I never realized how simple this timing system actually is. Thank you for this information. I can do mine with confidence now.

@dannyjohnsonsgarage

Жыл бұрын

I’m glad you enjoyed the video. It’s only difficult on the 32V when degreeing cams.

@ZFighters7

8 ай бұрын

Have you seen the timing system for a ls

@tylerross3847

6 ай бұрын

This is "simple" ?? Lmao, this is a 600-step process and basically every single thing in the engine bay has to be moved or removed. Unless you do this for a living, Idk anyone who would call this "simple".

now that's what i call a detailed video taking everything apart then all back together , excellent job explaining so simplified for us diy people

I sort of remembered doing this on my Town Car and my F250 in 2014. I now have an older F150 that needs to be worked on. I thoroughly enjoyed your video with your detailed explanations as well as tools you had/used to make the project easier. You're well spoken, easy to understand, and no annoying music to get in the way. This was, by far, the best video for anyone to watch who plans to undertake this repair. It was very educational.

@dannyjohnsonsgarage

8 ай бұрын

Thanks for the kind words. Thats my goal and I’m glad it’s being useful for others.

I love Danny Johnson’s videos man so informative any back yard mechanics can do it I fully rebuilt my 01 mustang gt form engine to gas tank because of this guys tutorials thank you so much your videos are greatly appreciated!

Found your channel about a week ago and I've watched just about every video on the 2v. Picked up another subscriber. Thanks for the great video on how to do this job without going insane. Will attempt this job soon.

Schwinn needs to make those chains like they used to make them in the 50s and 60s. Love those guides made out of cheap plastic. I used to think timing belts were junk, but look at all of the vehicles now with chains that need to be replaced and all of the labor it takes. Those chains look like they belong on a Schwinn BIKE !

I've been putting off doing this job, but now that this perfectly detailed and clear video is here, I'm ordering parts and will do it as soon as they arrive. Thanks man.

@cliffc8177

2 жыл бұрын

And you can sue youtube if he explained it wrong so no risk for u

@Logistican518

Жыл бұрын

Did it work? I posted here 2mths ago and still haven't started the tensioner removal. Feel like I'm going to miss something

Awesome video, thank you! I do everything myself on my vehicles, but this one had me on the fence. Not as hard as I imagined it to be!

You are the MAN for sharing this! You made this job so much easier Bro, THANK YOU! Great video!

@dannyjohnsonsgarage

4 күн бұрын

I sure wish I had a guide when I did it, so I’m happy to help out. Great job taking it on yourself 👍🏼

I appreciate your help. Wouldn’t have gone it done without you, thank you.

Wow, this is really detailed. I have a timing cover leak, but I think I'll go ahead and attempt to replace the timing components as well. Thank you for posting.

I don't even own a 4.6 but it was a great saturday evening watch, now I will look for cheap gts on marketplace needing this job done. haha

Another great video, thanks!! I'll be retiring in twenty months, at which time, I plan on starting to rehab my 2001 Bullitt that I bought new in Sept. 2001. I'm now watching these types of vids to see what I'll be getting myself into. I've got a little over 135,000 miles on her, so this is one of the first jobs I want to do along with a new oil pump and water pump at the same time for peace of mind and continuous reliability. Keep the SN95 vids coming!!

@dannyjohnsonsgarage

2 жыл бұрын

Congrats on upcoming retirement, and that’s super awesome you are a Bullitt original owner. You may have seen my brother’s supercharged Bullitt on the channel

@dannyjohnsonsgarage

2 жыл бұрын

Here is the playlist for all the repair videos too if it helps you find them better Mustang Maintenance and repair kzread.info/head/PLIjr-uSYDZi7hBrphoRniyYjb707PpPTu

This is a GREAT Video!!! Nice at breaking it all down step by step, easily understood.

This is an amazingly detailed and helpful walk-through video, thank you! Seems like this job is a bit too complex for me, but at least I knew before I started 😅

I have a 05 Ford crown Victoria. 4.6. I think i have a timing chain issue so im gonna have to go in there and take a look. Watching this video really helps. Thanks

nice work. great video. clean and to the point. one of the best video I've seen.

Great video - thanks! Helped me remove and replace the timing cover on my 03 Marauder. I subscribed!

Great vid! Lots of good commentary and tips. Well done! 😀 I'm doing a 2010 4.6L 3V, so slightly different, but this is good info.

Great video, thanks. I suggest changing the oil pump and the timing cover lip seal while in there

If you do a timing on the 5.4 3 vale always use the CAST IRON tensoners, The old cast iron will work better than the plastic.

