Just call it the two cut joint. Great work.

@3x3CustomTamar

4 жыл бұрын

Thanks so much! Some commenters are upset I used the word “cut” glad you understood what I meant there

@franknilson180

4 жыл бұрын

@@3x3CustomTamar You're welcome.

@SteveFrenchWoodNStuff

4 жыл бұрын

But it's not 2 cuts.

@bermchasin

4 жыл бұрын

or call it the Snoop Dogg... cause its a REALLY strong joint!

@acerjuglans383

4 жыл бұрын

@@SteveFrenchWoodNStuff apparently we live in the world of alternate facts now.

I would call it Triforce Joint, because the edge looks like a Triforce from Zelda.

@3x3CustomTamar

4 жыл бұрын

It totally does

@djsnowman06

4 жыл бұрын

Exactly what I thought too

@Judson7

4 жыл бұрын

Same.

@ladya1953

4 жыл бұрын

Zelda gets my vote!

@SireSquish

4 жыл бұрын

That was the first thing I thought of as well.

The most impressive part of this great video is the fact that she just used a handsaw and cut a straight line...

@3x3CustomTamar

4 жыл бұрын

Ha. Thanks

@gordonrain7152

4 жыл бұрын

@@3x3CustomTamar I must admit, when she said she was just going to simply use a handsaw to cut that angle I was fully expecting her cut to 'wander' about halfway through the cut, but NO....excellent cut Tamar! And thanks for taking the time to make something seemingly complicated, look simple. Name the cut?...how about 'Bridle Lap'?

@tonyknievel2223

4 жыл бұрын

It was a superhard cut

@andrewlightbody4221

4 жыл бұрын

I commented on that. I was seriously impressed with that

@vasosvacios7694

4 жыл бұрын

Handsaw is a basic carpentry tool, it should be the first thing for one to learn how to use it. In my case y was kind of confused why she didn't do the whole joint with the handsaw and chissels. Anyway, excelent job. PS: look up for videos of japanese carpenters, that a whole other level of handwork.

For a table with 4: "half-lap bridle joints", it helps to remember that this joint has a 'right' and 'left'-hand version, and adjacent joints will have to be opposites, and diagonal corners will be identical. When I mentioned this "half-lap bridle joints" name to my buddy who had never heard of it before, it took him a minute to figure out what it meant, and he described it to me & made it perfectly, except for the dummy center filler, for which he suggested a round-over to a dimple to eliminate the 3 sharp corners (which actually looks quite nice, almost pillow-like). He also realized that all 3 pieces can be cut identically & together at once, so "2 cuts" is effectively 2 cuts TOTAL for each joint, making 8 cuts for the whole table, (not to mention all the trimming & planing & his unique 45deg dough-nut router work instead of the 45deg chamfer).

@youtukang

2 жыл бұрын

👍👍👍

Hello Tamar, this joint is called a Nodus-Knot. It took part in the german woodworking magazine and was shortly discribed in kzread.info/dash/bejne/ZYaLx7FvZZDed5c.html from 1:30 to 2:55 (german language, sorry). They show some projects with the knot in the video kzread.info/dash/bejne/kWGJuq6eZ6a5eKg.html from 3:58 to 5:10. Greetings from Europe, Tom

This video is proof, that you can NEVER have enough clamps.

@TrevorDennis100

4 жыл бұрын

And if you are going to use this joint in a structure like a table, they'd probably need to be pretty long clamps

@ared18t

4 жыл бұрын

I use string

@rusticagenerica

4 жыл бұрын

@@ared18t I prefer monokini

@microcolonel

4 жыл бұрын

@@TrevorDennis100 you can clamp to a clamp

@neilfishingcamp

4 жыл бұрын

Clamp down people. It's just a clamp.

everyone is always so serious. Great look at just 'figuring stuff out' just for the sake of figuring it out. Hats off. Kept up the great work.

@3x3CustomTamar

4 жыл бұрын

Driftless Joinery thanks so much!

