skill speaks for itself, no hand waving here, only top class production skill mastery

Great planning, layout, and execution of the joint! I love using this joint, strong and glueless if pinned with dowels running at right angles to the corner. Video production is flawless as well! Thank you.

@JWoodworking without a single spoken word you explained multiple ways to get the same result! Thanks

Thank you very much for this idea. I am building two night stands for my wife and this solved the problem of how to fasten the rear two corners of my project. I am going to modify the joint slightly, as well as how I cut it, but this will work awesomely. Very cool!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

You can tell how good a joiner truly is, by how easy they make it look. I only wish I had an ounce of your skill. Many thanks for the video and my humble respect to you.

@j-woodworking9573

3 жыл бұрын

You are so kind. And you can be a great woodworker as long as you have passion. I'm not a professional too. Thanks for watching sir.

@sofiafaiha2558

7 ай бұрын

@@j-woodworking9573 Sir you are so humble,gentle and kind,i wish i could contact you for ,a knoledge sharing!! Thank you so much.

I love how you show different methods to do the same cut. Awesome video!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@renem8130

3 жыл бұрын

I was thinking the same thing. I did these same joints last weekend.. Unfortunately I had to use a skill saw for all these cuts. Band saw would've been nice and easy.

@ivokuraja1930

2 жыл бұрын

@@j-woodworking9573 Da je meni ovakve strojeve!

@Sham1r0

2 жыл бұрын

agree, very informative

@mdsubelahmed7182

2 жыл бұрын

wow

Wonderful work. Your mature skills will be off the charts! Thanks for sharing!

What amazing skills. I love this even though I don't have interest in carpentry. Maestro.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

This is the kind of table you are suposed to hide under when an earthquake hits, not the flimsy nailed crap they sell nowadays. I admire your craftmanship.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@XxxXMylordXxxX

3 жыл бұрын

They still sell these tables. It's just a matter on how much you want to spend on a table.

@dxbgaming4813

3 жыл бұрын

It's about how much you would like to spend, what he did is not simple, perfection is not cheap.

@Amanda_Harper

3 жыл бұрын

...yeah, if you buy from IKEA you’re going to get a simple table, and they have their place. But I know here in Ireland it’s very easy to find a solid wood, joined table; they can be costly depending on materials used but not hard to find.

@edi9892

2 жыл бұрын

I once sat on a metal table and it collapsed under my weight and I'm not fat! Today most things are made really flimsy.

That was awesome... very happy to see how that's done - thank you.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

That is the coolest woodworking joint I've seen for a long time!

Beautiful work! I'm expanding my carpentry skills and trying to learn how to do better legs for tables and desks.

I love your work! Everything you make is incredible .

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

That would go well with a coffee table that has a glass top, show off the detail of the wood work!

@j-woodworking9573

3 жыл бұрын

That's a great idea. I'll give it a try soon. Thanks for watching sir.

@Rorschach1488_

3 жыл бұрын

Nah, fuck glass. Wood and glass don't mix well.

@QuickQuips

3 жыл бұрын

@@j-woodworking9573 A small silicon or transparent rubber disc or knob right in the middle would do a good job suspending the glass.

@PedroHawk1

3 жыл бұрын

@@Rorschach1488_ It all depends on what wood and what glass.

@ukironman1

2 жыл бұрын

First thing that popped into my head.

Thank you for sharing this. You just added a new tool to my woodworking arsenal.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Perfection. Tension to bind, beautiful aesthetics, time tested design that will work precisely as intended.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@Shadowserpant00

3 жыл бұрын

as someone who knows nothing about woodworking, could you explain the benefits of something like this? I'm getting that it's very pretty and has no screws or glue, but is there more to it than that?

@chinaskibukowski7747

3 жыл бұрын

@@Shadowserpant00 The "glue" is the tension created by the tight tolerances of the wood. This style of woodworking was created when there was no such thing as nails or glue. It's time tested and proven to be incredibly strong and as a bonus incredibly beautiful.

@j-woodworking9573

3 жыл бұрын

Thanks for your great explanation sir.

@vbgvbg1133

3 жыл бұрын

@@chinaskibukowski7747 out of curiosity, would this be even stronger if nails and/or glue is added to it?

I love the table saw jig used around 3:50. The placement of the hand was so far away from the blade and in it's own designated spot. It's a very lovely jig.