Thanks for this video... really helped me!

That is an excellent video! Thank you!

This also applies to the ford f150 timing chain? You convinced me to do it since I have it sitting not knowing how to do it and the tools I need.

I have a question i put my timing marks just like this but when i put the front timing cover and harmonic balancer the tdc was not lined up with the notch on the balancer and cover?

Odds are failure happened because of a weak oil pump. Change it while you are this deep. Great video.(my next adventure in my 01 Vicky)

@5.43v

2 ай бұрын

Odds are the failure happened because plastic breaks and longer chains means more stretch

Great job thank u I have a 04 3.9L V6 just here learning

@dannyjohnsonsgarage

3 ай бұрын

The v6 will be a but different as a pushrod engine. It will have one chain from the camshaft to the crankshaft

@michaelcastaneda4135

3 ай бұрын

@@dannyjohnsonsgarage awesome following the order you disassembled really put the motor in perspective appreciate it 😀

01 Vicky Did timing and oil pump. Ford Performance pump Cloyes timing kit I heard that typical chain noise and drove it 3 days taking it easy on it. Parked it and then proceeded to do the work. Lined everything up and can get about 300* of total rotation. No matter how I work around it. Nothing broke in the old parts to cause valve to slap the piston. It actually ran good, just that typical noise. I've taken the new pump off thinking it may be defective and tried rotating again, same result. It always hits at the same location also. I'm stumped. Any help is greatly appreciated. I'm also really close on sending her to a shop to get it figured out.

A long process but definitely seems easy enough for me to handle over the weekend. While I'm doing the timing and have it this torn apart is there anything else that you recommend or suggest replacing while im at it?

@dannyjohnsonsgarage

Жыл бұрын

The oil pump is a good idea. You’ll see it in this video kzread.info/dash/bejne/gIhpvJeFYtqno9Y.html

You made it look so easy

@dannyjohnsonsgarage

10 ай бұрын

Hopefully its easier than no video

A lot of work. Keeping from messing up the timing is the nerve racking part but so is getting all the stuff reassembled. Your video makes it look fairly easy and straightforward but obviously time consuming. I don't know if I'm going to attempt to do this or hire someone. I think I have a timing chain issue because my scan tool is showing the timing wandering a bit at idle. If it is a timing belt issue then I'm disappointed since I only have 75,000 miles on my 02 GT. I just replaced the alternator and fuel pump so I guess I'm going to start having other issues.

that upper radiator hose would piss me off lol. nice to see the job isnt that bad

It's funny how they had bolt holes on the older harmonic balancer but deleted them for at least my 2010 5.4L 3V, so I had to make a harmonic balancer holder with a cheater bar using a pinion flange tool and a few bolts to hold the spokes of the balancer steady while I torqued the bolt. I had to use 2 four foot bars to loosen the bolt. There's no way bump starting the engine would have loosened it, but I had thoughts to try that initially. I just knew this one would be stuck pretty well.

Sounds great..nice video

Great video. I’m in process of finishing a head gasket replacement on a 2010 4.6 2v . I replace all of the timing components except for the gears. I lined the crank and timing gears up with the links on the chains and installed the new guides and tensioners. After roasting the engine around 10 complete rotations the dots and links do not line up. Occasionally the links and dot will all line up about 2 links off so it appears the cams and crank are in sink. Do you know about how many revaluations the motor has to turn for everything to line up or did I do something wrong? Thanks

@dannyjohnsonsgarage

Жыл бұрын

Yeah, it will not line up perfectly for something like 32 full rotations.

Gonna try this on my 02 Crown Vic PI

Great video! Doing some guide replacements on a 4.6 4v. Do you happen to know if there is a cam holding tool for a dohc 4.6l? Thanks !

@dannyjohnsonsgarage

2 жыл бұрын

There is, but like the ones I used it does not specifically say which mustang, so you'll want to confirm they actually fit amzn.to/3HhIUYC

Just subscribed this is wonderful

Back in my MoCanIt days all we had was a book and photos, we called these Talkie's

Great video

Nice job

So at 27:18 did you also loosen the cam holder on the driver side? I got a little confused there

@dannyjohnsonsgarage

2 жыл бұрын

Only as needed. With new chains you may need to as the old ones have stretched. When you install the new chains that will be more tight it may require you to slightly loosen driver side to get the chains where they need to be dot to dot

Does anyone know if there is a gasket that is supposed to go behind tensioners? Looks like a mating surface but no gaskets came with it. i already put the whole car together but in fear of putting timing cover back on and trying the start because i want to know if i am missing gaskets.