Thank you for making what looks impossible possible. I appreciate how you teach in a calm, competent, humane and positive manner. Thank you

To sit down and look at this joint online and copy it means your very smart. I might make comments once and a wile or even a lot but I enjoy watching you and learning new things, dont stop. Everyone has something to offer.

One of few tubers actively pushing skill level in approachable way. I've said it before you'll soon be at the top of the leader board.

@3x3CustomTamar

4 жыл бұрын

That’s so awesome to hear. Thanks!

@riley165

4 жыл бұрын

couldn't have said it better myself!

@wortheffort

4 жыл бұрын

tlfort personal growth is always a competition.

@SR-qg7hw

4 жыл бұрын

wortheffort I would never have considered your remark about her being at the top as making it about competition. I just saw it as your assessment given you’ve obviously been following her for a while and seen how she is always upping her game. It could also be because I’m not competitive!

@cam_shaftgaming1820

4 жыл бұрын

@@wortheffort I love your channel. Been a subscriber for a long time. This is the first video I've seen of hers. I'm now subscribed to you both. I like seeing creators supporting one another. I am in the process of starting my own woodworking business. I've learned a lot from you and now I've learned an amazing joinery technique from this talented lady.

I don’t know which is more impressive, the joint or the fact you figured it out! Awesome skills thanks for sharing.

@3x3CustomTamar

4 жыл бұрын

Ha! Thanks so much! It was really fun to figure out

Also, it's called an "interlocking tenon joint" It is Japanese in origin and does not require glue or fasteners. very strong

@markluni4234

3 жыл бұрын

Thank you for the most intelligent response

@jackdempsy7696

3 жыл бұрын

Of course its Japanese because awesome!

@robertolsen2862

3 жыл бұрын

Yes there are many joints the Japanese have developed so are really amazing !

@babiesdie

3 жыл бұрын

I am making Japanese influenced 3d modern wood art, have plans with measurements, but have no direction but checking out etsy wood makers to cut it. You seem very bright, have any advice of where I could get this done please? Anything helps.

@josepalacid

2 жыл бұрын

I'm just a nerd and I can't see how the last cube could be fixed without glue or fasteners. Maybe the Japanese version is built with using a slightly different technique.

Just watched this again and love your clear, concise presentation. This is a timeless presentation of something that some people would make complicated process. You made it simple enough that even I could reproduce it. Thank you!!

@3x3CustomTamar

2 жыл бұрын

So glad you liked it! Thanks!

This is called a Marasco joint. My high school wood shop teacher already had it made in 1992. He said guaranteed “indestructible”. 😜

@KB-mk9lv

4 жыл бұрын

Very cool

@PrimalRenegade17

4 жыл бұрын

Think thats just what your high school teacher called it. When you google that this video is the only thing that cones up

@muskokagrind7396

4 жыл бұрын

Ronjoe not all of human knowledge is on the internet. It is definitely a Japanese joint, the tried everything 2 millennium ago

@officialteaincorporated243

4 жыл бұрын

@@muskokagrind7396 Not 2 millennium ago, do you mean centuries?

@poopinfruz9771

4 жыл бұрын

@@officialteaincorporated243 No, he means 2 thousand years ago, asia is a very ancient part of the world. The oldest still standing wood temple in japan was completed in the year 607

That is cool. Trilateral Joint. Since it joins three laterals.

@Ripper13F1V

4 жыл бұрын

My vote as well.

@justinwilliams2602

4 жыл бұрын

Trilateral Through Tenon Joint?

You are amazing. I have loved the moment so much that you can even be heard laughing when you are assembling the glued pieces. A big hug and greetings from a small corner of Spain, Barcelona.

Watching you grow and learn as a woodworker is so inspiring to all of us, I’m turning 60 soon and wish I still had that passion 40 years ago! Can’t wait to see what you”ll teach me next.

@3x3CustomTamar

3 жыл бұрын

☺️☺️

A cross between bridal and half-lap joints should be called "the Bridal Lap Dance".