@Phyoomz

2 ай бұрын

It was an unexpected treat. Gotta make one.

Absolutely perfect. Appreciate the quality workmanship. Keep em coming

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

It's great that you spend more time to reply every comment 😳💯 Love watch'the video though 😇

@j-woodworking9573

3 жыл бұрын

Thanks again sir.

Man imagine back then this was all done with hand tools, absolutely amazing

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@arbalemtur9693

3 жыл бұрын

Here in northeast India we still do it with hand tools, wish have access to all the awesome machine tools, would make life a lot easier :)

@indoorsandout3022

3 жыл бұрын

@@arbalemtur9693 In my area in Ohio (US) there are an ethnic group that refuse to use machines or electricity. They're called Amish. Although I have some machines for woodworking, I prefer using old tools because they are much safer. The Amish use hand tools because of their religion. I'm a blacksmith, so I am working to start a business selling old style tools to the Amish.

@stevepailet8258

3 жыл бұрын

The hardest part of doing this joint is doing good mark out. Really not so hard just paying attention as you go

@stevedjurovich194

3 жыл бұрын

@@stevepailet8258 Yep, once the layout is done and you've got one or two table saw jigs, it's easy. Apart from his use of a chisel to clean up the cuts in the leg, this man isn't a woodworker, but a good machineworker.

Definitely would love this as a glass top table. Nice job.🖤

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@darz_k.

Жыл бұрын

You definitely WOOD love this! ahahaha

i was thinking of making a desk instead of buying one and now im really considering this because it looks relatively simple and effective

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@abdulwaheedshaikh8067

3 жыл бұрын

kzread.info/dash/bejne/aaCltZd7mJvPl7A.html

@abdulwaheedshaikh8067

3 жыл бұрын

kzread.info/dash/bejne/po2BzJWIXa6fd9o.html

I found the joint I'm gunna use for my patio's glass top table!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

You have inspired me to get into wood working. Thank you for sharing your passion and I hope to learn more from you.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

I love that you show multiple techniques for making the same cuts, thank you!!! I would love to have a table saw capable of using a dado stack, but it's not in the budget. Seeing it done both with a normal kerf saw blade as well as a router, opens up more options. Again thank you and great video.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@bijaytamang9044

2 жыл бұрын

@@j-woodworking9573 p

@mdsubelahmed7182

2 жыл бұрын

ok

nice work. planning on building my first workbench, and this joint is probably going in there...... but first need to practice a lot with scrap wood! Thanks a million for ALL your videos! very inspiring for me!

@j-woodworking9573

3 жыл бұрын

Practice makes perfect. I hope you will succeed. Thanks for watching sir.

@mdsubelahmed7182

2 жыл бұрын

top

I've seen this done manually, but never this way. Truly well-done and well-made!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@jackiesharp6610

2 жыл бұрын

V nice BUT he didn't do it by hand - all machine tools except for the chisel!

I appreciate how you show alternatives to creating the cuts needed.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@adbulazizaduomr9969

3 жыл бұрын

د٠كد

That is truly a work of art. Thank you Sir and very well done indeed!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@abdulwaheedshaikh8067

3 жыл бұрын

kzread.info/dash/bejne/aaCltZd7mJvPl7A.html

@abdulwaheedshaikh8067

3 жыл бұрын

kzread.info/dash/bejne/po2BzJWIXa6fd9o.html

Show do milhão mestre!!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Excellent, thanks for sharing this extraordinary way to join three pieces of wood. Thanks a lot.

Love this joinery!!! You do a beautiful job!!!

@j-woodworking9573

3 жыл бұрын

Nice to see you again. Thanks for watching sir.

We thank you for showing us your amazing skills!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@abdulwaheedshaikh8067

3 жыл бұрын

kzread.info/dash/bejne/aaCltZd7mJvPl7A.html

@abdulwaheedshaikh8067

3 жыл бұрын

kzread.info/dash/bejne/po2BzJWIXa6fd9o.html

Lovely, Precise work. Could watch a craftsman like this work all day. An absolute wealth of knowledge, Brilliant. Black Walnut for sure my favourite wood.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@Bee-tj8gc

2 жыл бұрын

what does it do though?

This is the best 3way joint castle I have seen.

incredible job replying to every comment here, woodworking videos are always interesting to watch!