2002 Explorer. A slight screeching sound under accel. 2days later misfire code. B4 shutting off it began to seemingly "rock" forward / backwards under accel. Suspect timing. Current: timing & valve covers off. Found partially broken guides. Left chain loose. Cam sprockets appear in proper position along w/ gear mark. No dots on chains. Question: at this point how can I tell if I'm out of timing? I have the crank and cam holding tools. I'm at TDC. Main Question: can I place cam tool and proceed with timing component replacement without worrying about getting out of timing? this is the best video I've seen thus far

I see that you're very knowledgeable on the new edges. Definitely earned a subscribe from me. My 02 mustang gt has been having tough turning where the wheel will not return back. No squealing sounds so I dont believe it is the power steering. Do you think it could be the steering rack? I recently had my lower control arms, struts and inner/outer tire rods replaced, but it didn't fix that issue. Id love your thoughts. Awesome vids btw.

@dannyjohnsonsgarage

Жыл бұрын

I would inspect the steering shaft and it’s rubber bushing and then maybe look into the steering rack. Lift the front wheels into the air and place it securely on Jack stands and see how it turns without load. It very well could be a worn steering rack like you say

@Jokes4u

Жыл бұрын

@@dannyjohnsonsgarage So if it turns pretty easily, then it is probably the steering shaft? I know they added new bushings on when they changed out the control arms. Thanks for the reply.

How long do these typically last? I have some sort of rattle at 2krpm on my 4v. Only apparent in higher gears. Goes away before or after that rpm. Wondering if this might be the issue.

@dannyjohnsonsgarage

Жыл бұрын

They should last 200k miles or more, but the tensioner arm as you saw in the video was broken through by the tensioner

Well done, great video. Very thorough explanation and awesome camera work. Did you change the crank seal? Didn't catch that. Can it be done with the cover on?

well done thanks

question… with the harmonic balencer bolt 32:43 how did you get the bolt off? i had it all off then put the bolt back in so i could turn the engine just put it in without the harmonic balancer. so how do i take this bolt out?

@dannyjohnsonsgarage

7 ай бұрын

Put the car back in gear if it’s a manual transmission. If it’s an auto you’ll need to use an impact wrench or take the starter out and use a flywheel holding tool

Hey Danny awesome video great job...My 04 GT snapped the guides at 3500 rpms... Still starts and idles really ruff. You think theres any valve damaged or is just because it's out of time??? Thanks in advance

@dannyjohnsonsgarage

Жыл бұрын

Once you remove the timing cover you’ll have to see if the timing dots are still lined up. If they are off by quite a bit it’s possible that the valves has been bent, but you would most likely hear that.

@juanvega802

Жыл бұрын

@@dannyjohnsonsgarage thanks for the advice I will check that

Hey Danny. I’m doing the chains , tensioners and guides on my 2002 GT and I had two questions. I know the PS Pump has to be lowered to get the front cover off but can you get it off without dropping the AC compressor? And I have the Cloyes kit with steel tensioners but they didn’t provide gaskets. Are there gaskets that are supposed to be used for the tensioners to the engine block or just metal to metal ?

@dannyjohnsonsgarage

2 жыл бұрын

It’s best to drop the ac compressor as well as the power steering, just as the video shows. It also helps to drop the ac to get the crank position sensor out. I don’t believe there are any gaskets for the tensioners

@2vcrew782

2 жыл бұрын

@@dannyjohnsonsgarage Thanks! Appreciate your detailed videos and the time you put in to help everyone

@2vcrew782

2 жыл бұрын

@@dannyjohnsonsgarage I got it all apart and cam tools locked in place. I got sooo lucky I decided to tear it down at the first noise I noticed. Just one piece broke off the right hand bank chain guide at the top of the guide where the bolt goes through, it fell to the bottom of the cover and wedged between the oil pan but didn’t go in. It was the only piece that broke off, so all broken parts accounted for 👍

@shyruff7383

Жыл бұрын

@@dannyjohnsonsgarage hey great video ,I’m almost done with my timing chain problem thanks to you. But I have one question while I’m in the mist of doing it.. when you line that lil notch on the crank pulley to the top stop like you said, when I took off the pulley ,and I watched it as it came out it stayed there but the silver notch when you take off the pulley lines with the 10 degrees