@dalehood3803

4 жыл бұрын

except it's bridle like horse tack not a bride, illiterate

@LibbyK009

4 жыл бұрын

@@dalehood3803 -- So, you have absolutely no sense of humor. Would you rather I wrote something about a horse giving or getting a lap dance? Would that make you *feel* better?

@eetukuru787

4 жыл бұрын

@@dalehood3803 It's a joke, not a dick. Don't take it so hard.

@andywfc1

4 жыл бұрын

@@LibbyK009 theres always one eh ?!!!

@johnstarkie9948

4 жыл бұрын

With the mis-spelling the joke had no meaning. With the correct spelling it would have had no meaning.

Okay maybe that was uncalled for. I have truly learned so much from watching you. You are brilliant and your detailed explanations on why what you are doing works and your reasons for doing it have taught me more than anyone. I can't thank you enough. It also helps that you are far more beautiful than any of your workpieces.

Love all your KZread videos no loud music playing in the background and you clearly explained 👌

Perfect joint for couchtables, where small kids are safe from the sharp edges

@3x3CustomTamar

4 жыл бұрын

Totally agree!

@Heinz76Harald

4 жыл бұрын

just what i thought /thumb up

@you2tooyou2too

3 жыл бұрын

For child safety & beauty, instead of hacking it off for the pleasant flat geometry, I'd router it into a 3/3, 2/3, 1/2, or 1/3 radius hemisphere instead, with NO edges, even on the outer edge of the 3 approaching beams.

@truenorthtransparency5230

3 жыл бұрын

Yes. With 4 small kids this was my first thought.

@replynotificationsdisabled

3 жыл бұрын

Stay alert, stay alive. I tell my kids survival of the fittest, gonna be dumb, gotta be tough.

It’s the triforce joint. Or, Pythagoras’ hemorrhoid.

@supadud3

4 жыл бұрын

or the heroes joint

@jeremyone

4 жыл бұрын

Triforce joint FTW

@bloodybritbastard

4 жыл бұрын

Pythagoras’ hemorrhoid 🤣 🤣🤣 I’ve just spat coffee over my keyboard. You owe me a new one!

@seanmcaleavy2369

4 жыл бұрын

The latter, hahaha

Your channel is becoming my favorite woodworking educational source. Thanks and please keep them coming! 👍👍👍👍

love the way you explore this and think it through, not complain about not having step-by-step instructions! TFP!

@3x3CustomTamar

3 жыл бұрын

🤘🤘

“Tamar’s forensic joinery “ channel. Excellent detective work and even better woodworking ~

@3x3CustomTamar

4 жыл бұрын

Hahah! I feel like I have the most fun when I’m experimenting with stuff like this

@jimmyyounger618

4 жыл бұрын

@@3x3CustomTamar; If I'd run across this Pinterest image on my own, I imagine I'd have chewed my nails for 5 minutes before giving up. Thank God I hit KZread before Pinterest this time. 😄 Could this happen again? "Safety first." Subscribed!

The "triple handshake" is what I'm calling it.

@mbux14

3 жыл бұрын

Threeshim

@peterwilson2143

3 жыл бұрын

I think that would be a great joint for a coffee table, especially in a house with little kids running around

It makes me feel happy to see how much you enjoy what you do. Keep going. Thanks for sharing.

@3x3CustomTamar

3 жыл бұрын

👍👍

Hey Tamar - so happy of how successful and all the cool things are happening for you - the move, the new shop, the jog selling out like crazy and so many mentions of other youtubers. You deserve all of it, and so much more, you're so talented!!! This is a super cool joint and I'll definitely incorporate into my next project!

Great that governments are legalizing joints now

@SoulFoodEqualsMusic

4 жыл бұрын

This one should be illegal.

@fmn2628

4 жыл бұрын

Its a trifecta joint!, just like in the movie pineapple express

@OriginalMomo

4 жыл бұрын

fmn2628 you win the internet

@muradasad6148

4 жыл бұрын

You can smoke this?

@joejoeevans

3 жыл бұрын

I don't always roll a joint. But when I do it's generally my ankle.