@j-woodworking9573

3 жыл бұрын

As long as you all are interested in my videos it's my pleasure to reply all comments. Thanks for watching sir.

Magnífica. Parabéns pelo trabalho artístico. Grande abraço Brasil

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

great work! i have also made a bedframe with the same castle joint. I found the TOP connecting piece tends to be weak during installation due to the end grain being all the way at the end. ( hard to explain, but who attempts will also notice)

@overthehill9415

2 жыл бұрын

If I'm understanding you right, the top board needs to be running against the grain of the post, not with it?

조인트만드는 영상만 보고 있는데 너무 멋져요. 정말 튼튼해보이고 깔끔하네요. 영상 감사합니다.

@j-woodworking9573

3 жыл бұрын

감사합니다.

@user-th9cr9zv4i

3 жыл бұрын

당신도 시도 할 수있는 것은 어렵지 않습니다

Well, after i am done with a couple projects i am so going to practice these!

My father was carpenter and I still love to watch how they work

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

First of all, great video, informative, high skill, clean and clear work, exactly what you need to see from someone crafting something! Secondly, my apologies if this is a silly question, since l have no experience with woodworking whatsoever, but is there a reason as to why you used 3 planks from 0:25 - 1:20 instead of a bigger one piece?

@j-woodworking9573

3 жыл бұрын

You can make it with bigger ones. I just wanted to show the procedures with 2x4. Thanks for watching sir.

Very nicely done this joint would be great for large and small tables very nice 👍 stay safe 😀👍👍

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir. Please you be safe too.

Incredible! I can't wait to try this out one day!

@j-woodworking9573

3 жыл бұрын

Thanks for watching lady.

It was a fascinating history lesson to me, that nails weren't introduced into Japanese building techniques until late in the game, and one of the first things they did with them after it was introduced was called, "The Nightingale Floorboards," where they built the interior deck of a shogun's house, outside of the bedroom area, with nails and metal flanges so you couldn't walk on it without it squeaking, making sneaking up on the rooms impossible. Before then, even the largest structures in Japan were all made by artisan wood cutters, with skills passed to them by there teacher/father, without a *single nail* to hold them together. Each piece cut with a particular pattern, and then (at most) glued together before they were inserted. The only way to get one of those old buildings to fall apart would be to literally uproot the entire structure, hold it upside down, and then *shake the piss out of it!*

@j-woodworking9573

3 жыл бұрын

Thanks for your kind and long explanation sir. Greetings from Korea.

@somatder

3 жыл бұрын

same for Western construction and woodworking. Until the WW2 metal fasteners were relatively expensive compared to the costs of having a tradesman cutting out wood joints. Metal wew only used where they made sense. Just look at timber framing - all wood joints and pegs! No a single piece of metal fastener!

@landonletterman831

3 жыл бұрын

@@somatder yeah, but it's the whole difference in just slapping some logs on top of one another then add some mud for insulation (by no means an easy process, takes labor), and carving each end piece with a fancy pattern then carving *another* piece with a "female" end and then locking them together (skill on top of labor, and it shows in their architecture)

@ww-pw6di

3 жыл бұрын

@@landonletterman831 It's impressive how you can type so much bullshit with that much confidence.

@somatder

3 жыл бұрын

@@landonletterman831 now, I think there is a bit more to western wooden construction than just "slapping logs on top of each other" how about the timber framed houses in Germany and eastern France, are they just slapped on top each other carelessly?

how does this craftsmanship have 625 dislikes? truly awesome work buddy.

@j-woodworking9573

3 жыл бұрын

Nobody can make everyone satisfied. Thanks for watching sir.

@squirrelmusic9544

3 жыл бұрын

952 now

@Starw90

3 жыл бұрын

they are home depot customer .

@oshkiv4684

3 жыл бұрын

Im guessing most of those just are misclicks

@victorglaviano

3 жыл бұрын

It's not the craftsmanship, it's the filming, lighting and speed of demonstration... I can tell he's never been a teacher or instructor in the military... Crawl, walk, run!

Now that looks like a really solid joint. Nice work J! 👍👍👏👏😉😉

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

nice one... like it... great joint

I love watching these videos - BUT, I do prefer the traditional methods without power tools. Still a quality video though.

@j-woodworking9573

3 жыл бұрын

I want to do without powertools. Thanks for watching sir.