@shyruff7383

Жыл бұрын

Is it suppose to that way Or my eyes playing tricks on me

I Love you man👍

What about the the gasket in the middle of the timing cover

Hey man I did this job today on my 2011 Crown Victoria P7B but ran into an issue. I've asked about 100 people online and everyone is telling me something different, so I thought I'd ask the expert directly. I replaced the chains, guides and tensioners with Melling parts. The driver's side chain lined up perfectly dot-to-dot. The passenger side is off 1 link. I know you mentioned you had to do take off the holding tool & adjust the cam, but many people are urging me not to do it - and say if it's not lining up then something is wrong. The other issue is I don't have a friend or anyone who can help, so I'd have to do it myself. I know you had your bro to assist. I would really appreciate your input. Thank you sir

@dannyjohnsonsgarage

7 ай бұрын

With new tight chains it’s necessary as I did to adjust it. That’s my opinion. I would try loosening the cam holding tool just enough that you can gently turn the cam with the wrench to have it move to where it needs. Be very careful not to bend the cam tube or have it go loose and spring back. Otherwise find someone. Even the missionaries from the church of Jesus Christ of ladder day saints can come help hold it. Once done, rotate it and make sure no valves touch. It’s normal to have some slack build and release so don’t get concerned when you see the slack do that as you turn the crank. If it’s a problem, turn the crank backwards if the bolt won’t loosen to get it back where it belongs. Dot your dot is how it should work in my opinion

@christianlawrence881

7 ай бұрын

@@dannyjohnsonsgarage giggled @ ladder day lol. this is exactly the response I needed - you sir are a legend. thank you

@user-cp2mt6bp8n

7 ай бұрын

did you do it?@@christianlawrence881

hey man great video - I'm about to do this job for the first time on my 2011 Crown Vic Police Interceptor. I watched a ton of videos and many say once you lock the cams with the cam locking tool to not rotate them again with the chain off, or it could mess up the timing. but then most videos end up rotating them slightly with the tool off, to line up the chain properly? little confused by this

@dannyjohnsonsgarage

10 ай бұрын

You can carefully loosen the holding tool and slightly move the cam back or forward with the 18mm wrench on the end of the cam gear like it shows in this video to line up the dot, but only a link or two total movement. The reason why is because some pistons are at or near top dead center and you don’t want them to contact. You’ll want a strong grip pm the wrench with a second person to help line it up

@dannyjohnsonsgarage

10 ай бұрын

You can carefully loosen the holding tool and slightly move the cam back or forward with the 18mm wrench on the end of the cam gear like it shows in this video to line up the dot, but only a link or two total movement. The reason why is because some pistons are at or near top dead center and you don’t want them to contact. You’ll want a strong grip pm the wrench with a second person to help line it up. Just don’t let the holding tool loose and have the cam spring back to its neutral position and strike a valve (some pistons will be at top dead center

Great video!

Can you please explain why you have to loosen all oil pan bolts? It seems like you can just take out the bolts connecting the oil pan and the timing cover and then remove the timing cover.

@dannyjohnsonsgarage

3 ай бұрын

You can avoid the oil pan bolts, just be careful with the gasket from the oil pan to the timing cover as you pry it away and use some RTV on the bottom of the timing cover where it meets the oil pan

hey im rebuilding my 2v and im doing the timing chains aswell but leaving the old cam sprockets, do i still set the chains the same way you did black link to dot or is there extra steps to make sure they’re in time?

@dannyjohnsonsgarage

Жыл бұрын

Set it dot to dot like in the video. I only did new chains tensioners and guides

@deltadetrix

Жыл бұрын

@@dannyjohnsonsgarage Thank you i was worried the new crank may make things different but i guess im just overthinking it lol

you are an amazing teacher. i have a 05 p71 and i think mt timing chain is rattling in there

@dannyjohnsonsgarage

6 ай бұрын

For the 3V it may be the cam phasers on the end of the cams

@al-mubdizahir8704

6 ай бұрын

so will the timing chain kit solve this?@@dannyjohnsonsgarage

@dannyjohnsonsgarage

6 ай бұрын

@@al-mubdizahir8704 not unless the kit comes with new cam phasers. It’s a good time to upgrade the tensioners and chain, but some people have worked on a technique to lock the chain and change out the phasers without removing the timing chain and all the parts involved. You’ll have to find some videos on the wedge tool they use

Well done. Any thoughts on changing the gears also?

@dannyjohnsonsgarage

Жыл бұрын

Unless they are damaged, I would leave them (that’s my take and what I did).