I think that would be a great joint for a coffee table, especially in a house with little kids running around

@kenerickson4923

3 жыл бұрын

That was my thought too.

@melancholy5131

3 жыл бұрын

You imagine doing this on all four corners?

@OldNavajoTricks

3 жыл бұрын

As a drunk adult I find your safety concerns exclusionary and discriminatory :-p

@danmalana5529

3 жыл бұрын

Exactly what I was thinking of!

@socraticdisciple1761

2 жыл бұрын

My thought as well.

Very cool. Artistic, strong, and not a rounded-over-around corner. Good job on figuring out how to make it.

I am absolutely going to use this! Thanks for breaking it down in such a simple way.

@3x3CustomTamar

3 жыл бұрын

Awesome

The "I need a joint to figure this out" joint.

@colinlee7089

4 жыл бұрын

childish

@CountDoucheula

4 жыл бұрын

@@colinlee7089 boring

@nowonmetube

4 жыл бұрын

Haha she loves your comment!

@thomasegan456

4 жыл бұрын

Colin Lee Prudish.

Got me with the thumbnail picture, stayed for about 20 more of your videos! Thanks Tamar!

@3x3CustomTamar

4 жыл бұрын

Well that’s awesome to hear! Thanks!

I made it up out of 20mm square pieces of wood using offcuts to get the dimensions of the gaps exact. It helped me get my head around this joint and also to figure out how the left handed version differs from the right.

id love to see a video going over making load bearing structures that are constructed so the load pressing down on them holds the structure together more, a load bearing structure like a table that is intended to and preforms better under intended load.

Absolute respect for this carpenter.

the deconstructed dissected triple half lap royal deluxe II.

@breenhue

4 жыл бұрын

Tomx.. probably exactly what it will get named.. 👍 😊

@dave5194

4 жыл бұрын

DDTHLRD II. Just rolls off the tip of your tongue

@breenhue

4 жыл бұрын

@@dave5194Uuuu naildddddd iT.. Yesssss_s..winnnnA..!.. DDT(ex..terminator II)HLRD

@DavidWindsorDCW

4 жыл бұрын

...royal with cheese deluxe...

@tomx63

4 жыл бұрын

@@DavidWindsorDCW Bravo, Dave Windsor. Bravo.

It is good to see a young lady who is happy to use carpentry skills and is not afraid to use her hands. You have my utmost respect, thank you for sharing the video, on the strength of it I have subscribed.

@3x3CustomTamar

3 жыл бұрын

✌️✌️

Tamar, as always it's a pleasure to watch and listen to you explain the basics of each step and walk us through in a way that we can learn easily and keep coming back for more.

@3x3CustomTamar

3 жыл бұрын

Glad you like it!

The “Wait, how does this fit together?” Joint

@3x3CustomTamar

4 жыл бұрын

Ha

@cpad007

4 жыл бұрын

I love it. Everything's great until you apply glue and then you mess it all up! Been there, done that...will visit it again in my next ww'ing project! LOL Nice job on the joint...pretty cool!

This is quickly becoming maybe my favorite woodworking channel on youtube

@3x3CustomTamar

4 жыл бұрын

Maybe? Ha! Thanks! I really appreciate that!

I'm a cabinet maker, have been for 48 years. I like the way you think about your work, and I'm going to use that joint as a solution to a problem that I've been stewing about . Thanks

@3x3CustomTamar

3 жыл бұрын

Awesome!

Awesome video, I love how you're working at such a high level but also are really relatable and inspiring.

@3x3CustomTamar

3 жыл бұрын

Glad you like it!

Me: "She's gonna create a machine to cut this triangle." She: "Im gonna use handsaw."

@3x3CustomTamar

3 жыл бұрын

Simplest is best sometimes!

@naskirnawas2037

3 жыл бұрын

I don't have a table saw ... maybe a Japanese saw and a chisel can be a solution

@cardiffpicker1

3 жыл бұрын

@@naskirnawas2037 worked for the Japanese for centuries.