@sawyer7as

3 жыл бұрын

How traditional is wood glue?

@j-woodworking9573

3 жыл бұрын

I have no idea. Thanks for watching sir.

@sammypark333

3 жыл бұрын

@@sawyer7as Wood glue is definitely traditional in East Asian furniture-making - idk about other places, but Korea traditionally uses fish bladder to make their glue (very similar to animal hide glue used in the West)

@j-woodworking9573

3 жыл бұрын

Thanks for you great explanation sir.

This is amazing! Now, how can I make that with just a hammer and a chisel??

@j-woodworking9573

3 жыл бұрын

I'm sorry to hear that. Thanks for watching sir.

@Rustic.illustration

3 жыл бұрын

If you have a saw to hand too, you can do that with those three items

This is insanely beautiful

My bed frame uses this joinery. It was an absolute pleasure putting together.

@j-woodworking9573

3 жыл бұрын

Great. Thanks for watching sir.

i don't even know why i'm watching this

@j-woodworking9573

3 жыл бұрын

Sorry about that. Thanks for watching sir.

Best new harem anime.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

I love how the music blended perfectly with the router's pitch :)

FANTASTIC video ! ! Thanks for sharing it with us.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

beautiful work, well done; but I don't understand the need for the dovetail to join the two pieces. To add strength beyond a single glue joint?

@j-woodworking9573

3 жыл бұрын

Glue can give it enough strength. And dovetail can hold two parts mechanically when glue can't work. Thanks for watching sir.

@alltoone00

3 жыл бұрын

Once upon a time, when there were no metal nails and glue, the traditional Korean-style house was built this way. Even now, when we build a temple, we build it this way. It's earthquake-resistant and beautiful.

@j-woodworking9573

3 жыл бұрын

Thanks for your kind explanation. 감사합니다.

@sfixx

3 жыл бұрын

Is the laminated table leg with butterfly spline stronger than if it was a single solid piece of wood?

@alltoone00

3 жыл бұрын

@@sfixx The most commonly used thing in column head alignment was four-way matching. This method was used when there was no nail or bond in the past(Joseon Dynasty Period). It is a method of connecting columns with beams.

why did you drill and jigsaw the "mortises" rather than just use the dado on the tablesaw from the beginning?

@gaspardois.reiscruz6654

3 жыл бұрын

Serra do Salitre Minas gerais muito bom lindo

@j-woodworking9573

3 жыл бұрын

It is the better way to cut with the table saw from the beginning. But everyone dosen't have a dado blade. So I wanted to show several ways to cut. Sorry I didn't make you satisfied sir.

@matthewstevenson6207

3 жыл бұрын

@@j-woodworking9573 I was not criticizing. I was sincerely curious if there was some subtle reason for your method. Lovely work

@UncleSarkis

3 жыл бұрын

I thought the same thing at first then I realized that he's just showing different methods. I love his craftsmanship and his unique style.

Beautiful. I'm going to do this when I build my workbench.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Not a single word, but all are explained well. Great job! Thanks for sharing your expertise!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Now how do I build a flying ark ship so I can escape planet earth with two of every creature on earth and plenty of Water and plants to sustain us all for eternity?

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@Gramald

3 жыл бұрын

You wait 50 more years and 99% of all life is dead, and you dont need a big "ship". And water there is everywere in the universe! Just life as on Earth you wont find many places. Its a ark, well was a ARK. Now its a dying buring ark.

@isolator9446

3 жыл бұрын

A lot of wood, a lot of joints, a massive globe full with low density gas, percamulture , and vertical garden system, Geodesic Globe, a a los of design, actually is a lot more easier an Huge modualar Hexagón floating on the sea... using the very same bases

@donvandamnjohnsonlongfella1239

3 жыл бұрын

@@Gramald The Earth is the Ark. It's an intergalactic flying ship that got stuck within the suns Gravitational field. All life on earth began in another solar system far far away. The star of that solar system was going super nova and the earth was their escape pod.

@xl000

3 жыл бұрын

The Asians are not in that bible fantasy book you're referring to. They have other story books.

6:24 apology accepted

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

완벽한 사개장부네여 👍 👍

@j-woodworking9573

3 жыл бұрын

항상 감사합니다. 꾸준한 발전을 기원합니다.