So I am assuming that if you’re also replacing the sprockets and setting the crank to TDC, you wouldn’t have to make your own marks? Just line up the marks on the new sprockets and chains.

@dannyjohnsonsgarage

2 жыл бұрын

Correct. I only made marks to verify when I laid the chains out that they were actually at the ends of each chain. It’s always good to mark it since removing tensioners and such (should the holding tool skip) you’d know which link belonged on the dot

I got a 2002 Towncar...I'm getting the Red Light Oil Lamp turn ON and engine struggles only during DRIVE at a Red Light. Its fine during Park/Neutral/Reverse. Accelerates Superb

@dannyjohnsonsgarage

Жыл бұрын

If the car is struggling at stop lights it may be losing rpm and this losing oil pressure so it thinks there is a problem.

@ge0ne063

Жыл бұрын

@@dannyjohnsonsgarage how would it lose RPMs?

@thenegus5469

28 күн бұрын

@@ge0ne063might be idle air control valve

Question for a beginner. Does this apply to the 2001 4.6l 2v expedition? Sorry if it's a stupid question

@dannyjohnsonsgarage

11 ай бұрын

Yes. It should be nearly identical with minor differences. If you follow the same procedures you shouldn’t have a problem

The slight rattle I'm hearing under my hood tells me I need to at least replace a tensioner. As long as I'm doing that I might as well replace everything. Do you have any experience with Trick Flow's timing kit?

@dannyjohnsonsgarage

Жыл бұрын

I haven’t used their kit before so I can’t say. This one has been good so far for cloyes

@johngregory4801

Жыл бұрын

@@dannyjohnsonsgarage Thank you. I have a stethoscope coming Monday to see if the rattle is coming from under the timing cover. I'm a woodworker with little experience with working on cars. I've got a 2000 Marquis Grande. So far I've installed a TF upper plenum and CHE rear control arms on my Marq, then helped the mechanic friend who's watching over me to make sure I don't f up install a new intake manifold, new rear control arms and brakes on all four corners of his 2000 Crown Vic So far, so good.

what if i have an ac delete pulley installed, can i leave that there or do the bolts need to come out?

@dannyjohnsonsgarage

29 күн бұрын

You’ll have to see if any bolts go into the timing cover and if it can be removed around the pulley.

So I’m doing this job and go to take the power steering pump off and figured out someone has done something like this before because the bolt that was behind the line is completely missing. Now I’m gonna have to find a replacement bolt and take the line off just to put a bolt in

I need to do this to my 04 Mustang, GT, automatic dark shadow gray with 192,000 miles and she still running good

@dannyjohnsonsgarage

15 күн бұрын

You will want to buy the crankshaft holding tool and remove the starter to put it in place since the automatic will simply spin even in park when you try to remove the crankshaft bolt

I have a '99 Expedition w/ a 5.4 engine. Do you know if I can leave out the chain guide for the right side of the engine? It sits above the chain. I have the rail that goes on the tensioner, of course.

@dannyjohnsonsgarage

Жыл бұрын

It will need the tensioner and the tensioner arm guide when it is operating and there is oil pressure in the engine or it will have too much slack without it. So it will need all the components that came with

@renejacques8288

Жыл бұрын

@@dannyjohnsonsgarage I know it'll need the tensioner and the tensioner control arm. I was referring to the guide that has no tensioner on it. The bolt hole on the cylinder head for the the guide stripped, and I was wondering if I could just leave that guide off. Thanks for your reply.

How many of the longer guide bolts did you have to buy

@dannyjohnsonsgarage

5 ай бұрын

Just one in my experience.

They are sold out on Amazon for the Ford Racing M-6004-462V Camshaft Drive Kit for 4.6L 2V Engine any other Links where I may be able to find this part. ?

@dannyjohnsonsgarage

10 ай бұрын

I would look at this one amzn.to/3KZQqKP

How did you remove the drivers side head cover? Mine is blocked by the master cylinder in the back. Any advice would be helpful

@dannyjohnsonsgarage

Күн бұрын

To get it over the cam caps it’s easiest to lift it straight up instead of tilting the front up and get it over the the cams that way

Hey Danny ,great video thanks - I have a 4.6 in my 2003 f150 - same motor and procedure ?? Thanks man

@dannyjohnsonsgarage

9 ай бұрын

Yes, you will have minor differences in some of the parts, but the process will be the same.