@Lazarus-aap

3 жыл бұрын

I don't know what it's called, but I think I would've tried to use that sliding jig that slides through one of the slots next to the blade in a 45⁰ angle and with the saw blade in a 45⁰ angle as well

@davidelliott5843

3 жыл бұрын

That compound angle hand saw cut needed serious skill to keep it correct. I would call it the Jenga Joint.

Looks like a "shin-saver joint" to me! By which, I mean use this joint on a coffee table and save your shins from getting busted on sharp corners! Great work figuring it out. Thanks for sharing!

@3x3CustomTamar

4 жыл бұрын

Totally! Or to keep babies safe too!

@saritshull3909

4 жыл бұрын

And hips on a taller counter

@bradley3549

4 жыл бұрын

@@3x3CustomTamar That was my first thought as well. My wife put little rubber bumpers on everything pointy. This joint sure looks better!

The workmanship is apparently beautiful. Thank you for sharing

I must say you are a very talented woman. I can really appreciate your love for the craft. God Bless

@3x3CustomTamar

3 жыл бұрын

Thanks ☺️

I'd call that joint Fred. It looks like a Fred kind of joint.

@fredeichenauer4568

4 жыл бұрын

Thank you.

@davo7512

4 жыл бұрын

Thank you

@Sig721Tau

4 жыл бұрын

Fred Flintstone?

@BinoDist

4 жыл бұрын

Thank you from my dog, Fred Bull Terrier.

@EternalShadow1667

4 жыл бұрын

Thank you.

How many clamps would you like? “Yes.”

@The_sinner_Jim_Whitney

4 жыл бұрын

Azmah852 You should watch the process of building an acoustic guitar...

@jeffstover9579

4 жыл бұрын

There is no such thing as too many clamps for a woodworker.

@xXshaneharXx

4 жыл бұрын

hahaha

@mattyp80

4 жыл бұрын

The answer to that aswell as motorbikes, guns, handbags, etc is 'n + 1' !!

@tinkomertens7936

4 жыл бұрын

oh no, then you have never watched ILTMS.

just found this digging thru your old stuff. Looks nice and kid friendly.

@3x3CustomTamar

2 жыл бұрын

Yeah!

Thanks for making it easy to understand. Love your videos. Great and clearly strong for bed frame.

Re: " After analyzing it a bit...". "A bit"? Are you kidding? I would have spent a week wondering how that thing was made, and then given up. Congratulations!

@mikamajlund3622

4 жыл бұрын

I culd spend a month and not solved it 😉

Muito útil, adorei esse fica, você é muito inteligente.

Great job! A beautiful property of this joint is that all three pieces are identical. You can also apply this joint to square pieces (by adding a third cut). Doing that makes it fully symmetric.

@JodyMcDonald

Жыл бұрын

I'd like to see the square version too. Got a link?

Wow, I’m new to woodworking and you explained every step perfectly and I can’t wait to try it, thank you!

@3x3CustomTamar

3 жыл бұрын

Awesome to hear! Have fun!

9:18 FBI open up! "Its white oak dust I swear"

@synchrolord

3 жыл бұрын

I can't bring myself to like this

@wbfinley

3 жыл бұрын

I heard a story once of a guy who does carbon fiber work and he carries around LOTS of baking soda and CA glue( they use it a lot for repair work on like airplane props etc ) and he went to a soft ball game in a prison yard ( like a community held league or something...don’t ask me 😂) and when the guards searched his car going out, they saw that white powder and they set off the alarms and the dogs had to come, the whole 9 yards 😂. This made me think of that lol

@DarkMetaOFFICIAL

Жыл бұрын

most underrated comment 😂😂

This reminds me of the type of neck-tie knot I used to rock when I wore a suit to work. I’d call it the Trinity joint after that knot.

Really a cool joint for furniture , like coffee table or some other piece that can show off the intricacy of the joint.

@3x3CustomTamar

3 жыл бұрын

Yeah! It was fun to make!