Beautiful, ingenious work!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

I'm not sure how this happened, but the saw comes in (at the beginning) in perfect pitch with the song.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

My goodness gracious me, that is totally awesome a true artisan

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Awesome work my friend. Precise and very good solid joint

This is not joinery, this is fusion. They are no longer three pieces, they are one in the same.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@dislexicllama

3 жыл бұрын

@@j-woodworking9573 Not everyone in the comments is a sir, sir :) Thanks for the videos, friend!

@j-woodworking9573

3 жыл бұрын

Thanks friend.

Sad part is I made this exact joinery almost 2 years ago and youtube decided to scrub my video only 56 views 😭

@j-woodworking9573

3 жыл бұрын

I'm sad to hear that too. Thanks for watching sir.

@leonlionheart5927

3 жыл бұрын

@Man Theory Wait.... You try to say that YT removes videos if they havn't enough views??? Really? I'm shocked!

Very nice. Definitely a strong joint!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Undoubtedly, definitely, unique, unprecedented, unparalleled ,talented, intelligent, innovative ,homemade tools , that make the jobs simpler, much easier, yet highly accurate. It’s a reflection of the Master Craftsman vision, explosive mental power, and professional skills of solving problems before they appear.

целый парк инструментов а линейки не завезли, 6:09 вот он лишнее убирает. А вообще полезность видео нулевая, он эту херню сделал либо для ролика либо дз на труд делал.

@untiground

3 жыл бұрын

да и пилил жопой. столько неточностей и тп.

@gidroponchik7436

3 жыл бұрын

Когда коту делать нечего он яйца лижет, а автор не дотягивается и ему приходится этой хуйней заниматься.

@AlekseyLoykuts

3 жыл бұрын

И сверлил зачем-то коряво, наверное оттуда и пошло - глубже запилы пришлось делать, чем изначально мерил, а потом и ровнять все под новые размеры. Ну такое. Можно найти все тоже самое вручную где делают, хоть покайфовать от уровня владения инструментом

So why in the hell are you doing glue up on top of your table saw? The double dovetail makes sense but that can't be your only worktop...& if it is please drop the blade & put down a sheet of ply.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Nice work! I especially like how you showed several ways to hog out all the material.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Brilliant workmanship. Cheers from India 🇮🇳.

At the 1 minute mark, you demonstrated that the bow tie joint you made is loose! Why even make it if it's not tight and snug. Just glue the boards together and it will be just as strong.

@seiichisamura7563

8 ай бұрын

It still serves to make it stronger. It is better than glue alone even if its not good enough as pure joinery.

@sofiafaiha2558

7 ай бұрын

Friend, Its purely educative purpose and we can make it perfect,when we do it for ourself.

Is it me, or some steps are totally useless ??? Like the first machining and gluing...

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Very good looking joint, clever.

That is a lot of glue surface. Like a dovetail joining system. AWESOME!!!!! You never can learn it all in woodwork. I am just about 30 years cabinet maker and can learn something everyday the rest of my life.

Nice one, well appreciated. Bless you.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Ohhhhh.... how very very amazing

Great video! Easy to understand! Thank you!

@j-woodworking9573

2 жыл бұрын

Thanks for watching sir.

Oh WOW it is absolutely a piece of artwork, awesome work

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Inspirador, parabéns!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

I’m building a deck for my back yard and I plan on using this method. Thank you for tutorial!

Great joint, looks hard.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Never realised I would develop a intrest in woodworking it's fascinating

@isaacshenton9330

3 жыл бұрын

It's why I do carpentry and Joinery, I like making stuff.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

@monamody5373

3 жыл бұрын

Yes I am happy to watch more of ur videos

Nice job, very useful method of joining rails to legs, looks good and very strong. Easily translated to hand work. Thanks

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Love the look sir!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

3- MORE to go !!👍🏼AWSOME!!

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

깔꼼한게 보기좋네요

@j-woodworking9573

3 жыл бұрын

감사합니다

You can practically smell the wood watching this video.

Beautiful joinery, I thought it was a lost art.

Simplesmente d+. Show de bola este trabalho.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Very good job sir

Very together...Love the tradition...

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Great, thank you for good video of woodworking.

beautiful joint

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Super. Pięknie Pan to zrobił.

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.

Beautiful just amazing I love your work & wood cutting design

@j-woodworking9573

3 жыл бұрын

Thanks for watching sir.