@jeffreyeiford2750

9 ай бұрын

Great -wish you lived close to me to watch over my shoulder - lol Thinking about doing this to her -236000 miles

Will this timing chain work on my 1999 4.6l lincoln towncar

@dannyjohnsonsgarage

Жыл бұрын

Yes, it should be the same

How much does fuel pump tool cost

Would you mind giving me a time estimation for this job? I have a 04 Ford Explorer and I'm hoping that the valves aren't bent but it has broken the cover from the timing chain slapping it. Is there any advice I can get on that situation?

@dannyjohnsonsgarage

Жыл бұрын

If the engine is still running and not making other horrible noises (other than the chain slapping around) its possible the chain has not skipped a tooth and no valves were bent. It's hard to say. This job will take you about 8 hours to complete, but the time estimate is difficult because I don't know if you have all the tools, parts, or other things that might hold you up.

@tydoyle7752

Жыл бұрын

@@dannyjohnsonsgarage I plan on saving to get everything so I can do it all at once but I am making a list of everything I need. The motor doesn't run and won't turn over anymore according to the owner. The starter would make a whining sound as if it's trying to turn it over but it can't. That's what worries me that it could have bent valves. The owner was driving it down the road and it started slowing down and she would press the gas and it would slow down more. She tried to crank it until the battery went dead and then called the tow truck, he tried a jump pack and it wouldn't turn over.

@dannyjohnsonsgarage

Жыл бұрын

@@tydoyle7752 Good luck. I hope its not ruined. Make sure to get the cam holding tools in the video description. Very helpful to keep them from moving.

How do you crank an automatic to get the fuel flowing without starting the car?

@dannyjohnsonsgarage

Ай бұрын

The same way, it should crank and not start if the accelerator pedal is pushed to the floor while cranking when turning the key. That’s the factory way to clear a flooded engine

I moved the crank a bit to line up the up the passenger

@dannyjohnsonsgarage

9 ай бұрын

It should be fine to move either to like up the dots to the master links, as long as both sides are correct when it’s all done.

@delwinortiz4815

9 ай бұрын

@@dannyjohnsonsgarage okay thank you and yea I got all the marks lined up.

How can i put my car in TDC if i already took the tensioners and guides off and the camshafts are being held by a special holding tool so they wont spin and the pistons hit the valves on my 2002 mercury grand marquis 4.6 2v v8? Before i took everything apart i had put it to TDC and now the marked links wont wont align right on the marked spots on the sprockets and i made sure i spun the crank till it was a TDC any help please!?

@dannyjohnsonsgarage

Жыл бұрын

If the cams are indeed held in place where they should be, line the chains up to the top cam gear dots, then line the chains other master link up to the dot on the cam gear. You can move the crank slightly back and forth to line it up to the master link, and if necessary as I did in the video, you may need to slightly loosen the cam holding tools for them to line up to the perfect spot. The crank dot should be 6 o’clock and that leaves the crank key way line at about 11 o’clock

@kevinenriquez706

Жыл бұрын

@@dannyjohnsonsgarage do the cams move inward or outward ? if only you had a video because im having trouble i shouldve been done days ago

@michaelbrooks2741

Жыл бұрын

I did the samething

What would be the recommend mileage to have this done I own a 2011 Ford crown Vic with 138k on it and it's starting to tick on startup

@dannyjohnsonsgarage

Жыл бұрын

That’s a good milage to do this on, and especially if it’s making noise-the sooner the better. It may be as simple as low tension before the oil is pressurizing the system

@leardi58

Жыл бұрын

@@dannyjohnsonsgarage thank you 👍

Im about to do this on my 96 cobra this weekend, would the process be similar on the cobra? I've been watching this video non stop just to make sure I have it all in my head, just want to make sure this video can be used for reference while im doing it. Thanks again for the video, very helpful regardless.

@dannyjohnsonsgarage

Жыл бұрын

Yeah, exact same process for the primary chains, but your secondary would be different. I have a video showing DOHC removal (but not install) that I’ll link below. The cam holding tools are different for DOHC

@dannyjohnsonsgarage

Жыл бұрын

The primary chains can come off just fine before the secondary kzread.info/dash/bejne/gIhpvJeFYtqno9Y.html

@stellarreach9093

Жыл бұрын

@@dannyjohnsonsgarage Thank you so much for the videos! After cracking everything open I found that the secondary tensioner failed on bank 1. The whole reason I decided to take on this job was for one, the ticking would bother the hell out of me at idle, and two, the engine had a lot of trouble producing power after 5k rpm. Really hope this fixes all of that! Im about 70% done, just had to stop because I had to wait for the cam holders (dont ever use vise grips to stop cams from moving, stupid shortcut I though would work). All thats left is trying to remember where all the nuts and bolts go as I wasn't as organized as I should have been. Valve covers are also a big pain to deal with haha. Thanks again and keep up with the great content!