I am delighted to have stumbled upon this video, I inherited from my parents a Chapo elm table with six chairs and I had always wondered how the assembly worked! The only difference with the model presented here is that the "gaps" are not filled by small cubes but simply left empty, the edges being simply softened. The set still has a great effect on the visitors despite its 45 years old, considering the prices I would be unable to afford it today.... Pierre Chapo is a French designer who made this furniture in the beginning of the seventies.. ( I' m french myself)

@chrisbaker6503

2 жыл бұрын

We we baby

Me: Only wathces gaming on youtube KZread recommendations be like: "THIS JOINT LOOKS COMPLICATED"

@samuelpyke5933

4 жыл бұрын

KZread:...it's got a Triforce

@zebylonwegler4646

4 жыл бұрын

Same

@swordstrafe

4 жыл бұрын

They’re trying to get you to diversify, if you ever fall out of love with gaming you might stop using their platform and they don’t want that, but if you like this other channel and you fall out of love with gaming it’s less likely to impact your usage of KZread and just change the content you watch, this is of no consequence to KZread.

@Icanhasmycheesburger

4 жыл бұрын

@@samuelpyke5933 Triforce-joint. That's what I thought of as well...

@batu5180

4 жыл бұрын

I watch meme and gaming :/

Tamar 1st love your videos and detailed explanations. The successes and failures alike, So relatable! So my son needed is going to Rose Hulman Institute for Technology as an Engineering student. During covid he was tasked to make a project. Starting with a Cad drawing and ending with a final product. We had to document each step. We used this joint (found on your video) to make an end table at each corner of the legs to the top, with a center live edge river pour. - I will send you a picture - This is 1st piece of furniture that i have made in over 20 years (since the kids came into the pic). It was a killer experience working with my son, making memories working on something together. Love that we will have this piece of furniture to help us remember the time. It also rekindled my love for wood working. Thank you for inspiring both. Since then I am have begun to build a wood shop in my office garage. I see myself watching all of your tool and jig videos again and again. Truly thx!

Respect and compliments! Special thanks for so strong will for analytic exploration.

@3x3CustomTamar

3 жыл бұрын

Thanks!

The triforce joint of course!! Awesome!

My grandfather used this joint on table legs but didn't fill that gap with a cube, he used it as a mortise for a tenon from the table top. He also had a way of filling that same gap by cutting one of the pieces with that cube still on - I think it's the piece with its side uppermost that the other two push into.

@markdarragh6620

Жыл бұрын

It seems wrong to hide such cool joinery under a table top.

Me: is bored KZread: name this way of fitting pieces of wood together.

@JohnSmith-li5pj

4 жыл бұрын

i was here at 69 likes

@ssgp7297

4 жыл бұрын

Here at 96

@JohnSmith-li5pj

4 жыл бұрын

@@ssgp7297 same

Beautiful and creative work

I experiment and did this, and it's way cool! I ended up making 12 of these and made an open box. So cool. Now, to figure out how to route dados to make spade for plexi or glass to make a lamp.

The old Three-handed Two-finger Joint.

@Akira-Aerins

4 жыл бұрын

sounds like a drug when you put it that way.

@lesdoidanlzen1691

4 жыл бұрын

@@Akira-Aerins A drug or a totally sober bedroom hobby

@Akira-Aerins

4 жыл бұрын

@@lesdoidanlzen1691 was gonna say that myself buuutt.. You phrased it better.

M.C. Escher stubs his toe on his coffee table Looks down *Inspiration*

@3x3CustomTamar

4 жыл бұрын

Ha!

@ssgtdolan

4 жыл бұрын

There you go, you named it. Call it the "Escher" joint!!

@thehandleiwantedwasntavailable

4 жыл бұрын

Your comment is awesome because I immediately saw the joint and knew it had to be named ‘Escher Joint’ :)

@warptek

4 жыл бұрын

@@ssgtdolan Beat me to it.

Love this joint and its great that you gave credit to the original site, thx.

@3x3CustomTamar

3 жыл бұрын

Glad you like it!

