DAMN IT BOBBY, how do you not have more views ❗❗❗

@Jordancraigmiller

3 жыл бұрын

I wish I knew the answer to that question. 😅

Just sharing my experience with catch cans on these cars. The catch can needs to be on the driver side. At one point i had both jlt catch cans one on passenger side one on driver side. After 5000 miles passenger catch can was still bone dry and driver side had oil.

@olddarkspirit6410

2 жыл бұрын

Exactly!! Why do you think that the can on the passenger side is always dry ?

Very good, informational video. I'd recommend an oil catch can on any high performance car, definitely an important mod to have.

@Jordancraigmiller

3 жыл бұрын

Definitely something all cobras need! Trying to do things right this time around.

Great video! Good info for anyone out there with a built car.

@Jordancraigmiller

3 жыл бұрын

I think it makes since for anyone that plans on keeping a cobra long term! It just saves the engine from getting gunked up which would cause the valves to bake over the years. Was a contributing factor as to why I think I lost my last motor!

@lukhwinderarora6261

3 жыл бұрын

@@Jordancraigmiller Can you make a video on cleaning the valves, my cobra has 100k miles and never had a oil catch, car is stock

@Jordancraigmiller

3 жыл бұрын

@@lukhwinderarora6261 If tour cobra is completely stock it’s probably not that bad. But at 100k miles without having any oil separation you will will run into some slight issues sooner or later. There isn’t really much I could say about cleaning valves other than just to get a reputable machine shop to do it. One that you trust.

Did I get in first today? Happy holidays Jordan, I wish you and your family the best! The series focus st I have has a problem of blowing oil into the intake which eventually settles in the charges pipes. The “first mod” I did was a crank case breather and I have a catch can on order! It seems like a small thing but I’m glad you (and I) figured it out

@Jordancraigmiller

3 жыл бұрын

Yes, you did! Those breathers can be tricky because it's basically a vacuum leak which can throw off the idle and air-fuel ratio. But if it works then it works! Wouldn't work for me with the cam haha the slightest vacuum leak and it destroys my idle.

@Bloodreign137

3 жыл бұрын

@@Jordancraigmiller the breather I got is from CFM and has a check ball in the valve so under vacuum (load) the ball is auctioned shut. I’m not an engineer and I have a lot to learn about cars but I haven’t noticed any loss in boost pressure of anything. I will definitely keep an eye on my air/fuel ratios though, thanks! I could see why with the huge cams it might throw things off for you!

@Jordancraigmiller

3 жыл бұрын

@@Bloodreign137 that’s really cool man I didn’t know they made them with valves in them!

I have one on my Gt. And its only stroked and cam'd for right now. And it does help alot with oil blow by into your intake.

@Jordancraigmiller

3 жыл бұрын

Do you have both sides or just one?

@marine0331inf

3 жыл бұрын

@@Jordancraigmiller just one that i mounted on my fire wall

Now we need David to rereview the car. 2021 is upon us.

Where did you get the rubber hose that you connected to the intake? Mine doesn’t fit exactly either.

I need help. Changing a pcv valve on 04 mach 1 but when I unhook the hose its just a black plastic sitting on the grommet not an actual pcv valve. I tried screwing in the new one I bought but it was getting stuck and in fear of messing up my engine I just put the plastic back on the valve cover. Any help would be greatly appreciated. Thank you.

@Jordancraigmiller

Жыл бұрын

It may have a PCV valve delete kit!

😆“Do not drink oil from your car” - Jordan

Dropping by with a like, comment, and watch from bloodreign2 for the algorithm gods

@Jordancraigmiller

3 жыл бұрын

Hahah I appreciate you! Put a lot of time into SEO on this one! We will see if it makes a difference!

Awsome you got it.drovers side i hope you put it on the drivers side the ones on the passenger side dont do anything noo.wrong side you get no oil there trust me.you need it on the drivers side i have a half can full every 2k miles.

@Jordancraigmiller

3 жыл бұрын

They were out of stock good sir, not my fault. Waiting on it to come in.

@lukhwinderarora6261

3 жыл бұрын

Getting that much oil after 2 k miles, isn’t that excessive blow by?

@Jordancraigmiller

3 жыл бұрын

@@lukhwinderarora6261 depends on how much power you’re making but for the majority of cars yes that’s a little much. But then again, I don’t have one on both sides yet and I haven’t really been able to drive mine much in the past year.

How hard was that head cooling mod to install?

@Jordancraigmiller

2 жыл бұрын

Well that’s not really a cooling mod, just to catch the oil. But it was just tough to fit it in there. Took me a couple of hours.

@undeadbrosm41a39

2 жыл бұрын

I mean the tube hooked to your coolant line to cool cylinder #8. You had to move it out of the way in the video

I did the same thing about 2 years ago .. mines still bone dry !