What engine is that a romeo or windsor ? Im having trouble finding the correct timing set for my 2001 f150 4.6 2v ...ive seen there are two types of chain guides one is metal and has 3 bolt holes and the other is plastic with two bolt holes..please help

@dannyjohnsonsgarage

Жыл бұрын

This is a Romeo engine. The truck engines are Windsor from what I know. This car should have the Windsor (came with it but the previous owner put a new engine in it)

@nayoruiztv1080

Жыл бұрын

@@dannyjohnsonsgarage i have a romeo engine but i dont know when they stopped using the 3 bolt chain guide ..what year is your car?

I got the same chain guide and it has a little play when bolted down is that normal

@dannyjohnsonsgarage

9 ай бұрын

It will have some play until oil pressure is going. The passenger side will have slack and the driver side will be tight because one is upside down so they give tension opposite until oil pressure is flowing

does this happen on the higher hp 4.6? because I've got a lot of friends with Crown Vics that have 300k on their engines and they have zero problems in this department.

@dannyjohnsonsgarage

6 ай бұрын

This is the exact same as the crown Vic internally, so it would be no different

Probably a good time to put on a high performance oil pump

Every time the bell rings, another mustang gets its wings. 😁

@dannyjohnsonsgarage

2 жыл бұрын

😅😅

My otc cam holders were fake ones from the link. Not sure whats up with that

@dannyjohnsonsgarage

28 күн бұрын

Interesting. Mine came with oil marks like it was used for the job and returned.

Great job!! That’s a lot of rtv. Lol.

Why do we need to hold the cams in place with the tool? I thought it wouldn't matter as long as all the chain links match the timing marks

@dannyjohnsonsgarage

2 жыл бұрын

The proper way is to hold the cams in place because as they sit they are compressing some valve springs, and once released those valves will contact the pistons as the engine is out of time (at top dead center there really only should be one on the driver side that is up enough to hurt anything). It shouldn’t really hurt them (some people hold the cams with the wrench and then gently let them softly come to rest and contact pistons. Its the proper way to do it with the cam holding tools, so that’s what I try to show on the channel. If you end up doing other unexpected repairs once you are in there it’s always good to follow those practices (use the cam holding tool, set the engine to top dead center, etc.). At this point there is a lot that can go wrong if someone decides to turn the crank. You shouldn’t bend a valve by hand, but anyway, that’s the idea.

@dylanadkins3491

2 жыл бұрын

@@dannyjohnsonsgarage (for clarification) the engine is out of time, a piston is at the very top. And if we move the cams a valve could contact the piston.

@michaelbrooks2741

Жыл бұрын

I just put that same question ,I just did

I didn't put the cam holder on and my points or face down how can I turn it up

@dannyjohnsonsgarage

Жыл бұрын

Carefully rotate the cam back into place (where it shows in the video holding the cam gear with the 18mm wrench).

Is this the same for f150 4.6l? What is time frame of total job?

@dannyjohnsonsgarage

Жыл бұрын

It should be a similar process, nearly identical. Make sure to have all the parts and gaskets. Without any hold ups, plan for 6-8 hours

Danny I'm lost please help. I'm put a oil pump in my 2004 gr mustang 4 .6. while putting the timing chains back I had to loosen the cam hold down tool to turn the cam so it would go back to the notch on the cam but my wrench slip off so the cam moved is my car motor no good now I don't no what to do it get it back

@sammyburns5792

11 ай бұрын

Thank you Danny for your help please

@sammyburns5792

11 ай бұрын

Do I have to take the head off now. I didn't loose the one one on the right only the the left hold down tool but my wrench slip off so did the chain ty please

@dannyjohnsonsgarage

11 ай бұрын

It should still be fine. It also happened to me. Just take the 18mm wrench and put it on the end of the cam bolt as shown in the video where we are holding it in place. Turn the wrench in the direction to put the dot on the cam gear back to where it should be okay

I install new rimming chains but after installing tensioners could not rotate the engine manually,what I'm missing

@dannyjohnsonsgarage

Жыл бұрын

Are cam holding tools in place keeping the cams from turning?