4:27 i love that we live in such a modern age that we have the tools and knowlege to make our lives more difficult. you could just lay it on its side...also if you have a jig, scroll, oscillator, hand or reciprocating saw you can easily cut one of the 3 boards to have a notch instead of a leg this way you wont need to glue an extra square. overall great video, cool rig thing. keep up the great content!

Went down into the comments to say: “IT SHOULD BE A TRI-FORCE JOINT” Only to find out that all the other comments are the same.

Been wanting to build a table and thinking about how I’d do the joints for a solid and sturdy design. I’ve seen a few but this is unnecessarily the best, most unique and beautiful concept I’ve come across. Gonna try it out.

@3x3CustomTamar

4 жыл бұрын

Awesome! good luck with it!

Thanks for the idea

@3x3Custom - Tamar I came here to find out how this could be referred to as "a 2 cut" project. I have no woodworking experience, so I assumed it was a reference to a trade process. Bruce A's explanation of setup & profile cleared it up for me. It makes perfect sense once you know the premise. It's one setup/profile; if your blade were as thick as the area to be removed it would be one pass/one cut. I don't know how anyone could have a problem with you or what you do. I appreciate you as the talented, intelligent, skilled woman that you are. As I said, I don't do woodworking, but I may have a need for a three-legged joint like this. 2.8M views. WOW! Congratulations This video is almost 2 years old, so I'm glad to see that you're still at it I have subscribed because I have an affinity for talent and skill.

@3x3CustomTamar

2 жыл бұрын

Haha yeah. I had no idea that would have been controversial at all when I posted this. 😂😂

You’ve never heard of the “one and a half lap tribridal bevelled corner slap”?

@3x3CustomTamar

4 жыл бұрын

Hahaha!

@BespokeCarpentry

4 жыл бұрын

I like slap lap

@markthompson4225

4 жыл бұрын

@@BespokeCarpentry or a tri-lap

@robertrodriguez1964

4 жыл бұрын

Wait, did someone just put in their Starbucks order?

@Snagglepuss1952

4 жыл бұрын

That’s what I will call it, cheers!

This should be called the “Triforce joint”

@larbmining

4 жыл бұрын

Gene Strong hol up why’d she like this one but not the one a few days ago?

@genestrong177

4 жыл бұрын

Z2ZProductions Muh-er-ur?!

@matthewdisles

4 жыл бұрын

doh. just made a comment to the same effect! :P

@reddsky

4 жыл бұрын

That's exactly what I was about to say! Need points!! 😁

That joint is gorgeous! I need to make a table now!

Very nice. Simple, strong. Well presented. Thank you.

@3x3CustomTamar

3 жыл бұрын

So awesome to hear! Thanks!

When you can look at a joint and/or object and replicate it is when you become closer to being a master woodworker. Very impressive.

@3x3CustomTamar

4 жыл бұрын

Thanks so much! I love figuring this stuff out.

Really impressive that you worked this out from a picture and a bit of SketchUp - nice work ! In Europe (UK at least) we call this a "Pergola" joint and it's usually fixed with force fit dowels. Somewhere in the back of my head I seem to remember this is actually a very old Japanese joinery technique - might be wrong...

@michaelschnittker7388

Жыл бұрын

Definitely something used in Japanese joinery, each guild had their own secret joint and they were way more complicated that this one.

such a poetic joint

Really enjoyed your video, and what a lovely finished job it is too! No question about the strength of this joint either as the stresses are shared equally in each of the directions without compromise to the other pieces. Any stress is counteracted by twice as much resistance. I'm gonna make one of these as a test piece.

@3x3CustomTamar

3 жыл бұрын

Awesome. So glad you liked it! Have fun experimenting!

That joint hurt my brain just looking at it 😱🔥🤦🏼‍♂️

I learned a joint like this jn school but the board cuts were facing inwards. This looks way better.

That was satisfying to watch. This joint is very appealing.

@3x3CustomTamar

3 жыл бұрын

Glad you liked it!

I love it so much I used on building my new workbench.