@Jordancraigmiller

2 жыл бұрын

Did you ever get the driver side? Getting that one soon!

@stephenalexander2427

2 жыл бұрын

@@Jordancraigmiller not yet , I’m just getting a breather

Jlt installing a catch can .plz watch the vid.you need it on the drivers side.i had 1 on each side never hot a drop off the passenger side.i just put a breather on the passenger side.im not trying to be a jerk but you get no fluid on the side you put it on.the drivers side youll fill that can every 1500 miles trust me.....

@Jordancraigmiller

3 жыл бұрын

Did you not notice my response in the prior 2 comments? I'm waiting for it to come in...

@orange1soda

3 жыл бұрын

Ahh ok my bad .i just put on the lfp heat extracters.what a pain but look great.

@lukhwinderarora6261

3 жыл бұрын

Excessive oil collecting in the cans means there is blow by? Correct me if I’m wrong

@Jordancraigmiller

3 жыл бұрын

@@lukhwinderarora6261 yes but some blow by is normal with cobras.

Do you have a discount code for LFP?

@Jordancraigmiller

3 жыл бұрын

I do not, should I get one??? I can ask Mark! Wasn’t sure how much support I would get there but I really like the company and the owner!

@Daywalker78

3 жыл бұрын

@@Jordancraigmiller Can't hurt to ask right? 🤷🏿‍♂️

@Jordancraigmiller

3 жыл бұрын

@@Daywalker78 is that something you would use personally?

@Daywalker78

3 жыл бұрын

@@Jordancraigmiller Absolutely, I was about to buy an oil separator and and EGR block off plate

@Jordancraigmiller

3 жыл бұрын

@@Daywalker78 ok cool I’ll call them back tomorrow! Will drop the link in my next video if I can get one! Video will be out later this week!

You can also replace that passenger side hose with a simple breather(K&N makes a nice one) and plug up the valve on the intake tube. I did that on my Cobra and installed a jlt pcv prefilter over the valve on my driver side...works just fine! Only differences are that you have to clean or replace that breather periodically and the cost is way less than a catch can system.

@Jordancraigmiller

3 жыл бұрын

Those breathers don’t work very well at all with Cammed cobras. Going to get a JLT 3.0 for that side as well once it’s in stock! If it’s the little one I’m thinking if you’re basically creating a vacuum leak.

@tomkjr1

3 жыл бұрын

@@Jordancraigmiller Been running for 5 years without any issues. Venting the crank case is not a vacuum leak. Many cobra owners including track cars run the same setup. In fact many use 2 breathers. I also have a stop valve on my breather which operates just like a pcv valve. Pressure blows out but no intake. This system can save a lot of blown gaskets caused by excessive internal engine pressure.

@Jordancraigmiller

3 жыл бұрын

@@tomkjr1 I've just been told not to use that by everyone who helped me with my car unless I'm making enough power to need one.

@tomkjr1

3 жыл бұрын

@@Jordancraigmiller Obviously both types work since so many use both. Which is better? who knows, maybe neither. Both my Terminators have been modified cars. Not extremely, only into the 600+whp and I've never had an issue with the breathers. If you are bone stock and worried about emissions and passing inspection, then keeping a closed system with catch cans would be the way to go. Since I don't have to worry about that, I like to keep it simple and pretty without too many hoses. I also enjoy the peace of mind in knowing that nothing unwanted could get into my intake tube because the hose is gone!

@the__black__box

3 жыл бұрын

@@tomkjr1 can you link me where i can buy the breathers and the plugs from please? I want some because my cobra blows a little blue smoke on startup usually in the morning. 37k miles. i hope it helps.

Omg you wont get a drop there.plzzzzzz .drivers side you will get half can a week.

@Jordancraigmiller

3 жыл бұрын

They are on back order.

Or you can have a Pcv delete and run breathers.

@Jordancraigmiller

3 жыл бұрын

Those don’t don’t pair very well with cams.

@christopher5863

3 жыл бұрын

@@Jordancraigmiller The system is vented which is all that matters imho, might be some residue but most people constantly obsess and wipe down their engines constantly when cleaning their car.

@Jordancraigmiller

3 жыл бұрын

@@christopher5863 just took me forever to get the car to idle right with cams especially using air conditioning so I wouldn’t want to mess with it personally.

@christopher5863

3 жыл бұрын

@@Jordancraigmiller Yeah my car was tuned after pcv was deleted and breathers added. The guy who does all the engine work for tons of cobras around Illinois told me the catch can and breathers are the same shit. Ones just messier but looks flashy and the others more expensive. Either way they are both better then retaining the stock pcv system for sure.

not Cali approved.... I'm from cali