@AlejandroMartinez-cu7cr

Жыл бұрын

@@dannyjohnsonsgarage the timing chains are new the gears are the old ones new chain guides,new tensioners ,next I'm going to remove heads to see if any valves are bend or something inside cylinders

Can you power wash timing cover and valve cover ?

@dannyjohnsonsgarage

6 ай бұрын

Off of the car, yes. Degrease and make sure it’s fully dry before installing so no moisture is in

@MR20MR

6 ай бұрын

@@dannyjohnsonsgarage thanks a lot . Keep the good work 💯

How did u keep the car from cranking up?

@dannyjohnsonsgarage

5 ай бұрын

Pushing and holding the gas pedal to the floor signals the computer to not start it. However, if you have an aftermarket tune, that feature may have been removed

Question. I saw that you didn’t line the master links up instead you got everything else in place(TDC) and made your own mark?? Is that what you did?? Is that okay to do? Because I honestly don’t see how the heck everyone gets those master links to line up all the way around 🤷🏾‍♂️!!!! I’ll be doing this job on one of my Crown Victorias within the next two weeks.. Thanks in advance for any help and also thanks for this detailed video

@dannyjohnsonsgarage

2 ай бұрын

The master links don’t line up every rotation of the crankshaft, so it’s much faster to make new master link marks on the chain (or use the new chain). As long as you have the timing marks correct with the dot on the cam and the crankshaft and the master links being on exact opposites as you lay the chain out, it will ensure the timing is correct. TDC is important for this with piston 1 on the passenger side being up, and lock the cams with the holding tool you see in the video as well. If you don’t lock the cams the valve spring pressure will release and rotate them. That’s where you would need that 18mm to get it lined back up correctly

@TearItUpFixItTV

2 ай бұрын

@@dannyjohnsonsgaragehey man do you know if this cam holding tool will fit my 97 crown Vic, “w” VIN?? 4.6 2v

@dannyjohnsonsgarage

2 ай бұрын

@@TearItUpFixItTV I’m pretty sure it would, but I can’t say for sure. Just see if there is a free returns policy

@TearItUpFixItTV

2 ай бұрын

@@dannyjohnsonsgarage yeah I’m gonna order from Amazon thru your link, it says free returns I was just looking for a second opinion. If all fails I’ll try vice grips maybe 🤔 Thank You Again Sir 🫡

Almost exactly the same as my CVPI 4.6 that I'm recording for a head job.

@dannyjohnsonsgarage

Жыл бұрын

Yep. It’s exactly the same as the crown Vic

Ive taken mine off without removing coil packs i unplugged them what was the reason for that

@dannyjohnsonsgarage

5 ай бұрын

I took them off for better working room on the cam covers. If you want to work around it that’s fine

@jayskrills7375

5 ай бұрын

I've had to many bolts snap unexpectedly working on my old truck so I try to not take anything off lol

So if you replace the engine in a 01 gt, you should be able to just drop in another 01-04 gt engine. I didn’t hear you mention any computer stuff

@dannyjohnsonsgarage

Жыл бұрын

Yes. It doesn’t matter if it’s auto or manual, both engines are the same. The exception would be the 99-mid year of 2001 may have an 8 bolt crank shaft on the Windsor engine vs the Romeo, so the clutch flywheel may be different. You can even use the same engine for the crown Vic and grand Marquis if you change over the oil pan, valve covers, and all the top engine intake manifold parts

You made it look easy but I wish you had explained why you put the cam gear Mark's in place and marked the chain with the shiny links off the mark but put a new chain on using the chain shiny link not your mark I do know that chain is got to be in time, while you were there was there a reason you didn't replace the oil pump and give the oil strainer some attion, Got to do my 07 3 valve . Thank you for this great video.

@dannyjohnsonsgarage

7 ай бұрын

I made the marks when taking it off just for reference. I always make more marks than I need in case there is a question. The chains should lay out with those marks at exactly opposite ends, which it did. When adding the new chains I used the master links as the marks as they should be. It would have been a good time to do an oil pump but I didn’t. I do have oil pump removal in another video for the 4V but the same process if you want to see it kzread.info/dash/bejne/gIhpvJeFYtqno9Y.htmlsi=w1to5XvEhOIeVsKd

Is it needed to replace chain if guide or tension is broken ?

@dannyjohnsonsgarage

Жыл бұрын

Chain should be ok unless it was rubbing on the tensioner like mine was since it broke through. It’s always a good idea to replace what you can with new parts

@jairohernandez9628

Жыл бұрын

Okay thank you