@3x3CustomTamar

3 жыл бұрын

Awesome!

When you make the final corner cut, you get three off-cuts that are tetrahedral pieces - aka triangular hole fillers, for free. No need to glue in an extra cube, as long as your kerf is on the deep side of the triangular edge (which leaves the off-cuts large enough to fill flush).

@jonm2416

4 жыл бұрын

Stop mansplaining....Yesss! I always wanted to use that word. (I've been watching too many feminist cringe vids)

@caniscerulean

4 жыл бұрын

To be fair, if you look at the picture she got inspired by, it seemed the tetrahedral filler was a darker wood than the planks, and he used a medium stain on the end cuts. (or it just absorbed better/deeper)

@VoltisArt

4 жыл бұрын

@@jonm2416 People with knowledge are allowed to have discussions without gender being involved. You brought that into this thread, nobody else - and you used it wrong.

@timyates6817

4 жыл бұрын

Buncha sexual intellectuals in here

@jonm2416

4 жыл бұрын

@@VoltisArt this is about carpentry dude..why u talking about weak gender shit u commie feminist bastard!

Half lap with a bridal joint. Stranded at the Alter Joint

@flyingscotsman1923

4 жыл бұрын

I believe you mean altar (as in church); alter means to change. I love the name you are suggesting, 'stranded altar joint'.

Tri-joint Love it going to try it for a coffee table

The Tamar joint, of course. Amazing that you figured that out.

Hats off to you for thinking this through. It looks extremely intricate and that makes it a great look for woodworkers. Clearly most of those that have viewed this have zero interest in trying to do it.

I would call it an ORTHOGOANL CHAMFER joint with my Industrial Arts background accentuated with mechanical drafting. Good project and demonstration, well done!!!

Fantastic joint.

Why am I sooo fascinated with this joint?!? I just keep watching it.

@3x3CustomTamar

3 жыл бұрын

Haha glad you like it

I'd call it an Esher joint, since it looks like he drew it.

@Darkwell0071

4 жыл бұрын

Aeryn Boyer great name

@slowerandolder

4 жыл бұрын

We all know whom you mean, but...Escher. Damn spellcheck...

@KB-mk9lv

4 жыл бұрын

Aw man! However I thought it was Escher.

@KB-mk9lv

4 жыл бұрын

Then someone has learned it is called the Marasco joint.

@Iamthe3rik

4 жыл бұрын

I thought the same thing.

And I am watching this with only a handsaw, a hammer, some nails, and a broken chisel. Anytime I watch woodworking from the US there's always a new tool that these guys use

@GaryBickford

4 жыл бұрын

There are some good videos on how to take a broken chisel and bring it back to perfection! :D See also "Grandpa Amu" (If I spelled it right...)

@paul.mucheru

4 жыл бұрын

@@GaryBickford I bet they use more tools to do that ;)

@stanrogers5613

3 жыл бұрын

There's no reason you can't do this joint with nothing more than a ryoba (a Japanese-style saw with both crosscut and rip sides) and a chisel narrower then the slot, along with marking and measuring tools. It won't go quite as quickly, but with patience and care you can get it as clean and as tight as anything you can do with a large, expensive suite of power tools. If you need to dimension your stock, a plane might be useful - but you don't need a Lie-Nielsen jointer plane or anything, a yard-sale/boot-sale Stanley #9½ or similar with a bit of a tuneup (OMG, more work - how will anyone survive it?) will more than do to clean up the sawn surfaces. All it takes is effort and the will to do it - people were doing all of this and more long before power tools were a thing.

that joint is wild, cheers for figuring it out as well.

@3x3CustomTamar

3 жыл бұрын

Thanks! Def a lot of fun

Guys are always impressed with gals with such mechanical skills. the prior video to yours was a guy making a bed frame with a similar approach. I recently have seen guys build pickup truck campers doing some thing similar. except they just glued longer pieces to shorter pieces.. Thank you for reinstilling my faith in the USA.. Keep up the great work.

@3x3CustomTamar

2 жыл бұрын

👍