3/4 panels at a time, use a ANI 160 at the moment. Nice job.

@GarageNoise

Жыл бұрын

I think you'll dig it, thanks for the support!

@leerevell5998

Жыл бұрын

Me too just ordered my gun from Poland